Search

Compression of hyperspectral images onboard of spacecrafts is a tradeoff between the limited computational resources and the ever-growing spatial and spectral resolution of the optical instruments. As such, it requires low-complexity algorithms with good rate-distortion performance and high throughput. In recent years, the Consultative Committee for Space Data Systems (CCSDS) has focused on lossless and near-lossless compression approaches based on predictive coding, resulting in the recently published CCSDS 123.0-B-2 recommended standard. While the in-loop reconstruction of quantized prediction residuals provides excellent rate-distortion performance for the near-lossless operating mode, it significantly constrains the achievable throughput due to data dependencies. In this paper, we study the performance of a faster method based on the prequantization of the image followed by a lossless predictive compressor. While this is well known to be suboptimal, one can exploit powerful signal models to reconstruct the image at the ground segment, recovering part of the suboptimality. In particular, we show that convolutional neural networks can be used for this task and that they can recover the whole SNR drop incurred at a bit rate of 2 bits per pixel. [ABSTRACT FROM AUTHOR]

Compressed Sensing (CS) is an established way to perform efficient dimensionality reduction during a signal’s acquisition process. However, the common transform bases used in CS to represent a signal often lead to a compressible representation that is not optimal in terms of compactness. In this paper we present a novel dictionary learning algorithm designed to work with CS data. Following our approach, dictionaries learned directly from the signal’s random projections are specifically suited to the signal class of interest, resulting in very sparse representations. Moreover, since the proposed method lays its foundation in a Bayesian dictionary learning algorithm, no prior information such as the signals’ sparsity is needed because it is inferred directly from the data. We show the superiority of our approach by comparing it with a state-of-the-art CS dictionary learning algorithm. [ABSTRACT FROM AUTHOR]

Compressed sensing (CS) is a fast and efficient way to obtain compact signal representations. Oftentimes, one wishes to extract some information from the available compressed signal. Since CS signal recovery is typically expensive from a computational point of view, it is inconvenient to first recover the signal and then extract the information. A much more effective approach consists in estimating the information directly from the signal’s linear measurements. In this paper, we propose a novel framework for compressive estimation of autoregressive (AR) process parameters based on $ad~hoc$ sensing matrix construction. More in detail, we introduce a compressive least square estimator for AR(p) parameters and a specific AR(1) compressive Bayesian estimator. We exploit the proposed techniques to address two important practical problems. The first is compressive covariance estimation for Toeplitz structured covariance matrices where we tackle the problem with a novel parametric approach based on the estimated AR parameters. The second is a block-based compressive imaging system, where we introduce an algorithm that adaptively calculates the number of measurements to be acquired for each block from a set of initial measurements based on its degree of compressibility. We show that the proposed techniques outperform the state-of-the-art methods for these two problems. [ABSTRACT FROM PUBLISHER]

Predictive coding is attractive for compression on board of spacecraft due to its low computational complexity, modest memory requirements, and the ability to accurately control quality on a pixel-by-pixel basis. Traditionally, predictive compression focused on the lossless and near-lossless modes of operation, where the maximum error can be bounded but the rate of the compressed image is variable. Rate control is considered a challenging problem for predictive encoders due to the dependencies between quantization and prediction in the feedback loop and the lack of a signal representation that packs the signal's energy into few coefficients. In this paper, we show that it is possible to design a rate control scheme intended for onboard implementation. In particular, we propose a general framework to select quantizers in each spatial and spectral region of an image to achieve the desired target rate while minimizing distortion. The rate control algorithm allows achieving lossy near-lossless compression and any in-between type of compression, e.g., lossy compression with a near-lossless constraint. While this framework is independent of the specific predictor used, in order to show its performance, in this paper, we tailor it to the predictor adopted by the CCSDS-123 lossless compression standard, obtaining an extension that allows performing lossless, near-lossless, and lossy compression in a single package. We show that the rate controller has excellent performance in terms of accuracy in the output rate, rate-distortion characteristics, and is extremely competitive with respect to state-of-the-art transform coding. [ABSTRACT FROM PUBLISHER]

Abstract: Transparent encryption of video content requires to provide a video preview that is left in plaintext, while the enhancement information is encrypted. In this paper we propose three algorithms that provide transparent encryption. The first two ones are based on the idea of generating controlled drift in such a way as to obtain the desired quality level, while the third algorithm employs scalable video coding. We provide experimental results on several video sequences, as well as a security analysis, showing that the proposed algorithms provide an effective framework to perform transparent encryption. [Copyright &y& Elsevier]

Distributed source coding schemes are typically based on the use of channels codes as source codes. In this paper we propose a new paradigm, named "distributed arithmetic coding," which extends arithmetic codes to the distributed case employing sequential decoding aided by the side information. In particular, we introduce a distributed binary arithmetic coder for the Slepian-Wolf coding problem, along with a joint decoder. The proposed scheme can be applied to two sources in both the asymmetric mode, wherein one source acts as side information, and the symmetric mode, wherein both sources are coded with ambiguity, at any combination of achievable rates. Distributed arithmetic coding provides several advantages over existing Slepian-Wolf coders, especially good performance at small block lengths, and the ability to incorporate arbitrary source models in the encoding process, e.g., context-based statistical models, in much the same way as a classical arithmetic coder. We have compared the performance of distributed arithmetic coding with turbo codes and low-density parity-check codes, and found that the proposed approach is very competitive. [ABSTRACT FROM AUTHOR]

Hyperspectral images exhibit significant spectral correlation, whose exploitation is crucial for compression. In this paper, we investigate the problem of predicting a given band of a hyperspectral image using more than one previous band. We present an information-theoretic analysis based on the concept of conditional entropy, which is used to assess the available amount of correlation and the potential compression gain. Then, we propose a new lossless compression algorithm that employs a Kalman filter in the prediction stage. Simulation results are presented on Airborne Visible Infrared Imaging Spectrometer, Hyperspectral Digital Imagery Collection Experiment, and Hyperspectral Mapper scenes, showing competitive performance with other state-of-the-art compression algorithms. [ABSTRACT FROM AUTHOR]

JPEG 2000 is the novel ISO standard for image and video coding. Besides its improved coding efficiency, it also provides a few error resilience tools in order to limit the effect of errors in the codestream, which can occur when the compressed image or video data are transmitted over an error-prone channel, as typically occurs in wireless communication scenarios. However, for very harsh channels, these tools often do not provide an adequate degree of error protection. In this paper, we propose a novel error-resilience tool for JPEG 2000, based on the concept of ternary arithmetic coders employing a forbidden symbol. Such coders introduce a controlled degree of redundancy during the encoding process, which can be exploited at the decoder side in order to detect and correct errors. We propose a maximum likelihood and a maximum a posteriori context-based decoder, specifically tailored to the JPEG 2000 arithmetic coder, which are able to carry out both hard and soft decoding of a corrupted codestream. The proposed decoder extends the JPEG 2000 capabilities in error-prone scenarios, without violating the standard syntax. Extensive simulations on video sequences show that the proposed decoders largely outperform the standard in terms of PSNR and visual quality. [ABSTRACT FROM AUTHOR]

In this paper, we propose an efficient method for the allocation of Reed-Solomon codes to source symbols, for unequal loss protection. The proposed formulation recasts the multivariate optimization problem into a univariate one, dramatically reducing the computational complexity. Results are shown for image transmission over lossy packet networks, employing the JPEG2000 and SPIHT encoders. The proposed algorithm exhibits performance equivalent to previous methods, while providing a significant complexity reduction. [ABSTRACT FROM AUTHOR]

We present hybrid loss protection as a new channel coding and packetization scheme for image transmission over nonprioritized lossy packet networks. The scheme employs an interleaver-based structure, and attempts to maximize the expected peak signal-to-noise ratio (PSNR) at the receiver given the constraint that the probability of failure, i.e., the probability that the PSNR of the decoded image is below a given threshold, is upper-bounded by a user-defined value. A new code-allocation algorithm is proposed, which employs Gilbert-Elliot modeling of the network statistics. Experimental results are provided in the case of transmission of images encoded by SPIHT and JPEG 2000 over a wireline, as well as a wireless UMTS-based Internet connection. [ABSTRACT FROM AUTHOR]

In this paper we address the problem of JPEG 2000 imaging in a wireless environment. We first define a flexible and efficient data structure for the description of the error sensitivity of different parts of a JPEG 2000 codestream or file format; the data structure is designed in such a way that it can be seamlessly integrated as payload of a JPEG 2000 marker segment or file format box. Moreover, we investigate ARQ policies for robust packet-based JPEG 2000 image transmission over 3G mobile communication systems, and highlight how the proposed data structure can be exploited to improve the end-to-end performance. [ABSTRACT FROM AUTHOR]

In this paper, we propose to employ predictive coding for lossy compression of synthetic aperture radar (SAR) raw data. We exploit the known result that a blockwise normalized SAR raw signal is a Gaussian stationary process in order to design an optimal decorrelator for this signal. We show that, due to the statistical properties of the SAR signal, an along-range linear predictor with few taps is able to effectively capture most of the raw signal correlation. The proposed predictive coding algorithm, which performs quantization of the prediction error, optionally followed by entropy coding, exhibits a number of advantages, and notably an interesting performance/complexity trade-off, with respect to other techniques such as flexible block adaptive quantization (FBAQ) or methods based on transform-coding; fractional output bit-rates can also be achieved in the entropy-constrained mode. Simulation results on real-world SIR-C/X-SAR as well as simulated raw and image data show that the proposed algorithm outperforms FBAQ as to SNR, at a computational cost compatible with modern SAR systems. [ABSTRACT FROM AUTHOR]

Deals with the design and implementation of an image transform coding algorithm based on the integer wavelet transform (IWT). Difficulty of compressing still images; Discussion of the lifting scheme and the factorization of the polyphase matrix; Effect of finite computer precision; Architecture for the IWT implementation by means of the lossy performance.

Presents a study which proposed on-board selection scheme for aerial and space images based on linear feature detection in a feature hyperspace. Research methodology; Results and discussion; Conclusions.

• In a denoising problem, the correct location of a point also depends on the color attribute and not only the geometry of the neighboring points, and the correct color also depends on the geometry of the neighbors. • Graph-based convex optimization enforces smoothness on the graph signal to perform the denoising task. • Several different tasks, i.e., denoising of color-only noise, geometry-only noise, and both of them jointly, an be addressed employing the same algorithm by simply adapting the parameters to each denoising scenario. • Tikhonov regularization performs better than Total variation in all the denoising scenarios. • The algorithm is robust to different noise distributions and intensities. A point cloud is a representation of a 3D scene as a discrete collection of geometry plus other attributes such as color, normal, transparency associated with each point. The traditional acquisition process of a 3D point cloud, e.g. using depth information acquired directly by active sensors or indirectly from multi-viewpoint images, suffers from a significant amount of noise. Hence, the problem of point cloud denoising has recently received a lot of attention. However, most existing techniques attempt to denoise only the geometry of each point, based on the geometry information of the neighboring points; there are very few works at all considering the problem of denoising the color attributes of a point cloud. In this paper, we move beyond the state of the art and we propose a novel technique employing graph-based optimization, taking advantage of the correlation between geometry and color, and using it as a powerful tool for several different tasks, i.e. color denoising, geometry denoising, and combined geometry and color denoising. The proposed method is based on the notion that the correct location of a point also depends on the color attribute and not only the geometry of the neighboring points, and the correct color also depends on the geometry of the neighbors. The proposed method constructs a suitable k -NN graph from geometry and color and applies graph-based convex optimization to obtain the denoised point cloud. Extensive simulation results on both real-world and synthetic point clouds show that the proposed denoising technique outperforms state-of-the-art methods using both subjective and objective quality metrics. [ABSTRACT FROM AUTHOR]

A preface to the "International Journal of Remote Sensing" is presented.

A cloud screening unit on a satellite platform for Earth observation can play an important role in optimizing communication resources by selecting images with interesting content while skipping those that are highly contaminated by clouds. In this study, we address the cloud screening problem by investigating an encoder–decoder convolutional neural network (CNN). CNNs usually employ millions of parameters to provide high accuracy; on the other hand, the satellite platform imposes hardware constraints on the processing unit. Hence, to allow an onboard implementation, we investigate experimentally several solutions to reduce the resource consumption by CNN while preserving its classification accuracy. We experimentally explore approaches such as halving the computation precision, using fewer spectral bands, reducing the input size, decreasing the number of network filters and also making use of shallower networks, with the constraint that the resulting CNN must have sufficiently small memory footprint to fit the memory of a low-power accelerator for embedded systems. The trade-off between the network performance and resource consumption has been studied over the publicly available SPARCS dataset. Finally, we show that the proposed network can be implemented on the satellite board while performing with reasonably high accuracy compared with the state-of-the-art. [ABSTRACT FROM AUTHOR]

Non-local self-similarity is well-known to be an effective prior for the image denoising problem. However, little work has been done to incorporate it in convolutional neural networks, which surpass non-local model-based methods despite only exploiting local information. In this paper, we propose a novel end-to-end trainable neural network architecture employing layers based on graph convolution operations, thereby creating neurons with non-local receptive fields. The graph convolution operation generalizes the classic convolution to arbitrary graphs. In this work, the graph is dynamically computed from similarities among the hidden features of the network, so that the powerful representation learning capabilities of the network are exploited to uncover self-similar patterns. We introduce a lightweight Edge-Conditioned Convolution which addresses vanishing gradient and over-parameterization issues of this particular graph convolution. Extensive experiments show state-of-the-art performance with improved qualitative and quantitative results on both synthetic Gaussian noise and real noise. [ABSTRACT FROM AUTHOR]

Compressive sensing (CS) has been proposed as a disruptive approach to developing a novel class of optical instrumentation used in diverse application domains. Thanks to sparsity as an inherent feature of many natural signals, CS allows for the acquisition of the signal in a very compact way, merging acquisition and compression in a single step and, furthermore, offering the capability of using a limited number of detector elements to obtain a reconstructed image with a larger number of pixels. Although the CS paradigm has already been applied in several application domains, from medical diagnostics to microscopy, studies related to space applications are very limited. In this paper, we present and discuss the instrumental concept, optical design, and performances of a CS imaging spectrometer for ultraviolet-visible (UV–Vis) stellar spectroscopy. The instrument—which is pixel-limited in the entire 300 nm–650 nm spectral range—features spectral sampling that ranges from 2.2 nm@300 nm to 22 nm@650 nm, with a total of 50 samples for each spectrum. For data reconstruction quality, the results showed good performance, measured by several quality metrics chosen from those recommended by CCSDS. The designed instrument can achieve compression ratios of 20 or higher without a significant loss of information. A pros and cons analysis of the CS approach is finally carried out, highlighting main differences with respect to a traditional system. [ABSTRACT FROM AUTHOR]

In this paper, we introduce new gradient-based methods for image recovery from a small collection of spectral coefficients of the Fourier transform, which is of particular interest for several scanning technologies, such as magnetic resonance imaging. Since gradients of a medical image are much more sparse or compressible than the corresponding image, classical \ell 1 -minimization methods have been used to recover these relative differences. The image values can then be obtained by integration algorithms imposing boundary constraints. Compared with classical gradient recovery methods, we propose two new techniques that improve reconstruction. First, we cast the gradient recovery problem as a compressed sensing problem taking into account that the curl of the gradient field should be zero. Second, inspired by the emerging field of signal processing on graphs, we formulate the gradient recovery problem as an inverse problem on graphs. Iteratively reweighted \ell 1 recovery methods are proposed to recover these relative differences and the structure of the similarity graph. Once the gradient field is estimated, the image is recovered from the compressed Fourier measurements using least squares estimation. Numerical experiments show that the proposed approach outperforms the state-of-the-art image recovery methods. [ABSTRACT FROM AUTHOR]

Predictive lossy compression has been shown to represent a very flexible framework for lossless and lossy onboard compression of multispectral and hyperspectral images with quality and rate control. In this paper, we improve predictive lossy compression in several ways, using a standard issued by the Consultative Committee on Space Data Systems, namely CCSDS-123, as an example of application. First, exploiting the flexibility in the error control process, we propose a constant-signal-to-noise-ratio algorithm that bounds the maximum relative error between each pixel of the reconstructed image and the corresponding pixel of the original image. This is very useful to avoid low-energy areas of the image being affected by large errors. Second, we propose a new rate control algorithm that has very low complexity and provides performance equal to or better than existing work. Third, we investigate several entropy coding schemes that can speed up the hardware implementation of the algorithm and, at the same time, improve coding efficiency. These advances make predictive lossy compression an extremely appealing framework for onboard systems due to its simplicity, flexibility, and coding efficiency. [ABSTRACT FROM PUBLISHER]

Distributed optimization in multi-agent systems under sparsity constraints has recently received a lot of attention. In this paper, we consider the in-network minimization of a continuously differentiable nonlinear function which is a combination of local agent objective functions subject to sparsity constraints on the variables. A crucial issue of in-network optimization is the handling of the communications, which may be expensive. This calls for efficient algorithms, that are able to reduce the number of required communication links and transmitted messages. To this end, we focus on asynchronous and randomized distributed techniques. Based on consensus techniques and iterative hard thresholding methods, we propose three methods that attempt to minimize the given function, promoting sparsity of the solution: asynchronous hard thresholding (AHT), broadcast hard thresholding (BHT), and gossip hard thresholding (GHT). Although similar in many aspects, it is difficult to obtain a unified analysis for the proposed algorithms. Specifically, we theoretically prove the convergence and characterize the limit points of AHT in regular networks under some proper assumptions on the functions to be minimized. For BHT and GHT, instead, we characterize the fixed points of the maps that rule their dynamics in terms of stationary points of original problem. Finally, we illustrate the implementation of our techniques in compressed sensing and present several numerical results on performance and number of transmissions required for convergence. [ABSTRACT FROM PUBLISHER]

Compressed sensing (CS) is an emerging paradigm for acquisition of compressed representations of a sparse signal. Its low complexity is appealing for resource-constrained scenarios like sensor networks. However, such scenarios are often coupled with unreliable communication channels and providing robust transmission of the acquired data to a receiver is an issue. Multiple description coding (MDC) effectively combats channel losses for systems without feedback, thus raising the interest in developing MDC methods explicitly designed for the CS framework, and exploiting its properties. We propose a method called Graded Quantization (CS-GQ) that leverages the democratic property of compressive measurements to effectively implement MDC, and we provide methods to optimize its performance. A novel decoding algorithm based on the alternating directions method of multipliers is derived to reconstruct signals from a limited number of received descriptions. Simulations are performed to assess the performance of CS-GQ against other methods in presence of packet losses. The proposed method is successful at providing robust coding of CS measurements and outperforms other schemes for the considered test metrics. [ABSTRACT FROM PUBLISHER]

The \ell 0/\ell 1 -regularized least-squares approach is used to deal with linear inverse problems under sparsity constraints, which arise in mathematical and engineering fields. In particular, multiagent models have recently emerged in this context to describe diverse kinds of networked systems, ranging from medical databases to wireless sensor networks. In this paper, we study methods for solving \ell 0/\ell 1 -regularized least-squares problems in such multiagent systems. We propose a novel class of distributed protocols based on iterative thresholding and input driven consensus techniques, which are well-suited to work in-network when the communication to a central processing unit is not allowed. Estimation is performed by the agents themselves, which typically consist of devices with limited computational capabilities. This motivates us to develop low-complexity and low-memory algorithms that are feasible in real applications. Our main result is a rigorous proof of the convergence of these methods in regular networks. We introduce a suitable distributed, regularized, least-squares functional, and we prove that our algorithms reach their minima using results from dynamical systems theory. Furthermore, we propose numerical comparisons with the alternating direction method of multipliers and the distributed subgradient methods, in terms of performance, complexity, and memory usage. We conclude that our techniques are preferable for their good memory-accuracy tradeoff. [ABSTRACT FROM AUTHOR]

We consider correlated and distributed sources without cooperation at the encoder. For these sources, we derive the best achievable performance in the rate-distortion sense of any distributed compressed sensing scheme, under the constraint of high-rate quantization. Moreover, under this model we derive a closed-form expression of the rate gain achieved by taking into account the correlation of the sources at the receiver and a closed-form expression of the average performance of the oracle receiver for independent and joint reconstruction. Finally, we show experimentally that the exploitation of the correlation between the sources performs close to optimal and that the only penalty is due to the missing knowledge of the sparsity support as in (non distributed) compressed sensing. Even if the derivation is performed in the large system regime, where signal and system parameters tend to infinity, numerical results show that the equations match simulations for parameter values of practical interest. [ABSTRACT FROM AUTHOR]

Information extraction from synthetic aperture radar (SAR) images is heavily impaired by speckle noise, and hence, despeckling is a crucial preliminary step in scene analysis algorithms. The recent success of deep learning envisions a new generation of despeckling techniques that could outperform classical model-based methods. However, current deep learning approaches to despeckling require supervision for training, whereas clean SAR images are impossible to obtain. In the literature, this issue is tackled by resorting to either synthetically speckled optical images, which exhibit different properties with respect to true SAR images, or multitemporal SAR images, which are difficult to acquire or fuse accurately. In this article, inspired by recent works on blind-spot denoising networks, we propose a self-supervised Bayesian despeckling method. The proposed method is trained by employing only noisy SAR images and can, therefore, learn features of real SAR images rather than synthetic data. Experiments show that the performance of the proposed approach is very close to the supervised training approach on synthetic data and superior on real data in both quantitative and visual assessments. [ABSTRACT FROM AUTHOR]

In this paper, we propose a lossless compression algorithm for hyperspectral images inspired by the distributed-source-coding (DSC) principle. DSC refers to separate compression and joint decoding of correlated sources, which are taken as adjacent bands of a hyperspectral image. This concept is used to design a compression scheme that provides error resilience, very low complexity, and good compression performance. These features are obtained employing scalar coset codes to encode the current band at a rate that depends on its correlation with the previous band, without encoding the prediction error. Iterative decoding employs the decoded version of the previous band as side information and uses a cyclic redundancy code to verify correct reconstruction. We develop three algorithms based on this paradigm, which provide different tradeoffs between compression performance, error resilience, and complexity. Their performance is evaluated on raw and calibrated AVIRIS images and compared with several existing algorithms. Preliminary results of a field-programmable gate array implementation are also provided, which show that the proposed algorithms can sustain an extremely high throughput. [ABSTRACT FROM AUTHOR]

Transform-based lossy compression has a huge potential for hyperspectral data reduction. Hyperspectral data are 3-D, and the nature of their correlation is different in each dimension. This calls for a careful design of the 3-D transform to be used for compression. In this paper, we investigate the transform design and rate allocation stage for lossy compression of hyperspectral data. First, we select a set of 3-D transforms, obtained by combining in various ways wavelets, wavelet packets, the discrete cosine transform, and the Karhunen-Loève transform (KLT), and evaluate the coding efficiency of these combinations. Second, we propose a low-complexity version of the KLT, in which complexity and performance can be balanced in a scalable way, allowing one to design the transform that better matches a specific application. Third, we integrate this, as well as other existing transforms, in the framework of Part 2 of the Joint Photographic Experts Group (JPEG) 2000 standard, taking advantage of the high coding efficiency of JPEG 2000, and exploiting the interoperability of an international standard. We introduce an evaluation framework based on both reconstruction fidelity and impact on image exploitation, and evaluate the proposed algorithm by applying this framework to AVIRIS scenes. It is shown that the scheme based on the proposed low-complexity KLT significantly outperforms previous schemes as to rate-distortion performance. As for impact on exploitation, we consider multiclass hard classification, spectral unmixing, binary classification, and anomaly detection as benchmark applications. [ABSTRACT FROM AUTHOR]

Aims. Metis is the first solar coronagraph designed for a space mission and is capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona in a square field of view (FoV) of ±2.9° in width, with an inner circular FoV at 1.6°, thus spanning the solar atmosphere from 1.7 R⊙ to about 9 R⊙, owing to the eccentricity of the spacecraft orbit. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close (0.28 AU, at the closest perihelion) vantage point, achieving increasing out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, allow longer-term studies of the off-limb coronal features, thus finally disentangling their intrinsic evolution from effects due to solar rotation. Methods. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-α line at 121.6 nm. The visible light channel also includes a broadband polarimeter able to observe the linearly polarised component of the K corona. The coronal images in both the UV H I Lyman-α and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15 000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 s can be achieved when observing coronal fluctuations in visible light. Results. The Metis measurements, obtained from different latitudes, will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes the acceleration process and where the onset and initial propagation of coronal mass ejections (CMEs) take place. The near-Sun multi-wavelength coronal imaging performed with Metis, combined with the unique opportunities offered by the Solar Orbiter mission, can effectively address crucial issues of solar physics such as: the origin and heating/acceleration of the fast and slow solar wind streams; the origin, acceleration, and transport of the solar energetic particles; and the transient ejection of coronal mass and its evolution in the inner heliosphere, thus significantly improving our understanding of the region connecting the Sun to the heliosphere and of the processes generating and driving the solar wind and coronal mass ejections. Conclusions. This paper presents the scientific objectives and requirements, the overall optical design of the Metis instrument, the thermo-mechanical design, and the processing and power unit; reports on the results of the campaigns dedicated to integration, alignment, and tests, and to the characterisation of the instrument performance; describes the operation concept, data handling, and software tools; and, finally, the diagnostic techniques to be applied to the data, as well as a brief description of the expected scientific products. The performance of the instrument measured during calibrations ensures that the scientific objectives of Metis can be pursued with success. [ABSTRACT FROM AUTHOR]

Recently, convolutional neural networks (CNNs) have been successfully applied to many remote sensing problems. However, deep learning techniques for multi-image super-resolution (SR) from multitemporal unregistered imagery have received little attention so far. This article proposes a novel CNN-based technique that exploits both spatial and temporal correlations to combine multiple images. This novel framework integrates the spatial registration task directly inside the CNN, and allows one to exploit the representation learning capabilities of the network to enhance registration accuracy. The entire SR process relies on a single CNN with three main stages: shared 2-D convolutions to extract high-dimensional features from the input images; a subnetwork proposing registration filters derived from the high-dimensional feature representations; 3-D convolutions for slow fusion of the features from multiple images. The whole network can be trained end-to-end to recover a single high-resolution image from multiple unregistered low-resolution images. The method presented in this article is the winner of the PROBA-V SR challenge issued by the European Space Agency (ESA). [ABSTRACT FROM AUTHOR]

• Development of an efficient implementation of SparseHash. • Development of an approximated Fast SparseHash. • Theoretical analysis of SparseHash, in terms of preservation of Jaccard coefficient. • Theoretical analysis of SparseHash, in terms of Hamming distance in LSH • Numerical experiments on real datasets (text documents and metagenome clustering). Embeddings provide compact representations of signals in order to perform efficient inference in a wide variety of tasks. In particular, random projections are common tools to construct Euclidean distance-preserving embeddings, while hashing techniques are extensively used to embed set-similarity metrics, such as the Jaccard coefficient. In this letter, we theoretically prove that a class of random projections based on sparse matrices, called SparseHash, can preserve the Jaccard coefficient between the supports of sparse signals, which can be used to estimate set similarities. Moreover, besides the analysis, we provide an efficient implementation and we test the performance in several numerical experiments, both on synthetic and real datasets. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of training a deep neural network for satellite image segmentation so that it can be deployed over images whose statistics differ from those used for training. For example, in postdisaster damage assessment, the tight time constraints make it impractical to train a network from scratch for each image to be segmented. We propose a convolutional encoder–decoder network able to learn visual representations of increasing semantic level as its depth increases, allowing it to generalize over a wider range of satellite images. Then, we propose two additional methods to improve the network performance over each specific image to be segmented. First, we observe that updating the batch normalization layers’ statistics over the target image improves the network performance without human intervention. Second, we show that refining a trained network over a few samples of the image boosts the network performance with minimal human intervention. We evaluate our architecture over three data sets of satellite images, showing the state-of-the-art performance in binary segmentation of previously unseen images and competitive performance with respect to more complex techniques in a multiclass segmentation task. [ABSTRACT FROM AUTHOR]

Abstract Vehicle Make and Model Recognition (VMMR) deals with the problem of classifying vehicles whose appearance may vary significantly when captured from different perspectives. A number of successful approaches to this problem rely on part-based models, requiring however labor-intensive parts annotations. In this work, we address the VMMR problem proposing a deep convolutional architecture built upon multi-scale attention windows. The proposed architecture classifies a vehicle over attention windows which are predicted to minimize the classification error. Through these windows, the visual representations of the most discriminative part of the vehicle are aggregated over different scales which in fact provide more representative features for the classifier. In addition, we define a loss function accounting for the joint classification error across make and model. Besides, a training methodology is devised to stabilize the training process and to impose multi-scale constraints on predicted attention windows. The proposed architecture outperforms state-of-the-art schemes reducing the model classification error over the Stanford dataset by 1.7 % and improving the classification accuracy by 0.2 % and 0.3 % on model and make respectively over the CompCar dataset. Highlights • VMMR can be addressed by formulating a joint loss function. • Predicting attention window scale improves VMMR Performance. • Multi-scale visual representations can increase VMMR accuracy. • Multi-scale patch training enables generating multi-scale attention windows. [ABSTRACT FROM AUTHOR]

Compressive sensing promises to enable bandwidth-efficient on-board compression of astronomical data by lifting the encoding complexity from the source to the receiver. The signal is recovered off-line, exploiting graphical processing unit (GPU)’s parallel computation capabilities to speedup the reconstruction process. However, inherent GPU hardware constraints limit the size of the recoverable signal and the speedup practically achievable. In this work, we design parallel algorithms that exploit the properties of circulant matrices for efficient GPU-accelerated sparse signals recovery. Our approach reduces the memory requirements, allowing us to recover very large signals with limited memory. In addition, it achieves a 10-fold signal recovery speedup, thanks to ad-hoc parallelization of matrix–vector multiplications and matrix inversions. Finally, we practically demonstrate our algorithms in a typical application of circulant matrices: deblurring a sparse astronomical image in the compressed domain. [ABSTRACT FROM PUBLISHER]

The problem of the distributed recovery of jointly sparse signals has attracted much attention recently. Let us assume that the nodes of a network observe different sparse signals with common support; starting from linear, compressed measurements, and exploiting network communication, each node aims at reconstructing the support and the non-zero values of its observed signal. In the literature, distributed greedy algorithms have been proposed to tackle this problem, among which the most reliable ones require a large amount of transmitted data, which barely adapts to realistic network communication constraints. In this paper, we address the problem through a reweighted \ell 1 soft thresholding technique, in which the threshold is iteratively tuned based on the current estimate of the support. The proposed method adapts to constrained networks, as it requires only local communication among neighbors, and the transmitted messages are indices from a finite set. We analytically prove the convergence of the proposed algorithm and we show that it outperforms the state-of-the-art greedy methods in terms of balance between recovery accuracy and communication load. [ABSTRACT FROM AUTHOR]

In this paper, we deal with the localization problem in wireless sensor networks, where a target sensor location must be estimated starting from few measurements of the power present in a radio signal received from sensors with known locations. Inspired by the recent advances in sparse approximation, the localization problem is recast as a block-sparse signal recovery problem in the discrete spatial domain. In this paper, we develop different RSS-fingerprinting localization algorithms and propose a dictionary optimization based on the notion of the coherence to improve the reconstruction efficiency. The proposed protocols are then compared with traditional fingerprinting methods both via simulation and on-field experiments. The results prove that our methods outperform the existing ones in terms of the achieved localization accuracy. [ABSTRACT FROM AUTHOR]

Heterogeneous systems on a single chip composed of a central processing unit, graphics processing unit (GPU), and field-programmable gate array (FPGA) are expected to emerge in the near future. In this context, the system on chip can be dynamically adapted to employ different architectures for execution of data-intensive applications. Motion estimation (ME) is one such task that can be accelerated using FPGA and GPU for high-performance H.264/Advanced Video Coding encoder implementation. This paper presents an inherent parallel low-complexity rate-distortion (RD) optimized fast ME algorithm well suited for parallel implementations, eliminating various data dependencies caused by a reliance on spatial predictions. In addition, this paper provides details of the GPU and FPGA implementations of the parallel algorithm by using OpenCL and Very High Speed Integrated Circuits (VHSIC) Hardware Descriptive Language (VHDL), respectively, and presents a practical performance comparison between the two implementations. The experimental results show that the proposed scheme achieves significant speedup on GPU and FPGA, and has comparable RD performance with respect to sequential fast ME algorithm. [ABSTRACT FROM AUTHOR]

Digital fountain codes have emerged as a low-complexity alternative to Reed-Solomon codes for erasure correction. The applications of these codes are relevant especially in the field of wireless video, where low encoding and decoding complexity is crucial. In this paper, we introduce a new class of digital fountain codes based on a sliding-window approach applied to Raptor codes. These codes have several properties useful for video applications, and provide better performance than classical digital fountains. Then, we propose an application of sliding-window Raptor codes to wireless video broadcasting using scalable video coding. The rates of the base and enhancement layers, as well as the number of coded packets generated for each layer, are optimized so as to yield the best possible expected quality at the receiver side, and providing unequal loss protection to the different layers according to their importance. The proposed system has been validated in a UMTS broadcast scenario, showing that it improves the end-to-end quality, and is robust towards fluctuations in the packet loss rate. [ABSTRACT FROM AUTHOR]