Search

AIMS: To evaluate the electromyographic (EMG) activity of masseter and temporalis muscles in relation to impact awareness, gender, impact magnitude, and kinematics of head movement in simulated low-velocity rear-end impacts. METHODS: Twenty-nine individuals (17 men and 12 women) were subjected in random order to 3 rear-end impacts: 2 unexpected impacts (chair accelerations of 4.5 m/s2 and 10.1 m/s2) and 1 expected impact (chair acceleration of 10.1 m/s2). The EMG activity of the deep and superficial masseter muscle was recorded bilaterally. EMG activity was also recorded for the left anterior temporalis muscle. Angular acceleration and angular displacement of the head were also recorded. The temporal relationship between onset of the masticatory muscle activity and maximum peak of the kinematics of head movement was determined. RESULTS: The magnitude of normalized masticatory EMG activity ranged from 1.4 to 1.8 times higher (P < .05) for fast unexpected impacts compared to slow unexpected impacts in all masticatory muscles. The magnitude of normalized anterior temporalis EMG peak response ranged from 1.8 to 2.5 times higher (P < .05) in female subjects than in male subjects for all impacts. No significant differences were identified for impact awareness in the magnitude of normalized EMG activity for any masticatory muscle. No significant differences were identified with respect to timing of masticatory muscle response (P > .05). CONCLUSION: EMG activity increased with increased impact magnitude. Temporal and amplitude awareness of a simulated impact did not produce a difference in the masticatory muscle response. Gender differences were identified in the anterior temporalis muscle response. The onset of the masticatory muscle response occurred after peak angular acceleration of the head but prior to peak angular displacement of the head. [ABSTRACT FROM AUTHOR]

AIMS: To carry out a systematic review to assess the evidence concerning the association between head and cervical posture and temporomandibular disorders (TMD). METHODS: A search of Medline, Pubmed, Embase, Web of Science, Lilacs, and Cochrane Library databases was conducted in all languages with the help of a health sciences librarian. Key words used in the search were posture, head posture, cervical spine or neck, vertebrae, cervical lordosis, craniomandibular disorders or temporomandibular disorders, temporomandibular disorders, and orofacial pain or facial pain. Abstracts which appeared to fulfill the initial selection criteria were selected by consensus. The original articles were retrieved and evaluated to ensure they met the inclusion criteria. A methodological checklist was used to evaluate the quality of the selected articles and their references were hand-searched for possible missing articles. RESULTS: Twelve studies met all inclusion criteria and were analyzed in detail for their methodology and information quality. Nine articles that analyzed the association between head posture and TMD included patients with mixed TMD diagnosis; 1 article differentiated among muscular, articular, and mixed symptomatology; and 3 articles analyzed information from patients with only articular problems. Finally, 2 studies evaluated the association between head posture and TMD in patients with muscular TMD. Several methodological defects were noted in the 12 studies. CONCLUSION: Since most of the studies included in this systematic review were of poor methodological quality, the findings of the studies should be interpreted with caution. The association between intra-articular and muscular TMD and head and cervical posture is still unclear, and better controlled studies with comprehensive TMD diagnoses, greater sample sizes, and objective posture evaluation are necessary. [ABSTRACT FROM AUTHOR]

Clinical trials employ sequential analysis for the ethical and economic benefits it brings. In dentistry, as in other fields, resources are scarce and efforts are made to ensure that patients are treated ethically. The objective of this systematic review was to characterise the use of sequential analysis for clinical trials in dentistry. We searched various databases from 1900 through to January 2008. Articles were selected for review if they were clinical trials in the field of dentistry that had applied some form of sequential analysis. Selection was carried out independently by two of the authors. We included 18 trials from various specialties, which involved many different interventions. We conclude that sequential analysis seems to be underused in this field but that there are sufficient methodological resources in place for future applications.Evidence-Based Dentistry (2008) 9, 55–62. doi:10.1038/sj.ebd.6400587 [ABSTRACT FROM AUTHOR]

Introduction: The aim of this systematic review was to quantify the amount of true molar intrusion attainable during orthodontic treatment. Methods: A literature search was conducted to identify clinical trials that assessed true molar intrusion through superimposition of lateral cephalogram tracings. Craniofacial growth had to be factored out when appropriate. Electronic databases (Pubmed, Medline, Medline In-Process & Other Non-Indexed Citations, all EBM reviews, Embase, Web of Science, and Lilacs) were searched with the help of a senior health-sciences librarian. Abstracts that appeared to fulfill the initial selection criteria were selected, and the full-text original articles were then retrieved and analyzed. Only articles that fulfilled the final selection criteria were finally considered. Their references were also hand-searched for possible missing articles from the database searches. Results: Thirty abstracts met the initial inclusion criteria, and these articles were retrieved. From these, 29 were later rejected because they did not either quantify true molar intrusion or factor out normal craniofacial growth when required. Only 1 article remained, and it showed a mean maxillary molar intrusion of 0.96 mm (SD, 0.54) in 12 subjects. Conclusions: True molar intrusion appears to be achievable in the maxillary arch, although the amount of evidence is minimal. The clinical significance of the magnitude of the true intrusion reported is questionable as the sole treatment option to correct open-bite malocclusions. Better quantification method of the true intrusion attained has to be utilized. [ABSTRACT FROM AUTHOR]

OBJECTIVE: The objective of this study was to compare condyle shape between lateral temporomandibular joint (TMJ) images from axially corrected tomography and 3 panoramic radiography units with TMJ-specific programs. STUDY DESIGN: The TMJ from a single dry human skull was imaged with multidirectional tomography and the following 3 panoramic radiography units: Instrumentarium OP 100, Planmeca PM 2002 CC Proline, and Soredex Orthophos DS. A curve-fitting procedure (spline curves) was used to mathematically describe condyle outlines. One sample t tests were used to compare panoramic images against the tomograms (gold standard). RESULTS: A significant difference (P < .05) in condyle shape was found between TMJ tomography images and each of the 3 panoramic images. Images from the PM 2002 CC Proline demonstrated the smallest shape difference (13.4%), followed by the OP 100 (17.5%) and the Orthophos DS (24.8%). CONCLUSION: If panoramic radiography is to be used for the initial radiographic examination of the TMJ, practitioners should be aware of the potential for shape distortion of the condyle. [ABSTRACT FROM AUTHOR]

Introduction: The purpose of this study was to compare the transverse, vertical, and anteroposterior skeletal and dental changes in adolescents receiving expansion treatment with tooth-borne and bone-anchored expanders. Immediate and long-term changes were measured on cone-beam computed tomography (CBCT) images. Methods: Sixty-two patients needing maxillary expansion were randomly allocated to 1 of 3 groups: traditional hyrax tooth-borne expander, bone-anchored expander, and control. CBCT images were taken at baseline, immediately after expansion, after removal of the appliance (6 months), and just before fixed bonding (12 months). Repeated measures multivariate analysis of variance (MANOVA) was applied to the distances and angles measured to determine the statistical significance in the immediate and long time periods. Bonferroni post-hoc tests were used to identify significant differences between the treatment groups. Results: Immediately after expansion, the subjects in the tooth-borne expander group had significantly more expansion at the crown level of the maxillary first premolars (P = 0.003). Dental crown expansion was greater than apical expansion and skeletal expansion with both appliances. The control group showed little change (growth) over the 6-month interval. At 12 months, no group had a statistically significant difference in angle changes, suggesting symmetric expansion. Both treatment groups had significant long-term expansion at the level of the maxillary first molar crown and root apex, first premolar crown and root, alveolus in the first molar and premolar regions, and central incisor root. Tooth-borne expansion resulted in significantly more long-term expansion at the maxillary premolar crown and root than did bone-borne expansion. Conclusions: Both expanders showed similar results. The greatest changes were seen in the transverse dimension; changes in the vertical and anteroposterior dimensions were negligible. Dental expansion was also greater than skeletal expansion. [ABSTRACT FROM AUTHOR]

The aim of this study was to determine if cephalometric measurement differences occurred between two groups of similarly aged female adolescents which differed with respect to their diagnoses of temporomandibular joint disc position on magnetic resonance images (MRI). One group consisted of 17 female adolescents exhibiting complete bilateral disc displacement affecting the temporomandibular joints (TMJ), while the second group of 17 female adolescents was diagnosed as having bilateral normal disc position on MRI. Independent sample t-tests identified statistically significant differences in cephalometric measurements between the two groups, but no age difference between the two groups was evident. The group with bilateral total disc displacement exhibited the following significant angular differences from the group with normal disc position: an increased mandibular and palatal plane relative to sella-nasion; posterior rotation of the mandible as illustrated by an increased angle between the posterior border of the mandibular ramus and sella-nasion; and a decrease in Rickett's facial axis. Significant differences in linear cephalometric variables were also evident between the two groups. Total posterior facial height and ramus height were reduced in the totally disc displaced group. Furthermore, a slight increase in the middle anterior facial height was noted, with a decrease in the posterior cranial base vertical height in the totally disc displaced group. [ABSTRACT FROM AUTHOR]

The objective of the presented study was to evaluate the biomechanics of aligners utilising attachments and the effect of their placement for extrusion. An in vitro Orthodontic SIMulator (OSIM) was used to measure forces and moments produced through aligners incorporating attachments. The maxillary teeth on OSIM were digitally scanned to generate an STL model that was modified by placing a rectangular shaped attachment. Four models were designed with variation in attachment placement: Model NA-no attachment; model BA-buccal attachment; model LA-lingual attachment; model BL-both buccal and lingual attachments. Aligners (n = 30/model) were fabricated using a 0.75 mm thick polyethylene terephthalate material using a Biostar machine following the manufacturer's recommendations. A one-way MANOVA, followed by one-way ANOVA was used to test the effect of models on occlusogingival force (Fz) and mesiodistal moment (Mx) at 0.20 mm of gingival displacement of the left lateral incisor. The BL model exerted maximum Fz (1.22 ± 0.20 N), followed by models BA (1.18 ± 0.25 N) and LA (1.07 ± 0.19 N). The model NA exerted a negligible Fz (0.14 ± 0.08 N) that was statistically different from all other models. The models BA and LA generated Mx that has the tendency to tip the crown of tooth lingually (10.00 ± 3.12 Nmm) and buccally (-1.29 ± 2.26 Nmm), respectively. The models show statistically significant differences between models BL, BA and LA. There was no statistically significant difference between models BL and NA. The experimental evidence suggest that attachments on the lateral incisor could improve the predictability of extrusion forces applied with aligners. The models BL and LA provided favourable biomechanics by generating clinically significant extrusion forces without significant tipping of the lateral incisor tooth., (© 2025 The Author(s). Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Objectives: To compare the biomechanics of labial and lingual fixed orthodontic treatment options for a simulated curve of Spee malocclusion., Materials and Methods: An in vitro electromechanical orthodontic simulator was used to measure the three-dimensional forces and moments on each tooth of a mandibular arch. Labial and lingual brackets, both with 0.018-inch slot sizes, were bonded to mechanical teeth. Three archwire forms were considered: labial straight, lingual straight, and lingual mushroom. The simulator was set in a passive levelled position with 0.016-inch × 0.022-inch stainless steel archwires, then teeth were moved to a curve of Spee maloclussion with the first premolar intruded 1.5 mm and the canine and second premolar intruded 0.75 mm. Two-way mixed multivariate analysis of variance (α = 0.05) was used to compare forces and moments generated among the three archwires., Results: Statistical differences were found in 55 of 63 comparisons of forces and moments between archwire types for each tooth around the arch. The lowest force magnitudes were measured for labial straight archwires at each tooth position. The lateral incisor experienced the largest gingival forces with all archwire forms. The first premolar and first molar experienced labial-lingual crown tipping moments in opposite directions between labial and the two lingual archwire forms., Conclusions: Biomechanical differences between labial, lingual straight, and lingual mushroom treatment modalities for the correction of curve of Spee misalignments were elucidated. Labial straight archwire exerted the lowest force magnitudes overall. For both lingual archwire forms, the labial-lingual inclination of the first premolar could be highly variable during levelling., (© 2025 by The EH Angle Education and Research Foundation, Inc.)

Objectives: This study aimed to evaluate the reliability and accuracy of an intraoral ultrasound (US) device to evaluate alveolar bone by comparing it between different raters and to microCT (µCT) measurements., Methods: 38 teeth distributed across three human cadavers were prepared by placing two notches on the facial enamel surface. The maxillary and mandibular teeth were imaged with a custom-designed intraoral 20 MHz ultrasound and µCT with 0.03 mm voxel size. µCT was considered the reference standard for this study. For each sample, the distance from the inferior border of the most apical notch to the tip of the alveolar bone crest on the facial aspect of the teeth was measured from the US and µCT images. Intraclass correlation coefficient (ICC) and standard deviation were calculated., Results: The intra-examiner and inter-examiner reliability for both the µCT and US alveolar bone measurements were found to be excellent (intra-examiner ICC was 0.998 for µCT and 0.997 for US, inter-examiner ICC was 0.996 for µCT and between 0.947 and 0.950 for US). The accuracy of the US was found to be good compared to µCT (ICC between 0.885 and 0.894)., Conclusion: The study demonstrated that intraoral ultrasound is highly reliable and accurate compared to the µCT reference standard for evaluating facial alveolar bone height., Competing Interests: Declarations. Conflict of interest: The authors declare that they have no conflict of interest. Ethical approval: This study involves the secondary use of anonymous biological material, which is exempt from ethics approval according to the University of Alberta ethics board., (© 2024. The Author(s) under exclusive licence to Japanese Society for Oral and Maxillofacial Radiology.)

Objectives: To summarize the current evidence on the performance of artificial intelligence (AI) algorithms for the temporomandibular joint (TMJ) disc assessment and TMJ internal derangement diagnosis in magnetic resonance imaging (MRI) images., Methods: Studies were gathered by searching 5 electronic databases and partial grey literature up to May 27, 2024. Studies in humans using AI algorithms to detect or diagnose internal derangements in MRI images were included. The methodological quality of the studies was evaluated using the Quality Assessment Tool for Diagnostic of Accuracy Studies-2 (QUADAS-2) and a proposed checklist for dental AI studies., Results: Thirteen studies were included in this systematic review. Most of the studies assessed disc position. One study assessed disc perforation. A high heterogeneity related to the patient selection domain was found between the studies. The studies used a variety of AI approaches and performance metrics with CNN-based models being the most used. A high performance of AI models compared to humans was reported with accuracy ranging from 70% to 99%., Conclusions: The integration of AI, particularly deep learning, in TMJ MRI, shows promising results as a diagnostic-assistance tool to segment TMJ structures and classify disc position. Further studies exploring more diverse and multicentre data will improve the validity and generalizability of the models before being implemented in clinical practice., (© The Author(s) 2024. Published by Oxford University Press on behalf of the British Institute of Radiology and the International Association of Dentomaxillofacial Radiology. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Individuals with malocclusion require an orthodontic diagnosis and treatment plan based on the severity of their condition. Assessing and monitoring changes in periodontal structures before, during, and after orthodontic procedures is crucial, and intraoral ultrasound (US) imaging has been shown a promising diagnostic tool in imaging periodontium. However, accurately delineating and analyzing periodontal structures in US videos is a challenging task for clinicians, as it is time-consuming and subject to interpretation errors. This paper introduces DetSegDiff, an edge-enhanced diffusion-based network developed to simultaneously detect the cementoenamel junction (CEJ) and segment alveolar bone structure in intraoral US videos. An edge feature encoder is designed to enhance edge and texture information for precise delineation of periodontal structures. Additionally, we employed the spatial squeeze-attention module (SSAM) to extract more representative features to perform both detection and segmentation tasks at global and local levels. This study used 169 videos from 17 orthodontic patients for training purposes and was subsequently tested on 41 videos from 4 additional patients. The proposed method achieved a mean distance difference of 0.17 ± 0.19 mm for the CEJ and an average Dice score of 90.1% for alveolar bone structure. As there is a lack of multi-task benchmark networks, thorough experiments were undertaken to assess and benchmark the proposed method against state-of-the-art (SOTA) detection and segmentation individual networks. The experimental results demonstrated that DetSegDiff outperformed SOTA approaches, confirming the feasibility of using automated diagnostic systems for orthodontists., Competing Interests: Declaration of competing interest None Declared., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Innovative intraoral ultrasound devices with smart artificial intelligence-based identification for dento-anatomy could provide crucial information for oral health diagnosis and treatment and shed light on real-time detection of developmental dentistry. However, the grand challenge is that the current ultrasound technologies are meant for external use due to their bulkiness and low frequency. We report a compact versatile ultrasound intraoral device that consists of a rotational probe head robustly pivoted around a hand-held and portable handle for real-time imaging of intraoral anatomy using high-frequency ultrasonography (up to 25 MHz). The intraoral ultrasound device that could be adjusted for various orientations of the imaging planes by rotating the head provides real-time, high-resolution ultrasonograms of intraoral structures, including dento-periodontium of most tooth types and maxillary palate. Machine learning-based algorithms are integrated to automate the identification of important structures, including alveolar bone and cementum-enamel junction. The intraoral ultrasound device smartened with artificial intelligence could innovate oral health diagnosis and treatment plans toward precision health and patient care.

Introduction: To evaluate biomechanics of an aligner utilizing divots and the effect of their vertical placement on the right maxillary central incisor., Methods: An in vitro Orthodontic SIMulator (OSIM) was used to test forces and moments generated by aligners incorporating divots. The OSIM arch was scanned to generate a. STL version that was modified to create four models by placing divots on different positions of the right central maxillary incisor: GI - divots on gingival-third of lingual surface and incisal-third of labial surface; GM - divots on gingival-third of lingual surface and middle-third of labial surface; MI - divots on middle-third of lingual surface and incisal-third of labial surface; MM - divots on middle-third of lingual surface and middle-third of labial surface. Aligners (n = 30/model) were fabricated using a 0.75 mm thick polyethylene terephthalate material and Biostar® machine following the manufacturer's recommendations. A one-way MANOVA followed by one-way ANOVA (α = 0.05) was utilized to test effect of models on buccolingual force (Fy) and mesiodistal moment (Mx) at 0.20 mm of lingual displacement of the right maxillary central incisor., Results: Mean Mx for GI (-5.68 ± 7.38 Nmm), GM (3.75 ± 5.54 Nmm), MI (-4.27 ± 1.48 Nmm) and MM (1.96 ± 0.99 Nmm) models showed statistical differences between GI and GM, GI and MM, GM and MI and MI and MM. GI exerted the largest Fy (1.87 ± 0.75 N) followed by GM (1.10 ± 0.47 N), MI (0.70 ± 0.23 N) and MM (0.28 ± 0.08 N) with significant differences between GI and GM, GI and MI, GI and MM and GM and MM models., Conclusions: Vertical divot placement on a right central incisor had a significant effect on aligner biomechanics. Buccolingual forces exerted by models GI, GM and MI were within the range suggested by literature for bodily tooth movement without major root tipping for GM and MI models., (© 2024 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Objective: Idiopathic condylar resorption (ICR), also known as progressive condylar resorption, is poorly understood, particularly in adolescent patients. Therefore, this scoping review aims to summarize the available literature on the prevalence, aetiology, pathogenesis, diagnostic process, treatment and/or any outcome regarding ICR in adolescent individuals., Methods: This scoping review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and its extension for scoping reviews (PRISMA-ScR), as well as Joanna Briggs Institute studies. The search strategy was defined adopting a core search structure for each source, and the search was performed on MEDLINE, EMBASE, Cochrane Library, Web of Science, Scopus and Google Scholar. After duplicate removal, two independent reviewers screened abstracts, followed by complete articles, to achieve the definition of included studies. Data collection was performed, and the extracted data were organized in tabular form, along with a narrative summary of main findings that aligns with the objective of this review., Results: Six observational studies were included in this review. Three studies focused on signs and symptoms, one on prevalence and signs and symptoms, one on treatment and one on disease pathogenesis., Conclusion: This scoping review revealed inadequate published research regarding prevalence, aetiology, early diagnosis, pathogenesis and treatment of ICR in adolescents., (© 2024 The Authors. Journal of Oral Rehabilitation published by John Wiley & Sons Ltd.)

Objective: Rapid maxillary expansion is a common orthodontic procedure to correct maxillary constriction. Assessing the midpalatal suture (MPS) expansion plays a crucial role in treatment planning to determine its effectiveness. The objectives of this preliminary investigation are to demonstrate a proof of concept that the palatal bone underlying the rugae can be clearly imaged by ultrasound (US) and the reconstructed axial view of the US image accurately maps the MPS patency., Methods: An ex-vivo US scanning was conducted on the upper jawbones of two piglet's carcasses before and after the creation of bone defects, which simulated the suture opening. The planar images were processed to enhance bone intensity distribution before being orderly stacked to fuse into a volume. Graph-cut segmentation was applied to delineate the palatal bone to generate a bone volume. The accuracy of the reconstructed bone volume and the suture opening was validated by the micro-computed tomography (µCT) data used as the ground truth and compared with cone beam computed tomography (CBCT) data as the clinical standard. Also included in the comparison is the rugae thickness. Correlation and Bland-Altman plots were used to test the agreement between the two methods: US versus µCT/CBCT., Results: The reconstruction of the US palatal bone volumes was accurate based on surface topography comparison with a mean error of 0.19 mm for pre-defect and 0.15 mm and 0.09 mm for post-defect models of the two samples, respectively when compared with µCT volumes. A strong correlation (R 2 ≥ 0.99) in measuring MPS expansion was found between US and µCT/CBCT with MADs of less than 0.05 mm, 0.11 mm and 0.23 mm for US, µCT and CBCT, respectively., Conclusions: It was possible to axially image the MPS opening and rugae thickness accurately using high-frequency ultrasound., Clinical Significance: This study introduces an ionizing radiation-free, low-cost, and portable technique to accurately image a difficult part of oral cavity anatomy. The advantages of conceivable visualization could promise a successful clinical examination of MPS to support the predictable treatment outcome of maxillary transverse deficiency., Competing Interests: Declaration of competing interest The authors declare no potential conflicts of interest with respect to the authorship and/or publication of this article., (Copyright © 2024. Published by Elsevier Ltd.)

Objectives: To evaluate the change in tooth root volume using cone-beam computed tomography (CBCT) in a group of patients treated concurrently with clear aligners and an adjunctive photobiomodulation (PBM) device., Materials and Methods: This retrospective cohort pilot study included the records of 32 consecutively treated clear aligner patients (23 female, 9 male) from the private practice of one orthodontist. The PBM group (n = 16) used the device once per day for 5 minutes per arch and was compared with a matched control group (n = 16). A semiautomated segmentation technique was used to obtain tooth volume of anterior teeth from CBCT imaging prior to (T0) and during or immediately following (T1) orthodontic treatment with clear aligners. The change in root volume between time points was assessed., Results: There was no statistically significant difference between the pre- and posttreatment root volumes of maxillary and mandibular anterior teeth, regardless of which intervention group the patient belonged to (P > .05). There was also no difference in the mean percentage change in root volume between clear aligner patients in this study who were treated with the PBM device compared with a matched control group (P > .05)., Conclusions: Clear aligner patients in this study who changed their aligners every 3 to 5 days and used adjunctive photobiomodulation therapy did not experience clinically relevant orthodontically induced external root resorption. Due to the small sample size and measurement error in the root segmentation process, the results should be interpreted with caution., (© 2024 by The EH Angle Education and Research Foundation, Inc.)

Objective: Ultrasound is a non-invasive and low-cost diagnostic tool widely used in medicine. Recent studies have demonstrated that ultrasound imaging might have the potential to be used intraorally to assess the periodontium by comparing it to current imaging methods. This study aims to characterize the repeatability of intraoral periodontal ultrasound imaging., Materials and Methods: Two hundred and twenty-three teeth were scanned from fourteen volunteers participating in this study. One operator conducted all the scans in each tooth thrice with a 20 MHz intraoral ultrasound. The repeatability of three measurements, alveolar bone crest to the cementoenamel junction (ABC-CEJ), gingival thickness (GT), and alveolar bone thickness (ABT), was calculated with intercorrelation coefficient (ICC). Measurements were also compared with mean absolute deviation (MAD), repeatability coefficient (RC), and descriptive statistics., Results: ICC scores for intra-rater repeatability were 0.917(0.897,0.933), 0.849(0.816,0.878), and 0.790(0.746,0.898), MAD results were 0.610 mm (± 0.508), 0.224 (± 0.200), and 0.067 (± 0.060), and RC results were 0.648, 0.327, and 0.121 for ABC-CEJ, GT, and ABT measurements, respectively., Conclusion: Results of the present study pointed towards good or excellent repeatability of ultrasound as a measurement tool for periodontal structures., Clinical Relevance: Clinicians could benefit from the introduction of a novel chairside diagnostic tool. Ultrasound is a non-invasive imaging assessment tool for the periodontium with promising results in the literature. Further validation, establishment of scanning protocols, and commercialization are still needed before ultrasound imaging is available for clinicians., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The objective of this study was to systematically review the literature regarding diagnostic applications of ultrasound imaging for evaluation of the periodontium in humans. The search was conducted on Medline, EMBASE, Web of Science, Scopus, Cochrane, and PubMed up to April 3, 2023. The studies included were exclusively human studies that assessed the periodontium with ultrasound (US) imaging (b-mode). Outcomes measured included alveolar bone level, alveolar bone thickness, gingival thickness, and blood flow quantification. References were imported to Covidence. Two reviewers conducted phases 1 and 2. The JBI risk assessment tool for cross-sectional studies was used. Extracted data included the transducer and measurements used and the study's outcomes. The search yielded 4892 studies after removing duplicates. From these, 25 studies were included and selected for extraction. Included studies retrieved outcomes from US examinations of the periodontal tissues. From the selected studies, 15 used US on natural teeth, 4 used US on implants, 2 used US on edentulous ridges, and 4 used color flow/power in US to evaluate the blood flow. The results of the present systematic review suggest that US might be a feasible and valuable diagnostic tool for the periodontium, with the potential to complement shortfalls of current radiographic technologies., (© 2023 The Authors. Journal of Periodontal Research published by John Wiley & Sons Ltd.)

Introduction: The presented study investigates differences in the biomechanics of straight and mushroom fixed lingual appliances when implementing coil springs and stops for anterior arch expansion., Materials and Methods: An in vitro orthodontic simulator was used to measure three-dimensional forces and moments on each tooth of a simulated maxillary arch. Mushroom and straight archwire forms of 0.016″ NiTi round archwire were considered, using 0.010″ × 0.030″ NiTi open coils and 0.016″-0.018″ archwire stops (n = 44 per group). Teeth in the anterior dental arch were moved from a neutral to crowded position to replicate anterior crowding of central and lateral incisors. Forces and moments of interest for lateral incisors and first premolars were compared using repeated measures mixed multivariate analysis of variance (α = 0.05)., Results: Three comparisons between straight versus mushroom archwires and two comparisons of coil springs vs. stops were not statistically significant. Overall, it was found that the use of a straight lingual archwire produced larger differences in forces and moments between using stops and coil springs than when using a mushroom archwire. Using stops produced larger forces and moments for both types of archwires as compared to using coil springs. The largest expansion forces were produced using straight archwires with stops, exceeding 3.0 N of force. Straight archwires with coil springs produced the lowest expansion forces on lateral incisors, just exceeding 1.5 N., Conclusions: The findings of this study have elucidated significant differences in the biomechanics of transverse arch expansion using straight or mushroom fixed lingual appliances with coil springs or stops., (© 2023 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Background: Cone beam computed tomography (CBCT) is an imaging modality, which is used routinely in orthodontic diagnosis and treatment planning but delivers much higher radiation than conventional dental radiographs. Ultrasound is a noninvasive imaging method that creates an image without ionizing radiation., Aim: To investigate the reliability of ultrasound and the agreement between ultrasound and CBCT in measuring the alveolar bone level (ABL) on the buccal/labial side of the incisors in adolescent orthodontic patients., Design: One hundred and eighteen incisors from 30 orthodontic adolescent patients were scanned by CBCT with 0.3-mm voxel size and ultrasound at 20 MHz frequency. The ABL, distance from the cementoenamel junction (CEJ) to the alveolar bone crest (ABC), was measured twice to evaluate the agreement between ultrasound and CBCT. In addition, the intra- and inter-rater reliabilities in measuring the ABL by four raters were compared., Results: The mean difference (MD) in the ABL between ultrasound and CBCT was -0.07 mm with 95% limit of agreement (LoA) from -0.47 to 0.32 mm for all teeth. For each jaw, the MDs between the ultrasound and CBCT were -0.18 mm (for mandible with 95% LoA from -0.53 to 0.18 mm) and 0.03 mm (for maxilla with 95% LoA from -0.28 to 0.35 mm). In comparison, ultrasound had higher intra-rater (ICC = 0.83-0.90) and inter-rater reliabilities (ICC = 0.97) in ABL measurement than CBCT (ICC = 0.56-0.78 for intra-rater and ICC = 0.69 for inter-rater reliabilities)., Conclusion: CBCT parameters used in orthodontic diagnosis and treatment planning in adolescents may not be a reliable tool to assess the ABL for the mandibular incisors. On the contrary, ultrasound imaging, an ionizing radiation-free, inexpensive, and portable diagnostic tool, has potential to be a reliable diagnostic tool in assessing the ABL in adolescent patients., (© 2023 The Authors. International Journal of Paediatric Dentistry published by BSPD, IAPD and John Wiley & Sons Ltd.)

Objective: Alveolar crestal bone thickness and level provide important diagnostic and prognostic information for orthodontic treatment, periodontal disease management and dental implants. Ionizing radiation-free ultrasound has emerged as a promising clinical tool in imaging oral tissues. However, the ultrasound image is distorted when the wave speed of the tissue of interest is different from the mapping speed of the scanner and, therefore, the subsequent dimension measurements are not accurate. This study was aimed at deriving a correction factor that can be applied to the measurements to correct for discrepancy caused by speed variation., Methods: The factor is a function of the speed ratio and the acute angle that the segment of interest makes with the beam axis perpendicular to the transducer. The phantom and cadaver experiments were designed to validate the method., Discussion: The comparisons agree well with absolute errors not more than 4.9%. Dimension measurements on ultrasonographs can be properly corrected by applying the correction factor without recourse to the raw signals., Conclusion: The correction factor has reduced the measurement discrepancy on the acquired ultrasonographs for the tissue whose speed is different from the scanner's mapping speed., Competing Interests: Conflict of interest The authors declare no competing interests., (Copyright © 2023 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

Background: Ultrasonography is a noninvasive, low-cost diagnostic tool widely used in medicine. Recent studies have demonstrated that ultrasound imaging might have the potential to be used intraorally to assess periodontal biomarkers., Objectives: To evaluate the reliability of interlandmark distance measurements on intraoral ultrasound images of the periodontal tissues., Materials and Methods: Sixty-four patients from the graduate periodontics ( n  = 33) and orthodontics ( n  = 31) clinics were recruited. A 20 MHz handheld intraoral ultrasound transducer was used to scan maxillary and mandibular incisors, canines, and premolars. Distances between the alveolar bone crest and cementoenamel junction (ABC-CEJ), gingival thickness (GT), and alveolar bone thickness (ABT) were measured by 3 raters. The intercorrelation coefficient (ICC) and mean absolute deviation (MAD) were calculated among and between the raters. Raters also scored images according to quality., Results: The ICC scores for intrarater reliability were 0.940 (0.932-0.947), 0.953 (0.945-0.961), and 0.859 (0.841-0.876) for ABC-CEJ, GT, and ABT, respectively. The intrarater MAD values were 0.023 (±0.019) mm, 0.014 (±0.005) mm, and 0.005 (±0.003) mm, respectively. The ICC scores for interrater reliability were 0.872 (95% CI: 0.836-0.901), 0.958 (95% CI: 0.946-0.968), and 0.836 (95% CI: 0.789-0.873) for ABC-CEJ, GT, and ABT, respectively. The interrater MAD values were 0.063 (±0.029) mm, 0.023 (±0.018) mm, and 0.027 (±0.012) mm, respectively., Conclusions: The present study showed the high reliability of ultrasound in both intrarater and interrater assessments. Results suggest there might be a potential use of intraoral ultrasound to assess periodontium., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2023 Carlos Alberto Figueredo et al.)

The primary objective of this work was to investigate the effect of material selection and tooth position on orthodontic aligner biomechanics. Additionally, material property changes with thermoforming were studied to elucidate its role in material performance in-vitro. An orthodontic simulator (OSIM) was used to evaluate forces and moments at 0.20 mm of lingual displacement for central incisor, canine and second premolar using Polyethylene terephthalate (PET), Polyurethane (PU) and Glycol-modified polyethylene terephthalate (PET-G) materials. The OSIM was scanned to generate a model used to fabricate aligners using manufacturer-specified thermoforming procedures. Repeated measures of MANOVA was used to analyze the effect of teeth and material on forces/moments. The role of thermoforming was evaluated by flexural modulus estimated by 3-point bend tests. Pre-thermoformed and post-thermoformed samples were prepared using as-received sheets and those thermoformed over a simplified arch using rectangular geometry, respectively. Groups were compared using Two-way ANOVA. The PET, PU, and PET-G materials exerted maximum buccal force and corresponding moments on the canine. PU exerted more buccal force than PET-G on the canine and second premolar, and more than PET on the second premolar. The impact of thermoforming varied according to the specific polymer: PET-G remained stable, there was a slight change for PET, and a significant increase was noted for PU from pre-thermoformed to post-thermoforming. The results of this study elucidate the influence of material and arch position on the exerted forces and moments. Further, the mechanical properties of thermoplastic materials should be evaluated after thermoforming to characterize their properties for clinical application., (© 2022 Wiley Periodicals LLC.)

Objectives: Temporomandibular joint (TMJ) internal derangements (ID) represent the most prevalent temporomandibular joint disorder (TMD) in the population and its diagnosis typically relies on magnetic resonance imaging (MRI). TMJ articular discs in MRIs usually suffer from low resolution and contrast, and it is difficult to identify them. In this study, we applied two convolutional neural networks (CNN) to delineate mandibular condyle, articular eminence, and TMJ disc in MRI images., Methods: The models were trained on MRI images from 100 patients and validated on images from 40 patients using 2D slices and 3D volume as input, respectively. Data augmentation and five-fold cross-validation scheme were applied to further regularize the models. The accuracy of the models was then compared with four raters having different expertise in reading TMJ-MRI images to evaluate the performance of the models., Results: Both models performed well in segmenting the three anatomical structures. A Dice coefficient of about 0.7 for the articular disc, more than 0.9 for the mandibular condyle, and Hausdorff distance of about 2mm for the articular eminence were achieved in both models. The models reached near-expert performance for the segmentation of TMJ articular disc and performed close to the expert in the segmentation of mandibular condyle and articular eminence. They also surpassed non-experts in segmenting the three anatomical structures., Conclusion: This study demonstrated that CNN-based segmentation models can be a reliable tool to assist clinicians identifying key anatomy on TMJ-MRIs. The approach also paves the way for automatic diagnosis of TMD., Clinical Significance: Accurately locating the articular disc is the hardest and most crucial step in the interpretation of TMJ-MRIs and consequently in the diagnosis of TMJ-ID. Automated software that assists in locating the articular disc and its surrounding structures would improve the reliability of TMJ-MRI interpretation, save time and assist in reader training. It will also serve as a foundation for additional automated analysis of pathology in TMJ structures to aid in TMD diagnosis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The periodontal ligament (PDL) provides support, proprioception, nutrition, and protection within the tooth-PDL-bone complex (TPBC). While understanding the mechanical behavior of the PDL is critical, current research has inferred PDL mechanics from finite element models, from experimental measures on complete TPBCs, or through direct measurement of isolated PDL sections. Here, transducers are used in an attempt to quantify ex vivo PDL strain. In-fiber Bragg grating (FBG) sensors are small flexible sensors that can be placed within an intact TPBC and yield repeatable strain measurements from within the PDL space. The objective of this study was to determine: 1) if the FBG strain measured from the PDL space of intact swine premolars ex vivo was equivalent to physical PDL strains estimated through finite element analysis and 2) if a change in FBG strain could be linearly related to a change in finite element strain under variable tooth displacement, applied to an intact swine TPBC. Experimentally, individual TPBCs were subjected to 2 displacements ( n = 14). The location of the FBG was determined from representative micro-computed tomography images. From a linear elastic finite element model of a TPBC, the strain magnitudes at the sensor locations were recorded. An experimental ratio (i.e., FBG strain at the first displacement divided by the FBG strain at the second displacement) and a finite element ratio (i.e., finite element strain at the first displacement divided by the finite element strain at the second displacement) were calculated. A linear regression model indicated a statistically significant relationship between the experimental and finite element ratio ( P = 0.017) with a correlation coefficient ( R 2 ) of 0.448. It was concluded that the FBG sensor could be used as a measure for a change in strain and thus could be implemented in applications where the mechanical properties of an intact PDL are monitored over time.

Objectives: To evaluate the association between maxillary incisor root inclinations and unilateral canine impaction., Methods: A retrospective cross-sectional study of 59 pre-treatment CBCT scans (23 palatal impactions, 10 buccal impactions, and 26 comparison patients). Using Dolphin 3-D Imaging software (Chatsworth, CA), relative incisor angulations to a 3D palatal plane and the shortest distance between the canine crown and the root of the closest lateral incisor were calculated. A one-way analysis of variance was used to determine whether there were any differences between the three independent groups of impactions concerning the four continuous dependent variables incisor root inclination for each maxillary incisor., Results: Patients with unilaterally impacted maxillary canines demonstrate significant differences in the root inclination position on the ipsilateral (0.0001 &gt; P = 0.002) but not contralateral side. While palatal impactions (PIC) are associated with buccally positioned roots of the ipsilateral lateral (-9.05 degrees) and central incisors (-7.91 degrees), buccal impactions (BIC) are only associated with palatally positioned roots of the ipsilateral lateral incisors (+10.40 degrees) alone. A more labial position of the lateral incisor root was correlated with a more proximally located, coronally positioned, and medially displaced adjacent PIC (0.013 &gt; P &lt; 0.026)., Limitations: This is a retrospective cross-sectional convenience sample., Conclusions: Patients with impacted maxillary canines, whether PIC or BIC, do not show generalized retroclination or proclination of all four maxillary incisor roots. Instead, changes in incisor root inclination were only ipsilateral to the impacted canine. BIC is only associated with palatal displacement of the ipsilateral lateral incisor root, whereas PIC is associated with labial root displacement of both ipsilateral incisors., (© The Author(s) 2021. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Study Objectives: To evaluate facial 3-dimensional (3D) stereophotogrammetry's effectiveness as a screening tool for pediatric obstructive sleep apnea (OSA) when used by dental specialists., Methods: One hundred forty-four participants aged 2-17 years, including children fully diagnosed with pediatric OSA through nocturnal polysomnography or at high-risk or low-risk of pediatric OSA, participated in this study. 3D stereophotogrammetry, Craniofacial Index, and Pediatric Sleep Questionnaire were obtained from all participants. Ten dental specialists with interest in pediatric sleep breathing disorders classified OSA severity twice, once based only on 3D stereophotogrammetry and then based on 3D stereophotogrammetry, Craniofacial Index, and Pediatric Sleep Questionnaire. Intrarater and interrater reliability and diagnostic accuracy of pediatric OSA classification were calculated. A cluster analysis was performed to identify potential homogeneous pediatric OSA groups based on their craniofacial features classified through the Craniofacial Index ., Results: Intrarater and interrater agreement suggested a poor reproducibility when only 3D facial stereophotogrammetry was used and when all tools were assessed simultaneously. Sensitivity and specificity varied among clinicians, indicating a low screening ability for both 3D facial stereophotogrammetry, ranging from 0.36-0.90 and 0.10-0.70 and all tools ranging from 0.53-1.0 and 0.01-0.49, respectively. A high arched palate and reversed or increased overjet contributed to explaining how participating dental clinicians classified pediatric OSA., Conclusions: 3D stereophotogrammetry-based facial analysis does not seem predictive for pediatric OSA screening, alone or combined with the Pediatric Sleep Questionnaire and Craniofacial Index when used by dental specialists interested in sleep-disordered breathing. Some craniofacial traits, more specifically significant sagittal overjet discrepancies and an arched palate, seem to influence participating dental specialists' classification., Citation: Fernandes Fagundes NC, Carlyle T, Dalci O, et al. Use of facial stereophotogrammetry as a screening tool for pediatric obstructive sleep apnea by dental specialists. J Clin Sleep Med . 2022;18(1):57-66., (© 2022 American Academy of Sleep Medicine.)

Introduction: The objective of this study was to evaluate the forces and moments exerted by orthodontic aligners on 3 different displaced maxillary teeth and their adjacent supporting teeth., Methods: An in vitro orthodontic simulator was used to measure the forces and moments of a 0.75-mm thick glycol-modified polyethylene terephthalate material for 3 maxillary teeth: central incisor, canine, and second premolar. Forces and moments were recorded for tested teeth displaced lingually one by one for 0.20 mm. Repeated measures of multivariate analysis of variance was used to assess the outcome., Results: The mean buccolingual force applied on a displaced canine (2.25 ± 0.38 N) was significantly (P <0.001) more than the central incisor (1.49 ± 0.18 N) and second premolar (1.50 ± 0.16 N). The mean moment (that tends to tip the teeth buccally) exerted on a canine (-20.11 ± 5.27 Nmm) was significantly more (P <0.001) than the central incisor (-8.42 ± 1.67 Nmm) and second premolar (-11.45 ± 1.29 Nmm). The forces and moments acting on teeth adjacent to the displaced tooth were clinically significant and acted in opposing directions to those on the displaced tooth., Conclusions: The results of this study highlighted that for the same amount of displacement on a given tooth, the forces and moments imposed by the orthodontic aligner depend on location around the arch. These findings highlight the need to further study aligner mechanics around the dental arch and optimize aligner design to impose desired mechanical loads to avoid detrimental effects during orthodontic tooth movement., (Copyright © 2021 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objective: Our goal was to automatically identify the cementoenamel junction (CEJ) location in ultrasound images using deep convolution neural networks (CNNs)., Methods: Three CNNs were evaluated using 1400 images and data augmentation. The training and validation were performed by an experienced nonclinical rater with 1000 and 200 images, respectively. Four clinical raters with different levels of experience with ultrasound tested the networks using the other 200 images. In addition to the comparison of the best approach with each rater, we also employed the simultaneous truth and performance level estimation (STAPLE) algorithm to estimate a ground truth based on all labelings by four clinical raters. The final CEJ location estimate was obtained by taking the first moment of the posterior probability computed using the STAPLE algorithm. The study also computed the machine learning-measured CEJ-alveolar bone crest distance., Results: Quantitative evaluations of the 200 images showed that the comparison of the best approach with the STAPLE-estimate yielded a mean difference (MD) of 0.26 mm, which is close to the comparison with the most experienced nonclinical rater (MD=0.25 mm) but far better than the comparison with clinical raters (MD=0.27-0.33 mm). The machine learning-measured CEJ-alveolar bone crest distances correlated strongly (R = 0.933, p < 0.001) with the manual clinical labeling and the measurements were in good agreement with the 95% Bland-Altman's lines of agreement between -0.68 and 0.57 mm., Conclusions: The study demonstrated the feasible use of machine learning methodology to localize CEJ in ultrasound images with clinically acceptable accuracy and reliability. Likelihood-weighted ground truth by combining multiple labels by the clinical experts compared favorably with the predictions by the best deep CNN approach., Clinical Significance: Identification of CEJ and its distance from the alveolar bone crest play an important role in the evaluation of periodontal status. Machine learning algorithms can learn from complex features in ultrasound images and have potential to provide a reliable and accurate identification in subsecond. This will greatly assist dental practitioners to provide better point-of-care to patients and enhance the throughput of dental care., (Copyright © 2021. Published by Elsevier Ltd.)

Aim: To demonstrate the feasibility of the 3D ultrasound periodontal tissue reconstruction of the lateral area of a porcine mandible using standard 2D ultrasound equipment and spatial positioning reading sensors., Material and Method: Periodontal 3D reconstructions were performed using a free-hand prototype based on a 2D US scanner and a spatial positioning reading sensor. For automated data processing, deep learning algorithms were implemented and trained using semi-automatically seg-mented images by highly specialized imaging professionals., Results: US probe movement analysis showed that non-parallel 2D frames were acquired during the scanning procedure. Comparing 3 different 3D periodontal reconstructions of the same porcine mandible, the accuracy ranged between 0.179 mm and 0.235 mm., Conclusion: The present study demonstrated the diagnostic potential of 3D reconstruction using a free-hand 2D US scanner with spatial positioning readings. The use of auto-mated data processing with deep learning algorithms makes the process practical in the clinical environment for assessment of periodontal soft tissues.

The Periodontal Ligament (PDL) is a complex connective tissue that anchors a tooth to the surrounding alveolar bone. The small size and complex geometry of the PDL space within an intact tooth-PDL-bone complex (TPBC) limits strain measurements. An in-fiber Bragg grating (FBG) sensor offers potential for such measurements due to its small size. This work defines an experimental procedure where strain and force were measured during quasi-static, apically directed, displacement-controlled tests on swine premolar crowns. Specifically, the: inter-TPBC, intra-TPBC, and long-term repeatability after a preconditioned state was objectively identified; sensitivity to preload magnitude, TPBC alignment, and sensor depth; and reproducibility within a TPBC was determined. Data clustering was used to determine the appropriate number of preconditioning trials, ranging from one to seven. Strain and force measurements showed intra-TPBC repeatability with average adjusted root mean square from the median of 28.9% of the peak strain and 4.5% of the peak force measurement. A Mann-Whitney U test generally found statistically significant differences in peak strain and force measurements between the left and right sides, suggesting a lack of inter-TPBC repeatability. Using a Friedman test, it was shown that peak strain measures were sensitive to the TPBC alignment and sensor depth, while peak force measures were sensitive to the preload and TPBC alignment. A Friedman test suggested reproducible strain and force measurements when the FBG was replaced within the same TPBC and the preload, alignment, and sensor depth were controlled., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Background: In this meta-epidemiological study, we aimed to examine associations between treatment effect size estimates and sponsorship bias in oral health randomized clinical trials., Methods: We selected oral health related meta-analyses that included a minimum of five randomized controlled trials. We extracted data, in duplicate, related to influence of sponsorship bias. We quantified the extent of bias associated with influence of sponsorship on the magnitude of effect size estimates of continuous variables using a two-level meta-meta-analytic approach with random-effects models to allow for intra- and inter-meta-analysis heterogeneity., Results: We initially identified 540 randomized trials included in 64 meta-analyses. Risk of sponsorship bias was judged as being "unclear" in 72.8% (n = 393) of the trials, while it was assessed as "low" in 16.7% (n = 90) and as "high" in 10.6% (n = 57) of the trials. Using a meta-epidemiological analysis (37 meta-analyses, including 328 trials that analyzed 85,934 patients), we identified statistically significant larger treatment effect size estimates in trials that had "high or unclear" risk of sponsorship bias (difference in treatment effect size estimates=0.10; 95% confidence intervals: 0.02 to 0.19) than in trials that had "low" risk of sponsorship bias., Conclusions: We identified significant differences in treatment effect size estimates between dental trials based on sponsorship bias. Treatment effect size estimates were 0.10 larger in trials with "high or unclear" risk of sponsorship bias., Practical Implications: Clinicians should have an adequate knowledge of sponsorship bias in a clinical trial and be able to estimate the degree to which the conclusions of a systematic review are synthesized and interpreted, based on trials with low risk of sponsorship bias., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Objective: The aim of this study was to develop and validate a technique for mandibular condyle segmentation and volume determination by using cone beam computed tomography (CBCT)., Study Design: A dry skull was used to generate 3 dimensional (3-D)-printed mandible models that were then imaged by using CBCT. Semiautomatic segmentation of condyles was completed. The Frankfurt plane was established and translated to the most inferior point of the sigmoid notch, and the condylar volume superior to the plane was determined. This procedure was repeated on 3-D-printed mandibles by using physical landmarks and the water displacement method to obtain the physical volume. This was repeated 3 times to evaluate reliability. Sensitivity analysis was performed to demonstrate the effect of discrepancies in locating landmarks in the Frankfurt plane. Condylar volume measurements obtained from CBCT were compared with physical measurements through repeated-measures analysis of variance (ANOVA) to determine accuracy., Results: Condylar volume obtained from CBCT and physical measurements resulted in an intraclass correlation coefficient of 0.988 (0.918, 0.998) (P < .01) with both modalities, demonstrating excellent intrarater reliability. The mean difference of volume measurements between the modalities was not statistically significant (P = .365). Potential discrepancies in porion coordinates had minimal impact on condylar volume change., Conclusions: The condylar segmentation technique proved to be a reliable and accurate method for evaluating condylar volume., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Orthodontic archwire rotation around its long axis, known as third-order torque, is utilised to correct tooth rotational misalignments moving the tooth root closer to or away from the cheek through engagement with an orthodontic bracket. Studying the behaviour of archwire and brackets during an applied rotation can aid in better understanding and appreciating the mechanics of third-order torque, potentially allowing for more effective orthodontic treatment protocols. Mechanically characterising archwire behaviour during third-order torque application is a complex task due to their physical scale and geometries. An advanced measurement technique was needed to address these constraints. A three-dimensional (3D) non-contact optical method using a digital image correlation (DIC) system was developed. An orthodontic torque simulator (OTS) was used to apply and measure third-order torque with 0.483 × 0.635 mm (0.019″ x 0.025″) rectangular archwires in tandem with a 3D DIC system, whereby surface deformations and strains could be computed using correlation algorithms. The 3D DIC system was implemented to enable third-order torque experimentation with the OTS while imaging the archwire and bracket surfaces. The 3D DIC system's ability to measure 3D archwire deformations and strains was verified using a finite element model, where comparisons between 3D DIC measurements and calculated results from the model were made to ensure the measurement capabilities of 3D DIC in the context of third-order torque. The 3D DIC system was then used to compare archwire behaviour between stainless steel (SS) and titanium molybdenum alloy (TMA) archwires to study potential clinical differences in archwire behaviour, in which the archwires were rotated with a custom SS rigid dowel (RD) as well as commercial Damon Q orthodontic brackets. The quantification of third-order torque and archwire deformations and strains led to the conclusion that SS archwires led to larger torque magnitudes compared to TMA archwires. The RD resulted in larger archwire strains compared to Damon Q brackets. The 3D DIC system provides a non-contact measurement technique that can further be used with third-order torque experimentation with the OTS., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Periodontal diseases could be diagnosed through intraoral ultrasound imaging with the advantages of simple operation procedures, low cost, and low safety risks. A couplant is normally placed between transducers and tissues for better ultrasound image quality. If applied intraorally, the couplants should possess good stability in water and robust mechanical properties, as well as strong adhesiveness to transducers and tissues. However, commercial couplants, such as Aquaflex (AF) cannot fulfill these requirements. In this work, inspired by the mussel adhesion mechanism, we reported a poly(vinyl alcohol)-polyacrylamide-polydopamine (PVA-PAM-PDA) hydrogel synthesized by incorporating PDA into the PAM-PVA double-network for intraoral ultrasound imaging. The hydrogel maintains good stability in water as well as exceptional mechanical properties and can adhere to different substrates (i.e., metal, glass, and porcine skin) without losing the original adhesion strength after multiple adhesion-strip cycles. Besides, when applied to porcine mandibular incisor imaging, the PVA-PAM-PDA hydrogel possesses good image quality for diagnosis as AF does. This work provides practical insights into the fabrication of multifunctional hydrogel-based interfaces between human tissues and medical devices for disease diagnosis applications.

Hypothesis: Intraoral ultrasound is a safer and economical approach to image dento-periodontal tissues and diagnose periodontal diseases compared with X-ray. A gel pad is often used as a couplant between the transducer and oral tissue to delay the ultrasound signals for better identification. However, the current commercial couplant, such as Aquaflex gel pad (AF), face many challenges, including low stability in water, poor mechanical properties, low coefficient of friction, and potential cytotoxicity issues. Polyacrylamide/sodium alginate (PAM/Alginate) double-network (DN) tough hydrogel could address these issues as the potential couplant for intraoral ultrasound imaging., Experiments: Different critical properties required for intraoral ultrasound imaging, including stability in water, mechanical properties, frictional properties, ultrasound properties and biocompatibility of PAM/Alginate DN tough hydrogels were evaluated and compared with those of AF., Findings: The PAM/Alginate DN hydrogel not only possesses better stability in water as well as improved mechanical properties and higher coefficients of friction than AF but also can provide similar ultrasound image quality as AF does. Moreover, the PAM/Alginate DN hydrogel shows lower cytotoxicity to both cancer (Hela) and fibroblast cells (MRC-5). With all these significant features, such tough hydrogels serve as a proof-of-concept ultrasound couplant with great potential in intraoral ultrasound imaging., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

The purpose of this study was to evaluate and compare dental and skeletal changes associated with the Damon and Rapid Maxillary Expander (RME) expansion using Cone-Beam Computed Tomography (CBCT). Eighty-two patients, from The University of Alberta Orthodontic Clinic, were randomly allocated to either Group A or B. Patients in Group A received orthodontic treatment using the Damon brackets. Patients in Group B received treatment using the Hyrax (a type of RME) appliance. CBCT images were taken two times (baseline and after expansion). The AVIZO software was used to locate 18 landmarks (dental and skeletal) on sagittal, axial, and coronal slices of CBCT images. Comparison between two groups showed that transverse movement of maxillary first molars and premolars was much greater in the Hyrax group. The lateral movements of posterior teeth were associated with buccal tipping of crowns. No clinically significant difference in the vertical or anteroposterior direction between the two groups was noted. Alveolar bone next to root apex of maxillary first premolar and molar teeth showed clinically significant lateral movement in the Hyrax group only. The comparison between two groups showed significantly greater transverse expansion of the first molar and first premolars with buccal tipping in the RME group.

Objective: To compare the biomechanics of straight labial, straight lingual, and mushroom lingual archwire systems when used in posterior arch expansion., Materials and Methods: An electro-mechanical orthodontic simulator allowing for buccal-lingual and vertical displacements of individual teeth and three-dimensional force/moment measurements was instrumented with anatomically shaped teeth for the maxillary arch. In-Ovation L brackets were bonded to lingual surfaces, and Carriere SLX brackets were bonded to labial surfaces to ensure consistency of slot dimensions. Titanium molybdenum archwires were bent to an ideal arch form, and the teeth on the orthodontic simulator were set to a passive position. Posterior teeth from the canine to second molar were moved lingually to replicate a constricted arch. From the constricted position, the posterior teeth were simultaneously moved until the expansive force decreased below 0.2 N. Initial force/moment systems and the amount of predicted expansion were compared for posterior teeth at a significance level of α = 0.05., Results: Archwire type affected both the expected expansion and initial force/moment systems produced in the constricted position. In general, the lingual systems produced the most expansion. The archwire systems were not able to return the teeth to their ideal position, with the closest system reaching 41% of the intended expansion., Conclusions: In general, lingual systems were able to produce greater expansion in the posterior regions when compared with labial systems. However, less than half of the intended arch expansion was achieved with all systems tested., (© 2020 by The EH Angle Education and Research Foundation, Inc.)