Search

An efficient solvent-free synthesis of amides by Ca(II) catalyzed Ritter reaction has been reported under microwave irradiation. This green protocol tolerates the substrate diversity and delivers the high yielding amides with minimal loading of inexpensive and more abundant Ca(II) catalyst.

Bent-core mesogens are an important class of thermotropic liquid crystals as they exhibit unusual properties as well as morphologies distinctly different from rodlike mesogens. Two bent-core mesogens with differing center rings namely benzene and thiophene are considered and investigated using high-resolution oriented solid state C-13 NMR method in their liquid crystalline phases. The mesogens exhibit different phase sequences with the benzene-based mesogen showing a B-1 phase, while the one based on thiophene showing nematic and smectic C phases. The 2-dimensional separated local field (2D-SLF) NMR method was used to obtain the C-13-H-1 dipolar couplings of carbons in the center ring as well as in the side-wing phenyl rings. Couplings, characteristic of the type of the center ring, that also provide orientational information on the molecule in the magnetic field were observed. Together with the dipolar couplings of the side-wing phenyl ring carbons from which the local order parameters of the different subunits of the core could be extracted, the bent angle of the mesogenic molecule could be obtained. Accordingly, for the benzene mesogen in its B-1 phase at 145 degrees C, the center ring methine C-13-H-1 dipolar couplings were found to be significantly larger (9.5-10.2 kHz) compared to those of the side-wing rings (1.6-2.1 kHz). From the local order parameter values of the center (0.68) as well as the side-wing rings (0.50), a bent-angle of 130.3 degrees for this mesogen was obtained. Interestingly, for the thiophene mesogen in its smectic C phase at 210 degrees C, the C-13-H-1 dipolar coupling of the center ring methine carbon (2.11 kHz) is smaller than those of the side-wing phenyl ring carbons (2.75-3.00 kHz) which is a consequence of the different structures of the thiophene and the benzene rings. These values correspond to local order parameters of 0.85 for the center thiophene ring and 0.76 for the first side-wing phenyl ring and a bent-angle of 149.2 degrees. Thus, the significant differences in the dipolar couplings and the order parameter values between different parts in the rigid core of the mesogens are a direct consequence of the nature of the center ring and the bent structure of the molecule. The present investigation thus highlights the ability of the C-13 2D-SLF technique to provide the geometry of the bent-core mesogens in a straightforward manner through the measurement of the C-13-H-1 dipolar couplings.

Thiophene based calamitic mesogens are receiving paramount importance due to their applications in functional organic materials. The insertion of thiophene in the core unit favours a large change in mesophase characteristics as well as application properties in contrast to those mesogens with phenyl ring core alone. In this work, we report the structural as well as mesophase characterization of six mesogens which are built with a core of three phenyl rings and thiophene ring. The thiophene ring is placed at one end of the core and varied the other end with alkyl/alkoxy chains to investigate the mesophase characteristics. The molecular structures of representative mesogens are confirmed by means of FT-IR and Two-dimensional solution NMR techniques. An enantiotropic nematic phase is observed in all the cases as supported by HOPM and DSC techniques. The mesophase characteristics such as melting and clearing temperatures and phase stability are discussed. A dramatic increase in nematic phase stability for the...

Novel thiophene mesogens built with two phenyl ring core and alkoxy terminal chains are synthesized by multistep route. The phenyl ring core is connected to thiophene by ester unit at (a) 2-position and (b) 3-position to yield 2-series of mesogens. The structural characterization of them is accomplished by using spectroscopy tools and the mesophase characteristics are evaluated by HOPM and DSC. The 13C chemical shifts of representative mesogens calculated from DFT by quantum chemical calculations are compared with experimental 13C chemical shifts and further utilized for structural assignment of core unit carbons. A good agreement between calculated and experimental values is noticed. An enantiotropic nematic phase is confirmed for all the mesogens and accordingly threaded nematic texture in HOPM is observed and is supported by DSC transition enthalpy values. The mesophase as well as thermal stabilities of the mesogens are discussed with reference to terminal chain length and position of the linking unit ...

Structural characterizations using XRD and C-13 NMR spectroscopy of two rodlike mesogens consisting of (i) three phenyl ring core with a polar cyano terminal and (ii) four phenyl ring core with flexible dodecyl terminal chain are presented. The three-ring-core mesogen with cyano terminal exhibits enantiotropic smectic A phase while the four-ring mesogen reveals polymesomorphism and shows enantiotropic nematic, smectic C, and tilted hexatic phases. The molecular organization in the three-ring mesogen is found to be partial bilayer smectic Ad type, and the interdigitation of the molecules in the neighboring layers is attributed to the presence of the polar terminal group. For the four-ring mesogen, the XRD results confirm the existence of the smectic C and the tilted hexatic mesophases. A thermal variation of the layer spacing across the smectic C phase followed by a discrete jump at the transition to the tilted hexatic phase is also observed. The tilt angles have been estimated to be about 45 degrees in the smectic C phase and about 40 degrees in tilted hexatic phase. C-13 NMR results indicate that in the mesophase the molecules are aligned parallel to the magnetic field. From the C-13-H-1 dipolar couplings determined from the 2D experiments, the overall order parameter for the three-ring mesogen in its smectic A phase has been estimated to be 0.72 while values ranging from 0.88 to 0.44 have been obtained for the four-ring mesogen as it passes from the tilted hexatic to the nematic phase. The orientations of the different rings of the core unit with respect to each other and also with respect to the long axis of the molecule have also been obtained.

Mesophase organization of molecules built with thiophene at the center and linked via flexible spacers to rigid side arm core units and terminal alkoxy chains has been investigated. Thirty homologues realized by varying the span of the spacers as well as the length of the terminal chains have been studied. In addition to the enantiotropic nematic phase observed for all the mesogens, the increase of the spacer as well as the terminal chain lengths resulted in the smectic C phase. The molecular organization in the smectic phase as investigated by temperature dependent X-ray diffraction measurements revealed an interesting behavior that depended on the length of the spacer vis-a-vis the length of the terminal chain. Thus, a tilted interdigitated partial bilayer organization was observed for molecules with a shorter spacer length, while a tilted monolayer arrangement was observed for those with a longer spacer length. High-resolution solid state (13)C NMR studies carried out for representative mesogens indicated a U-shape for all the molecules, indicating that intermolecular interactions and molecular dynamics rather than molecular shape are responsible for the observed behavior. Models for the mesophase organization have been considered and the results understood in terms of segregation of incompatible parts of the mesogens combined with steric frustration leading to the observed lamellar order.

An efficient solvent-free synthesis of various primary amides from alcohols and nitriles through Cu-catalyzed Ritter reaction is presented.

A new biflavonoid, 2,3-dihydroochnaflavone 7,4',7"-tri-O-methyl ether (1) together with two known biflavonoids namely, 2,3-dihydroochnaflavone (2) and ochnaflavone (3) were isolated from the stem bark of Ochna beddomei. The structures were determined by means of spectral and chemical studies.

Three flavonoids, 5,7,2′,3′,4′-pentamethoxyflavone (1), 2′-hydroxy-2,4′,6′-tri methoxychalcone (2) and dihydroskullcapflavone I (3), together with 17,19,20-trihydroxy-5β, 8α H, 9β H,10α-labd-13-en-16,15-olactone (4), a known diterpenoid and six known flavonoids, 5-hydroxy-7,8-dimethoxyflavanone (5), 5-hydroxy-7,8,2′,3′,4′-pentamethoxyflavone (6), 5,2′-dihydroxy-7-methoxyflavanone (7), 5,2′-dihydroxy-7,8-dimethoxyflavone (8), 5,2′-dihydroxy-7-methoxyflavone (9) and 5,2′-dihydroxy-7-methoxyflavone 2′-O-β-d-glucopyranoside (10) were isolated from the whole plant of Andrographis lineata. The structures of these compounds were elucidated on the basis of spectral and chemical studies. Three flavonoids, 5,7,2′,3′,4′-pentamethoxyflavone, 2′-hydroxy-2,4′,6′-trimethoxychalcone and dihydroskullcapflavone I, together with seven known compounds were isolated from the whole plant of Andrographis lineata.

Hydrogen bonding is the most important non-covalent interaction utilised in building supramolecular assemblies and is preferred often as a means of construction of molecular, oligomeric as well as polymeric materials that show liquid crystalline properties. In this work, a pyridine based nematogenic acceptor has been synthesized and mixed with non-mesogenic 4-methoxy benzoic acid to get a hydrogen bonded mesogen. The existence of hydrogen bonding between the pyridyl unit and the carboxylic acid was established using FT-IR spectroscopy from the observation of characteristic stretching vibrations of unionized type at 2425 and 1927 cm(-1). The mesogenic acceptor and the complex have been investigated using C-13 NMR in solution, solid and liquid crystalline states. Together with the 2D separated local field NMR experiments, the studies confirm the molecular structure in the mesophase and yield the local orientational order parameters. It is observed that the insertion of 4-methoxy benzoic acid not only enhances the mesophase stability but also induces a smectic phase due to an increase in the core length of the hydrogen bonded mesogen.