Search

Electro-chemo-mechanical (ECM) coupling refers to mechanical deformation due to electrochemically driven compositional change in a solid. An ECM actuator producing micrometre-size displacements and long-term stability at room temperature was recently reported, comprising a 20 mol% Gd-doped ceria (20GDC), a solid electrolyte membrane, placed between two working bodies made of TiOx/20GDC (Ti-GDC) nanocomposites with Ti concentration of 38 mol%. The volumetric changes originating from oxidation or reduction in the local TiOx units are hypothesized to be the origin of mechanical deformation in the ECM actuator. Studying the Ti concentration-dependent structural changes in the Ti-GDC nanocomposites is therefore required for (i) understanding the mechanism of dimensional changes in the ECM actuator and (ii) maximizing the ECM response. Here, the systematic investigation of the local structure of the Ti and Ce ions in Ti-GDC over a broad range of Ti concentrations using synchrotron X-ray absorption spectroscopy and X-ray diffraction is reported. The main finding is that, depending on the Ti concentration, Ti atoms either form a cerium titanate or segregate into a TiO2 anatase-like phase. The transition region between these two regimes with Ti(IV) concentration between 19% and 57% contained strongly disordered TiOx units dispersed in 20GDC containing Ce(III) and Ce(IV) and hence rich with oxygen vacancies. As a result, this transition region is proposed to be the most advantageous for developing ECM-active materials. [ABSTRACT FROM AUTHOR]

Point defects such as oxygen vacancies and protonic interstitials are not only essential for ionic conductivity in oxides since they also affect the mechanical and electromechanical properties. These properties of nominally dry and hydrated proton‐conducting BaZr0.85M0.15O2.925+δH2δ (M = Al, Ga, Sc, In, Y, Eu) ceramics are investigated. Doping decreases Young's modulus with increasing ionic radii difference between the dopant and the host. Nominally dry samples show consistently higher Young's moduli than hydrated samples. All samples exhibit large non‐classical electrostriction, with a negative electrostriction coefficient M33<0. M33 shows saturation with the field and a non‐ideal Debye relaxation with frequency. The low‐frequency M33 value for both dry and hydrated samples shows a similar dependence on dopant radius as Young's modulus. For the hydrated samples, the relaxation frequency increases by a factor >100 in the series Ga‐Y, emphasizing the importance of proton trapping, with Y‐doped samples having minimal trapping energy. This coincides with the fact that the saturation strain for Y‐doped samples is also the smallest. In light of these findings, it is concluded that the present data give strong evidence for the existence of defect‐related elastic dipoles in acceptor doped barium zirconate and that the non‐classical electrostriction originates in their reorientation under electric field. [ABSTRACT FROM AUTHOR]

Dimensional change in a solid due to electrochemically driven compositional change is termed electro‐chemo‐mechanical (ECM) coupling. This effect causes mechanical instability in Li‐ion batteries and solid oxide fuel cells. Nevertheless, it can generate considerable force and deformation, making it attractive for mechanical actuation. Here a Si‐compatible ECM actuator in the form of a 2 mm diameter membrane is demonstrated. Actuation results from oxygen ion transfer between two 0.1 µm thick Ti oxide\Ce0.8Gd0.2O1.9 nanocomposite layers separated by a 1.5 µm thick Ce0.8Gd0.2O1.9 solid electrolyte. The chemical reaction responsible for stress generation is electrochemical oxidation/reduction in the composites. Under ambient conditions, application of 5 V DC produces actuator response within seconds, generating vertical displacement of several µm with calculated stress ≈3.5 MPa. The membrane actuator preserves its final mechanical state for more than 1 h following voltage removal. These characteristics uniquely suit ECM actuators for room temperature applications in Si‐integrated microelectromechanical systems. [ABSTRACT FROM AUTHOR]

Electro-chemo-mechanical (ECM) coupling refers to mechanical deformation due to electrochemically driven compositional change in a solid. An ECM actuator producing micrometre-size displacements and long-term stability at room temperature was recently reported, comprising a 20 mol% Gd-doped ceria (20GDC), a solid electrolyte membrane, placed between two working bodies made of TiO x /20GDC (Ti-GDC) nanocomposites with Ti concentration of 38 mol%. The volumetric changes originating from oxidation or reduction in the local TiO x units are hypothesized to be the origin of mechanical deformation in the ECM actuator. Studying the Ti concentration-dependent structural changes in the Ti-GDC nanocomposites is therefore required for (i) understanding the mechanism of dimensional changes in the ECM actuator and (ii) maximizing the ECM response. Here, the systematic investigation of the local structure of the Ti and Ce ions in Ti-GDC over a broad range of Ti concentrations using synchrotron X-ray absorption spectroscopy and X-ray diffraction is reported. The main finding is that, depending on the Ti concentration, Ti atoms either form a cerium titanate or segregate into a TiO 2 anatase-like phase. The transition region between these two regimes with Ti(IV) concentration between 19% and 57% contained strongly disordered TiO x units dispersed in 20GDC containing Ce(III) and Ce(IV) and hence rich with oxygen vacancies. As a result, this transition region is proposed to be the most advantageous for developing ECM-active materials., (open access.)