Search

mRNA vaccines have recently received significant attention due to their role in combating the SARS-CoV-2 pandemic. As a platform, mRNA vaccines have been shown to elicit strong humoral and cellular immune responses with acceptable safety profiles for prophylactic use. Despite their potential, industrial challenges have limited realization of the vaccine platform on a global scale. Critical among these challenges are supply chain considerations, including mRNA production, cost of goods, and vaccine frozen-chain distribution. Here, we assess the delivery of lipid nanoparticle-encapsulated mRNA (mRNA/LNP) vaccines using a split-dose immunization regimen as an approach to develop mRNA dose-sparing vaccine regimens with potential to mitigate mRNA supply chain challenges. Our data demonstrate that immunization by a mRNA/LNP vaccine encoding respiratory syncytial virus pre-F (RSV pre-F) over a 9 day period elicits comparable or superior magnitude of antibodies when compared to traditional bolus immunization of the vaccine. The split-dose immunization regimens evaluated in our studies were designed to mimic reported drug or antigen release profiles from microneedle patches, highlighting the potential benefit of pairing mRNA vaccines with patch-based delivery technologies to enable sustained release and solid-state stabilization. Overall, our findings provide a proof of concept to support further investigations into the development of sustained delivery approaches for mRNA/LNP vaccines.

Antimicrobial preservatives are used as functional excipients in multidose formulations of biological therapeutics to destroy or inhibit the growth of microbial contaminants, which may be introduced by repeatedly administering doses. Antimicrobial agents can also induce the biophysical instability of proteins and peptides, which presents a challenge in optimizing the drug product formulation. Elucidating the structural basis for aggregation aids in understanding the underlying mechanism and can offer valuable knowledge and rationale for designing drug substances and drug products; however, this remains largely unexplored due to the lack of high-resolution characterization. In this work, we utilize solution nuclear magnetic resonance (NMR) as an advanced biophysical tool to study an acylated 31-residue peptide, acyl-peptide A, and its interaction with commonly used antimicrobial agents, benzyl alcohol and

In response to immune pressure, influenza viruses evolve, producing drifted variants capable of escaping immune recognition. One strategy for inducing a broad-spectrum immune response capable of recognizing multiple antigenically diverse strains is to target conserved proteins or protein domains. To that end, we assessed the efficacy and immunogenicity of mRNA vaccines encoding either the conserved stem domain of a group 1 hemagglutinin (HA), a group 2 nucleoprotein (NP), or a combination of the two antigens in mice, as well as evaluated immunogenicity in naïve and influenza seropositive nonhuman primates (NHPs). HA stem-immunized animals developed a robust anti-stem antibody binding titer, and serum antibodies recognized antigenically distinct group 1 HA proteins. These antibodies showed little to no neutralizing activity in vitro but were active in an assay measuring induction of antibody-dependent cellular cytotoxicity. HA-directed cell-mediated immunity was weak following HA stem mRNA vaccination; however, robust CD4 and CD8 T cell responses were detected in both mice and NHPs after immunization with mRNA vaccines encoding NP. Both HA stem and NP mRNA vaccines partially protected mice from morbidity following lethal influenza virus challenge, and superior efficacy against two different H1N1 strains was observed when the antigens were combined. In vivo T cell depletion suggested that anti-NP cell-mediated immunity contributed to protection in the mouse model. Taken together, these data show that mRNA vaccines encoding conserved influenza antigens, like HA stem and NP in combination, induce broadly reactive humoral responses as well as cell-mediated immunity in mice and NHPs, providing protection against homologous and heterologous influenza infection in mice.

New classes of therapeutic peptides are being developed to prosecute biological targets which have been inaccessible to other modalities. Higher potency and longer half-life peptides have given rise to multiuse injectable formulations that enable convenient, low volume, and self-administered dosing; however, inclusion of antimicrobial preservatives to meet bactericidal requirements can impact other attributes of peptide formulations. Peptide-preservative interactions influencing solution-phase self-association of a non-insulin, linear, palmitoylated 31 amino acid peptide and two structurally similar peptides were assessed via turbidity, intrinsic fluorescence shifts and quenching, isothermal titration calorimetry, and 1H NMR. Meta-cresol and phenol specifically interact with the peptide, result in increased hydrophobicity near the tryptophan residue, and induce conformational changes, while benzyl alcohol does not impact tryptophan fluorescence, demonstrate any interaction enthalpy, or induce conformational changes. These same trends did not hold true for the other palmitoylated peptides evaluated, reinforcing the impacts of unique peptide sequences. Importantly, the presence of benzyl alcohol does increase the physical stability and solubility of the linear, 31 amino acid peptide under salt stress. We report new insights into the physical interactions of peptides with antimicrobial excipients, demonstrating a reversible association phenomenon and highlighting practical implications for formulation design and excipient selection.

Adjuvants have long been explored to enhance vaccine efficacy. Current adjuvants approved for human vaccines are mostly studied for their ability to improve antibody responses. There remains a need for development of novel adjuvants, especially those able to enhance cell-mediated immunity (CMI). In this preclinical study we assessed the effect of two novel adjuvants, a delta inulin microparticle Advax formulated with or without a toll-like receptor 9 (TLR9) agonist CpG oligonucleotide, and a Merck & Co., Inc., Kenilworth, NJ, USA proprietary lipid nanoparticle (LNP), on immune responses elicited by V160, an experimental replication-defective human cytomegalovirus vaccine. Adult rhesus macaques were immunized with a low dose of V160 (10 units) either alone or in combination with the adjuvants as compared to those immunized with a high dose of V160 alone (100 units). While neither adjuvant conferred a significant benefit to vaccine-elicited humoral immune responses at the dose tested, both enhanced cellular immune responses to V160, where Advax promoted both CD4+ and CD8+ T cells and LNP predominantly impacted the CD4+ T cell response. Transcriptome analyses of peripheral blood samples demonstrated different modes of action for these adjuvants. One day post vaccination, LNP induced upregulation of a large number of genes involved in the innate immune response similar to those triggered by viral infection. In contrast, Advax did not activate any known inflammatory pathways and did not significantly impact gene expression pattern until day 7 post administration, suggesting a unique, non-inflammatory mechanism. These data warrant further exploration of Advax and LNP as adjuvants in clinical trials for vaccines desiring to elicit both humoral and T cell responses.

The RSV Fusion (F) protein is a target for neutralizing antibody responses and is a focus for vaccine discovery; however, the process of RSV entry requires F to adopt a metastable prefusion form and transition to a more stable postfusion form, which displays less potent neutralizing epitopes. mRNA vaccines encode antigens that are translated by host cells following vaccination, which may allow conformational transitions similar to those observed during natural infection to occur. Here we evaluate a panel of chemically modified mRNA vaccines expressing different forms of the RSV F protein, including secreted, membrane associated, prefusion-stabilized, and non-stabilized structures, for conformation, immunogenicity, protection, and safety in rodent models. Vaccination with mRNA encoding native RSV F elicited antibody responses to both prefusion- and postfusion-specific epitopes, suggesting that this antigen may adopt both conformations in vivo. Incorporating prefusion stabilizing mutations further shifts the immune response toward prefusion-specific epitopes, but does not impact neutralizing antibody titer. mRNA vaccine candidates expressing either prefusion stabilized or native forms of RSV F protein elicit robust neutralizing antibody responses in both mice and cotton rats, similar to levels observed with a comparable dose of adjuvanted prefusion stabilized RSV F protein. In contrast to the protein subunit vaccine, mRNA-based vaccines elicited robust CD4+ and CD8+ T-cell responses in mice, highlighting a potential advantage of the technology for vaccines requiring a cellular immune response for efficacy.

In this study we evaluated the utility of in-vitro screening tools for predicting the in-vivo behavior of six cyclic peptides with different solubility and permeability properties (BCS class II and III), intended for oral delivery in presence of permeation enhancer Labrasol.An in vitro flux assay was used to assess peptide permeation across a biomimetic, lipid-based membrane and in vivo studies in rats were used to determine oral peptide bioavailability in the presence of Labrasol.The in vitro flux was significantly increased for BCS class III peptides, while it significantly decreased or remained unchanged for BCS class II peptides with increasing Labrasol concentrations. The different flux responses were attributed to the combination of reduced effective free peptide concentration and increased membrane permeability in the presence of Labrasol. In vivo studies in male Wistar-Hans rats indicated improved oral bioavailability at different extents for all peptides in presence of Labrasol. On comparing the in vitro and in vivo data, a potential direct correlation for BCS class III peptides was seen but not for BCS class II peptides, due to lower free concentrations of peptides in this class.This study assessed the utility of in vitro screening tools for selecting peptides and permeation excipients early in drug product development. Graphical Abstract Graphical Abstract and Figure 1 contains small text.Graphical Abstract text is made larger. The Figure 1 text cannot be made larger.

Alternative formulations of entecavir, a once daily oral hepatitis B antiretroviral, may improve treatment adherence by patients. We explored the use of biocompatible polymers to control entecavir dissolution in two formats suitable for subcutaneous implantation. Hot melt extrudates were prepared by extruding entecavir-polymer blends at specified weight ratios. Dip-coated tablets were prepared by compressing entecavir in a multi-tip tooling. Tablets were dip-coated in solutions of polymer and dried. In rodents, entecavir-poly(caprolactone) extrudates demonstrated >180 days of continuous drug release, although below the estimated efficacious target input rate. Drug pharmacokinetic profiles were tunable by varying the polymer employed and implant format. The rank order trends of drug input rates observed in vitro were observed in vivo in the detected plasma concentrations of entecavir. In all dose groups entecavir was not tolerated locally at the site of administration where adverse event severity correlated with drug input rate. These polymer-based implantable formats have applicability to long-acting formulations of high solubility compounds beyond entecavir.

We are interested in developing a vaccine that prevents genital herpes. Adjuvants have a major impact on vaccine immunogenicity. We compared two adjuvants, an experimental Merck Sharp & Dohme lipid nanoparticle (LNP) adjuvant, LNP-2, with CpG oligonucleotide combined with alum for immunogenicity in mice when administered with herpes simplex virus type 2 (HSV-2) glycoproteins C, D and E (gC2, gD2, gE2). The immunogens are intended to produce neutralizing antibodies to gC2 and gD2, antibodies to gD2 and gE2 that block cell-to-cell spread, and antibodies to gE2 and gC2 that block immune evasion from antibody and complement, respectively. Overall, CpG/alum was better at producing serum and vaginal IgG binding antibodies, neutralizing antibodies, antibodies that block virus spread from cell-to-cell, and antibodies that block immune evasion domains on gC2. We used a novel high throughput biosensor assay to further assess differences in immunogenicity by mapping antibody responses to seven crucial epitopes on gD2 involved in virus entry or cell-to-cell spread. We found striking differences between CpG/alum and LNP-2. Mice immunized with gD2 CpG/alum produced higher titers of antibodies than LNP-2 to six of seven crucial epitopes and produced antibodies to more crucial epitopes than LNP-2. Measuring epitope-specific antibodies helped to define mechanisms by which CpG/alum outperformed LNP-2 and is a valuable technique to compare adjuvants.

Achieving market approval of a new peptide therapeutic requires phase-appropriate demonstration of product safety, efficacy and quality across all stages of development, including raw materials, drug substance and drug product manufacture, product distribution and shelf-life. Of particular importance is the definition of a drug product formulation that meets requirements as defined by the Quality Target Product Profile (QTPP) and mitigates peptide-specific Chemistry, Manufacturing and Controls (CMC) liabilities. Peptide drug product formulations can range widely in complexity, but often require the inclusion of excipients that are selected to perform a number of functions, such as buffering pH, preserving sterility, mitigating chemical and/or physical instabilities of the peptide active substance or controlling the rate of peptide drug release upon administration in people. The choice of excipient(s) and composition(s) can impact multiple drug product attributes, which necessitates appropriate formulation characterization and data-driven decision-making regarding excipient use throughout development and ultimately in the final drug product. This chapter briefly surveys categories of excipients employed in therapeutic peptide formulation development, highlights guidance and regulations related to the selection and evaluation of such excipients and discusses the assessment and justification of excipient use in formulations, from discovery through development, with a focus on peptide-specific challenges in parenteral formulations.

The biopharmaceutical industry is experiencing renewed interest in the discovery and development of peptide therapeutics, enabled in part by advances in synthetic processes, phage display technologies and combinatorial libraries that have permitted the rapid design, identification and evaluation of potential new peptide actives. With more than 100 peptide drugs already on the market as of 2018, garnering collective sales in excess of $20 billion, the promise of peptide medicines is a compelling one. Yet broad realization of peptide drugs remains elusive: limitations in biological delivery, including short half-life, rapid metabolism, proteolytic cleavage, poor permeation across biological membranes and a propensity for chemical and physical degradation, present significant challenges to peptide drug development. This chapter addresses key stability and pharmacokinetic considerations for the development of peptide drugs, identifies approaches and methodologies for their assessments in preclinical research and development and discusses current and emerging chemistry strategies to address such liabilities through predictive molecular design.

Regimen adherence remains a major hurdle to the success of daily oral drug regimens for the treatment and prevention of human immunodeficiency virus (HIV) infection. Long-acting drug formulations requiring less-frequent dosing offer an opportunity to improve adherence and allow for more forgiving options with regard to missed doses. The administration of long-acting formulations in a clinical setting enables health care providers to directly track adherence. MK-8591 (4′-ethynyl-2-fluoro-2′-deoxyadenosine [EFdA]) is an investigational nucleoside reverse transcriptase translocation inhibitor (NRTTI) drug candidate under investigation as part of a regimen for HIV treatment, with potential utility as a single agent for preexposure prophylaxis (PrEP). The active triphosphate of MK-8591 (MK-8591-TP) exhibits protracted intracellular persistence and, together with the potency of MK-8591, supports its consideration for extended-duration dosing. Toward this end, drug-eluting implant devices were designed to provide prolonged MK-8591 release in vitro and in vivo. Implants, administered subcutaneously, were studied in rodents and nonhuman primates to establish MK-8591 pharmacokinetics and intracellular levels of MK-8591-TP. These data were evaluated against pharmacokinetic and pharmacodynamic models, as well as data generated in phase 1a (Ph1a) and Ph1b clinical studies with once-weekly oral administration of MK-8591. After a single administration in animals, MK-8591 implants achieved clinically relevant drug exposures and sustained drug release, with plasma levels maintained for greater than 6 months that correspond to efficacious MK-8591-TP levels, resulting in a 1.6-log reduction in viral load. Additional studies of MK-8591 implants for HIV treatment and prevention are warranted.

Sub-unit vaccines are primarily designed to include antigens required to elicit protective immune responses and to be safer than whole-inactivated or live-attenuated vaccines. But their purity and inability to self-adjuvant often result in weaker immunogenicity. Emerging evidence suggests that bio-engineered nanoparticles can be used as immunomodulatory adjuvants. Therefore, in this study we explored the potential of novel Merck-proprietary lipid nanoparticle (LNP) formulations to enhance immune responses to sub-unit viral antigens. Immunization of BALB/c and C57BL/6 mice revealed that LNPs alone or in combination with a synthetic TLR9 agonist, immune-modulatory oligonucleotides, IMO-2125 (IMO), significantly enhanced immune responses to hepatitis B virus surface antigen (HBsAg) and ovalbumin (OVA). LNPs enhanced total B-cell responses to both antigens tested, to levels comparable to known vaccine adjuvants including aluminum based adjuvant, IMO alone and a TLR4 agonist, 3-O-deactytaled monophosphoryl lipid A (MPL). Investigation of the quality of B-cell responses demonstrated that the combination of LNP with IMO agonist elicited a stronger Th1-type response (based on the IgG2a:IgG1 ratio) than levels achieved with IMO alone. Furthermore, the LNP adjuvant significantly enhanced antigen specific cell-mediated immune responses. In ELISPOT assays, depletion of specific subsets of T cells revealed that the LNPs elicited potent antigen-specific CD4(+) and CD8(+)T cell responses. Intracellular FACS analyses revealed that LNP and LNP+IMO formulated antigens led to higher frequency of antigen-specific IFNγ(+)TNFα(+)IL-2(+), multi-functional CD8(+)T cell responses, than unadjuvanted vaccine or vaccine with IMO only. Overall, our results demonstrate that lipid nanoparticles can serve as future sub-unit vaccine adjuvants to boost both B-cell and T-cell responses in vivo, and that addition of IMO can be used to manipulate the quality of immune responses.

To develop a tool based on siRNA-mediated knockdown of hepatic P450 oxidoreductase (POR) to decrease the CYP-mediated metabolism of small molecule drugs that suffer from rapid metabolism in vivo, with the aim of improving plasma exposure of these drugs.siRNA against the POR gene was delivered using lipid nanoparticles (LNPs) into rats. The time course of POR mRNA knockdown, POR protein knockdown, and loss of POR enzyme activity was monitored. The rat livers were harvested to produce microsomes to determine the impact of POR knockdown on the metabolism of several probe substrates. Midazolam (a CYP3A substrate with high intrinsic clearance) was administered into LNP-treated rats to determine the impact of POR knockdown on midazolam pharmacokinetics.Hepatic POR mRNA and protein levels were significantly reduced by administering siRNA and the maximum POR enzyme activity reduction (~85%) occurred 2 weeks post-dose. In vitro analysis showed significant reductions in metabolism of probe substrates due to POR knockdown in liver, and in vivo POR knockdown resulted in greater than 10-fold increases in midazolam plasma concentrations following oral dosing.Anti-POR siRNA can be used to significantly reduce hepatic metabolism by various CYPs as well as greatly increase the bioavailability of high clearance compounds following an oral dose, thus enabling it to be used as a tool to increase drug exposure in vivo.

Effective delivery of small interfering RNA (siRNA) requires efficient cellular uptake and release into cytosol where it forms an active complex with RNAi induced silencing complex (RISC). Despite rapid developments in RNAi therapeutics, improvements in delivery efficiency of siRNA are needed to realize the full potential of this modality in broad therapeutic applications. We evaluated potential physiological and biochemical barrier(s) to the effective liver delivery of siRNA formulated in lipid nanoparticle (LNP) delivery vehicles. The comparative siRNA delivery performance of three LNPs was investigated in rats. They were assembled with either C14- or C18-anchored PEG-lipid(s), cationic lipid(s), and various helper lipid(s) and contained the same siRNA duplex. These LNPs demonstrated differentiated potency with ED50's ranging from 0.02 to 0.25 mg/kg. The two C14-PEG-LNPs had comparable siRNA exposure in plasma and liver, while the C18-PEG-LNP demonstrated a higher plasma siRNA exposure and a slower but sustained liver uptake. RISC bound siRNA within the liver, a more proximal measure of the pharmacologically active siRNA species, displayed loading kinetics that paralleled the target mRNA knockdown profile, with greater RISC loading associated with more potent LNPs. Liver perfusion and hepatocyte isolation experiments were performed following treatment of rats with LNPs containing VivoTag-fluorescently labeled siRNA. One hour after dosing a majority of the siRNA within the liver was associated with hepatocytes and was internalized (within small subcellular vesicles) with no significant cell surface association, indicating good liver tissue penetration, hepatocellular distribution, and internalization. Comparison of siRNA amounts in hepatocytes and subcellular fractions of the three LNPs suggests that endosomal escape is a significant barrier to siRNA delivery where cationic lipid seems to have a great impact. Quantitation of Ago-2 associated siRNA revealed that after endosomal escape further loss of siRNA occurs prior to RISC loading. This quantitative assessment of LNP-mediated siRNA delivery has highlighted potential barriers with respect to endosomal escape and incomplete RISC loading for delivery optimization efforts.

A vast body of evidence suggests that nanoparticles function as potent immune-modulatory agents. We have previously shown that Merck proprietary Lipid NanoParticles (LNPs) markedly boost B-cell and T-cell responses to sub-unit vaccine antigens in mice. To further evaluate the specifics of vaccine delivery and dosing regimens in vivo, we performed immunogenicity studies in BALB/c and C57BL/6 mice using two model antigens, Hepatitis B Surface Antigen (HBsAg) and Ovalbumin (OVA), respectively. To assess the requirement for co-administration of antigen and LNP for the elicitation of immune responses, we evaluated immune responses after administering antigen and LNP to separate limbs, or administering antigen and LNP to the same limb but separated by 24 h. We also evaluated formulations combining antigen, LNP, and aluminum-based adjuvant amorphous aluminum hydroxylphosphate sulfate (MAA) to look for synergistic adjuvant effects. Analyses of antigen-specific B-cell and T-cell responses from immunized mice revealed that the LNPs and antigens must be co-administered-both at the same time and in the same location-in order to boost antigen-specific immune responses. Mixing of antigen with MAA prior to formulation with LNP did not impact the generation of antigen-specific B-cell responses, but drastically reduced the ability of LNPs to boost antigen-specific T-cell responses. Overall, our data demonstrate that the administration of LNPs and vaccine antigen together enables their immune-stimulatory properties.

Dengue virus has emerged as an important arboviral infection worldwide. As a complex pathogen, with four distinct serotypes, the development of a successful Dengue virus vaccine has proven to be challenging. Here, we describe a novel Dengue vaccine candidate that contains truncated, recombinant, Dengue virus envelope protein from all four Dengue virus serotypes (DEN-80E) formulated with ionizable cationic lipid nanoparticles (LNPs). Immunization studies in mice, Guinea pigs, and in Rhesus macaques, revealed that LNPs induced high titers of Dengue virus neutralizing antibodies, with or without co-administration or encapsulation of a Toll-Like Receptor 9 agonist. Importantly, LNPs were also able to boost DEN-80E specific CD4+ and CD8+ T cell responses. Cytokine and chemokine profiling revealed that LNPs induced strong chemokine responses without significant induction of inflammatory cytokines. In addition to being highly efficacious, the vaccine formulation proved to be well-tolerated, demonstrating no elevation in any of the safety parameters evaluated. Notably, reduction in cationic lipid content of the nanoparticle dramatically reduced the LNP’s ability to boost DEN-80E specific immune responses, highlighting the crucial role for the charge of the LNP. Overall, our novel studies, across multiple species, reveal a promising tetravalent Dengue virus sub-unit vaccine candidate.

Advances in technologies related to the design and manufacture of therapeutic peptides have enabled researchers to overcome the biological and technological challenges that have limited their application in the past. As a result, peptides of increasing complexity have become progressively important against a variety of disease targets. Developing peptide drug products brings with it unique scientific challenges consistent with the unique physicochemical properties of peptide molecules. The identification of the proper characterization tools is required in order to develop peptide formulations with the appropriate stability, manufacturability, and bioperformance characteristics. This knowledge supports the build of critical quality attributes and, ultimately, regulatory specifications. The purpose of this review article is to provide an overview of the techniques that are employed for analytical characterization of peptide drug products. The techniques covered are highlighted in the context of peptide drug product understanding and include chemical and biophysical approaches. Emphasis is placed on summarizing the recent literature experience in the field. Finally, the authors provide regulatory perspective on these characterization approaches and discuss some potential areas for further research in the field.

The application of nanoparticles for the delivery and targeting of pharmaceutical, therapeutic and diagnostic agents in cancer therapy has received significant attention in recent years. Nanoparticles may be constructed from a wide range of materials and used to encapsulate or solubilize chemotherapeutic agents for improved delivery in vivo or to provide unique optical, magnetic and electrical properties for imaging and therapy. Several functional nanoparticles have already been demonstrated, including some clinically approved liposome drug formulations and metallic imaging agents. The next generation of nanoparticle-based research is directed at the consolidation of functions into strategically engineered multifunctional systems, which may ultimately facilitate the realization of individual therapy. These multiplexed nanoparticles may be capable of identifying malignant cells by means of molecular detection, visualizing their location in the body by providing enhanced contrast in medical imaging techniques, killing diseased cells with minimal side effects through selective drug targeting, and monitoring treatment in real time. This article highlights recent progress in the design and engineering of multifunctional systems, as well as discusses the development of a new, scalable and economic method for the modular preparation of multiplex nanoparticles where functional properties can be precisely and simply tailored.

Maleimide-functional poly(ethylene glycol)-b-poly(epsilon-caprolactone) nanoparticles (NPs) were prepared via the Flash NanoPrecipitation technique. Subsequent reaction with a model ligand, bovine serum albumin (BSA), was conducted using thiol-maleimide conjugation. Reaction of up to 22% of NP surface maleimide-PEG tethers was obtained, with the percent conversion being essentially independent of the ratio of maleimide-PEG to methyl-PEG over the range 30-100%, respectively. At the highest surface coverage, BSA is calculated to essentially cover the NP surface area. Reaction parameters (reaction order and docking constant) describing the extent of ligand conjugation were determined. The reaction order is applicable to the conjugation of ligands presenting free thiol functionalities, while the value of the docking constant is ligand-dependent and accounts for physical and dynamic properties of the ligand-PEG interaction. Jointly, the particle formation process, using block copolymer-directed kinetically controlled assembly and surface functionalization represent a versatile new platform for the preparation of bioconjugated NPs with accurate control of ligand density and minimal processing steps.

We describe the preparation and characterization of hybrid block copolymer nanoparticles (NPs) for use as multimodal carriers for drugs and imaging agents. Stable, water-soluble, biocompatible poly(ethylene glycol)-block-poly(epsilon-caprolactone) NPs simultaneously co-encapsulating hydrophobic organic actives (beta-carotene) and inorganic imaging nanostructures (Au) are prepared using the flash nanoprecipitation process in a multi-inlet vortex mixer. These composite nanoparticles (CNPs) are produced with tunable sizes between 75 nm and 275 nm, narrow particle size distributions, high encapsulation efficiencies, specified component compositions, and long-term stability. The process is tunable and flexible because it relies on the control of mixing and aggregation timescales. It is anticipated that the technique can be applied to a variety of hydrophobic active compounds, fluorescent dyes, and inorganic nanostructures, yielding CNPs for combined therapy and multimodal imaging applications.

Magnetic resonance imaging (MRI)- and near-infrared (NIR)-active, multimodal composite nanocarriers (CNCs) are prepared using a simple one-step process, flash nanoprecipitation (FNP). The FNP process allows for the independent control of the hydrodynamic diameter, co-core excipient and NIR dye loading, and iron oxide-based nanocrystal (IONC) content of the CNCs. In the controlled precipitation process, 10 nm IONCs are encapsulated into poly(ethylene glycol) (PEG) stabilized CNCs to make biocompatible T2 contrast agents. By adjusting the formulation, CNC size is tuned between 80 and 360 nm. Holding the CNC size constant at an intensity weighted average diameter of 99 ± 3 nm (PDI width 28 nm), the particle relaxivity varies linearly with encapsulated IONC content ranging from 66 to 533 × 10(-3) m(-1) s(-1) for CNCs formulated with 4-16 wt% IONC. To demonstrate the use of CNCs as in vivo MRI contrast agents, CNCs are surface functionalized with liver-targeting hydroxyl groups. The CNCs enable the detection of 0.8 mm(3) non-small cell lung cancer metastases in mice livers via MRI. Incorporating the hydrophobic, NIR dye tris-(porphyrinato)zinc(II) into CNCs enables complementary visualization with long-wavelength fluorescence at 800 nm. In vivo imaging demonstrates the ability of CNCs to act both as MRI and fluorescent imaging agents.

Lipid nanoparticles (LNPs) represent the most clinically advanced technology for the systemic delivery of therapeutic siRNA in vivo. Toward this end, a novel class of LNPs comprising low molecular weight (MW) ionizable amino lipids having asymmetric architecture was recently reported.1 LNPs of these amino lipids, termed asymmetric LNPs, were shown to be highly efficacious and well tolerated in vivo; advances were enabled by improved endosomal escape, coupled with enhanced amino lipid metabolism and clearance. In this work, we show that, in contrast to their desirable pharmacological performance, asymmetric LNPs present a significant pharmaceutical developability challenge, namely physical instability limiting extended shelf life. Using orthogonal characterization methods, we identify the mechanism of LNP instability as Ostwald ripening and establish it to be driven predominantly by the asymmetric amino lipid component. Through rational optimization of LNP physical and macromolecular properties, we are able to significantly attenuate or entirely eliminate the Ostwald ripening instability. Modulation of LNP size, for example, effectively halts particle growth. Similarly, optimization of LNP macromolecular packing through deliberate selection of structurally matched colipids significantly diminishes the rate of ripening. This later experimental observation is substantiated by molecular dynamics simulations of LNP self-assembly, which establish a quantitative dependence of LNP macromolecular order on colipid structure. In totality, the experimental and molecular dynamics outcomes of this work support the rational design of LNP physical and chemical properties leading to effective Ostwald ripening stabilization and enable the advance of asymmetric LNPs as a clinic-ready platform for siRNA therapeutics.

The present study aimed at establishing feasibility of delivering short interfering RNA (siRNA) to target the coagulation cascade in rat and rabbit, two commonly used species for studying thrombosis and hemostasis. siRNAs that produced over 90% mRNA knockdown of rat plasma prekallikrein and rabbit Factor X (FX) were identified from in vitro screens. An ionizable amino lipid based lipid nanoparticle (LNP) formulation for siRNA in vivo delivery was characterized as tolerable and exerting no appreciable effect on coagulability at day 7 postdosing in both species. Both prekallikrein siRNA-LNP and FX siRNA-LNP resulted in dose-dependent and selective knockdown of target gene mRNA in the liver with maximum reduction of over 90% on day 7 following a single dose of siRNA-LNP. Knockdown of plasma prekallikrein was associated with modest clot weight reduction in the rat arteriovenous shunt thrombosis model and no increase in the cuticle bleeding time. Knockdown of FX in the rabbit was accompanied with prolongation in ex vivo clotting times. Results fit the expectations with both targets and demonstrate for the first time, the feasibility of targeting coagulation factors in rat, and, more broadly, targeting a gene of interest in rabbit, via systemic delivery of ionizable LNP formulated siRNA.

Nanomaterials have been demonstrated as useful tools for molecular imaging, molecular diagnosis and targeted therapy in biomedical research. The main advantages of such nanomaterials are improved circulation times, precise targeting, enhancement of dissolution rates and enhanced contrast. A challenge and opportunity for nanotechnological strategies is that multiple functionalities, such as therapeutics, targeting, imaging and stimuli responsiveness can be achieved within one nanoparticle. Multifunctional nanoparticles are now actively under investigation and are imminent as the next generation of nanoparticles for providing custom and tailored treatment. This review considers contemporary approaches and possible future directions in the emerging area of multifunctional nanoparticles with a special focus on targeted drug delivery.

The solution phase behavior of short, strictly alternating multiblock copolymers of type (A(n)B(n))(m) was studied using lattice Monte Carlo simulations. The polymer molecules were modeled as flexible chains in a monomeric solvent selective for block type A. The degree of block polymerization n and the number of diblock units per chain m were treated as variables. We show that within the regime of parameters accessible to our study, the thermodynamic phase transition type is dependent on the ratio of m / n. The simulations show microscopic phase separation into roughly spherical aggregates for m / n ratios less than a critical value and first-order macroscopic precipitation otherwise. In general, increasing m at fixed n, or n at fixed m, promotes the tendency toward macroscopic phase precipitation. The enthalpic driving force of phase change is found to universally scale with chain length for all multiblock systems considered and is independent of the existence of a true phase transition. For aggregate forming systems at low amphiphile concentrations, multiblock chains are shown to self-assemble into intramolecular, multichain clusters. Predictions for microstructural dimensions, including critical micelle concentration, equilibrium size, shape, aggregation parameters, and density distributions, are provided. At increasing amphiphile density, interaggregate bridging is shown to result in the formation of networked structures, leading to an eventual solution-gel transition. The gel is swollen and consists of highly interconnected aggregates of approximately spherical morphology. Qualitative agreement is found between experimentally observed physical property changes and phase transitions predicted by simulations. Thus, a potential application of the simulations is the design of multiblock copolymer systems which can be optimized with regard to solution phase behavior and ultimately physical and mechanical properties.

Background: BIND-2206 Accurins are novel polymeric nanoparticles encapsulating MK-2206, a Merck AKT inhibitor in phase 2 trials. MK-2206 targets the phosphatidylinositol 3-kinase (PI3K) pathway via AKT inhibition and has demonstrated therapeutic efficacy in the treatment of cancer albeit with dose limiting toxicities. Accurins have shown promise for targeting oncology agents preferentially to tumors, while limiting systemic exposure. To determine if encapsulation of MK-2206 improves therapeutic index, studies were performed to evaluate pharmacokinetics (PK), pharmacodynamics (PD), tolerability and anti-tumor activity compared to parent MK-2206. Materials and Methods: PK of four Accurin formulations with varying in vitro drug release rates was evaluated. Based on these data, two lead Accurins (BIND-2206C and BIND-2206D) were selected for further characterization. Since AKT inhibitors are documented to induce hyperglycemia in mice, blood glucose levels were also evaluated after acute administration of BIND-2206 Accurins or parent MK-2206 as a measure of tolerability. Using a panel of human tumor xenografts (VCaP, SK-OV-3 and BT-474) anti-tumor activity of the Accurins was assessed in mice. When tumors were established mice were dosed orally with parent MK-2206 or intravenously with BIND-2206 Accurins two or three times per week on a three week cycle. Tumor volume was measured post treatment to determine anti-tumor activity. Following final drug administration, tumors were collected for PK and PD evaluation. Extent and duration of tumor target inhibition was evaluated by measuring pAKT and total AKT using a mesoscale discovery method and was correlated to tumor MK-2206 levels. Results: Accurins BIND-2206C and BIND-2206D significantly enhanced the PK profile of parent MK-2206 by increasing Cmax (33 fold) and AUC (222 fold) and decreasing clearance (38 fold) in mice. In addition, both BIND-2206 Accurins improved tolerability as demonstrated by no hyperglycemic response compared to a 300% increase in blood glucose in nude mice treated with parent MK-2206. In the VCaP human prostate cancer tumor model, BIND-2206C inhibited tumor growth by 88% and BIND-2206D induced 16% tumor regression showing significant enhancement of anti-tumor efficacy compared to 55% tumor growth inhibition achieved by parent MK-2206. This correlated with high tumor exposure at 72 hours and prolonged tumor PD at 96 hours post dose for both Accurins compared to parent MK-2206. A similar increase in tumor exposure and prolonged PD response resulted in enhanced anti-tumor efficacy for BIND-2206 Accurins in the SK-OV-3 human ovarian cancer tumor model. In the BT-474 HER2 over-expressing human breast cancer tumor model, BIND-2206 Accurins did not improve efficacy compared to parent drug, although there was significant and prolonged tumor PD correlating with enhanced tumor PK. This suggests that anti-tumor efficacy is model specific and a combination strategy in the BT-474 model may be advantageous. Conclusions: BIND-2206 Accurins showed differentiated PK, increased tumor exposure, prolonged duration of target inhibition, superior efficacy and enhanced tolerability compared to parent MK-2206. These data suggest that nanoparticle formulations of the AKT inhibitor, MK-2206, may provide improved tolerability and therapeutic efficacy in a clinical setting. Citation Format: Louise Cadzow, Michael H. Lam, Young Ho Song, Maria Figueiredo, Hong Wang, David De Witt, Vincenzo Pucci, Jan-Rung Mo, Eric Lewis-Clark, Heidi Ferguson, Marian Gindy, Susan Low, Steve Zale, Jeff Hrkach, Caroline McGregor, Brian J. Long. Accurins improve the pharmacokinetics, pharmacodynamics, tolerability and anti-tumor activity of the AKT inhibitor MK-2206. [abstract]. In: Proceedings of the AACR-NCI-EORTC International Conference: Molecular Targets and Cancer Therapeutics; 2015 Nov 5-9; Boston, MA. Philadelphia (PA): AACR; Mol Cancer Ther 2015;14(12 Suppl 2):Abstract nr C197.