Search

Made available in DSpace on 2022-04-29T08:45:28Z (GMT). No. of bitstreams: 0 Previous issue date: 2020-01-01 Introduction. Some studies have reported the occurrence of microorganisms isolated from water. Considering these microorganisms, fungi are known to occur ubiquitously in the environment, including water, and some are pathogenic and may cause health problems, especially in immunocompromised individuals. The aim of this study was to identify fungi in hospital water samples and to correlate their presence with the concentration of free residual chlorine. Methods. Water samples (100 mL) were collected from taps (n = 74) and water purifiers (n = 14) in different locations in a university hospital. Samples were filtered through a nitrocellulose membrane and placed on Sabouraud dextrose agar and incubated for 24 hours at 30°C. Fungi were identified according to established methods based on macroscopic and microscopic characteristics (filamentous) and physiological tests (yeasts). Free chlorine residual content was measured at the time of sample collection. Results. Seventy species of fungi were identified in the water samples and about 56% of the water samples contained culturable fungi. Cladosporium oxysporum, Penicillium spinulosum, and Aspergillus fumigatus were the most common filamentous fungi. Aureobasidium pullulans and Candida parapsilosis were the most common yeasts. Chemical analyses revealed that free residual chlorine was present in 81.8% of the samples within recommended concentrations. Among samples from water purifiers, 92.9% showed low levels of free residual chlorine (

Made available in DSpace on 2020-12-12T02:24:21Z (GMT). No. of bitstreams: 0 Previous issue date: 2019-01-01. Added 1 bitstream(s) on 2021-07-15T15:07:34Z : No. of bitstreams: 1 S1516-31802019000600512.pdf: 185752 bytes, checksum: 61644e5a66196ab3b3a568f4d06d4bee (MD5) BACKGROUND: Fungi are ubiquitous in the environment. They are able to grow in water and many of them may be opportunistic pathogens. OBJECTIVE: The aims were to identify fungi in registered wells (RWs) and nonregistered wells (NRWs) that tap into groundwater; and to correlate the results from physicochemical assays on this water (free residual chlorine and pH) with the presence of fungi. DATA AND SETTING: Analytical cross-sectional quantitative study on groundwater wells in São José do Rio Preto, São Paulo, Brazil. METHODS: 52 samples of 500 ml of water were collected from RWs and 107 from NRWs. These were sent to a microbiology laboratory to identify any fungi that were present. In addition, free residual chlorine and pH were measured immediately after sample collection. Several statistical analysis tests were used. RESULTS: Fungal contamination was present in 78.8% of the samples from RWs and 81.3% from NRWs. Filamentous fungi were more prevalent than yeast in both types of wells. There was no significant difference in presence of fungi according to whether chloride and pH were within recommended levels in RWs; or according to whether pH was within recommended levels in NRWs. Furthermore, there was no statistical difference in the levels of fungal contamination between RWs and NRWs. CONCLUSION: Both RWs and NRWs are potential reservoirs for many types of fungi. Many of these may become opportunistic pathogens if they infect immunosuppressed individuals. Furthermore, this study confirms that fungi are able to grow even when chlorine and pH parameters are within the standards recommended. Faculdade de Medicina de São José do Rio Preto (FAMERP) Universidade Estadual Paulista (UNESP) Universidade Federal do Mato Grosso do Sul (UFMS) Adolfo Lutz Institute Regional Laboratory of São José do Rio Preto Department of Infectious and Parasitic Diseases Faculdade de Medicina de São José do Rio Preto (FAMERP) Department of General and Specialized Nursing Escola de Enfermagem de Ribeirão Preto da Universidade de São Paulo (EERP-USP) Institute of Hygiene and Medicine Tropical New University of Lisbon Department of Molecular Biology School of Medicine of São José do Rio Preto Department of Infectious and Parasitic Diseases School of Medicine of São José do Rio Preto Universidade Estadual Paulista (UNESP)

The aquatic environment has received increasing attention regarding the evolution of bacterial resistance, either as a source of resistance genes or as a matrix for the dissemination of these genes. We evaluated the physicochemical, microbiological and antimicrobial resistance characteristics of 160 samples from alternative water well solutions. According to Ordinance 2914/2011 - MS, 44 (27.5%) samples were considered unsafe if at least one physicochemical parameter exceeded permissible limits. Escherichia coli were found in 30.6% of the unregistered housing estates (UHE) and 1.9% of the local sanitary surveillance system (RW). The total of 158 bacterial strains were isolated from 13 (25%) RW and 68 (63%) UHE, 132 of which (83.5%) were obtained from UHE samples. In the investigation of resistance genes, tetA, qnrS and qnrB genes were detected in three, one and eight isolates, respectively. Our results emphasize the importance of constant surveillance and control of the quality of water supplies.

Made available in DSpace on 2018-11-26T17:39:45Z (GMT). No. of bitstreams: 0 Previous issue date: 2017-06-30 Background: Laboratory analysis of organisms in water include arduous methods, such as the multiple tube and membrane filter. The ATP bioluminescence system, proposes a new way of measuring cellular material in water by measuring adenosine triphosphate (ATP) levels, which are expressed in relative light units (RLU). The ATP bioluminescence assay has been increasingly used to assess the microbiological safety of the hospital environment. However, there are few studies investigating the use of this methodology to evaluate the microbiological quality of water. The objective of the present study was to verify whether ATP, as measured by the 3 M (TM) Clean-Trace Water (TM) ATP test, can be used as an alternative tool for presumptive testing for the presence of microorganisms in hospital water. Methods: Water samples (N = 88) were collected from faucets (74) and water purifiers (14) in a university hospital. The sample were filtered by the membrane filter technique (100 mL for bacterial analysis and 100 mL for fungal analysis) and then submitted to ATP bioluminescence assay to the determine quantity of RLU in each sample. In order to compare RLU and the presence of microorganisms, a receiver operating characteristic (ROC) curve was used to calculate sensitivity and specificity (levels higher than 90% were considered significant). In addition, control tests were conducted to compare RLU to the quantities of bacterial and fungal organisms added to distilled water (ANOVA and Tukey's tests; p