Search

Inadequate blood supply to the intestine can lead to acute mesenteric ischemia (AMI), with a mortality rate ranging from 60% to 90%. This high mortality rate is partially due to late detection and the lack of efficient early diagnostic tests. There is an urgent need for a point-of-care tool for immediate bedside diagnosis. Here we present for the first time a rapid and non-invasive electrochemical biosensor device based on non-faradic impedance spectroscopy to detect intestinal fatty-acid binding protein (I-FABP) as an indication of AMI. The electrochemical biosensors consist of gold interdigitated electrodes that were fabricated using photolithographic techniques on top of silicon dioxide substrates. The electrode surfaces were functionalized with an I-FABP capture antibody (CAnB) to entice the target protein, while gold nanoparticles (GNPs) functionalized with detection antibodies (DAnB-GNPs) were utilized as a novel mechanism to enhance the detection signal. Quantification of the I-FABP concentration in the medium depended on its attachment to CAnB and DAnB-GNPs in a sandwich manner, where the latter boosts the impedance signal through its binding to the I-FABP. This non-invasive non-faradic electric biosensor device demonstrates the potential for bench-to-bedside translation with the goal of decreasing morbidity and mortality from AMI.

Developing a real-time, portable, and inexpensive sensor for pathogenic bacteria is crucial since the conventional detection approaches such as enzyme-linked immunosorbent assay (ELISA) and polymerase chain reaction (PCR) assays are high cost, time-consuming, and require an expert operator. Here we present a portable, inexpensive, and convenient impedance-based biosensor using Interdigitated Electrode (IDE) arrays to detect Escherichia coli (E. coli) as a model to demonstrate the feasibility of an impedance-based biosensor. We manipulated the affinity of the IDE array towards E. coli (E. coli BL21 series) by functionalizing the IDEs’ surface with an E. coli outer membrane protein (OMP) Ag1 Aptamer. To determine the dominant factors affecting the sensitivity and the performance of the biosensor in detecting E. coli, we investigated the roles of the substrate material used in the fabrication of the IDE, the concentration of the aptamer, and the composition of the carboxy aliphatic thiol mixture used in the pre-treatment of the IDE surface. In the sensing experiments we used an E. coli concentration range of 25–1000 cfu mL−1 and confirmed the binding of the OMP Ag1 Aptamer to the outer membrane protein of the E. coli by Field Emission Scanning Electron Microscopy (FESEM), Optical Microscopy, and Atomic Force Microscopy (AFM). By tuning the surface chemistry, the IDEs’ substrate material, and the concentration of the OMP Ag1 Aptamer, our sensor could detect E. coli with the analytical sensitivity of approximately 1.8 Ohm/cfu and limit of detection of 9 cfu mL−1. We found that the molecular composition of the self-assembled monolayer (SAM) formed on the top of the IDEs before the attachment of the OMP Ag1 Aptamer significantly impacted the sensitivity of the sensor. Notably, with straightforward changes to the molecular recognition elements, this platform device can be used to detect a wide range of other microorganisms and chemicals relevant for environmental monitoring and public health.

With the increased practice of preventative healthcare to help reduce costs worldwide, sensor technology improvement is vital to patient care. Point-of-care (POC) diagnostics can reduce time and lower labor in testing, and can effectively avoid transporting costs because of portable designs. Label-free detection allows for greater versatility in the detection of biological molecules. Here, we describe the use of an impedance-based POC biosensor that can detect changes in the surface modification of a micro-fabricated chip using impedance spectroscopy. Gold nanoparticles (GNPs) have been employed to evaluate the sensing ability of our new chip using impedance measurements. Furthermore, we used impedance measurements to monitor surface functionalization progress on the sensor’s interdigitated electrodes (IDEs). Electrodes made from aluminum and gold were employed and the results were analyzed to compare the impact of electrode material. GNPs coated with mercaptoundecanoic acid were also used as a model of biomolecules to greatly enhance chemical affinity to the silicon substrate. The portable sensor can be used as an alternative technology to ELISA (enzyme-linked immunosorbent assays) and polymerase chain reaction (PCR)-based techniques. This system has advantages over PCR and ELISA both in the amount of time required for testing and the ease of use of our sensor. With other techniques, larger, expensive equipment must be utilized in a lab environment, and procedures have to be carried out by trained professionals. The simplicity of our sensor system can lead to an automated and portable sensing system.