Search

Superconducting qubits are one of the most promising physical systems for implementing a quantum computer. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.890 GHz, an energy relaxation time with a median of 502 us and a maximum of (765 +/- 82.6) us, and an echo dephasing time with a median of 541 us and a maximum of (1057 +/- 138) us. We report details of our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry., Comment: 10 pages, 8 figures

Microwave photons are important carriers of quantum information in many promising platforms for quantum computing. They can be routinely generated, controlled, and teleported in experiments, indicating a variety of applications in quantum technology. However, observation of quantum statistical properties of microwave photons remains demanding: The energy of several microwave photons is considerably smaller than the thermal fluctuation of any room-temperature detector, while amplification necessarily induces noise. Here, we present a measurement technique with a nanobolometer that directly measures the photon statistics at millikelvin and overcomes this trade-off. We apply our method to thermal states generated by a blackbody radiator operating in the regime of circuit quantum electrodynamics. We demonstrate the photon number resolvedness of the nanobolometer, and reveal the n(n+1)-scaling law of the photon number variance as indicated by the Bose--Einstein distribution. By engineering the coherent and incoherent proportions of the input field, we observe the transition between super-Poissonian and Poissonian statistics of the microwave photons from the bolometric second-order correlation measurement. This technique is poised to serve in fundamental tests of quantum mechanics with microwave photons and function as a scalable readout solution for a quantum information processor.

We propose a recipe for demonstrating an autonomous quantum heat engine where the working fluid consists of a harmonic oscillator, the frequency of which is tuned by a driving mode. The working fluid is coupled two heat reservoirs each exhibiting a peaked power spectrum, a hot reservoir peaked at a higher frequency than the cold reservoir. Provided that the driving mode is initialized in a coherent state with a high enough amplitude and the parameters of the utilized optomechanical Hamiltonian and the reservoirs are appropriate, the driving mode induces an approximate Otto cycle for the working fluid and consequently its oscillation amplitude begins to increase in time. We build both an analytical and a non-Markovian quasiclassical model for this quantum heat engine and show that reasonably powerful coherent fields can be generated as the output of the quantum heat engine. This general theoretical proposal heralds the in-depth studies of quantum heat engines in the non-Markovian regime. Further, it paves the way for specific physical realizations, such as those in optomechanical systems, and for the subsequent experimental realization of an autonomous quantum heat engine., Comment: Submitted to Nature Scientific Reports

We experimentally demonstrate the fast generation of thermal states of a transmon using a single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable environment. Through single-shot readout, we monitor the transmon up to its third-excited state, assessing population distributions controlled by QCR drive pulses. Whereas cooling can be achieved in the weak-drive regime, high-amplitude pulses can generate Boltzmann-distributed populations from a temperature of 110 mK up to 500 mK within 100 ns. As we propose in our work, this fast and efficient temperature control provides an appealing opportunity to demonstrate a quantum heat engine. Our results also pave the way for efficient dissipative state preparation and for reducing the circuit depth in thermally assisted quantum algorithms and quantum annealing.

Achieving fast gates and long coherence times for superconducting qubits presents challenges, typically requiring either a stronger coupling of the drive line or an excessively strong microwave signal to the qubit. To address this, we introduce on-chip filters of the qubit drive exhibiting a stopband at the qubit frequency, thus enabling long coherence times and strong coupling at the subharmonic frequency, facilitating fast single-qubit gates, and reduced thermal load. The filters exhibit an extrinsic relaxation time of a few seconds while enabling sub-10-ns gates with subharmonic control. Here we show up to 200-fold improvement in the measured relaxation time at the stopband. Furthermore, we implement subharmonic driving of Rabi oscillations with a $\pi$ pulse duration of 12 ns. Our demonstration of on-chip filters and efficient subharmonic driving in a two-dimensional quantum processor paves the way for a scalable qubit architecture with reduced thermal load and noise from the control line., Comment: Main document (15 pages, 5 figures), Supplementary material (10 pages, 7 figures, 1 table)

Achieving fast and precise initialization of qubits is a critical requirement for the successful operation of quantum computers. The combination of engineered environments with all-microwave techniques has recently emerged as a promising approach for the reset of superconducting quantum devices. In this work, we experimentally demonstrate the utilization of a single-junction quantum-circuit refrigerator (QCR) for an expeditious removal of several excitations from a transmon qubit. The QCR is indirectly coupled to the transmon through a resonator in the dispersive regime, constituting a carefully engineered environmental spectrum for the transmon. Using single-shot readout, we observe excitation stabilization times down to roughly $500$ ns, a $20$-fold speedup with QCR and a simultaneous two-tone drive addressing the $e$-$f$ and $f0$-$g1$ transitions of the system. Our results are obtained at a $48$-mK fridge temperature and without postselection, fully capturing the advantage of the protocol for the short-time dynamics and the drive-induced detrimental asymptotic behavior in the presence of relatively hot other baths of the transmon. We validate our results with a detailed Liouvillian model truncated up to the three-excitation subspace, from which we estimate the performance of the protocol in optimized scenarios, such as cold transmon baths and fine-tuned driving frequencies. These results pave the way for optimized reset of quantum-electric devices using engineered environments and for dissipation-engineered state preparation., Comment: 14 pages, 5 figures

Electrostatically tunable Josephson field-effect transistors (JoFETs) are one of the most desired building blocks of quantum electronics. JoFET applications range from parametric amplifiers and superconducting qubits to a variety of integrated superconducting circuits. Here, we report on graphene JoFET devices fabricated with wafer-scale complementary metal-oxide-semiconductor (CMOS) compatible processing based on wet transfer of chemical vapour deposited graphene, atomic-layer-deposited Al$_{2}$O$_{3}$ gate oxide, and evaporated superconducting Ti/Al source, drain, and gate contacts. By optimizing the contact resistance down to $\sim$ 170 $\Omega \mu m$, we observe proximity-induced superconductivity in the JoFET channels with different gate lengths of 150 - 350 nm. The Josephson junction devices show reproducible critical current $I_{\text{C}}$ tunablity with the local top gate. Our JoFETs are in short diffusive limit with the $I_{\text{C}}$ reaching up to $\sim\,$3 $\mu A$ for a 50 $\mu m$ channel width. Overall, our demonstration of CMOS-compatible 2D-material-based JoFET fabrication process is an important step toward graphene-based integrated quantum circuits., Comment: revised manuscript; 30 pages, 4 figures, 1 table, 12 supplementary figures

We propose, and theoretically analyze, a practical protocol for the creation of topological monopole configurations, quantum knots, and skyrmions in Bose--Einstein condensates by employing fictitious magnetic fields induced by the interaction of the atomic cloud with coherent light fields. It is observed that a single coherent field is not enough for this purpose, but instead we find incoherent superpositions of several coherent fields that introduce topological point charges. We numerically estimate the experimentally achievable strengths and gradients of the induced fictitious magnetic fields and find them to be adjustable at will to several orders of magnitude greater than those of the physical magnetic fields employed in previous experimental studies. This property together with ultrafast control of the optical fields paves the way for advanced engineering of topological defects in quantum gases., Comment: Updated references to the literature

We consider a superconducting half-wavelength resonator that is grounded at its both ends and contains a single Josephson junction. Previously this circuit was considered as a unimon qubit in the single-mode approximation where dc-phase-biasing the junction to $\pi$ leads to increased anharmonicity and 99.9% experimentally observed single-qubit gate fidelity. Inspired by the promising first experimental results, we develop here a theoretical and numerical model for the detailed understanding of the multimode physics of the unimon circuit. To this end, first, we consider the high-frequency modes of the unimon circuit and find that even though these modes are at their ground state, they imply a significant renormalization to the Josephson energy. We introduce an efficient method how the relevant modes can be fully taken into account and show that unexcited high-lying modes lead to corrections in the qubit energy and anharmonicity. Interestingly, provided that the junction is offset from the middle of the circuit, we find strong cross-Kerr coupling strengths between a few low-lying modes. This observation paves the way for the utilization of the multimode structure, for example, as several qubits embedded into a single unimon circuit.

Ordered media often support vortex structures with intriguing topological properties. Here, we investigate non-Abelian vortices in tetrahedral order, which appear in the cyclic phase of spin-2 Bose--Einstein condensates and in the tetrahedratic phase of bent-core nematic liquid crystals. Using these vortices, we construct topologically protected knots in the sense that they cannot decay into unlinked simple loop defects through vortex crossings and reconnections without destroying the phase. The discovered structures are the first examples of knots bearing such topological protection in a known experimentally realizable system., Comment: 28 pages, 27 figures. Comments welcome!

We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable low-temperature environment for a superconducting 4.7-GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9-GHz continuous and 10-ns-pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits., Comment: 7 pages, 4 figures

Compact inductor-capacitor (LC) resonators, in contrast to coplanar waveguide (CPW) resonators, have a simple lumped-element circuit representation but usually call for sophisticated finite-element method (FEM) simulations for an accurate modelling. Here we present an simple analytical model for a family of coplanar LC resonators where the electrical properties are directly obtained from the circuit geometry with a satisfying accuracy. Our experimental results on $10$ high-internal-quality-factor resonators ($Q_{\rm i}\gtrsim 2\times 10^{5}$), with frequency ranging roughly from $300\,{\rm MHz}$ to $1\,{\rm GHz}$, show an excellent consistency with both the derived analytical model and detailed FEM simulations. These results showcase the ability to design sub-gigahertz resonators with less than $2\%$ deviation in the resonance frequency, which has immediate applications, for example, in the implementation of ultrasensitive cryogenic detectors. The achieved compact resonator size of the order of a square millimeter indicates a feasible way to integrate hundreds of microwave resonators on a single chip for realizing photonic lattices.

Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of properties that are advantageous for scalability and have recently shown sensitivity and speed promising for qubit readout, but such thermal detectors have not been demonstrated for this purpose. In this work, we utilize an ultrasensitive bolometer in place of a parametric amplifier to experimentally demonstrate single-shot qubit readout. With a readout duration of $13.9~\mu\mathrm{s}$, we achieve a single-shot fidelity of 0.618 which is mainly limited by the energy relaxation time of the qubit, $T_1 = 28~\mu\mathrm{s}$. Without the $T_1$ errors, we find the fidelity to be 0.927. In the future, high-fidelity single-shot readout may be achieved by straightforward improvements to the chip design and experimental setup, and perhaps most interestingly by the change of the bolometer absorber material to reduce the readout time to the hundred-nanosecond level and beyond., Comment: 14 pages, 6 figures

The interplay between coherent and dissipative dynamics required in various control protocols of quantum technology has motivated studies of open-system degeneracies, referred to as exceptional points (EPs). Here, we introduce a scheme for fast quantum-state synthesis using exceptional-point engineering in a lossy chain of three superconducting resonators. We theoretically find that the rich physics of EPs can be used to identify regions in the parameter space that favor a fast and quasi-stable transfer of squeezing and entanglement, or a fast reset of the system. For weakly interacting resonators with the coupling strength $g$, the obtained quasi-stabilization time scales are identified as $1/(2\sqrt{2}g)$, and reset infidelities below $10^{-5}$ are obtained with a waiting time of roughly $6/g$ in the case of weakly squeezed resonators. Our results shed light on the role of EPs in multimode Gaussian systems and pave the way for optimized distribution of squeezing and entanglement between different nodes of a photonic network using dissipation as a resource., Comment: 14 pages, 6 figures

We construct invariants of colored links using equivariant bordism groups of Conner and Floyd. We employ this bordism invariant to find the first examples of topological vortex knots, the knot structure of which is protected from decaying via topologically allowed local surgeries, i.e., by reconnections and strand crossings permitted by the topology of the vortex-supporting medium. Moreover, we show that, up to the aforementioned local surgeries, each tricolored link either decays into unlinked simple loops, or can be transformed into either a left-handed or a right-handed tricolored trefoil knot., Comment: 22 pages, 9 figures. Comments welcome!

The known quantum error-correcting codes are typically built on approximative open-quantum-system models such as Born--Markov master equations. However, it is an open question how such codes perform in actual physical systems that, to some extent, necessarily exhibit phenomena beyond the limits of these models. To this end, we employ numerically exact open-quantum-system dynamics to analyze the performance of a five-qubit error correction code where each qubit is coupled to its own bath. We first focus on the performance of a single error correction cycle covering time scales beyond that of Born--Markov models. Namely, we observe distinct power law behavior of the channel infidelity $\propto t^{2a}$: $a\lesssim 2$ in the ultrashort times $t<3/\omega_{\rm c}$ and $a\approx 1/2$ in the short-time range $3/\omega_{\rm c}

Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures. Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device which allows us to place qubits at least 2 mm apart from each other while maintaining over 50 MHz coupling between the coupler and the qubits. In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings. This leaves space for each qubit to have an individual readout resonator and a Purcell filter needed for fast high-fidelity readout. In addition, the large qubit-qubit distance reduces unwanted non-nearest neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk. Using the proposed flexible and scalable architecture, we demonstrate a controlled-$Z$ gate with $(99.81 \pm 0.02)\%$ fidelity., Comment: 24 pages, 12 figures, Figure 1 updated, Appendix A extended

The field of propagating quantum microwaves has started to receive considerable attention in the past few years. Motivated at first by the lack of an efficient microwave-to-optical platform that could solve the issue of secure communication between remote superconducting chips, current efforts are starting to reach other areas, from quantum communications to sensing. Here, we attempt at giving a state-of-the-art view of the two, pointing at some of the technical and theoretical challenges we need to address, and while providing some novel ideas and directions for future research. Hence, the goal of this paper is to provide a bigger picture, and -- we hope -- to inspire new ideas in quantum communications and sensing: from open-air microwave quantum key distribution to direct detection of dark matter, we expect that the recent efforts and results in quantum microwaves will soon attract a wider audience, not only in the academic community, but also in an industrial environment.

We propose a class of tangled vortex structures, tied from non-Abelian topological vortices, which are immune against decaying through local reconnections and strand crossings that are allowed by the system. We refer to such structures as being topologically protected. We then turn our attention to topological vortices classified by the quaternion group $Q_8$ ($Q_8$-colored links), which are realizable in systems consisting either of the biaxial nematic or the cyclic phase of a spin-2 Bose--Einstein condensate, or of biaxial nematic liquid crystal, and prove the existence of topologically protected $Q_8$-colored links. Remarkably, the strongest invariant we construct, the $Q$-invariant of $Q_8$-colored links, can be used to classify $Q_8$-colored links up to allowed local surgeries on the vortex cores., Comment: 29 pages, 12 figures. Comments welcome!

Microwave technology plays a central role in current wireless communications, standing among them mobile communication and local area networks (LANs). The microwave range shows relevant advantages with respect to other frequencies in open-air transmission, such as low absorption losses and low energy consumption, and it is additionally the natural working frequency in superconducting quantum technologies. Entanglement distribution between separate parties is at the core of secure quantum communications. Therefore, understanding its limitations in realistic open-air settings, specially in the rather unexplored microwave regime, is crucial for transforming microwave quantum communications into a mainstream technology. Here, we investigate the feasibility of an open-air entanglement distribution scheme with microwave two-mode squeezed states. First, we study the reach of direct entanglement transmission in open-air, obtaining a maximum distance of approximately 500 meters in a realistic setting with state-of-the-art experimental parameters. Afterwards, we adapt entanglement distillation and entanglement swapping protocols to microwave technology in order to reduce environmental entanglement degradation. While entanglement distillation helps to increase quantum correlations in the short-distance low-squeezing regime by up to $46\%$, entanglement swapping increases the reach by $14\%$. Then, we compute the fidelity of a continuous-variable quantum teleportation protocol using open-air-distributed entanglement as a resource. Finally, we adapt the machinery to explore the limitations of quantum communication between satellites, where the thermal noise impact is substantially reduced and diffraction losses are dominant.

Superconducting qubits are one of the most promising candidates to implement quantum computers. The superiority of superconducting quantum computers over any classical device in simulating random but well-determined quantum circuits has already been shown in two independent experiments and important steps have been taken in quantum error correction. However, the currently wide-spread qubit designs do not yet provide high enough performance to enable practical applications or efficient scaling of logical qubits owing to one or several following issues: sensitivity to charge or flux noise leading to decoherence, too weak non-linearity preventing fast operations, undesirably dense excitation spectrum, or complicated design vulnerable to parasitic capacitance. Here, we introduce and demonstrate a superconducting-qubit type, the unimon, which combines the desired properties of high non-linearity, full insensitivity to dc charge noise, insensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. We measure the qubit frequency, $\omega_{01}/(2\pi)$, and anharmonicity $\alpha$ over the full dc-flux range and observe, in agreement with our quantum models, that the qubit anharmonicity is greatly enhanced at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13-ns single-qubit gates on two qubits with $(\omega_{01},\alpha)=(4.49~\mathrm{GHz}, 434~\mathrm{ MHz})\times 2\pi$ and $(3.55~\mathrm{GHz}, 744~\mathrm{ MHz})\times 2\pi$, respectively. The energy relaxation time $T_1\lesssim 10~\mu\mathrm{s}$ is stable for hours and seems to be limited by dielectric losses. Thus, future improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible quantum advantage with noisy systems., Comment: Main text: 37 pages,10 figures, 3 tables. Supplementary: 34 pages, 8 figure, 1 table

We propose a computationally efficient method to solve the dynamics of operators of bosonic quantum systems coupled to their environments. The method maps the operator under interest to a set of complex-valued functions, and its adjoint master equation to a set of partial differential equations for these functions, which are subsequently solved numerically. In the limit of weak coupling to the environment, the mapping of the operator enables storing the operator efficiently during the simulation, leading to approximately quadratic improvement in the memory consumption compared with the direct approach of solving the adjoint master equation in the number basis, while retaining the computation time comparable. Moreover, the method enables efficient parallelization which allows to optimize for the actual computational time to reach an approximately quadratic speed up, while retaining the memory consumption comparable to the direct approach. We foresee the method to prove useful, e.g., for the verification of the operation of superconducting quantum processors., Comment: 14 pages, 2 figures

We review the recent progress in direct active cooling of the quantum-electric degrees freedom in engineered circuits, or quantum-circuit refrigeration. In 2017, the invention of a quantum-circuit refrigerator (QCR) based on photon-assisted tunneling of quasiparticles through a normal-metal--insulator--superconductor junction inspired a series of experimental studies demonstrating the following main properties: (i) the direct-current (dc) bias voltage of the junction can change the QCR-induced damping rate of a superconducting microwave resonator by orders of magnitude and give rise to non-trivial Lamb shifts, (ii) the damping rate can be controlled in nanosecond time scales, and (iii) the dc bias can be replaced by a microwave excitation, the amplitude of which controls the induced damping rate. Theoretically, it is predicted that state-of-the-art superconducting resonators and qubits can be reset with an infidelity lower than $10^{-4}$ in tens of nanoseconds using experimentally feasible parameters. A QCR-equipped resonator has also been demonstrated as an incoherent photon source with an output temperature above one kelvin yet operating at millikelvin. This source has been used to calibrate cryogenic amplification chains. In the future, the QCR may be experimentally used to quickly reset superconducting qubits, and hence assist in the great challenge of building a practical quantum computer., Comment: 14 pages, 9 figures, submitted to Annalen der Physik (AdP) 19.11.2021

This paper is dedicated to studying various aspects of topological defects, appearing in mean-field theory treatments of physical systems such as ultracold atomic gases and gauge field theories. We start by investigating topological charge ambiguity and addition of topological charges using the mathematical formalism of covering spaces, which clarifies many aspects these phenomena. Subsequently, we classify topological defect configurations consisting of several monopoles and unknotted ring defects in terms of homotopy groups and fundamental group actions on them, thus generalizing the previous classifications of a single monopole and a single unknotted ring defect. Finally, we examine the decay of multiply charged topological monopoles under small perturbations of the physical system, and analyze the conditions under which multiply charged monopoles are inclined to split into several singly charged monopoles., Comment: Rescaled the figures

Previous studies of photon-assisted tunneling through normal-metal-insulator-superconductor junctions have exhibited potential for providing a convenient tool to control the dissipation of quantum-electric circuits in-situ. However, the current literature on such a quantum-circuit refrigerator (QCR) does not present a detailed description for the charge dynamics of the tunneling processes or the phase coherence of the open quantum system. Here we derive a master equation describing both quantum-electric and charge degrees of freedom, and discover that typical experimental parameters of low temperature and yet lower charging energy yield a separation of time scales for the charge and quantum dynamics. Consequently, the minor effect of the different charge states can be taken into account by averaging over the charge distribution. We also consider applying an ac voltage to the tunnel junction, which enables control of the decay rate of a superconducting qubit over four orders of magnitude by changing the drive amplitude; we find an order-of-magnitude drop in the qubit excitation in 40 ns and a residual reset infidelity below $10^{-4}$. Furthermore, for the normal island we consider the case of charging energy and single-particle level spacing large compared to the superconducting gap, i.e., a quantum dot. Although the decay rates arising from such a dot QCR appear low for use in qubit reset, the device can provide effective negative damping (gain) to the coupled microwave resonator. The Fano factor of such a millikelvin microwave source may be smaller than unity, with the latter value being reached close to the maximum attainable power., Comment: 20 pages, 10 figures

Processes that lead to the critical-current suppression and change of impedance of a superconductor under the application of an external voltage is an active area of research, especially due to various possible technological applications. In particular, field-effect transistors and radiation detectors have been developed in the recent years, showing the potential for precision and sensitivity exceeding their normal-metal counterparts. In order to describe the phenomenon that leads to the critical-current suppression in metallic superconducting structures, a field-effect hypothesis has been formulated, stating that an electric field can penetrate the metallic superconductor and affect its characteristics. The existence of such an effect would imply the incompleteness of the underlying theory, and hence indicate an important gap in the general comprehension of superconductors. In addition to its theoretical value, a complete understanding of the phenomenon underneath the electric-field response of the superconductor is important in the light of the related technological applications. In this paper, we study the change of the characteristics of a superconductor implementing a coplanar-waveguide resonator as a tank circuit, by relating our measurements to the reactance and resistance of the material. Namely, we track the state of the superconductor at different voltages and resulting leakage currents of a nearby gate electrode which is not galvanically connected to the resonator. By comparing the effects of the leakage current and of a change in the temperature of the system, we conclude that the observed behaviour in the superconductor is [...], Comment: 10 pages, 4 figures

The scaleup of quantum computers operating in the microwave domain requires advanced control electronics, and the use of integrated components that operate at the temperature of the quantum devices is potentially beneficial. However, such an approach requires ultra-low power dissipation and high signal quality in order to ensure quantum-coherent operations. Here, we report an on-chip device that is based on a Josephson junction coupled to a spiral resonator and is capable of coherent continuous-wave microwave emission. We show that characteristics of the device accurately follow a theory based on a perturbative treatment of the capacitively shunted Josephson junction as a gain element. The infidelity of typical quantum gate operations due to the phase noise of this cryogenic 25-pW microwave source is less than 0.1% up to 10-ms evolution times, which is below the infidelity caused by dephasing in state-of-the-art superconducting qubits. Together with future cryogenic amplitude and phase modulation techniques, our approach may lead to scalable cryogenic control systems for quantum processors.

The standard weak-coupling approximations associated to open quantum systems have been extensively used in the description of a two-level quantum system, qubit, subjected to relatively weak dissipation compared with the qubit frequency. However, recent progress in the experimental implementations of controlled quantum systems with increased levels of on-demand engineered dissipation has motivated precision studies in parameter regimes that question the validity of the approximations, especially in the presence of time-dependent drive fields. In this paper, we address the precision of weak-coupling approximations by studying a driven qubit through the numerically exact and non-perturbative method known as the stochastic Liouville-von Neumann equation with dissipation. By considering weak drive fields and a cold Ohmic environment with a high cutoff frequency, we use the Markovian Lindblad master equation as a point of comparison for the SLED method and study the influence of the bath-induced energy shift on the qubit dynamics. We also propose a metric that may be used in experiments to map the regime of validity of the Lindblad equation in predicting the steady state of the driven qubit. In addition, we study signatures of the well-known Mollow triplet and observe its meltdown owing to dissipation in an experimentally feasible parameter regime of circuit electrodynamics. Besides shedding light on the practical limitations of the Lindblad equation, we expect our results to inspire future experimental research on engineered open quantum systems, the accurate modeling of which may benefit from non-perturbative methods., Comment: 32 pages, 5 figures, modified version published in New Journal of Physics

The urgent need for reliable simulation tools to match the extreme accuracy needed to control tailored quantum devices highlights the importance of understanding open quantum systems and their modeling. To this end, we compare here the commonly used Redfield and Lindblad master equations against numerically exact results in the case of one and two resonant qubits transversely coupled at a single point to a Drude-cut ohmic bath. All the relevant parameters are varied over a broad range which allows us to give detailed predictions about the validity and physically meaningful applicability of the weak-coupling approaches. We characterize the accuracy of the approximate approaches by comparing the maximum difference of their system evolution superoperators with numerically exact results. After optimizing the parameters of the approximate models to minimize the difference, we also explore if and to what extent the weak-coupling equations can be applied at least as phenomenological models. Optimization may lead to an accurate reproduction of experimental data, but yet our results are important to estimate the reliability of the extracted parameter values such as the bath temperature. Our findings set general guidelines for the range of validity of the usual Born-Markov master equations and indicate that they fail to accurately describe the physics in surprisingly broad range of parameters, in particular at low temperatures. Since quantum-technological devices operate there their accurate modeling calls for a careful choice of methods.

The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environment for a linear resonator mode and observe that the photon number in the environment can dramatically increase both the dissipation and the effective Lamb shift of the mode. Our observations are quantitatively described by a first-principles model which we develop here also to guide device design for future quantum-technological applications. The device demonstrated here can be utilized as a fully rf-operated quantum-circuit refrigerator to quickly reset superconducting qubits., Comment: 15 pages, 10 figures

We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, $|S_{21}|=1$, can be theoretically achieved along a curve where the phase shift is controllable by magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from from $0.07\times\pi$ to $0.14\times\pi$ radians along the full-transmission curve with the input frequency ranging from 6.00 to 6.28~GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications.

Superconducting coplanar-waveguide (CPW) resonators are one of the key devices in circuit quantum electrodynamics (cQED). Their performance can be limited by dielectric losses in the substrate and in the material interfaces. Reliable modeling is required to aid in the design of low-loss CPW structures for cQED. We analyze the geometric dependence of the dielectric losses in CPW structures using finite-element modeling of the participation ratios of the lossy regions. In a practical scenario, uncertainties in the the dielectric constants and loss tangents of these regions introduce uncertainties in the theoretically predicted participation ratios. We present a method for combining loss simulations with measurements of two-level-system-limited quality factors and resonance frequencies of CPW resonators. Namely, we solve an inverse problem to find model parameters producing the measured values. High quality factors are obtainable by properly designing the cross-sectional geometries of the CPW structures, but more accurate modeling and design methods for low-loss CPW resonators are called for major future improvements. Our nonlinear optimization methodology for solving the aforementioned inverse problem is a step in this direction., Comment: Minor revision: Typos corrected in numerical values in Fig. 3, Fig. 4, and Fig. 7

The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of non-linear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be roughly an order of magnitude higher than that of usual linear resonators, increasing flexibility in the design. We find that for typical experimental parameters, the refrigerator is suitable for resetting different qubit types to fidelities above 99.99% in a few or a few tens of nanoseconds depending on the scenario. Thus the refrigerator appears to be a promising tool for quantum technology and for detailed studies of open quantum systems., Comment: 21 pages, 12 figures

A silicon electron pump operating at the temperature of liquid helium has demonstrated repeatable operation with sub-ppm accuracy. The pump current, approximately 168 pA, is measured by three laboratories, and the measurements agree with the expected current ef within the uncertainties which range from 0.2 ppm to 1.3 ppm. All the measurements are carried out in zero applied magnetic field, and the pump drive signal is a sine wave. The combination of simple operating conditions with high accuracy demonstrates the possibility that an electron pump can operate as a current standard in a National Measurement Institute. We also discuss other practical aspects of using the electron pump as a current standard, such as testing its robustness to changes in the control parameters, and using a rapid tuning procedure to locate the optimal operation point.., Comment: 7 pages, 5 figures plus an additional 6 pages with 6 figures of supplementary information

Schemes aimed at transferring individual electrons in semiconductor devices and detecting possible transfer errors have increasing importance for metrological applications. We study the coupling of a superconducting Josephson-junction-based charge detector to an electron island defined by field-effect in silicon. The flexibility of our device allows one to tune the coupling using the detector as an additional gate electrode. We study the reliability of the electron sensor in different device configurations and the suitability of various operation modes for error detection in electron pumping experiments. As a result, we obtain a charge detection bandwidth of 5.87 kHz with unity signal to noise ratio at 300 mK bath temperature., Comment: 7 pages, 6 figures

We analyze charge fluctuations in a parasitic state strongly coupled to a superconducting Josephson-junction-based charge detector. The charge dynamics of the state resembles that of electron transport in a quantum dot with two charge states, and hence we refer to it as a two-level fluctuator. By constructing the distribution of waiting times from the measured detector signal and comparing it with a waiting time theory, we extract the electron in- and out-tunneling rates for the two-level fluctuator, which are severely asymmetric., Comment: 7 pages, 4 figures

We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping rate by nearly four orders of magnitude. The control of the QCR is fully electrical, with the shortest implemented operation times in the range of 10 ns. This experiment constitutes a fast active reset of a superconducting quantum circuit. In the future, a similar scheme can potentially be used to initialize superconducting quantum bits., Comment: 4 pages, 2 figures

We propose an approach to analytically solve the quantum dynamics of bosonic systems. The method is based on reconstructing the quantum state of the system from the moments of its annihilation operators, dynamics of which is solved in the Heisenberg picture. The proposed method is general in the sense that it does not assume anything on the initial conditions of the system such as separability, or the structure of the system such as linearity. It is an alternative to the standard master equation approaches, which are analytically demanding especially for large multipartite quantum systems. To demonstrate the proposed technique, we apply it to a system consisting of two coupled damped quantum harmonic oscillators., Comment: 14 pages, 2 figures

Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tunneling across voltage-biased NIS junctions. We derive an analytical equation that relates the generated power to the applied bias voltage which is the only control parameter of the device. After the setup has been characterized using a standard voltage reflection measurement, the total gain and the noise temperature are extracted by fitting the analytical equation to the microwave power measured at the output of the amplification chain. The 1$\sigma$ uncertainty of the total gain of 51.84 dB appears to be of the order of 0.1 dB., Comment: 5 pages, 3 figures

We determine how to optimally reset a superconducting qubit which interacts with a thermal environment in such a way that the coupling strength is tunable. Describing the system in terms of a time-local master equation with time-dependent decay rates and using quantum optimal control theory, we identify temporal shapes of tunable level splittings which maximize the efficiency of the reset protocol in terms of duration and error. Time-dependent level splittings imply a modification of the system-environment coupling, varying the decay rates as well as the Lindblad operators. Our approach thus demonstrates efficient reservoir engineering employing quantum optimal control. We find the optimized reset strategy to consist in maximizing the decay rate from one state and driving non-adiabatic population transfer into this strongly decaying state., Comment: 11 pages, 5 figures

The impressive progress in fabricating and controlling superconducting devices for quantum information processing has reached a level where reliable theoretical predictions need to account for quantum correlations that are not captured by the conventional modeling of contemporary quantum computers. This applies particularly to the qubit initialization as the process which crucially limits typical operation times. Here we employ numerically exact methods to study realistic implementations of a transmon qubit embedded in electromagnetic environments focusing on the most important system-reservoir correlation effects such as the Lamb shift and entanglement. For the qubit initialization we find a fundamental trade-off between speed and accuracy which sets intrinsic constraints in the optimization of future reset protocols. Instead, the fidelities of quantum logic gates can be sufficiently accurately predicted by standard treatments. Our results can be used to accurately predict the performance of specific set-ups and also to guide future experiments in probing low-temperature properties of qubit reservoirs., Comment: 15 pages, 5 figures. Updated to published version

We review recent precision measurements on semiconductor tunable-barrier electron pumps operating in a ratchet mode. Seven studies on five different designs of pumps have reported measurements of the pump current with relative total uncertainties around $10^{-6}$ or less. Combined with theoretical models of electron capture by the pumps, these experimental data exhibits encouraging evidence that the pumps operate according to a universal mechanism, independent of the details of device design. Evidence for robustness of the pump current against changes in the control parameters is at a more preliminary stage, but also encouraging, with two studies reporting robustness of the pump current against three or more parameters in the range of $\sim\!5 \times 10^{-7}$ to $\sim\!2 \times 10^{-6}$. This review highlights the need for an agreed protocol for tuning the electron pump for optimal operation, as well as more rigorous evaluations of the robustness in a wide range of pump designs., Comment: 18 pages, 8 figures

Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realize an EP in a superconducting microwave circuit consisting of two resonators. The EP is a singularity point of the Hamiltonian, and corresponds to the most efficient heat transfer between the resonators without oscillation of energy. We observe a crossover from underdamped to overdamped coupling via the EP by utilizing photon-assisted tunneling as an \emph{in situ} tunable dissipative element in one of the resonators. The methods studied here can be applied to different circuits to obtain fast dissipation, for example, for initializing qubits to their ground states. In addition, these results pave the way towards thorough investigation of parity--time ($\mathcal{PT}$) symmetric systems and the spontaneous symmetry breaking in superconducting microwave circuits operating at the level of single energy quanta.

We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize measurement speed and fidelity. We experimentally test this measurement protocol using a superconducting qubit coupled to a resonator mode. For a certain measurement time, we observe that the conventional dispersive readout yields close to 100% higher average measurement error than our protocol. Finally, we use an additional resonator drive to leave the resonator state to vacuum if the qubit is in the ground state during the measurement protocol. This suggests that the proposed measurement technique may become useful in unconditionally resetting the resonator to a vacuum state after the measurement pulse., Comment: Includes supplementary information

We theoretically demonstrate that a pair of Dirac monopoles with opposite synthetic charges can be created within a single spin-1 Bose-Einstein condensate by steering the spin degrees of freedom by external magnetic fields. Although the net synthetic magnetic charge of this configuration vanishes, both the monopole and the antimonopole are accompanied by vortex filaments carrying opposite angular momenta. Such a Dirac dipole can be realized experimentally by imprinting a spin texture with a nonlinear magnetic field generated by a pair of coils in a modified Helmholtz configuration. We also investigate the case where the initial state for the dipole-creation procedure is pierced by a quantized vortex line with a winding number k. It is shown that if k = -1, the resulting monopole and antimonopole lie along the core of a singly quantized vortex whose sign is reversed at the locations of the monopoles. For k = -2, the monopole and antimonopole are connected by a vortex line segment carrying two quanta of angular momentum, and hence the dipole as a whole is an isolated configuration. In addition, we simulate the long-time evolution of the dipoles in the magnetic field used to create them. For k = 0, each of the semi-infinite doubly quantized vortices splits into two singly quantized vortices, as in the case of a single Dirac monopole. For k = -1 and k = -2, the initial vortices deform into a vortex with a kink and a vortex ring, respectively., Comment: 7 pages, 5 figures