Search

Abstract In this paper, the formation of laser‐induced periodic surface structures (LIPSS) on atomic‐layer deposited MoS2 layers are studied experimentally. The process parameters (laser fluence and the pulse overlap) corresponding to formation of low‐ and high‐spatial frequency LIPSS as well as ablation and modification of the layers are identified for different pulse durations in the range from 0.2 to 10 ps. The role of the temperature accumulation is evaluated by changing the repetition rate from 0.2 to 2 MHz. The negative accumulation effect, i.e., the ablation of the layers becomes more difficult at higher laser pulse overlaps, is also observed. A simple model explaining the transition between different types of the LIPSS and the decrease of the ablation efficiency with the pulse overlap is suggested.

The formation of laser-induced periodic surface structures (LIPSSs) on the atomic layer-deposited (ALD) molybdenum disulfide (MoS2) upon femtosecond laser processing is studied experimentally. Laser-processing parameters such as average laser power and the scan speed at which the formation of the periodic nanostructures takes place are identified. Optical and scanning electron microscopy are applied to identify the parameter regions for the different LIPSS formations and transitions between them. High- and low-spatial frequency LIPSS (HSFL and LSFL) with two distinct periods λLSFL ≈ 1.1 μm and λHSFL ≈ 83 nm can be observed. The HSFL are dominating at higher and the LSFL at lower laser average powers. Formation of LIPSS is found to inhibit laser ablation at lower scan speeds.