Search

In this work, we report macroscopic electromagnetic devices made from conducting polymers. We compare their fundamental properties and device parameters with those of similar devices made from copper wires. By using self-standing supra-ampere conducting polymer wires, we are able to manufacture inductors that generate magnetic fields well over 1 G, and incorporate them in feedback LC oscillators operating at 8.65 MHz. Moreover, by utilizing the unique electrochemical functionality of conducting polymers, we demonstrate electrochemically-tunable electromagnets and electromagnetic chemical sensors. Our findings pave the way to lightweight electromagnetic technologies that can be processed (from water dispersions) using low-temperature protocols into flexible shapes and geometries. [ABSTRACT FROM AUTHOR]

Organic transistors that use polyelectrolytes as gate insulators can be driven at very low voltages (<1 V). The low operating voltage is possible thanks to the formation of electric double layers upon polarization, which generates large electric fields at the critical interfaces in the device structure. In this work, we use a semiconducting blend (of a high electron affinity polymer and a low ionization potential one) in conjunction with a solid polyelectrolyte insulator to fabricate low-voltage ambipolar organic transistors. For both n- and p-channel operation, we use a polycation with readily mobile-yet large enough to limit bulk doping of the semiconductor-counterions. [ABSTRACT FROM AUTHOR]

Complementary circuits, processing digital signals, are a cornerstone of modern electronics. Such circuits require both p- and n-type transistors. Polyelectrolytes are used as gate insulators in organic thin film transistors (OTFTs) to establish an electric double layer capacitor upon gate bias that allows low operational voltages (<1 V). However, stable and low-voltage operating n-channel organic transistors have proven difficult to construct. Here, we report ultra-low voltage n-channel organic polymer-based transistors that are stable in ambient atmosphere. Our n-type OTFTs exhibit on/off ratios around 103 for an applied drain potential as low as 0.1 V. Since small ions are known to promote electrochemical reactions within the semiconductor's channel bulk and typically slow down the transistor, we use a solid polycationic gate insulator that suppresses penetration of anions into the n-channel semiconductor. As a result, our n-channel OTFTs switch on in under 5 ms and off in less than 1 ms. [ABSTRACT FROM AUTHOR]

Thermoelectric generators (TEGs) transform a heat flow into electricity. Thermoelectric materials are being investigated for electricity production from waste heat (co-generation) and natural heat sources. For temperatures below 200 °C, the best commercially available inorganic semiconductors are bismuth telluride (Bi2Te3)-based alloys, which possess a figure of merit ZT close to one. Most of the recently discovered thermoelectric materials with ZT>2 exhibit one common property, namely their low lattice thermal conductivities. Nevertheless, a high ZT value is not enough to create a viable technology platform for energy harvesting. To generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs. This requires thermoelectric materials that are readily synthesized, air stable, environmentally friendly and solution processable to create patterns on large areas. Here we show that conducting polymers might be capable of meeting these demands. The accurate control of the oxidation level in poly(3,4-ethylenedioxythiophene) (PEDOT) combined with its low intrinsic thermal conductivity (λ=0.37 W m−1 K−1) yields a ZT=0.25 at room temperature that approaches the values required for efficient devices. [ABSTRACT FROM AUTHOR]

This study presents a novel, green, and efficient way of preparing crosslinked aerogels from cellulose nanofibers (CNFs) and alginate using non‐covalent chemistry. This new process can ultimately facilitate the fast, continuous, and large‐scale production of porous, light‐weight materials as it does not require freeze‐drying, supercritical CO2 drying, or any environmentally harmful crosslinking chemistries. The reported preparation procedure relies solely on the successive freezing, solvent‐exchange, and ambient drying of composite CNF‐alginate gels. The presented findings suggest that a highly‐porous structure can be preserved throughout the process by simply controlling the ionic strength of the gel. Aerogels with tunable densities (23–38 kg m−3) and compressive moduli (97–275 kPa) can be prepared by using different CNF concentrations. These low‐density networks have a unique combination of formability (using molding or 3D‐printing) and wet‐stability (when ion exchanged to calcium ions). To demonstrate their use in advanced wet applications, the printed aerogels are functionalized with very high loadings of conducting poly(3,4‐ethylenedioxythiophene):tosylate (PEDOT:TOS) polymer by using a novel in situ polymerization approach. In‐depth material characterization reveals that these aerogels have the potential to be used in not only energy storage applications (specific capacitance of 78 F g−1), but also as mechanical‐strain and humidity sensors. [ABSTRACT FROM AUTHOR]