Search

Background: The first case of COVID-19 emerged in China in 2019 and spread rapidly worldwide. Therefore, all researchers worldwide sought ways to treat and prevent the disease. Since the production of vaccines and new drugs is time-consuming, a good way is to look at existing drugs to find new effects. Objective: Due to the pathogenic mechanism of COVID-19, most of its symptoms, including anosmia, ageusia, and cytokine storm, are dependent on the release of histamine and its activities. Therefore, one category of drugs that may be effective in treating and improving the symptoms of COVID-19 is antihistamines. This paper reviewed studies that have been done so far on the effects of antihistamines, specially famotidine, in COVID-19. Method: A literature search was performed using scientific databases such as PubMed, Web of Science, Scopus, and Google Scholar from the beginning up to December 2021. The most relevant articles considering the potential impacts of antihistamines against COVID-19 were collected. Results: In addition to the current medications prescribed for the treatment of SARS-CoV-2, H1 and H2 blockers are promising drugs for repurposing in the COVID-19 remedy. Several studies on famotidine were performed using virtual screening to determine whether they are effective. Many studies have shown that famotidine use improved COVID-19 symptoms and reduced the need for intubation and mortality. However, few studies concluded that famotidine is ineffective. Conclusion: Antihistamines, and specifically famotidine, are effective in reducing COVID-19 symptoms. Therefore, they are a good choice for combination therapy with other drugs to treat COVID-19.

Background: In pediatrics, many drugs are used without marketing authorization. Recommendations are often based on clinical experience. Therefore, the risk of inappropriate prescription (IP) is high. It is necessary to have a tool for pediatric IP detection. Objectives: This study was performed to develop and validate a Pediatrics: Omission of Prescriptions and Inappropriate Prescriptions (POPI) screening tool to facilitate its use in pediatric practice in Iran. Methods: Using forward- and backward-translation procedures, an efficient and effective tool was provided in the current study and clinical settings. The two-round Delphi technique established content validity. The criteria were then piloted in a cross-sectional study in the pediatric patients of Khorasan Razavi and East Azerbaijan in Iran. Results: A total of 104 explicit criteria (79 IPs and 25 omissions) were obtained and submitted to an 18-member expert panel (including 8 pharmacists, 2 clinical pharmacists, and 8 pediatricians working in a hospital or the community). Then, 98 out of the 104 criteria submitted to the experts were selected after two Delphi rounds (75 IPs and 23 omissions). The content validity and reliability of the tool were obtained by expert assessment (Cronbach’s alpha for the entire criteria: 0.60). At least, the rate of one inappropriate prescribed medication was 69% in Mashhad, almost twice that of Tabriz (35%). Conclusions: The modified POPI criteria comprise the first screening tool to assess rational prescriptions for pediatric patients in hospital and outpatient settings. Clinical validation and reliability studies are needed and planned by the authors to evaluate the usability and reliability of this tool.

After the spread of Covid 19 worldwide, the use of cloth masks increased significantly due to a shortage of medical masks. Meanwhile, there were different opinions about the effectiveness of these masks and, so far, no study has been done to find the best fabric masks. This study reviews and summarizes all studies related to fabric masks' effectiveness and various fabrics against coronavirus. This systematic review is based on PRISMA rules. Two researchers separately examined three databases: PubMed, Scopus, and Web of Science. Laboratory and clinical studies were included. After extracting the articles, their quality was assessed with the Joanna Briggs Institute (JBI) tool. In addition to efficacy, other factors, including the penetration of masks, pressure drop, and quality factor, were examined to select the best fabrics. Of the 42 studies selected, 39 were laboratory studies, and 3 were clinical studies. Among the various fabrics examined, cotton quilt 120 thread per inch (TPI), copy paper (bonded), hybrid of cotton with chiffon/ silk, and flannel filtration were found to have over 90% effectiveness in the particle size range of Covid-19. The results and comparison of different factors (pressure drop, filtration efficacy, penetration, filtration quality, and fit factor have been evaluated) showed that among different fabrics, hybrid masks, 2-layered cotton quilt, 2-layered 100% cotton, cotton flannel, and hairy tea towel + fleece sweater had the best performance. Clinical studies have not explicitly examined cloth masks' effectiveness in Covid-19, so the effectiveness of these types of masks for Covid 19 is questionable, and more studies are needed.

Abstract: A class of organic chemicals known as polychlorinated biphenyls (PCBs) consists of chlorine, hydrogen, and carbon atoms. High boiling points, chemical stability, non-flammability, and insulating properties have enabled them to be used in various industries. Because of their high toxicity, PCBs were one of the first industrial compounds to be banned from production. These compounds have high-fat solubility with bioaccumulation and biomagnification properties in the environment, food chain, and individuals. Hence, they may have an impact not only on individual organisms but ultimately on whole ecosystems. The main sources of PCB exposure are food and environmental pollutants. In the toxicology of PCBs, oxidative stress plays the most influential function. The induction of CYP1A1 due to the high affinity of PCBs for aryl hydrocarbon receptors is considered a trigger for oxidative stress. Production of reactive oxygen species and depletion of glutathione occur due to phase Ⅰ and Ⅱ metabolism, respectively. Thus, cellular redox balance may be disrupted in the presence of PCBs and their metabolites. Chronic and long-term exposure to these compounds can often lead to life-threatening diseases, like diabetes, obesity, cardiovascular and neurological diseases, cancer, and reproductive and endocrine disorders. We present the current knowledge of the routes of PCB exposure and bioaccumulation, the outlook regarding environmental and food safety, the potential role of PCBs in various diseases, the principal mechanisms responsible for PCB toxicity, and the main detection techniques used for PCBs.

The habit of smoking remains a severe public health problem. Heavy metals in cigarettes and mainstream smoke have been extensively investigated. This study has attempted to determine the essential and toxic elements in a biological sample of smokers and non-smokers. In this case-control study, 100 smokers were compared with 100 age- and gender-matched non-smoker healthy subjects. The smoker group was selected via the snowball sampling method. Serum concentrations of trace elements were determined using ICP-MS (Agilent 7900) for subsequent analysis. Data were analyzed by SPSS software using t test or Mann-Whitney U test along with chi-square test at the significant level of less than 0.05. The results of this study indicated that subjects in the smoker group compared with non-smokers had a significantly higher median of manganese (Mn) (11.5 [5.7-17.2] versus 6 [4-12.5] (μg/L), p = 0.003), copper (Cu) (40 [34-47.2] versus 34 [29-42] (μg/L), p = 0.005), arsenic (As) (39 [9-49.2] versus 12 [5-42] (μg/L), p = 0.007), thallium (Tl) (0.54 [0.27-0.68] versus 0.34 [0.11-0.66] (μg/L), p = 0.04), and lower iron (Fe) concentration (218 [156-508] versus 429 [192-573] (μg/L), p = 0.03). This study found that the concentrations of Mn, Cu, As, and TI in cigarette smokers were significantly higher than those obtained from the control group. These results can provide health policymakers with the necessary information to take public health measures towards preventive interventions in the community, though further studies are still warranted.

Pesticides are toxic and biological substances used for mitigating harmful pests. Their application in agricultural fields and homes increased environmental pollution. Studies showed their harmful effects on human health, specifically children, who are more vulnerable than adults. The International Agency for Research on Cancer (IARC) has introduced several pesticides as carcinogens. This study aims to systematically summarize and review all studies related to pesticides and cancer.This systematic review is based on PRISMA rules. Three central databases were employed to find studies on pesticide exposure and cancer correlation published from 2017 to September 2022.After reviewing several studies, we found that most studies revealed a significant relationship between pesticide exposure and an increased cancer incidence rate. Among the most studied group of pesticides is organochlorine (OC) pesticides. OC pesticides and their residues could significantly increase cancer in children and adults. Mechanistic studies revealed that pesticides could increase the risk of different cancers by genetics, like an increased expression of some genes like p21, p53 or epigenetic impairments. Cell cycle impairments like expanding the G1 to S phase transition are another mechanism of causing cancer. DNA methylation and histone modifications increase the risk of numerous cancers.Based on epidemiological studies, pesticides are a significant concern to human health, specifically cancer development, and should be more restrained. Their most reported mechanism of action were genetic and epigenetic impairments which cause cancers.

Statins are a wide category of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase inhibitor drugs extensively prescribed for hypercholesterolemia. In fact, many studies showed beneficial effects of these agents on a variety of related illnesses, which include increased atherosclerotic plaque stability, decreased proliferation of vascular smooth muscle, platelet aggregation, the dampening of vascular inflammation, and also anabolic effects on bone tissue. Therefore, these drugs are considered as pleiotropic agents having different clinical applications other than those for which they were initially developed. Controlled drug delivery is an efficient way of delivery in tissue engineering. Amongst different controlled release formulations, nanofibers are a novel, alternative, widely used agent because of their unique properties. These include their sustained release of drug, a high drug-loading capacity, flexible shapes with a high surface-to-volume ratio, and superior porosity. Electrospinning is an economic and a simple method employed to produce nanofibers. In this report, studies related to statin nanofiber applications have been reviewed and their results have been summarized. Four different applications of statin nanofibers have been reported, including bone generation, endothelial stenosis and thrombosis, peripheral nerve injury, and anti-inflammatory action. Studies carried out both in vitro and in vivo showed effectiveness of statins in bone healing, aneurysm, and the healing of sciatic nerve injury. In addition, statins showed apoptosis effects and anti-inflammatory effects, with dose-dependent reduction of IL-6 and dose-independent reduction of TNF-α. Despite these promising results, validation via clinical trials is yet to be performed. The scope of statins in their pleiotropic range of actions is still not completely explored, and studies are still needed to enlighten different useful aspects of such drugs.

Abstract: Development of novel treatment methods for cancer is needed given the limitations of current treatment methods, including side effects and chemotherapeutic resistance, which may provide new hope to cancer patients. Cancer is the second leading cause of global mortality. Curcumin, the active ingredient of turmeric, has been used since ancient times for various therapeutic purposes. Several studies have identified its activity against cancer. Despite the established anticancer activity of curcumin, its low aqueous solubility and bioavailability are barriers to its effectiveness. In an attempt to solve this problem, many studies have formulated curcumin nanofiber preparations using a variety of methods. Electrospinning is a simple and affordable method for the production of nanofibers. Studies have shown increased curcumin bioavailability in nanofibers resulting from their high surface/volume ratio and porosity. We have undertaken a detailed review of studies on the anticancer effects of curcumin nanofibers. Curcumin acts by inhibiting various biological cancer pathways, including NF-κB, mTOR, complex I, cytokines, expression of p-p65, Ki67, and angiogenesis-associated genes. It also induces apoptosis through activation of caspase pathways and ROS production in cancer cells. Curcumin-loaded PLA50/PVP50/Cur15 nanofibers were investigated in breast cancer, one of the most studied cancers, and was shown to have significant effects on the widely used HeLa-cell line. Most of the studies undertaken have been performed in cell lines in vitro, while relatively few animal studies have been reported. More preclinical and clinical studies are needed to evaluate the anticancer activity of curcumin nanofibers. Amongst studies undertaken, a variety of curcumin nanofibers of various formulations have been shown to suppress a variety of cancer types. Overall, curcumin nanofibers have been found to be more efficient than free curcumin. Thus, curcumin nanofibers have been observed to improvise cancer treatment, offering great potential for effective cancer management. Further studies, both in vitro and in vivo, involving curcumin nanofibers have the potential to benefit cancer management.

The habit of smoking remains a severe public health problem. Heavy metals in cigarettes and mainstream smoke have been extensively investigated. This study has attempted to determine the essential and toxic elements in a biological sample of smokers and non-smokers. In this case-control study, 100 smokers were compared with 100 age- and gender-matched non-smoker healthy subjects. The smoker group was selected via the snowball sampling method. Serum concentrations of trace elements were determined using ICP-MS (Agilent 7900) for subsequent analysis. Data were analyzed by SPSS software using t test or Mann-Whitney U test along with chi-square test at the significant level of less than 0.05. The results of this study indicated that subjects in the smoker group compared with non-smokers had a significantly higher median of manganese (Mn) (11.5 [5.7-17.2] versus 6 [4-12.5] (μg/L), p = 0.003), copper (Cu) (40 [34-47.2] versus 34 [29-42] (μg/L), p = 0.005), arsenic (As) (39 [9-49.2] versus 12 [5-42] (μg/L), p = 0.007), thallium (Tl) (0.54 [0.27-0.68] versus 0.34 [0.11-0.66] (μg/L), p = 0.04), and lower iron (Fe) concentration (218 [156-508] versus 429 [192-573] (μg/L), p = 0.03). This study found that the concentrations of Mn, Cu, As, and TI in cigarette smokers were significantly higher than those obtained from the control group. These results can provide health policymakers with the necessary information to take public health measures towards preventive interventions in the community, though further studies are still warranted.

Coronary slow flow (CSF) is an important angiographic entity that is characterized by delayed opacification of coronary arteries in the absence of epicardial occlusive disease. Asymmetric dimethylarginine (ADMA) is an endogenous inhibitor of nitric oxide synthase. Elevated levels of ADMA cause the induction of endothelial dysfunction and thus promote atherosclerosis. This study was aimed at determining the role of ADMA in the development of CSF. One hundred twenty-nine subjects who fulfilled the inclusion criteria were enrolled in this study. According to coronary angiography results, these subjects were divided into five groups. The serum concentration of ADMA was measured in these subjects. In this study, there was no significant correlation between serum concentrations of ADMA and mean corrected TIMI frame count (CTFC) (P > 0.05). However, the ADMA level was significantly correlated with CTFC in the left anterior descending (LAD) coronary artery in patients with CSF (r = -0.381, P = 0.045). Also, plasma ADMA levels were significantly higher in patients with CSF and without CAD compared to patients without CSF and with CAD (50-90%) (P = 0.034). Besides, serum concentrations of ADMA were significantly higher in subjects with BMI 30 kg/m2 (P = 0.003). It was also shown that the levels of ADMA were significantly higher in subjects with age as a cardiovascular risk factor compared with those without this risk factor (P = 0.024). Further studies with larger population sizes are needed to confirm the present findings on the association between the serum concentrations of ADMA and CSF.