Search

New vaccine platforms that properly activate humoral immunity and generate neutralizing antibodies are required to combat emerging and re-emerging pathogens, including influenza virus. Biomaterial scaffolds with macroscale porosity have demonstrated tremendous promise in regenerative medicine where they have been shown to allow immune cell infiltration and subsequent activation, but whether these types of materials can serve as an immunization platform is unknown. We developed an injectable immunization platform that uses a slurry of antigen-loaded hydrogel microparticles that anneal to form a porous scaffold with high surface area for antigen uptake by infiltrating immune cells as the biomaterial degrades to maximize humoral immunity. Antigen-loaded-microgels elicited a robust cellular humoral immune response, with increased CD4+T follicular helper (Tfh) cells and prolonged germinal center (GC) B cells comparable to the commonly used adjuvant, aluminum hydroxide (Alum). By simply increasing the weight fraction of polymer material, we enhanced material stiffness and further increased antigen-specific antibody titers superior to Alum. Vaccinating mice with inactivated influenza virus loaded into this more highly crosslinked formulation elicited a strong antibody response and provided better protection against a high dose viral challenge than Alum. Thus, we demonstrate that by tuning physical and chemical properties alone, we can enhance adjuvanticity and promote humoral immunity and protection against a pathogen, leveraging two different types of antigenic material: individual protein antigen and inactivated virus. The flexibility of the platform may enable design of new vaccines to enhance innate and adaptive immune cell programming to generate and tune high affinity antibodies, a promising approach to generate long-lasting immunity against specific pathogens.

Microporous annealed particle (MAP) scaffolds are flowable, in situ crosslinked, microporous scaffolds composed of microgel building blocks and were previously shown to accelerate wound healing. To promote more extensive tissue ingrowth before scaffold degradation, we aimed to slow MAP degradation by switching the chirality of the crosslinking peptides from L- to D-amino acids. Unexpectedly, despite showing the predicted slower enzymatic degradation in vitro, D-peptide crosslinked MAP hydrogel (D-MAP) hastened material degradation in vivo and imparted significant tissue regeneration to healed cutaneous wounds, including increased tensile strength and hair neogenesis. MAP scaffolds recruit IL-33 type 2 myeloid cells, which is amplified in the presence of D-peptides. Remarkably, D-MAP elicited significant antigen-specific immunity against the D-chiral peptides, and an intact adaptive immune system was required for the hydrogel-induced skin regeneration. These findings demonstrate that the generation of an adaptive immune response from a biomaterial is sufficient to induce cutaneous regenerative healing despite faster scaffold degradation.

Techniques to analyze and sort single cells based on functional outputs, such as secreted products, have the potential to transform our understanding of cellular biology, as well as accelerate the development of next generation cell and antibody therapies. However, secreted molecules rapidly diffuse away from cells, and analysis of these products requires specialized equipment and expertise to compartmentalize individual cells and capture their secretions. Herein we describe methods to fabricate hydrogel-based chemically-functionalized microcontainers, which we call nanovials, and demonstrate their use for sorting single viable cells based on their secreted products at high-throughput using only commonly accessible laboratory infrastructure. These nanovials act as solid supports which facilitate attachment of a variety of adherent and suspension cell types, partition uniform aqueous compartments, and capture secreted proteins. Solutions can be exchanged around nanovials to perform fluorescence immunoassays on secreted proteins. Using this platform and commercial flow sorters, we demonstrate high-throughput screening of stably- and transiently-transfected producer cells based on relative IgG production. Chinese Hamster Ovary (CHO) cells sorted based on IgG production regrew and maintained a high secretion phenotype over at least a week, yielding >40% increase in bulk IgG production rates. We also sorted hybridomas and B lymphocytes based on antigen-specific antibody production. Hybridoma cells secreting an anti-hen egg lysozyme (HEL) antibody were recovered from background cells, enriching a population of ~4% prevalence to >90% following sorting. Leveraging the high-speed sorting capabilities of standard sorters, we sorted >1,000,000 events in less than an hour. IgG secreting mouse B cells were also sorted and enriched based on antigen-specific binding. Successful sorting of antibody-secreting B cells combined with the ability to perform single-cell RT-PCR to recover sequence information suggests the potential to perform antibody discovery workflows. The reported nanovials can be easily stored and distributed amongst researchers, democratizing access to high-throughput functional cell screening.

Intramyocardial injection of hydrogels offers great potential for treating myocardial infarction (MI) in a minimally invasive manner. However, traditional bulk hydrogels generally lack microporous structures to support rapid tissue ingrowth and biochemical signals to prevent fibrotic remodeling toward heart failure. To address such challenges, a novel drug-releasing microporous annealed particle (drugMAP) system is developed by encapsulating hydrophobic drug-loaded nanoparticles into microgel building blocks via microfluidic manufacturing. By modulating nanoparticle hydrophilicity and pregel solution viscosity, drugMAP building blocks are generated with consistent and homogeneous encapsulation of nanoparticles. In addition, the complementary effects of forskolin (F) and Repsox (R) on the functional modulations of cardiomyocytes, fibroblasts, and endothelial cells in vitro are demonstrated. After that, both hydrophobic drugs (F and R) are loaded into drugMAP to generate FR/drugMAP for MI therapy in a rat model. The intramyocardial injection of MAP gel improves left ventricular functions, which are further enhanced by FR/drugMAP treatment with increased angiogenesis and reduced fibrosis and inflammatory response. This drugMAP platform represents a new generation of microgel particles for MI therapy and will have broad applications in regenerative medicine and disease therapy.

Production of high-energy lipids by microalgae may provide a sustainable, renewable energy source that can help tackle climate change. However, microalgae engineered to produce more lipids usually grow slowly, leading to reduced overall yields. Unfortunately, tools that enable the selection of cells based on growth while maintaining high biomass production, such as well-plates, water-in-oil droplet emulsions, and nanowell arrays do not provide production-relevant environments that cells experience in scaled-up cultures (e.g. bioreactors or outdoor cultivation farms). As a result, strains that are developed in the lab often do not exhibit the same beneficial phenotypic behavior when transferred to industrial production. Here we introduce PicoShells, picoliter-scale porous hydrogel compartments, that can enable >100,000 individual cells to be compartmentalized, cultured in production-relevant environments, and selected based on growth and biomass accumulation traits using standard flow cytometers. PicoShells consist of a hollow inner cavity where cells are encapsulated, and a porous outer shell that allows for continuous solution exchange with the external environment so that nutrients, cell-communication factors, and cytotoxic cellular byproducts can transport freely in and out of the inner cavity. PicoShells can also be placed directly into shaking flasks, bioreactors, or other production-relevant environments. We experimentally demonstrate that Chlorella sp. and Saccharomyces cerevisiae grow to significantly larger colony sizes in PicoShells than in water-in-oil droplet emulsions (P < 0.05). We have also demonstrated that PicoShells containing faster biomass accumulating Chlorella clonal colonies can be selected using a fluorescence-activated cell sorter and re-grown. Using the PicoShell process, we select a Chlorella population that accumulates biomass 8% faster than does an un-selected population after a single selection cycle.

Biomaterial scaffolds represent a promising approach for material-based tissue regeneration. We previously developed microporous annealed particle (MAP) hydrogels - a flowable, microparticle-based hydrogel in which neighboring hydrogel particles are linked in situ to form a porous scaffold that accelerates wound healing. To promote more extensive tissue ingrowth before scaffold degradation, we aimed to slow scaffold degradation by switching the chirality of the crosslinking peptides from L-peptides to D-peptides. Unexpectedly, despite showing the predicted slower enzymatic degradation in vitro, D-peptide crosslinked MAP hydrogel (D-MAP) hastened material degradation in vivo and imparted significant tissue regeneration to healed cutaneous wounds, including increased tensile strength and hair neogenesis. By themselves, D-chiral peptides were poor activators of macrophage innate immune signaling in vivo, but MAP particles elicit IL-33 type 2 myeloid cell recruitment which is amplified in vivo in the presence of D-peptides. Remarkably, D-MAP elicited significant antigen-specific immunity against the D-chiral peptides, and an intact adaptive immune system was required for the hydrogel-induced skin regeneration. These findings demonstrate that the generation of an adaptive immune response from a biomaterial is sufficient to induce cutaneous regenerative healing despite faster scaffold degradation.

Techniques to analyze and sort single cells based on functional outputs, such as secreted products, have the potential to transform our understanding of cellular biology, as well as accelerate the development of next generation cell and antibody therapies. However, secreted molecules rapidly diffuse away from cells, and analysis of these products requires specialized equipment and expertise to compartmentalize individual cells and capture their secretions. Herein we demonstrate the use of suspendable microcontainers to sort single viable cells based on their secreted products at high-throughput using only commonly accessible laboratory infrastructure. Our microparticles act as solid supports which facilitate cell attachment, partition uniform aqueous compartments, and capture secreted proteins. Using this platform, we demonstrate high-throughput screening of stably- and transiently-transfected producer cells based on relative IgG production as well as screening of B lymphocytes and hybridomas based on antigen-specific antibody production using commercially available flow sorters. Leveraging the high-speed sorting capabilities of standard sorters, we sorted >1,000,000 events in less than an hour. The reported microparticles can be easily stored, and distributed as a consumable reagent amongst researchers, democratizing access to high-throughput functional cell screening.

The CRISPR-based technology has revolutionized genome editing in recent years. This technique allows for gene knockout and evaluation of function in cell lines in a manner that is far easier and more accessible than anything previously available. Unfortunately, the ability to extend these studies to in vivo syngeneic murine cell line implantation is limited by an immune response against cells transduced to stably express Cas9. In this study, we demonstrate that a non-integrating lentiviral vector approach can overcome this immune rejection and allow for the growth of transduced cells in an immunocompetent host. This technique enables the establishment of a von Hippel-Lindau (VHL) gene knockout RENCA cell line in BALB/c mice, generating an improved model of immunocompetent, metastatic renal cell carcinoma (RCC). Keywords: immunocompetent mouse model, ccRCC, RENCA, kidney cancer, CRISPR/Cas9, non-integrated lentivirus, immunotherapy

Despite successful demonstration of linear polyethyleneimine (lPEI) as an effective carrier for a wide range of gene medicine, including DNA plasmids, small interfering RNAs, mRNAs, etc., and continuous improvement of the physical properties and biological performance of the polyelectrolyte complex nanoparticles prepared from lPEI and nucleic acids, there still exist major challenges to produce these nanocomplexes in a scalable manner, particularly for lPEI/DNA nanoparticles. This has significantly hindered the progress toward clinical translation of these nanoparticle-based gene medicine. Here the authors report a flash nanocomplexation (FNC) method that achieves continuous production of lPEI/plasmid DNA nanoparticles with narrow size distribution using a confined impinging jet device. The method involves the complex coacervation of negatively charged DNA plasmid and positive charged lPEI under rapid, highly dynamic, and homogeneous mixing conditions, producing polyelectrolyte complex nanoparticles with narrow distribution of particle size and shape. The average number of plasmid DNA packaged per nanoparticles and its distribution are similar between the FNC method and the small-scale batch mixing method. In addition, the nanoparticles prepared by these two methods exhibit similar cell transfection efficiency. These results confirm that FNC is an effective and scalable method that can produce well-controlled lPEI/plasmid DNA nanoparticles.

Inhibiting specific gene expression by short interfering RNA (siRNA) offers a new therapeutic strategy to tackle many diseases, including cancer, metabolic disorders, and viral infections, at the molecular level. The macromolecular and polar nature of siRNA hinders its cellular access to exert its effect. Nanoparticulate delivery systems can promote efficient intracellular delivery. Despite showing promise in many preclinical studies and potential in some clinical trials, siRNA has poor delivery efficiency, which continues to demand innovations, from carrier design to formulation, in order to overcome transport barriers. Previous findings for optimal plasmid DNA delivery cannot be generalized to siRNA delivery owing to significant discrepancy in size and subtle differences in chain flexibility between the two types of nucleic acids. In this review, we highlight the recent advances in improving the stability of siRNA nanoparticles, understanding their intracellular trafficking and release mechanisms, and applying judiciously the promising formulations to disease models.

Delivery to the proper tissue compartment is a major obstacle hampering the potential of cellular therapeutics for medical conditions. Delivery of cells within biomaterials may improve localization, but traditional and newer void-forming hydrogels must be made in advance with cells being added into the scaffold during the manufacturing process. Injectable, in situ cross-linking microporous scaffolds are recently developed that demonstrate a remarkable ability to provide a matrix for cellular proliferation and growth in vitro in three dimensions. The ability of these scaffolds to deliver cells in vivo is currently unknown. Herein, it is shown that mesenchymal stem cells (MSCs) can be co-injected locally with microparticle scaffolds assembled in situ immediately following injection. MSC delivery within a microporous scaffold enhances MSC retention subcutaneously when compared to cell delivery alone or delivery within traditional in situ cross-linked nanoporous hydrogels. After two weeks, endothelial cells forming blood vessels are recruited to the scaffold and cells retaining the MSC marker CD29 remain viable within the scaffold. These findings highlight the utility of this approach in achieving localized delivery of stem cells through an injectable porous matrix while limiting obstacles of introducing cells within the scaffold manufacturing process.

A community health survey was conducted to describe the current health status and preventive health practices of National Guard military employees and their dependants residing in the Eastern region of Saudi Arabia. In a cross-sectional survey in 2010, data were collected via a questionnaire interview and direct physical measurements. A total of 1339 adults aged ≥ 14 years completed the survey (mean age 30.7 (SD 12.7) years). About two-thirds of the sample had problems of overweight and obesity, while 50% had high serum lipids and psychiatric disorders. Hypertension and diabetes were detected in 9.0% and 9.1% of the participants respectively and 15.8% were smokers. The rates of complete immunization and breastfeeding of children were 88.9% and 80.2% respectively and 21.7% of the women had ever used oral contraceptives. However, only 6.5% of the women had ever had a mammogram and 13.4% a cervical smear. The survey results provide a baseline from which to strengthen many public health policies and programmes.

Nanoparticle-mediated gene delivery is a promising alternative to viral methods; however, its use in vivo, particularly following systemic injection, has suffered from poor delivery efficiency. Although PEGylation of nanoparticles has been successfully demonstrated as a strategy to enhance colloidal stability, its success in improving delivery efficiency has been limited, largely due to reduced cell binding and uptake, leading to poor transfection efficiency. Here we identified an optimized PEGylation scheme for DNA micellar nanoparticles that delivers balanced colloidal stability and transfection activity. Using linear polyethylenimine (lPEI)-g-PEG as a carrier, we characterized the effect of graft length and density of polyethylene glycol (PEG) on nanoparticle assembly, micelle stability, and gene delivery efficiency. Through variation of PEG grafting degree, lPEI with short PEG grafts (molecular weight, MW 500–700 Da) generated micellar nanoparticles with various shapes including spherical, rodlike, and wormlike nanoparticles. DNA micellar nanoparticles prepared with short PEG grafts showed comparable colloidal stability in salt and serum-containing media to those prepared with longer PEG grafts (MW 2 kDa). Corresponding to this trend, nanoparticles prepared with short PEG grafts displayed significantly higher in vitro transfection efficiency compared to those with longer PEG grafts. More importantly, short PEG grafts permitted marked increase in transfection efficiency following ligand conjugation to the PEG terminal in metastatic prostate cancer-bearing mice. This study identifies that lPEI-g-PEG with short PEG grafts (MW 500–700 Da) is the most effective to ensure shape control and deliver high colloidal stability, transfection activity, and ligand effect for DNA nanoparticles in vitro and in vivo following intravenous administration.