Search

Synergistic influence of extrusion conditions and whey protein isolate (WPI) incorporation on glycemic response and physicochemical characteristics of rice starch was studied. Box-Behnken Design was used to evaluate effect of process variables (rice starch:WPI ratio; feed moisture and barrel temperature) on quality characteristics of resistant starch-rich, low GI extruded snacks (RSLG-E). Optimum conditions for development of RSLG-E were WPI:18.30 %, feed moisture:20 % and barrel temperature:120 °C. FTIR spectroscopy showed maximum peaks at 1615 cm -1 and 1540 cm -1 corresponding to presence of amide group; however, such band was absent in control. Thermal analysis indicated significantly higher transition temperatures in RSLG-E than control. Expansion ratio (3.79 ± 0.17) and overall acceptability (4.48 ± 0.05) were found to be significantly lower in RSLG-E. In vitro digestibility indicated significantly lower very rapidly digestible starch (2.08 ± 0.03 %) and rapidly digestible starch (68.49 ± 1.07 %) in RSLG-E than control. Digestible starch (86.85 ± 0.97 %), starch hydrolysis rate (58.72 ± 0.97 %) and slowly digestible starch (72.61 ± 0.82 %) were lower in control., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.) more...

In today's food industry, optimizing the recovery of high-value compounds is crucial for enhancing quality and yield. Multivariate methods like Response Surface Methodology (RSM) and Artificial Neural Networks (ANNs) play key roles in achieving this. This review compares their technical strengths and examines their sustainability impacts, highlighting how these methods support greener food processing by optimizing resources and reducing waste. RSM is valued for its structured approach to modeling complex processes, while ANNs excel in handling nonlinear relationships and large datasets. Combining RSM and ANNs offers a powerful, synergistic approach to improving predictive models, helping to preserve nutrients and extend shelf life. The review emphasizes the potential of RSM and ANNs to drive innovation and sustainability in the food industry, with further exploration needed for scalability and integration with emerging technologies. more...

This study aimed at optimizing process protocols for development of low glycemic index (GI) rice flour (LGIRF) by employing enzymatic hydrolysis method using central composite rotatable design (CCRD). LGIRF was evaluated for pasting, farinographic, spectroscopic and microbiological attributes. Independent variables for optimization included concentrations of α-amylase (0.02-0.12 %), glucoamylase (0.02-0.24 %), as well as the incubation temperature (55-80°C). Resistant starch (RS), glycemic index (GI) and glycemic load (GL) were investigated as response variables. The optimum conditions for development of LGIRF with better quality were- α-amylase concentration of 0.040 %, glucoamylase concentration of 0.070 % and an incubation temperature of 60 °C. The results of mineral analysis revealed significantly (p < 0.05) lower levels of boron, potassium, zinc, phosphorus, magnesium, and manganese in LGIRF, while iron and copper were significantly higher. The viscosity profile as evident from pasting profile and farinographic characteristics of LGIRF were significantly (p < 0.05) lower than native rice flour. 1 H NMR and 13 C NMR spectroscopic studies showed an increase in flexible starch segments and a decrease in amorphous portion of starch LGIRF, along with chemical shift alterations in carbons 1 and 4. Free fatty acids and total plate count were significantly (p < 0.05) higher in LGIRF although was within limits., Competing Interests: Declaration of competing interest None of the authors report any conflict of interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.) more...

Pectin yield of 22.22 ± 0.98 % (dry basis) was achieved from prematurely dropped Golden Delicious apples, having a light orange hue (hue value: 78.08 ± 0.04) and an overall color difference (ΔE) of 9.92 ± 0.01 compared to commercial pectin (CP). Extracted AP exhibited a lower equivalent weight (725.24 ± 29.73) and higher methoxy content (8.36 ± 0.28 %) in contrast to CP. However, a similar degree of esterification of 71.57 ± 0.79 and 70.55 ± 0.59 %, was observed in AP and CP respectively. Apple pectin demonstrated slight lower galacturonic acid (GalA) content of 68.10 ± 3.94 % in comparison to 72.31 ± 4.62 % of CP, which was further corroborated by reduced intensity in FTIR fingerprint region (912-1025 cm -1 ). Morphology revealed a sheet-like cloudy appearance indicating a significant presence of associated sugars whereas X-ray diffraction highlighted the highly amorphous nature of AP. AP and CP solutions (3-9 %) displayed a shear-thinning flow and viscoelastic behavior where the loss (G') moduli dominated over the storage moduli (G"). Owing to high degree of esterification, galacturonic acid content (>65 %) that aligns with commercial standards and viscoelastic behavior, the extracted AP holds promise for potential utilization in commercial applications. This study underscores the potential for sustainable utilization of prematurely dropped apples through pectin extraction, contributing to valorization of the wasted bioresource., Competing Interests: Declaration of competing interest All the contributing authors declare no conflict of interest with respect to the submission of research article entitled “Comparative Study on Thermo-Mechanical, Structural and Functional Properties of Pectin Extracted from Immature Wasted Apples and Commercial Pectin” in the International Journal of Biological Macromolecules., (Copyright © 2023 Elsevier B.V. All rights reserved.) more...

Starches were isolated from five oat varieties (SFO-1, SFO-3, Sabzar, SKO-20 and SKO-96) grown in North-Western Himalayas of India. Moisture content of the varieties ranged from 9.25 ± 0.09 to 13.21 ± 0.11 %, indicating their shelf-stability. Results suggested >90 % purity of starches as was evident from values of ash, proteins, and lipids. Amylose content results showed that all starches fall within category of intermediate-amylose starches. Lambda max , blue value and OD 620/550 were found significantly (p ≤ 0.05) higher in SKO-20. Sabzar exhibited higher starch hydrolysis percentage of 85.16 % whereas, lowest was observed in SKO-20 (78.12 %). Degree of syneresis was higher in SKO-20 however, its freeze-thaw stability was lesser. Wide peak in FTIR spectra at 3320 cm -1 confirms nature of starches. SKO-20 exhibited significantly higher onset gelatinization temperature (65.19 ± 1.06 °C) and enthalpy (15.78 ± 0.15 J/g) whereas, Sabzar exhibited lowest enthalpy. Pasting characteristics indicated lowest and highest final viscosity in SKO-20 (341.30 ± 2.11 mPas) and SKO-96 (1470 ± 4.56 mPas), respectively. SEM results indicated irregular and polygonal shape of starches with size <10 μm. SKO-20 exhibited lowest disintegration time of 2.08 ± 0.01 min and Sabzar showed highest (3.31 ± 0.07 min). SKO-20 released more curcumin (71.28 %) whereas, Sabzar released less. This suggests that SKO-20 could be used as better excipient for delivery of curcumin at target site., Competing Interests: Declaration of competing interest No declaration of interest is reported by any author., (Copyright © 2023 Elsevier B.V. All rights reserved.) more...

Almond gum is a natural biopolymer produced by Almond tree that is non-toxic, biodegradable, and biocompatible. These features make it suitable for applications in the food, cosmetic, biomedical, and packaging industries. To ensure its wide application in these fields, green modification process is necessary. Gamma irradiation is often used as a sterilisation and modification technique, due to its high penetration power. Thus, evaluating its effects on the physicochemical and functional properties of gum after exposure is important. To date, limited studies have reported the use of high dose of γ-irradiation on the biopolymer. Therefore, the present study demonstrated the effect of a high dose of γ-irradiation (0, 24, 48, and 72 kGy) on the functional and phytochemical properties of almond gum powder. The irradiated powder was studied for its color, packing, functional, and bioactive properties. The results revealed a significant increase in water absorption capacity, oil absorption capacity, and solubility index. However, a decreasing trend was observed in the foaming index, L value, pH, and emulsion stability with the radiation dose. Besides, sizable effects were observed in the IR spectra of irradiated gum. Phytochemical properties were significantly improved with an increase in dose. The emulsion was prepared from irradiated gum powder, where the highest creaming index was observed at 72 kGy and a decreasing trend in zeta potential. These results suggested that γ-irradiation treatment is a successful method to generate desirable cavity, pore sizes, functional properties, and bioactive compounds. This emerging approach could modify the natural additive with distinct internal structure for specific uses in wide range of food, pharmaceutical and other industrial applications., Competing Interests: Declaration of competing interest Authors declare no conflict of interest with this present submission. All the authors have read and approve the manuscript., (Copyright © 2023 Elsevier B.V. All rights reserved.) more...

Currant tomato (Solanum pimpinellifolium), an underutilized wild species of modern tomato, was investigated to determine the physicochemical properties and understand the effect of cold- and hot-break heat treatments on physicochemical characteristics. Moreover, a new Arrhenius-type equation was used to model the temperature-dependent viscosity of currant tomato pulp and paste. The currant tomato’s porosity, surface area, and lycopene content were 40.96 ± 0.84%, 663.86 ± 65.09 mm2, and 9.79 ± 1.88 mg/100 g, respectively. Cold- and hot-break heat treatments had a significant (p < 0.05) effect on tomato pulp and paste color change (0.09 to 0.26; 0.19 to 1.96), viscosity (0.06 to 0.02 Pa.s; 0.85 to 0.37 Pa.s), and lycopene content (9.70 to 9.07 mg/100 g; 9.60 to 9.37 mg/100 g), respectively. An Arrhenius-type equation described the temperature-dependent viscosity of currant tomato pulp and paste with activation energy (Ea) ranging from 7.54 to 11.72 kJ/mol and 8.62 to 8.97 kJ/mol, respectively. Principal component analysis (PCA) revealed a total of variance 99.93% in tomato pulp and paste as affected by the cold- and hot-break heat treatments. Overall, the findings may provide knowledge for design graders and process optimization to develop currant tomato-based products. more...

The poultry processing industrial wastes are rich sources of gelatin protein, which can be utilized for various industrial sectors. The present investigation was conducted to evaluate the effect of freeze-drying (FD) and hot air drying (HAD) on the physicochemical, structural, thermal, and functional characteristics of chicken feet gelatin. The yield (%) of extracted FD and HAD gelatin was 14.7 and 14.5%, respectively. The gelatin samples showed lower percent transmittance in the UV region. The FTIR bands were at 3,410-3,448 cm -1 , 1,635 cm -1 , 1,527-334 cm -1 , and 1,242-871 cm -1 representing amide-A, amide-I, amide-II, and amide-III bands, respectively. The water activity of HAD was higher (0.43) than in FD (0.21) samples and pH were 5.23 and 5.14 for HAD and FD samples, respectively. The flow index ( n ) of 6.67% gelatin solutions was 0.104 and 0.418 with consistency coefficient ( k ) of 37.94 and 31.68 for HAD and FD samples, respectively. The HAD sample shows higher gel strength (276 g) than the FD samples (251 g). The foaming capacity (FC) and foaming stability (FS) of FD samples were 81 and 79.44% compared to 62 and 71.28% for HAD, respectively. The emulsion capacity and emulsion stability of HAD gelatin were higher at 53.47 and 52.66% than FD gelatin. The water holding capacity (WHC) and oil binding capacity (OBC) of FD were lower, that is, 14.3 and 5.34 mL/g compared to HAD gelatin having 14.54 and 6.2 mL/g WHC and OBC, respectively. Hence, the present study indicated that gelatin samples can be utilized in various food products for enhancing functionality and can be used for developing edible packaging materials., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Rather, Majid, Dar, Amin, Makroo, Mir, Barba and Dar.) more...

Indian gooseberry/Amla (Emblica officinalis Gaertn. syn. Phyllanthus emblica L) has an amazing nutritional profile and is a reservoir of biologically active compounds which have potential health benefits and are regarded as a remedy for lethal diseases. The unique features of amla, conferred by their bioactive components, have extended future prospects about their usage for useful effects on human nutrition and health globally. With the rapidly growing popularity of this unique therapeutic fruit, it is important to have comprehensive knowledge of this fruit. The current review article presents the nutritional profile, bioactive components, antioxidant and antimicrobial properties, and postharvest processing of amla fruit. Moreover, studies related to therapeutic properties of amla and its utilization in development of functional foods have been presented in this review. E. officinalis is a promising source of bioactive compounds which showed varied potential in the management of a number of human ailments which has been proven through various studies. Therefore, amla should be taken in the regular diet, thereby utilizing its potential health benefits. PRACTICAL APPLICATIONS: Amla (Indian gooseberry), as source of natural bioactive compounds, has a great potential application in improving the status of human nutrition and health. The utilization of amla extract has various biological effects, like antimicrobial, antioxidant, gastroprotective, anticancer, hepatoprotective, cardioprotective, radioprotective, anti-inflammatory, antidiabetic, neuroprotective, and immunomodulatory effect, owing to its bioactive components. The use of amla extract has recently increased in food, pharmaceutical, and cosmetic products to replace synthetic antioxidants which have inherent harmful health effects. The review report will provide information on bioactive components, therapeutic properties, utilization of amla in the development of future functional foods, and postharvest processing of amla, which will provide critical information to researchers all over the world., (© 2022 Wiley Periodicals LLC.) more...

This study investigated physicochemical, glycemic index, pasting and microstructural properties of low glycemic index rice flour (LGIRF) stored in two different packaging materials (low density polyethylene-LDPE and metalized polyester-Met-PE) under accelerated storage conditions (38 ± 2 °C and 90-92% RH) for three months. The different properties were evaluated after every one month. Protein, fat, fibre and carbohydrate content decreased slightly while, water activity, moisture and ash of both control and LGIRF increased significantly with storage (P < 0.05). Total starch, in vitro glycemic index and glycemic load were higher in control and decreased during storage (P < 0.05). However, resistant starch, total sugars, reducing sugars and degree of sweetness in LGIRF exhibited higher, although non-significant variation relative to control during storage. Pasting properties revealed that peak and breakdown viscosities decreased while final and setback viscosities increased during storage (P < 0.05) however holding viscosity and pasting temperature exhibited non-significant variation (P > 0.05). Further, all pasting properties were significantly higher in control except pasting temperature (P < 0.05). All farinographic properties exhibited non-significant difference during storage and were significantly higher in control. Overall, while comparing LDPE and MeT-PE samples non-significant variation was observed in all properties. Microstructural studies showed that integrity of starch granules in LGIRF samples were least altered during storage., (Copyright © 2020 Elsevier B.V. All rights reserved.) more...

Die filling is a critical process step in pharmaceutical tablet manufacturing. Mass and content uniformity of the tablets as well as production throughput depend upon the die filling performance of the formulations. The efficiency of the die filling process is influenced by powder properties, such as flowability, cohesion, particle size and morphology, as well as the process conditions. It is hence important to understand the influence of powder properties on the die filling performance. The purpose of the present study is to identify the critical material attributes that determine the efficiency of die filling. For this purpose, a model rotary die filling system was developed to mimic the die filling process in a typical rotary tablet press. The system consists of a round die table of 500 mm diameter, equipped with a rectangular die. The die table can rotate at an equivalent translational velocity of up to 1.5 m/s. The filling occurs when the die passes through a stationary shoe positioned above the die table. Using this system, die filling behaviours of 7 commonly used pharmaceutical excipients with various material characteristics (e.g. particle size distribution, sphericity and morphology) and flow properties were examined. The efficiency of die filling is evaluated using the concept of critical filling velocity. It was found that the critical filling velocity is strongly dependent on such properties as cohesion, flowability, average particle size and air sensitivity index. In particular, the critical filling velocity increases proportionally as the mean particle size, flow function, air permeability and air sensitivity index increase, while it decreases with the increase of specific energy and cohesion., (Copyright © 2018 Elsevier B.V. All rights reserved.) more...

A study was carried out to relate the hydration behaviour with processing conditions of low amylose content parboiled rice which was dried at various temperatures (40, 50 and 60 °C). The rehydration characteristics of the parboiled rice (dehusked only) was then studied at various soaking temperatures (30, 40 and 50 °C) and time ( upto 3 h at every 30 min interval) and equilibrium moisture content of rehydration (EMC) was determined. The data were tested on three hydration equations viz., Peleg's, Exponential and Weibull equations. The experimental data were used to determine the model parameters. The goodness of fit for the models were evaluated by coefficient of determination (R(2)) and sum of square error (SSE). The results were indicated that the Weibull model fits better than the exponential model and Peleg's equation. Also, water transfer to paddy, was described by applying the Fick's diffusion model and the moisture diffusivity (D) was calculated. The Diffusivity values varied between 1.06 and 4 × 10(-11) m(2)/s. more...