Search

In this study, a versatile method for the manufacturing of chitosan-grafted porous poly (L-lactic acid) (P-PLLA) nanofibrous membrane by using polydopamine (PDA) as an intermediate layer has been developed. P-PLLA fibreswere electrospun and collected as nano/micro fibrous membranes. Highly porous fibres could serve as a substrate for chitosan to adsorb heavy metal ions. Moreover, PDA was used to modify P-PLLA surface to increase the coatinguniformity and stability of chitosan. Due to the very high surface area of P-PLLA membranes and abundant amine groups of both PDA and chitosan, the fabricated membranes were utilized as adsorbent for removal of copper(Cu2+) ions from the wastewater. The adsorption capability of Cu2+ ions was examined with respect to the PDA polymerization times, pH, initial metal ion concentration and time. Finally, the equilibrium adsorption data of chitosan-grafted membranes fitted well with the Langmuir isotherm with the maximum adsorption capacity of 270.27 mg/g.

In this research article, the PVDF (polyvinylidene fluoride)–PANI (polyaniline)–titanium nanotube (TNT) based nanocomposite membranes were synthesised through phase inversion method. The composition and structural properties of nanocomposite membranes were characterised by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscope (SEM). The significant properties of synthesised membranes such as distribution of pore size, thermal properties, mechanical properties, and photocatalytic behaviour of membranes were also studied. The hydrophilic properties of the composite membranes increased with filler content (PANI-TNT) and results in improved pure water flux (484.8 ± 2.9 L/m2 h−1) compared to that (312.0 ± 1.91 L/m2 h−1) of the pure PVDF membrane. The pure PVDF and nanocomposite membrane were further analysed in terms of their filtration properties such as adsorption of dyes (methyl orange, Allura red) and UV self-cleaning properties. The newly developed nanocomposite membranes showed excellent pollutant removal efficiency (~90%). The synthesised nanocomposite membranes also showed photocatalytic activities due to the presence of TNTs, and adsorption of methyl orange (MO) reduces significantly with the UV light irradiations. The UV self-cleaning property of the composite membrane was further confirmed due to their high flux recovery ratio of about 94%. The results show that embedded PANI-TNT within nanocomposite was photo-catalytically active and degrade the dye molecules from the surface of the nano composite membrane.

The research in textiles is being driven by ecology, economy, and functionality. Therefore, the present research is focused on the development of multifunctional textiles that consume minimum energy during their processing, eco-friendly chemicals for functionalization, and use short processing steps. Eco-friendly cross-linkers such as butanetetracarboxylic acid and zinc oxide nanoparticles are used to impart wrinkle recovery, antibacterial activity, ultraviolet (UV) protection, bending rigidity, and antistatic properties to cotton fabric just in one step. The treated fabric has been characterized with Fourier-transform infrared spectrophotometer, scanning electron microscope, and X-ray diffractometer. Wrinkle recovery, tear strength, antibacterial activity, UV protection, and antistatic properties were tested with AATCC 66-1990, ASTM D 1224, AATCC 147, AATCC 183, and UNI EN 1149, respectively. The treated fabric shows excellent functional properties up to 20 washing cycles.

Chitosan crosslinked with 3-aminopropyltriethoxysilane was coated on porous poly (L-lactic acid) nanofibrous membrane to remove dyes from wastewater in the present study. The adsorption capacity of the composite membrane for the removal of methylene blue and rhodamine B was comprehensively studied. Large porous framework provided a high surface area to effectively immobilize the cross-linked chitosan on nanofibrous membranes. Batch trials were performed to evaluate the adsorption behaviour of membranes with variable crosslinking ratio, pH, initial concentration, temperature and time. Moreover, the adsorbent membranes before and after adsorption were characterized using scanning electron microscopy, x-ray energy dispersive analysis, and Fourier transform infrared spectrophotometer. Under optimum parameters, the adsorbent showed the removal capacity of 86.43 and 82.37 mg/g for rhodamine B and methylene blue, respectively. Isothermal and kinetic experiments showed that Langmuir isotherm and pseudo second order kinetics correlated best with adsorption data. Finally, the mechanism of adsorption and reusability of membrane for five cycles was studied.

Porous poly(L-lactic acid) (PLLA) nanofibrous membrane with the high surface area was developed by electrospinning and post acetone treatment and used as a substrate for deposition of chitosan. Chitosan was coated onto porous nanofibrous membrane via direct immersion coating method. The porous PLLA/chitosan structure provided chitosan a high surface framework to fully and effectively adsorb heavy metal ions from water and showed higher and faster ion adsorption. The composite membrane was used to eliminate copper ions from aqueous solutions. Chitosan acts as an adsorbent due to the presence of aminic and hydroxide groups which are operating sites for the capture of copper ions. The maximum adsorption capacity of copper ions reached 111.66 ± 3.22 mg/g at pH (7), interaction time (10 min) and temperature (25 °C). The adsorption kinetics of copper ions was established and was well agreed with the second-order model and Langmuir isotherm. Finally, the thermodynamic parameters were studied.