Search

The magnetic characteristics of Fe-based nanocrystalline alloys can be influenced by temperature. The conventional dynamic Jiles–Atherton (J-A) hysteresis model does not take into consideration the impact that temperature has on magnetic characteristics. A novel variable-temperature dynamic J-A hysteresis model is proposed in this paper to effectively address the issue. Firstly, the hysteresis loops of Fe-based nanocrystalline are measured at −50 °C–130 °C and DC state. The five parameters of the J-A hysteresis model are identified at various temperatures using the particle swarm optimization algorithm, and five parameters are fitted as functions of temperature. Subsequently, the five parameters as functions of temperature are introduced into the conventional dynamic J-A hysteresis model to construct a novel variable-temperature dynamic J-A hysteresis model, which can not only reflect the impact of temperature but also accurately calculate the losses. Finally, hysteresis loops and losses of Fe-based nanocrystalline alloy are simulated and calculated at different temperatures and frequencies by the variable-temperature dynamic J-A hysteresis model. Meanwhile, this paper also investigates the trends and percentages of hysteresis loss, excess loss as well as eddy current loss with frequency and temperature. Compared to the results of measured data, the maximum average error of the variable-temperature dynamic J-A hysteresis model is 5.83%. [ABSTRACT FROM AUTHOR]

In an optically pumped alkali vapor cell with a high density of atoms, the attenuation of the pump light generates a spatially non-uniform distribution of the electronic spin polarization of alkali atoms, which is detrimental to biomagnetism applications of magnetometers as well as the hyperpolarization of noble gas atoms. Therefore, in this study, we propose a new scheme to generate a nearly uniform, unsaturated spin polarization region based on counter-propagating pump beams and atomic diffusion. A finite element method-based simulation is used to demonstrate the three-dimensional distribution of the spin polarization in a spherical cell. The effects of cell temperature and pump light power on the homogeneity of the spin polarization are studied. The distribution of spin polarization near the center of the cell is experimentally measured and a 1 cm uniform spin polarization region is achieved in the center of the cell. The uniformity of spin polarization in the center region of the cell increased by 50% compared with single beam pumping. The advantage of our proposed scheme is that it can generate an unsaturated uniform region of spin polarization in the center of a cell using a single species of alkali atoms. [ABSTRACT FROM AUTHOR]

Mu-metal shields are widely used in atomic devices, but their magnetic noise related to loss is the key performance limit. The magnetic noise can be calculated by using complex permeability and the magnetic field intensity in the shield. In this study, Bertotti loss separation is used for the first time to accurately calculate the changes of complex permeability due to the hysteresis loss in different frequencies and magnetic field intensities, and we further consider the change in magnetic field intensity due to the induced eddy current, which also increases the accuracy of the magnetic noise calculation. For extremely low frequencies below 20 Hz, the improved noise simulation model differs from the measured results by less than 11%. If the loss separation is not considered, the difference between the measured value and the simulated value would be as high as 54%. The high agreement between the calculation and the experimental results proves the accuracy of the proposed method. Our method can be used in the design and optimization of low-noise magnetic shields to improve the sensitivity of atomic devices [ABSTRACT FROM AUTHOR]

Ultra-sensitive multi-channel optically pumped atomic magnetometers based on the spin-exchange relaxation-free (SERF) effect are powerful tools for applications in the field of magnetic imaging. To simultaneously achieve ultra-high spatial resolution and ultra-high magnetic field sensitivity, we proposed a high-resolution multi-channel SERF atomic magnetometer for two-dimensional magnetic field measurements based on a digital micro-mirror device (DMD) as the spatial light modulator for a single vapor cell. Under the optimal experimental conditions obtained via spatial and temporal modulation of the probe light, we first demonstrated that the average sensitivity of the proposed 25-channel magnetometer was approximately 25fT/Hz 1/2 with a spatial resolution of 216µm. Then, we measured the magnetic field distribution generated by a gradient coil and compared the experimentally obtained distributions with those calculated via finite element simulation. The obtained g value of 99.2% indicated good agreement between our experimental results and the theoretical calculations, thereby confirming that our proposed multi-channel SERF magnetometer was effective at measuring magnetic field distributions with an ultra-high spatial resolution.

An acousto-optic modulation (AOM) detection method is demonstrated to detect the atomic Larmor precession frequency in an all-optical K-Rb atomic magnetometer operated in Spin-Exchange Relaxation Free (SERF) regime. Magnetic field sensitivity of 14 fT/Hz 1/2 was achieved by employing the uniform design (UD) [Acta Math Appl Sin.3, 363 (1980)] and subsequently optimizing the AOM modulation conditions. Results were compared to those of Faraday and the balanced polarimetry method in the same magnetometer. The AOM detection method has several advantages, such as small volume, no extra magnetic shielding for the modulator, high measurement signal-to-noise ratio and stability. It has a good prospect for compact and multi-channel atomic magnetometers.