Search

A C18 column packed with core-shell particles was used for the chromatographic separation of sulphonamides in feed and meat by a conventional high performance liquid chromatography system coupled with a diode array detector. Two analytical methods, already used in our laboratory, have been modified without any changes in the extraction and clean-up steps and in the liquid chromatography instrumentation. Chromatographic conditions applied on a traditional 5-µm column have been optimized on a column packed with 2.6 µm core-shell particles. A binary mobile phase [acetate buffer solution at pH 4.50 and a mixture of methanol acetonitrile 50: 50 (v/v)] was employed in gradient mode at the flow rate of 1.2 mL with an injection volume of 6 µL. These chromatographic conditions allow the separation of 13 sulphonamides with an entire run of 13 minutes. Preliminary studies have been carried out comparing blanks and spiked samples of feed and meat. A good resolution and the absence of interferences were achieved in chromatograms for both matrices. Since no change was made to the sample preparation, the optimized method does not require a complete revalidation and can be used to make routine analysis faster., Competing Interests: Conflict of interest: the authors declare no potential conflict of interest.

A high-performance liquid chromatographic method with on-line post-column photochemical derivatization and fluorimetric detection for the simultaneous separation and quantitative determination of aflatoxin (AF) B(1), B(2), G(1), and G(2) in foodstuffs and feed materials is reported.The chromatographic separation is accomplished by using a C(18) column eluted with an isocratic mobile phase consisting of water, methanol, and acetonitrile. The sample preparation requires a simple extraction of aflatoxins with a mixture of water and methanol, and a purification step by immunoaffinity column clean-up. The total analysis time, including sample preparation and chromatographic separation, does not exceed 40 min with a run time of 10 min. The procedure for the determination of aflatoxins in food samples and cereals for animal consumption has been extensively validated, in agreement with Regulation (EC) No. 882/2004, demonstrating the conformity of the method with provisions of Regulation (EC) No. 401/2006 in terms of sensitivity, linearity, selectivity, and precision.

A sensitive and selective analytical method for the quantitative determination of fumonisins B(1) (FB(1)) and B(2) (FB(2)) in maize-based foods for direct human consumption is described. The method, based on high-performance liquid chromatography and fluorescence detection, presents a rapid and automated online post-column derivatization, performed with o-phthalaldehyde and N,N-dimethyl-2-mercaptoethylamine (Thiofluor™). A complete separation of fumonisins is achieved in less than 13 min by using a C18 column and a gradient elution. Fumonisins are extracted from the sample with a mixture of water, acetonitrile, and methanol. The filtered extract is purified by immunoaffinity column and FB(1) and FB(2) are eluted with methanol. The method has been successfully validated, and performances comply with -criteria of the Regulation EC No 401/2006.

A sensitive and reliable analytical method based on immunoaffinity chromatography cleanup followed by HPLC separation and fluorimetric detection is described for the quantitative determination of aflatoxin M(1) in milk. The chromatographic separation is accomplished by using a C18 column and a gradient elution with methanol, acetonitrile, and water. No extraction solvent process is required and a minimal milk sample cleanup is performed by a direct loading of the immunoaffinity columns and elution with methanol. The method has been successfully validated according to Decision EC No 657/2002 by using the conventional validation approach. The results of the validation process demonstrate the agreement of the method with the provisions of Regulation EC No 401/2006.

A sensitive and selective analytical method for the simultaneous separation and quantitative determination of aflatoxins B1, B2, G1 and G2 in foodstuffs and materials for feed has been validated. The method is based on high performance liquid chromatography with on-line post-column photochemical derivatization and fluorescence detection. The chromatographic separation of aflatoxins was accomplished using a C18 column eluted with an isocratic mobile phase consisting of water, methanol and acetonitrile. The sample preparation required a simple extraction of aflatoxins with MeOH/H2O (80:20, v/v) and a purification step by immunoaffinity column cleanup. The total analysis time, including sample preparation and chromatographic separation, did not exceed 40 min with a run time of 10 min. The on-line photochemical derivatization ensures better results in terms of simplicity, sensitivity and reproducibility with respect to chemical derivatization techniques, and provides an increase of the peak resolution and an extent of automation in comparison with the electrochemical ones. The procedure for the determination of aflatoxins in food samples and cereals for animal consumption was extensively validated following Regulation (EC) No. 882/2004. Detection limits in wheat bran samples of 0.08 μg kg1 for AFB1, 0.02 μg kg1 for AFB2, 0.16 μg kg1 for AFG1 and 0.04 μg kg1 for AFG2 were attained. The method allows high recovery with mean values ranging from 72 to 94% and it satisfies the necessary requirements for sensitivity, linearity, selectivity, precision and ruggedness, demonstrating the conformity of the method with provisions of Regulation (EC) No. 401/2006.

A sensitive and selective analytical method was developed for the quantitative determination of fumonisins B(1) and B(2) in maize-based foods for direct human consumption. The method, based on high-performance liquid chromatography and fluorescence detection, presents a rapid and automated on-line post-column derivatization, performed with o-phtalaldehyde and N,N-dimethyl-2-mercaptoethylamine. Several factors affecting the separation and detection of fumonisins were investigated, including mobile phase composition, column features, derivatization agent flow-rate and both the excitation and the emission wavelengths. Optimal fluorescence detection was obtained by using a lambda(exc) of 343 nm and a lambda(em) of 445 nm. Under the optimized experimental conditions, a complete separation of fumonisins was obtained in less than 13 min by using a C(18) column and a gradient elution at 0.8 mL/min with methanol and 0.1M phosphate buffer at pH 3.15. The limits of detection for FB(1) and FB(2) were 4 and 5 microg/L corresponding to 5 and 6 microg/kg in matrix. Each fumonisin was determined in the range 40-320 microg/L that correspond to 50-400 microg/kg in matrix. The necessary requirements for accuracy, reproducibility and sensitivity were fulfilled and recovery values ranged from 87 to 94% for FB(1) and from 70 to 75% for FB(2) in cornflake samples at three fortification levels in the range 100-300 microg/kg. The potential of this method, combined with a simple clean-up procedure, was assessed by the measurements of FB(1) and FB(2) in maize-based products, such as maize flour, "polenta", tortillas and cookies.