Search

Sustainable agricultural practices need to be continuously sought after so that a greater number of producers can adopt them, taking into account, above all, the food security scenario, land use efficiency, and climate change. Intercropping—a cultivation system in which two or more species are grown in close proximity in the same field—is one strategy to increase diversity in the agroecosystem. However, for intercropping systems to be adopted, their productive and economic advantages over monoculture must be clearly demonstrated. Banana (Musa sp.) growers are interested in crop diversification as a potential strategy to increase production yields and, consequently, economic income. The management of banana crops can be facilitated by intercropping, as this system plays an important role in increasing biodiversity and reducing the need for weed control in the crop rows, promoting better land use efficiency. However, this system should be evaluated alongside other indicators. Banana intercropping has significant potential and many benefits, but success depends on the interaction between the component species, appropriate management practices, and favorable environmental conditions. This review aims to provide an overview of recent studies on banana intercropping systems, focusing on the contextualization of land use, monoculture and intercropping, and evaluating intercropping indicators, as well as the benefits, risks, and disadvantages discussed in the literature, and the main outcomes of banana-based intercropping systems. The main findings relate to the possibility of using intercrops with aromatic species and the preliminary reports on the contributions of intercrops to the suppression of Fusarium wilt disease.

Bananas are one of the most consumed fruits in the world and are essential for food security and in the agricultural economy. Their sustainable production is vital for many communities. Herein, the effects of banana cultivars, cropping systems (monocropping and intercropping with lemongrass), and the interaction between these factors on the physicochemical characteristics of ripe and unripe fruit were evaluated. The intercropping of bananas with lemongrass did not alter the main quality indicators of the fruit. The ripe fruits of the SCS451 Catarina cultivar stood out for their higher fruit mass, pulp/peel ratio, and firmness, while the fruits of the Prata Anã and BRS FHIA Maravilha cultivars had the highest SS, SS/TA ratio, pH, and reducing and total sugars. The cultivar SCS451 Catarina had the highest mineral content in the unripe fruit, and for all cultivars, the order of mineral levels was K > N > Mg > P > Ca > Fe > Zn. The higher content of total and resistant starch in the unripe fruit of the Prata Anã and BRS FHIA Maravilha cultivars, combined with the characteristics of the ripe fruit, make them suitable for both fresh consumption and industrial use. Diversifying cultivars improves the quality of banana fruit, and intercropping with lemongrass can be a sustainable method of managing banana fields.

The choice of training system impacts the architecture and physiological characteristics of grapevines, affecting grape production and quality. Continuous studies are necessary to optimize viticulture production in Brazil. This study aimed to evaluate the effects of rootstocks and different training systems on the production and quality of ‘IAC 138-22 Máximo’ and ‘BRS Violeta’ grapevines for juice and wine. The experiment was conducted over two productive cycles (2019/2020 and 2020/2021) in an experimental vineyard at the Advanced Center for Fruit Research as part of the Agronomic Institute (IAC), in Jundiaí, São Paulo, Brazil (23°06′ S, 46°55′ W, and 745 m altitude). For each cultivar, a randomized block design in a 2 × 2 factorial scheme was used, with two rootstocks (‘IAC 766 Campinas’ and 106-8 ‘Mgt’) and two training systems (low and high trellises), with five blocks of three plants per experimental plot. In both cycles, the gas exchange and grapevine production, the chemical characteristics of the grape juice (must), and the chemical compounds in the berry skins were evaluated. The rootstocks and training systems influenced the variables evaluated in both cultivars, with the high trellis system providing the best results. This approach increased the photosynthetic rate, improved water-use efficiency, elevated grapevine production, and enhanced fruit quality. Therefore, its use is recommended for training grapevines. Regarding rootstocks, the best scion–rootstock affinity was found between hybrid grapevines and ‘IAC 766 Campinas’.

The objective of this work was to study the biomass production and chemical composition of the different parts of the cassava plant during the first and second vegetative cycles, with the aim of providing data that can contribute to the understanding of the response of cassava cultivars to different harvest ages. The experimental design consisted of randomized blocks in split plot scheme. Plots were represented by cultivars IAC 90 and IAC 118-95 and subplots by crop age (2, 4, 6, 8, 10, 12, 14, 16, and 18 months after planting). Our results showed that the ‘IAC 90’ allocated a higher proportion of assimilates to the leaves, stem and planted cutting than the ‘IAC 118-95’, which was more efficient in allocating dry matter to the storage roots. Storage roots showed an increase of more than 50% in starch content 14 months after planting. The cultivar IAC 118-95 is distinguished by the higher harvest index, allowing earlier harvesting, with possible valorisation of the leaves as industrial raw material. Variables showed different degrees of inter-relationships amongst themselves. Total plant fresh matter and dry matter yields were positively correlated with growth parameters and root starch for both cultivars. Harvest time and cultivar are key factors that should be considered to increase profits in the cassava agro-industrial chain.

Aim of study: To address diversification of citrus cultivars to increase the variety and profitability of orchards to adapt them to environmental changes. Area of study: State of São Paulo, a subtropical region of southeastern Brazil. Material and methods: The study evaluated the phenological intervals, thermal sum, vegetative and productive performance, and fruit quality of the sweet orange cultivars ‘Rubi’ (R), ‘Lue Gin Gong’ (LGG) and ‘Valencia Delta Seedless’ (VDS) grafted onto 'Rangpur' lime (RL) and 'Swingle' citrumelo (SC). The field experiment was conducted over consecutive growing seasons 2018-2021. Main results: The duration of the phenological intervals was little influenced by the rootstocks. The harvest time was approximately 245 days after anthesis (DAA) for R, 402 DAA for LGG, and 407 DAA for VDS, regardless of rootstock. Scion cultivars grafted onto RL showed larger canopy volumes and greater weight, length, and diameter of fruits than those of SC trees, and the combinations with SC were more productively efficient than RL due to lower canopy volume. The R scion cultivar presented superior yield performance and fruit colouration than LGG and VDS. The physicochemical quality of the fruits showed improved results with the combinations of LGG/RL, LGG/SC, VDS/RL, and VDS/SC. Research highlights: These results may be useful when planning the diversification of scion/rootstock combinations for new orchards, identifying dual-market orange cultivars for industrial processing and natural consumption, and determining the combinations that are better adapted to undesirable climatic conditions.

Fried foods occupy a large portion of the fast-food market. However, growing consumer health awareness is driving research to minimize the oil content of products. The use of specific barriers such as hydrocolloid coatings can avoid high oil absorption. Herein, the physicochemical characteristics of banana fruit cultivars and the effects of hydrocolloid coatings on the quality attributes of banana chips were evaluated. The unripe fruits were analyzed for length, diameter, mass, pulp/peel ratio, firmness, and color. The pulps were analyzed for moisture, total and reducing sugars, crude fat, total soluble solids, pH, titratable acidity, and maturation index. Pulp slices were coated before frying with four hydrocolloid solutions: guar gum, carboxymethylcellulose, sodium alginate, and maltodextrin. The fruits of the cultivar BRS Platina were larger, with a more yellowish pulp and those of FHIA 18 had smaller lengths and diameters. After frying, higher moisture losses were observed in the control and in the treatment with maltodextrin. Hydrocolloids promoted reductions in oil absorption from 26.54 to 9.14%, in addition to changes in the color and hardness of the chips. A coating pretreatment can be used to produce low-fat banana chips, with better results using guar gum. Our results are useful in expanding the commercialization of fruits that fall easily and the chip coating technology can be applied in snack industries.

The limited scion-rootstock combinations used in sweet orange orchards in Brazil reduce the commercial potential of citrus and lead to greater susceptibility to pests and diseases. Aiming to provide germplasm diversification, the research evaluated the Folha Murcha (FM) and Charmute de Brotas (CB) orange trees grafted onto ‘Rangpur’ lime (RL) and ‘Swingle’ citrumelo (SC) rootstocks. The study was conducted in the southern center of the state of São Paulo, in the subtropical region of southeastern Brazil. The grafted trees were planted in September 2016. The field experiment was conducted over two seasons. The combinations were evaluated based on the duration in days and degree-days of the phenological intervals, growth and yield performance, alternate bearing, fruit ripening, and quality. The trees of the two scion cultivars grafted onto RL had the shortest crop cycle, the earliest fruit ripening, and the largest canopy volume. SC produced fewer alternate bearings with greater production efficiency. The CB/SC combination produced fruits with a better color index, higher total soluble solids content, and a higher technological index. This assessment can be useful in planning orchards for dual-purpose markets, such as table fruit and the juice industry.

ABSTRACT: The application of zinc fertilizers in the soil has been an agronomic practice to correct Zn deficiency in plants, aiming to increase productivity and/or nutritional quality. This study evaluated how zinc sulfate fertilization affects plant growth, yield performance and nutrient accumulation in the cassava ‘IAC 576-70’. The experimental design was in randomized blocks with eight replications. The treatments consisted of 0, 1.5, 3.0, 4.5 and 6.0 g p1-1 ZnSO4. Results showed improvement in yield with soil fertilization with ZnSO4, with the optimal dose of 2.5 g pl-1. The uptake of nutrients in plant parts is favored with lower doses of zinc fertilizer, with maximum points ranging from 0.8 to 3.2 g pl-1 for macronutrients and 1.6 to 3.6 g pl-1 for micronutrients. The Zn content in tuberous roots increases by more than 40% with fertilization up to 2.8 g pl-1 of fertilizer, which contributes to the nutritional value of roots.

Abstract Brazil is a major producer of bananas, being the world's fourth-largest producer. The fruit is a source of minerals and vitamins and, when green, has a high content of resistant starch. Among the possibilities of processing, green banana flour has gained prominence due to its physical, nutritional, and functional characteristics, which can be used for the making of different food products. However, the raw material and the processing steps can influence these characteristics. Thus, this study aimed to provide information ranging from the choice of raw material to the sensory acceptance of consumers. The present work discussed the influence of ripening on fruit characteristics, processing stages and flour characteristics as a result of the different used fruits part or cultivar/variety of banana, and the possibilities of products with good technological quality and sensory acceptance of products made with green bananas flours by Brazilian consumers. One of the main differences provided by the cultivar is the flour yield, which is higher in banana cultivars with lower moisture content and selected for frying. There is little information regarding the whole green banana flour, which could reduce waste and contribute nutritionally to preparations. New products having green banana flours as an ingredient show wide possibilities for a partial or total replacement to other flours, as well as good sensory acceptance, which has led to a growing interest in banana processing and its growing market.

Abstract The constant need for innovation in the food industries to meet the demands of consumers and the growing market for gluten-free and high-protein products have driven studies of mixed flour. In this study, 'BRS Platina' banana fruits were processed to obtain Whole Green Banana Flour (WGBF) and Green Banana Pulp Flour (GBPF) as well as leaves of Ora-pro-nóbis Flour (OPNF). Mixed flours were prepared by blending banana flours (WGBF or GBPF) with increasing levels of OPNF (from 5 to 25%). Flours were analyzed for physicochemical characteristics, mineral contents, Water Absorption Index (WAI), Water Solubility Index (WSI), and color. The main component of banana flours was starch, in which GBPF has the highest content. The WGBF had a higher mineral content, and in both flours, the potassium was at a greater level. OPNF showed the highest protein and mineral contents. Independent of the type of banana flour, mixed flours were darker, and had higher WAI and considerable increases in Mg, Fe, and Zn than no mixed ones. The blend of banana flours and Ora-pro-nóbis leaf flour can be a viable combination for preparing a variety of food products, due to its nutritional and technological properties.

Starch (ST) is the main determinant of cassava root industrial quality and is routinely quantified using the specific gravity (SG) method, which is simple but lacks precision. This study aimed to estimate the dry matter (DM) and ST content in nine modern cassava genotypes using the SG method and to develop updated empirical equations that relate SG values with DM and ST content. Two field experiments were conducted using a randomized block design with nine genotypes, nine to ten harvest periods, and four replicates. The correlation between root SG and DM was stronger than that between root SG and ST; however, harvest seasonality strongly influenced this relationship. Genotypes varied in their earliness of ST accumulation in the roots, and genotype-specific equations estimated root DM and ST with greater accuracy than equations based on pooled data from all genotypes. Furthermore, the equations from the literature were less accurate in estimating the root DM and ST content than the equations generated in this study. Therefore, these equations can be used by processing industries to improve the predicted cassava root DM and ST content; however, it may be necessary to include the percentage of ST that industries cannot remove from fresh cassava roots during processing.

Citrus scion/rootstock combinations alter the concentration of bioactive compounds in orange juice. The shelf life of freshly squeezed juice can be maximized through packaging and storage. The profiles of ascorbic (AA), dehydroascorbic acid (DHAA), and phenolic compounds were analyzed in juices of four sweet orange scions, Sanguínea de Mombuca (SM), Rubi (R), Lue Gin Gong (LGG), and Valência Delta Seedless (VDS), grafted onto ‘Rangpur’ lime (RL) and ‘Swingle’ citrumelo (SC) rootstocks. The juices obtained from the combination of the ‘Rubi’ orange in both rootstocks stood out by their higher concentration of ascorbic acid (AA) and dehydroascorbic acid (DHAA). Overall, all SC-grafted scions showed higher AA and DHAA and some phenolic compound concentrations. In all combinations, phenolic compounds showed the highest concentrations in the juices at the time of fruit extraction and decreased during storage. Dark packaging provided higher bioactive compounds in juices stored for longer periods. These findings can contribute to the diversification of scion/rootstock cultivars in order to increase the variety of orchards by choosing the best combinations for pasteurized orange juice with higher nutritional value.

Starch is widely used in the food and non-food industries, and this is related to its physicochemical characteristics. In the coming years, climate changes will become unpredictable, and these conditions may affect the process of starch biosynthesis and polymer properties. The sweet potato starch market has grown substantially in recent years and understanding the environmental impacts on starch characteristics will contribute to advances for the sector. Herein, the effects of the growing season on the structural, morphological, and physicochemical properties of sweet potato starches were evaluated. Sweet potato trials with two Brazilian cultivars (Canadense and Uruguaiana) were installed in the dry season (planting in March and harvesting in July) and rainy season (planting in October and harvesting in March). Regardless of the cultivar, starches isolated from plants grown in the rainy season have a more ordered structure, with higher gelatinization temperatures, thermal stability, and resistant starch content. Starches from plants grown in the dry season have a higher percentage of small granules with lower crystallinity and lower gelatinization temperatures. These findings can be useful as early knowledge of these changes can help the supply chain to better plan and target suitable markets for naturally modified sweet potato starches.

Nitrogen (N) is the nutrient most taken up by potato and cassava crops and Azospirillum brasilense may contribute to the growth of these crops. Pot experiments evaluated A. brasilense and mineral N application on leaf N concentration, plant growth, and N uptake by potato and cassava grown under natural and disinfected soil. The rates of 2.8 × 108 colony-forming units mL−1 of A. brasilense combined with 0, 75, 150, and 300 mg dm−3 N or 0, 50, 100, and 200 mg dm−3 N were used for potato or cassava grown. At low N supply in natural soil, A. brasilense inoculation increased N concentration in potato leaves by 23–38%, without benefits to plant growth or N uptake. At unfertilized N treatments of both soils, A. brasilense inoculation increased cassava leaf N concentration by 25–33%, but an 11–32% increase in shoot biomass occurred in treatments inoculated and N supplied. Potato crops responded positively to mineral N supply, but cassava responded to fertilization only in disinfected soil. In disinfected soil fertilized with N, A. brasilense inoculation increased cassava N uptake by 27–40%. In contrast, in natural soil, A. brasilense minimized the negative effect of N excess on the tuber development of cassava. These results show that the use of A. brasilense is a more interesting alternative to improve N status and growth in cassava than in potatoes.

Fruit production has increased, which has led to an increase in fruit wastage, opening up new opportunities for the use of non-standard fruits as starch sources. Herein, the physicochemical properties of mango starches isolated from the pulp and kernel of four cultivars were investigated. The pulp starches showed higher purity with total starch ranging from 97.84 to 98.09% (dry basis). The kernel starches had a higher percentage of other components (ash, fiber, lipids, protein, sugars). The main mineral in the starches was potassium (0.37 to 1.32 g/kg). Pulp starches were circular and smaller (15–79 to 16.70 µm) and kernel starches were oval and larger (19.75 to 25.33 µm). Differential scanning calorimetry and rapid viscosity studies showed that the kernel starches had higher gelatinization properties. The mango starches were A-type with varying crystallinity levels (28.37–32.35%). PCA analysis showed the greater impact of gelatinization properties on the grouping of cultivars. These findings would be useful for adding commercial value to mango agricultural and industrial waste and for industries in terms of using the starch as an ingredient in food products and other industrial applications.

Due to the high perishability of figs, calcium stands out as an important nutrient for orchard management. This study aims to study the pre-harvest applications of calcium chloride in fig orchards. The fig trees were sprayed with 0, 0.5, 1.0, 1.5 and 2.0% CaCl2, and fruits were thereafter stored for 0, 7, 14 and 21 d. The variables analysed were the concentration of calcium in leaves and fruits, weight loss, fruit decay, pectinolytic enzyme activity, and physical and chemical attributes of the fruits; CaCl2 sprays enhanced fruit Ca2+ concentration in leaves (14.03%) and fruits (29.3%) and were effective in reducing polygalacturonase and pectin methylesterase activity, weight loss and fruit decay. Pre-treatment with 1% CaCl2 provided fruits with larger diameters, greater firmness, and higher levels of total phenolic compounds in both fruit peel and pulp. The pre-harvest application at 1% CaCl2 showed to be a promising technique in producing high quality fruits and extended storage by approximately 7 to 10 days. These findings may be useful in planning new cultural practices for fig orchards that produce high-quality fruit with desirable characteristics for growers and consumers.

Abstract The objective of this work was to evaluate the banana cultivars for their agronomic yield and starch characteristics. The experiment was carried out in a randomized complete block design, with a factorial arrangement of two cultivars ('BRS Conquista' and 'BRS Platina') and two crop cycles, with three plants per treatment, and five replicates. Fruit yield and starch quality were evaluated. 'BRS Conquista' showed smaller fruit; however, it had a greater marketable bunch weight and yield than 'BRS Platina'. Starches differed for the main physicochemical characteristics, except for X-ray diffraction pattern (B type) and phosphorus content (0.0058–0.0060%). 'BRS Platina' stood out for its higher content of resistant starch (74.55%) that differed from the starch isolated from 'BRS Conquista'. However, the starch of 'BRS Conquista' showed the following characteristics: larger granules (34.74 µm), with greater crystallinity (33.64%); less swelling power and solubility (26.77 g g-1 and 19.21%, respectively); and greater breakdown, setback and final viscosity (67.06, 182.42, and 341.39 RVU, respectively). 'BRS Conquista' shows favorable production characteristics for processing to obtain starch. The higher resistant starch content of 'BRS Platina' may commercially justify its lower agronomic yield. Starches of the two cultivars show desirable characteristics for different industrial applications.

A field experiment was conducted to evaluate the effects of mineral N rates on the yield, morphological traits, quality, and mineral content of the storage roots of sweet potato grown after different green manure sources. Treatments included the application of N at four rates (0, 50, 100, and 200 kg ha−1) to sweet potato grown after the control (indigenous weeds) or the legumes showy crotalaria and velvet bean. PCA revealed that in the treatments with previous showy crotalaria cultivation, there was a low incidence of defects in the storage roots and the storage roots weighed more than they did in the control or in the velvet bean treatments. The current study also showed that legume cultivation only in the previous season was not enough to improve the yield and quality of sweet potato. Therefore, it is necessary to combine previous legume cultivation with the application of 100 or 200 kg N ha−1 in sweet potato to achieve higher levels of yield, quality, and mineral contents, such as Cu, Zn, K, Ca, and Mg, in storage roots. The current research has indicated that future studies should investigate whether the benefits of previous legume cultivation for sweet potato are restricted only to the current growing season.

The growth in demand for gluten-free products linked mainly to health aspects has led to an increased interest in the production of mixed flours for use in bakery products. This work aimed to evaluate the use of different mixtures of cassava starch with banana flour, obtained from the pulp and peel of green fruits, for the production of gluten-free biscuits. In the preparation of the biscuits, seven mixtures were prepared with varying percentages of cassava starch, banana pulp flour and banana peel flour. A formulation with wheat flour was used as a control. Wheat flour, cassava starch and banana flours were analyzed for chemical composition. The results showed that the banana peel flour stood out for its higher levels of proteins, fibres, lipids, ash, total phenols, total flavonoids and antioxidant activity which make this flour effective as a functional additive. However, the results of physical and sensory characteristics of the biscuits showed that the variation in the percentage of banana peel flour led to greater changes in the quality attributes of the biscuits, so the percentage of inclusion should be limited. Banana pulp flour (UBF) had high starch content, however, the biscuits produced with higher percentages of this flour and lower percentages of cassava starch showed lower propagation rates, greater hardness and less sensory acceptance, showing the importance of the starchy raw material in the physical properties of biscuits. Formulations containing cassava starch mixed with up to 15% banana flour (1:1, pulp and peel) are a good basis for making gluten-free biscuits.

As raízes da mandioquinha-salsa possuem elevado valor nutricional, sendo ricas em carboidratos, minerais, vitaminas A e C, e amido de alta digestibilidade. No entanto, nessa cultura um dos fatores decisivos para a produção de raízes com alto valor nutricional é a fertilização equilibrada. Assim, objetivou-se com este estudo avaliar a produtividade e a qualidade nutricional das raízes de reserva da cultura da mandioquinha-salsa, cultivada sob diferentes níveis de adubação NPK. O experimento foi instalado no delineamento de blocos ao acaso, com oito repetições. Os tratamentos foram constituídos por três níveis de adubação NPK (AD0 = cultivo sem adubação; AD1 = cultivo com 50% da adubação NPK recomendada e AD2 = cultivo com 100% da adubação NPK recomendada). Cada parcela experimental foi constituída por cinco fileiras de plantas de seis metros de comprimento. Concluiu-se que maiores níveis de adubação NPK aumentam o número, o tamanho e a produtividade comercial das raízes de reserva da mandioquinha-salsa. A adubação NPK aumenta o tamanho e a qualidade nutricional de K, Mg e Mn das raízes de reserva, sem interferir no pH da polpa e nos teores de proteína, Ca, Cu e Fe. O aumento no tamanho das raízes de reserva em resposta a adubação NPK diminui os seus teores de amido, P e Zn somente se a adubação NPK não aumentar os seus teores de matéria seca.

HIGHLIGHTS Chips from orange-fleshed sweet potato have a good acceptability. Drying process showed retention of carotenoids total content. Chips from drying or frying process showed high resistant starch content.

Os frutos da bananeira ‘FHIA 18’ possuem características sensoriais semelhantes à banana ‘Prata’, porém, não existem informações sobre as reais necessidades em fósforo (P) deste híbrido e seus efeitos na produção e qualidade pós-colheita. O objetivo deste trabalho foi avaliar o perfil físico-químico dos frutos da bananeira ‘FHIA 18’ submetida à níveis de adubação fosfatada, em São Manuel-SP, durante três ciclos sucessivos. Os níveis de adubação com P2O5 aplicados foram: sem adubação com P (0%); 20 kg ha-1 ano-1 (50%); 30 kg ha-1 ano-1 (75%); 40 kg ha-1 ano-1 (100%); 50 kg ha-1 ano-1 (125%); e 60 kg ha-1 ano-1 (150%). Utilizou-se o delineamento inteiramente casualizado, em arranjo de parcelas subdivididas, sendo as parcelas compostas pelos seis níveis de adubação com fósforo e as subparcelas pelos três ciclos de produção (2014, 2015 e 2016). Foram avaliados nos frutos verdes os teores de matéria seca, amido, açúcares totais, açúcares redutores e de fósforo. Nos frutos maduros avaliou-se a firmeza, os descritores de coloração da casca, acidez titulável total, sólidos solúveis totais, índice de maturação, açúcares totais e açúcares redutores. A adubação fosfatada proporcionou aumento nos teores de fósforo nos frutos verdes até a aplicação de 100% da recomendação e aumento dos teores de açúcares redutores até a aplicação de 61% no primeiro ciclo de produção. Quanto aos frutos maduros, a utilização de fósforo em doses inferiores às recomendadas (100%) promoveu menor acidez titulável total e maior índice de maturação (52-53% da recomendação). Por outro lado, independente da dose de P2O5 utilizada, os teores de matéria seca, amido e fósforo, nos frutos verdes, e a firmeza, teores de sólidos solúveis totais, índice de maturação e teores de açúcares nos frutos maduros, aumentam do primeiro ao terceiro ciclo de produção.

Calcium chloride application on fruits maintains the firmness of fruits, decreases storage breakdown and rot, extends shelf-life, and increases vitamin C and calcium content. Blackberries have low post-harvest durability due to the intrinsic characteristics of their fruits, mainly the high respiratory rate and low firmness, which causes problems in the production chain of fresh fruits. The current study aimed to evaluate the effects of pre-harvest application of calcium chloride on the fruits of ‘Tupy’ blackberry (Rubus spp.). A randomized block design for a factorial scheme was used, i.e. calcium chloride concentrations (0, 1.5, 3, and 4.5%) and number of applications (1, 2, and 3). Multiple applications occurred between 5-day intervals. The results showed that the calcium content in the fruits increased with a single application of 2.2%, but a decrease in mass loss was observed with a 4.5% application. The results also indicated great firmness and ascorbic acid content of fruits of ‘Tupy’ blackberry, in addition to the significant increase in fruit size and mass. However, in general, the content of soluble solids, sugars, antioxidant activity and total polyphenols decreased.

ABSTRACT: The current research aimed to evaluate the effects of extrusion parameters on the physical characteristics of extruded blends of cassava leaf flour and starch. A factorial central composite design with four independent variables and the response surface methodology were used to evaluate the results of color parameters (L*, a*, b*), water absorption index, water solubility index and paste properties, according to the variations in the leaf flour percentage (1.5 to 7.5%), extrusion temperature (60 to 100ºC), screw speed (175 to 231rpm) and moisture (20 to 30%). Extrusion conditions affect color, water absorption and water solubility indexes and paste properties of blends. The intermediate tested conditions of variable parameters lead to obtain extruded products with higher cold viscosity and water absorption index and light color, desirable qualities for rapid preparation products.

RESUMO: O nitrogênio (N) é o segundo nutriente mais absorvido pela mandioquinha-salsa. No entanto, ainda existem dúvidas sobre a influência que esse nutriente pode exercer sobre o crescimento da planta e a qualidade das raízes de reserva. Assim, objetivou-se com este trabalho avaliar a influência da adubação nitrogenada no crescimento da planta e na qualidade físico-química e nutricional das raízes de mandioquinha-salsa. O experimento foi conduzido em um Latossolo Vermelho distrófico de textura arenosa, no delineamento experimental de blocos ao acaso, com quatro repetições. Os tratamentos foram constituídos pelas doses de 0, 50, 100 e 200kg ha-1 de N. O crescimento das partes vegetativas da planta de mandioquinha-salsa aumentou linearmente com a adubação nitrogenada, mas a massa média e a produtividade das raízes de reserva aumentaram até as doses estimadas de 121 e 148kg ha-1 de N, respectivamente. A adubação nitrogenada aumentou os teores de amido e de proteína das raízes e diminuiu os teores de açúcares totais, porém, sem influenciar a qualidade nutricional delas.

ABSTRACT: This study aimed to evaluate potato flour from 'Ibituaçú' cultivar as raw material for extrudates. Potato flour was processed in a single-screw extruder following central composite rotational design for three factors, being considered as independent parameters: temperature in the third zone, humidity and screw speed. The products obtained were characterized by expansion index (EI), specific volume (SV), water solubility index (WSI), water absorption index (WAI), hardness (H), color (L*, a* and b*). Results showed an effect of the independent parameters on the extruded physical characteristics. The parameters varied from: 3.22 to 5.47 (EI); 2.08 to 11.23 mL g-1 (SV), 32.88 to 63.72% (WSI), 4.02 to 8.97 g gel g-1 (WAI), 7.54 to 29.85 kgf (H), 53.89 to 68.72 (L*), 5.59 to 6.92 (a*), 16.6 to 22.6 (b*). It was concluded that expanded products with desired physical characteristics are obtained at high temperature; low humidity and intermediate screw speed.

A industrialização da batata tem sido limitada no Brasil, devido à falta de matéria-prima adequada, sendo a demanda suprida pelas importações de produtos processados. Oito cultivares de batata, adaptadas às condições da região serrana de Minas Gerais, safra 2011, foram avaliadas quanto a sua composição centesimal, cor e conteúdo de amilose. Os resultados obtidos mostraram que as cultivares 'Marcy' e 'Colorado' apresentam características importantes para o cozimento. As cultivares 'Marlen' e 'Pirassu' apresentam atributos requeridos para o processamento na forma de chips e/ou palha e a cultivar 'BRS Ana' para a forma de palitos pré-fritos.

Abstract:The objective of this work was to evaluate the effect of nitrogen fertilization on the growth and yield of arracacha (Arracacia xanthorrhiza), as well as on the plant's nutrient uptake, distribution, and removal. The experiment was carried out in a typical Oxisol, with sandy texture. A randomized complete block design was used, with four replicates. The treatments consisted of five N rates: 0, 50, 100, 200, and 400 kg ha-1. The plots were composed of three 8-m-length rows, spaced at 0.60 m between rows and 0.40 m between plants. The plants were harvested after an 8-month cycle. Nitrogen fertilization significantly increased the proportion of N and S accumulated in stems, and of Ca, Mg, Fe, and Mn in leaves. N supply increased Zn distribution to stems and leaves, whereas high N rates increased Cu allocation to stems more than to the rootstock. High N rates increase plant dry matter (DM) production and nutrient uptake and removal, but do not result in the greatest yield due to the greater development of leaves and stems, and to the lower allocation of DM in storage roots.

Vinegar is a food of condiments group that have great use in the food industry. This study aimed to evaluate the effects of parameters of the acetic fermentation process in the production of ginger vinegar. A suspension of ginger rhizomes with 12% of starch was subjected to enzymatic hydrolysis process to obtain hydrolyzed with 85.6% of glucose. After the alcoholic fermentation the wine was obtained with 40.3% ethanol. The acetic fermentation process of ginger alcoholic solution followed a completely randomized design in a factorial for three factors at two levels. The independent variables were: temperature, nutrients and proportion of "strong vinegar" and alcoholic solution (initial acidity). Results showed variation from 2.74 to 3.70% for dry extract and 2.13 to 2.83 % for ash in vinegars. The profile of organic acids of ginger vinegars showed the presence of acetic, citric, malic and succinic acids in all treatments. The condition of 20°C, initial acidity 1:1,with addition of nutrients allow obtaining good quality vinegars and higher GK yields

This work evaluated the quality of the fruit in peach and nectarine cultivars with and without the application of hydrogenated cyanamide and mineral oil, for two production cycles (2009 and 2010). The experiment was carried out at the School of Agricultural Science of the São Paulo State University (UNESP), at Botucatu in the Brazilian state of São Paulo, located at latitude 22º51'55" S and longitude 48º26'22" E, at an altitude of 810 m. The predominant climate type is warm temperate (mesothermal) with rains in the summer and dry in the winter. The following were evaluated: soluble solids, titratable acidity, pH, ratio, firmness, vitamin C and pulp yield. The use of hydrogenated cyanamide and mineral oil had no effect on the quality attributes of the fruit, except for pH, where those fruits under application of the products showed higher values. The cultivars all had a pulp yield greater than 90%, with 'Tourmaline' showing the highest yield (96 %). The levels of vitamin C varied according to the cultivars, where 'Marli' (16.9 mg 100 g-1) and 'Dourado-2' (16.5 mg 100 g-1), stood out for having the highest levels.

O desenvolvimento de tecnologias que permitam o aproveitamento integral dos frutos é de grande importância para as indústrias. Uma possibilidade de valorização da cultura do abacaxi seria o estímulo ao processamento do fruto para a obtenção do suco associado ao aproveitamento das cascas para a elaboração de farinha, produto de mercado crescente. Um dos fatores de grande importância para a aceitação do suco é o sabor, que se encontra diretamente relacionado ao perfil de ácidos e açúcares presentes. Nesta linha, este trabalho visou a processar frutos de abacaxi cv Smooth Cayenne colhidos em dois estádios de maturação para a obtenção e a caracterização do suco e da farinha de cascas. Os sucos obtidos foram analisados em HPLC para o perfil de açúcares e ácidos orgânicos. As farinhas de casca foram analisadas para rendimento, umidade, cinzas, fibras solúvel e insolúvel, lipídeos, proteína e carboidratos totais. Os resultados obtidos mostraram que frutos em estádio mais avançado de maturação produzem sucos com maior teor de açúcares e menor teor de ácidos, sendo o principal ácido o cítrico, e os açúcares frutose, glicose e sacarose. As farinhas de abacaxi apresentam-se como fontes de fibras insolúveis.

Short cooking time and ability to blend varieties of food ingredients have made extrusion cooking a medium for low-cost and nutritionally improved food products. The effect of moisture, extrusion temperature and amount of turmeric flour mixed with cassava flour on physical characteristic of puffed snacks was evaluated in this work. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Results showed effect of extrusion parameters on dependents variables. High expansion, low browning, low water solubility index, intermediate water absorption index and high crispness desirable characteristics to puffed snacks are obtained in conditions of 12% moisture, 5% turmeric flour, 105º C of temperature and 250 rpm of screw speed. These paper point to the potential still unexplored of the use of flours of cassava and turmeric as raw materials in the development of extruded puffed snacks.

The food industry is continually growing with new products becoming available every year. Extrusion combines a number of unit operations in one energy efficient rapid continuous process and can be used to produce a wide variety of snacks foods. The objective of this study was to evaluate the effect of extrusion temperature, screw speed, and amount of cassava leaf flour mixed with cassava starch on the physical properties of extruded snacks processed using a single screw extruder. A central composite rotational design, including three factors with 20 treatments, was used in the experimental design. Dependent variables included the expansion index, specific volume, color, water absorption index, and water solubility index. Among the parameters examined, the amount of cassava leaf flour and extrusion temperature showed significant effects on extruded snack characteristics. Mixtures containing 10% of cassava leaf flour extruded at 100°C and 255 rpm shows favorable levels of expansion, color, water absorption index, and water solubility index.

Este trabalho teve por objetivo avaliar o efeito da temperatura de extrusão e da rotação da rosca sobre as propriedades físicas, reológicas e sensoriais de snacks de mandioca e maracujá produzidos em extrusor mono-rosca. Foi utilizado o delineamento central composto rotacional, com 11 tratamentos, considerando como variáveis dependentes: índice de expansão (IE), volume específico (VE), índice de solubilidade em água (ISA), índice de absorção em água (IAA), cor (L*, a*, b*) e propriedades de pasta (RVA). Os produtos foram aromatizados e analisados para a aceitação global. Os resultados obtidos demonstraram efeitos significativos da temperatura e da rotação sobre as propriedades estudadas e boa aceitação dos produtos sabor chocolate.

Neste trabalho, objetivou-se avaliar o efeito das condições de extrusão sobre as propriedades físicas de produtos extrusados. Foi utilizado o delineamento central composto rotacional com quatro variáveis independentes (2(4)) e a metodologia de superfície de resposta para avaliar os resultados de índice de expansão, volume específico, índice de absorção de água, índice de solubilidade em água e cor, de acordo com as variações de temperatura de extrusão, rotação da rosca, porcentagem de farelo de mandioca e porcentagem de farinha de soja. Os resultados indicam que é possível produzir novos produtos extrusados com boas propriedades físicas a partir de misturas de farinha de soja, fécula e farelo de mandioca.This study aimed to evaluate the effect of the extrusion conditions on physical properties of extruded products. A factorial central composite design (2(4)) with four independent variables and the response surface methodology were used to evaluate the results of expansion index, specific volume, water absorption index, water solubility index and color, according to the variations in barrel temperature, screw speed, percentage of cassava bran and percentage of soya flour. The results indicate that is possible to produce new extruded products with good physical properties from blends of soya flour, cassava starch and bran.

Uma possibilidade de incremento na cadeia produtiva do gengibre seria o uso de rizomas desclassificados para comercialização in natura, ou mesmo o resíduo da extração de óleos, como matérias-primas para a obtenção de bebidas destiladas. O amido não é diretamente fermentável, necessitando de uma hidrólise prévia de suas cadeias para a obtenção de glicose. Neste trabalho, objetivou-se avaliar o efeito das concentrações de amilases sobre o perfil de açúcares e rendimento no processo de hidrólise-sacarificação de gengibre. O processo seguiu o delineamento central composto rotacional para dois fatores, totalizando 11 tratamentos. Os resultados obtidos mostram o efeito das concentrações da α-amilase (Termamyl 2X) e da amiloglucosidase (AMG 300L) sobre o teor de glicose do hidrolisado e efeito da concentração de amiloglucosidase sobre o teor de dextrina. Os maiores rendimentos de hidrólise da suspensão de gengibre foram obtidos nas condições de elevada concentração de -amilase e amiloglucosidase.The use of disqualifies ginger rhizomes as raw material for fresh fruit market is a way to allow the increase of ginger production . The starch is not directly fermentable, which requires prior hydrolysis to obtain glucose. This study aimed to evaluate the effect of concentrations of α-amylase and amyloglucosidase on the yield and sugar profile in the process of hydrolysis-saccharification of ginger. The process followed the central composite design for two factors, totaling 11 treatments. The results showed the effect of concentrations of α-amylase (Termamyl 2X) and amyloglucosidase (AMG 300L) on the glucose content and amyloglucosidase concentration effect on the content of dextrin. The higher yields of hydrolysis of the ginger suspension were obtained under conditions of high concentration of -amylase and amyloglucosidase.

A manipueira, resíduo líquido resultante do processamento da fécula e da farinha de mandioca, apresenta potencial poluidor reconhecidamente elevado. Visando uma possível utilização da manipueira como matéria-prima para obtenção de etanol, neste trabalho objetivou-se avaliar o efeito da porcentagem de levedura inoculada e da temperatura sobre os componentes do vinho. A manipueira caracterizada para o teor de amido, açúcares solúveis, pH e acidez titulável foi hidrolisada pela ação de enzimas Termamyl 120 L e AMG 300 L, sendo o hidrolisado obtido fermentado em diferentes condições. Foi utilizado o delineamento fatorial do tipo central composto rotacional com duas variáveis independentes (22) e a metodologia de superfície de resposta para avaliar os resultados. Os produtos de cada etapa foram caracterizados em cromatografia líquida. Os resultados obtidos mostraram efeito significativo dos parâmetros variáveis sobre os componentes do vinho. As condições de baixa temperatura de fermentação e menores porcentagens de levedura inoculada foram as mais adequadas para a obtenção de etanol de manipueira.“Manipueira”, a liquid residue from the processing of cassava starch and flour, has recognized high pollution potential. Aiming at a possible use of “manipueira” as raw material for ethanol production, this study aimed to evaluate the effect of the percentage of inoculated yeast and fermentation temperature on the chromatographic profile of the components of wine of “manipueira”. The residue was characterized for starch and sugar content, as well as pH and total acidity. The residue was hydrolyzed by the action of enzymes Termamyl 120 L and AMG 300 L. The hydrolysate obtained was fermented under different experimental conditions. A factorial central composite design (22) with two independent variables and the response surface methodology were used to evaluate the results. The results showed a significant effect of variable parameters on the components of wine. The conditions of low fermentation temperature and lower percentages of inoculated yeast were the most appropriate to obtain ethanol from “manipueira”.

A banana, uma das principais herbáceas cultivadas em grande quantidade no mundo e importante fonte de energia para as pessoas, tem obtido interesse como matéria-prima para a produção de farinha e fécula para uso alimentício e outros fins industriais, devido ao elevado conteúdo de amido nos frutos verdes. O trabalho teve como objetivo caracterizar os frutos verdes de sete genótipos de bananeira quanto à composição química e avaliar o conteúdo de amilose, propriedades de pasta e térmicas dos amidos destes genótipos. Os resultados obtidos mostraram diferenças significativas na composição química dos frutos, com maior teor de amido na cultivar Figo Cinza. As análises dos amidos mostraram valores de amilose de 26,68 a 33,95% e propriedades de pasta com elevado pico de viscosidade, baixa resistência à temperatura e agitação (quebra de viscosidade) e tendência à retrogradação para todos os amidos. Nas propriedades térmicas, os amidos mostraram um endoderma, temperatura de gelatinização na faixa de 60 a 73ºC com DH variando de 11,6 a 16,99 J g-1 na gelatinização e 4,11 a 7,97 J g-1 na retrogradação.

A manipueira, resíduo líquido resultante do processamento da fécula e da farinha de mandioca, apresenta potencial poluidor reconhecidamente elevado. Visando uma possível utilização da manipueira como matéria-prima para obtenção de etanol, neste trabalho objetivou-se avaliar o efeito da porcentagem de levedura inoculada e da temperatura sobre os componentes do vinho. A manipueira caracterizada para o teor de amido, açúcares solúveis, pH e acidez titulável foi hidrolisada pela ação de enzimas Termamyl 120 L e AMG 300 L, sendo o hidrolisado obtido fermentado em diferentes condições. Foi utilizado o delineamento fatorial do tipo central composto rotacional com duas variáveis independentes (22) e a metodologia de superfície de resposta para avaliar os resultados. Os produtos de cada etapa foram caracterizados em cromatografia líquida. Os resultados obtidos mostraram efeito significativo dos parâmetros variáveis sobre os componentes do vinho. As condições de baixa temperatura de fermentação e menores porcentagens de levedura inoculada foram as mais adequadas para a obtenção de etanol de manipueira.

Instant mixtures are easy to prepare and frequently present functional appeals. A quality parameter for instant mixtures is their rheological behavior. This study aimed at evaluating the effects of extrusion parameters on the pasting properties of cassava (Manihot esculenta L.) starch and dehydrated orange (Citrus sinensis (L.) Osbeck) pulp mixtures. The variable parameters were moisture of mixtures (12.5 to 19%), barrel temperature (40 to 90ºC) and screw rotation (170 to 266 rpm). The extruded mixtures did not show gelatinization enthalpy. Moisture had the greatest effect on paste properties. The initial pasting viscosity (before heating) of RVA (Rapid visco analyzer) is the most relevant parameter to instant mixtures. The highest cold viscosity values were obtained when mixtures were extruded under high moisture and high screw speed. High moisture (19.5%), intermediate temperature (65ºC) and screw speed (218 rpm) led to extruded mixtures production with low component degradation.Misturas instantâneas apresentam-se como produtos de fácil preparo e muitas vezes com apelos funcionais. Um parâmetro de qualidade nestas misturas é o comportamento reológico. Avaliou-se o efeito de parâmetros de extrusão sobre as propriedades de pasta de misturas de fécula de mandioca (Manihot esculenta L.) e polpa de laranja (Citrus sinensis (L.) Osbeck) desidratada. A umidade das misturas (12.5 a 19%), a temperatura de extrusão (40 a 90ºC) e a rotação da rosca (170 a 266 rpm) foram considerados parâmetros variáveis. As misturas extrusadas não apresentaram entalpia de gelatinização. A umidade foi o fator de maior efeito sobre as propriedades de pasta. A viscosidade inicial (antes do aquecimento) no RVA (Rapid visco analyzer) é um dos parâmetros mais importantes para misturas instantâneas. Nas condições de elevada umidade e rotação da rosca são observadas as maiores viscosidades a frio. Condições de elevada umidade das misturas (19,5%), temperatura (65ºC) e rotação intermediárias (218 rpm) levaram a obtenção de misturas extrusadas com baixa degradação dos componentes.

Este trabalho teve por objetivo avaliar o efeito da temperatura de extrusão e da porcentagem de farinha de soja sobre a expansão (IE), o índice de absorção de água (IAA), o índice de solubilidade em água (ISA), a cor (L*, a* e b*) e a dureza de biscoitos extrusados. O processo de extrusão seguiu o delineamento central composto rotacional para dois fatores, totalizando 11 tratamentos. Os resultados obtidos mostraram que a temperatura e a porcentagem de farinha de soja tiveram efeitos significativos sobre as propriedades físicas dos produtos. Nas condições intermediárias de temperatura e baixa porcentagem de farinha de soja (10%), é possível obter biscoitos funcionais de mandioca com elevada expansão, índices intermediários de absorção e solubilidade em água, cor clara e baixa dureza.This study aimed to evaluate the effect of the extrusion temperature and the percentage of soybean flour in mixes on the expansion index (EI), water absorption index (WAI), water solubility index(WSI); color (L *, a *, b *) and hardness of extruded sour cassava snacks. The extrusion process followed the rotational central composite design for two factors, totalizing 11 treatments. The results showed that the extrusion temperature and percentage of soybean flour in mixes had significant effects on the physical properties of products. Under the conditions of intermediate temperature and low percentage of soybean meal is possible to obtain function cassava snacks with high expansion, intermediate index of absorption and solubility in water, light color and low hardness.

Este trabalho teve por objetivo avaliar o efeito da umidade, temperatura de extrusão e rotação da rosca na produção de produtos extrusados expandidos com a utilização do polvilho doce e da polpa de laranja desidratada como matéria-prima. O processo seguiu delineamento central composto rotacional com três fatores, totalizando 15 tratamentos (oito pontos fatoriais, seis pontos axiais e um ponto central com seis repetições). Os produtos obtidos foram caracterizados quanto ao índice de expansão (IE), ao volume específico (VE), ao índice de solubilidade em água (ISA) e à cor (L*, a* e b*). Os resultados mostraram efeito das condições operacionais do processo sobre as características físicas dos produtos, e produtos claros com maior expansão e menor solubilidade em água foram obtidos nas condições mais elevadas de temperatura (80-90°C), condições intermediárias de umidade (16%) e rotação da rosca (218rpm).This research aimed to evaluate the effect of moisture, extrusion temperature and screw speed in the production of flax snacks using as raw material cassava starch and dehydrated orange pulp. The process followed the central composite rotational design to three factors, totaling 15 treatments (8 factorial points, 6 star points and 1 center point with 6 repetitions). The products obtained were characterized for expansion rate, specific volume, water solubility index and color (L*, a* and b*). The results showed the effect of operational conditions on the physical characteristics of products, and clear products with larger expansion and lower water solubility index were obtained in conditions of the highest temperature (80-90°C) and moisture (16%) and intermediate screw speed (218rpm).

This study aimed to evaluate the effects of operational conditions of the extrusion process (temperature, moisture and protein content) in production of cassava snacks added of casein, aiming to provide information to the cassava processing industry. The cassava flour and casein were characterized as their chemical components and color. The experimental design followed the central composite rotational design with three factors. The obtained products were characterized as for rate of expansion, specific volume, color and hardness. Data analyses showed that the lower moisture, protein and temperature conditions provided desired expanded products with light color attributes, high expansion and low hardness.<>Este trabalho teve por objetivo a avaliação dos efeitos das condições operacionais do processo de extrusão (temperatura de extrusão, umidade e teor de proteína) na obtenção de produtos expandidos de mandioca, enriquecidos com caseína, visando fornecer informações ao setor de processamento de mandioca. A farinha de mandioca e a caseína foram caracterizadas quanto aos seus componentes químicos e cor. O experimento seguiu o delineamento experimental “central composto rotacional” para três fatores. Os produtos obtidos foram caracterizados quanto ao índice de expansão, volume específico, cor e dureza. A análise dos dados mostrou que as condições de menor umidade, teor de proteína e temperatura proporcionaram a obtenção de produtos expandidos com atributos desejados, ou seja, cor clara, alta expansão e baixa dureza.

Considering the importance of cassava starch for Brazilian industries, the current work aimed at evaluating the effects of extrusion parameters on the physical characteristics, mainly viscosity properties of extruded cassava starch. A factorial central composite design (2³) with three independent variables and the response surface methodology were used to evaluate the results of expansion index, specific volume, water absorption index, water solubility index, color and paste properties, according to the variations in the moisture content, barrel temperature and screw speed. Results indicated that barrel temperature influenced the expansion index, specific volume, water absorption index, all the color parameters, the initial viscosity, peak and final viscosity. Feed moisture influenced the specific volume, color parameters, final viscosity and retrogradation. The screw speed had effects on water absorption index, color components as well as on the final viscosity and retrogradation of extruded starch. High moisture, low screw speed and intermediate temperature provided lower starch degradation, which is desirable for pre-cooked starch.Considerando a importância do amido de mandioca para as indústrias brasileiras, este trabalho teve por objetivo avaliar os efeitos de parâmetros de extrusão sobre as características físicas e propriedades de pasta do amido de mandioca extrusado. Foi utilizado o delineamento fatorial do tipo central composto rotacional com três variáveis independentes (2³) e a metodologia de superfície de resposta para avaliar os resultados de índice de expansão, volume específico, índice de absorção de água, índice de solubilidade em água, cor e propriedades de pasta, de acordo com as variações de umidade, temperatura de extrusão e rotação da rosca. A temperatura de extrusão influenciou o índice de expansão, volume específico, índice de absorção de água, todos os parâmetros de cor e a viscosidade inicial, pico e viscosidade final. Já a umidade teve influência sobre o volume específico, parâmetros de cor, viscosidade final e tendência a retrogradação. A rotação da rosca teve efeito no índice de absorção de água, nos componentes de cor bem como viscosidade final e na tendência à retrogradação do amido extrusado. Nas condições operacionais de elevada umidade inicial da matéria-prima, baixa rotação da rosca e temperatura de extrusão no nível intermediário ocorreu menor degradação do amido, o que é desejável em amidos pré-gelatinizados.

Com o avanço de tecnologias, existe a possibilidade da introdução, no mercado, de farinhas de mandioca diferenciadas, como as farinhas instantâneas, sendo esta uma alternativa de grande interesse para as indústrias processadoras de mandioca. Este trabalho teve por objetivo avaliar o efeito da temperatura de extrusão, umidade da farinha e rotação da rosca sobre as propriedades térmicas e de pasta de farinhas de mandioca extrusadas. Os resultados obtidos mostraram efeitos significativos da rotação da rosca sobre a viscosidade inicial, pico e quebra de viscosidade. O pico de viscosidade foi influenciado pelos três parâmetros de processo, não sendo observados efeitos significativos dos parâmetros sobre a viscosidade final e tendência a retrogradação. As propriedades térmicas das farinhas extrusadas não apresentaram entalpia de gelatinização residual.