Search

本研究は、今日の保育・幼児教育現場において、他機関との連携の必要性が言われるなか、外部の専門家による巡回相談という事業について、園長をはじめとする園組織への影響力やニーズを概念化し、保育環境・職場環境に資することを目的とする。具体的には、巡回相談を利用した園運営の責任者である園長等施設管理職（以下、園長）へのインタビューを通し、利用する目的や要望等、巡回相談によって園側が感じ取っている効果や課題を明らかにし、巡回相談事業が、園長が担う園運営や人材育成に対し、関与する要因について可視化し、保育実践や保育者の専門性に望ましい連携・協働のあり方について提言する。分析結果より、保育環境に影響すると園長が感じている巡回相談事業について、〔アウトリーチ型の予防的支持〕〔間接的な保育・子育て支援の共鳴関係〕〔孤立から園を守るコンサルテーション〕〔巡回相談員に求める姿勢〕が重要な要素として示された。

PURPOSE: This study aims to confirm the usefulness of active acoustic emission (Active AE) for reproducible and non-invasive generation of physical external force which is required for conventional AE. METHODS: Experiment 1: A root dentin-resin adhesive interface was observed. The post space was filled with a dual-cure resin composite core material with and without adhesive. The vibration characteristics of the data obtained from the time-frequency analysis were evaluated. Experiment 2: A crown-abutment tooth adhesive interface was observed. Adhesive resin cement was used for luting the crown and adhesion states in the same specimen over time were analyzed with three measurements: at trial-fitting, immediately after luting, and 2 weeks after luting. Data were subjected to time-frequency analysis and relationships between amplitude (indicating loudness) and frequency (indicating the sound component) were analyzed. RESULTS: Experiment 1: Time-frequency analysis confirmed multiple peak frequencies for each specimen without adhesive and monomodal peak frequency in all specimens using adhesive. Experiment 2: Two weeks after luting, all specimens showed a single major peak except one which showed multiple weak peaks. The three-dimensional visualization of time-frequency analysis revealed one specimen with multiple weak peaks while all others displayed a single, low-amplitude band at 2 weeks after luting. CONCLUSION: The state of the adhesive interface can be evaluated using active AE. This basic technique may prove useful to evaluate changes in the adhesive interface of prostheses over time. ispartof: JOURNAL OF PROSTHODONTIC RESEARCH vol:66 issue:2 pages:236-242 ispartof: location:Japan status: published

The purpose of this review was to assess the literature regarding the decontamination of resin cement before the luting procedure in order to provide clinicians with a comparative overview of decontamination effects. A total of 19 articles were selected for inclusion in this review. The results indicated that bonding effectiveness is reduced due to residual adhesion inhibitors such as saliva, blood, hemostatic agents, and temporary/provisional cement. Self-etching and self-adhesive systems tend to be more negatively affected by adhesion inhibitors than do etch and rinse systems. Cleaning with an ultrasonic scaler or rotating brush have demonstrated conflicting effects in several studies. Some studies have reported that phosphoric acid has negative effects and recommend mild acid for decontamination. The application of phosphoric acid followed by sodium hypochlorite has been shown to help avoid negative effects. Alumina blasting has been investigated as a mechanical cleaning method in a relatively large number of experiments, most of which have confirmed its effectiveness. An intraoral cleaner containing functional monomers that has become commercially available in recent years is a promising method in clinical practice because it can easily and effectively remove temporary adhesive material. In addition, adhesion inhibitors can be easily removed from resin-coated dentin surfaces. ispartof: JAPANESE DENTAL SCIENCE REVIEW vol:57 pages:147-153 ispartof: location:Netherlands status: published

The effect of cleaner containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP) for removing temporary cement remnants on dentin surface was evaluated. Flat dentin surfaces were wet-polished (Co) and HY-BOND temporary cement hard (Shofu) was applied to the surface. This temporary cement was removed using an air-scaler (Sc), brush (Br), or phosphoric acid and NaOCl (NC). A prototype cleaner containing MDP (Kuraray Noritake Dental, Tokyo, Japan) was used with agitation mode (MC+AG). KATANA Avencia block (Kuraray Noritake Dental) was luted with SA Cement Plus Automix (Kuraray Noritake Dental). Co showed significantly higher bond strength than Sc or Br (p

Summary: Microtensile bond strength (μTBS) test was introduced in 1994. Since then, it has been utilized profoundly across many bond strength testing laboratories, making it currently one of the most standard and versatile bond strength test. Although it is a static and strength-based method, together with the morphological and spectroscopic investigations, it has been contributing immensely in the advancement of dentin adhesive systems. μTBS test has a greater discriminative capability than the traditional macro-shear bond test. During the early stage of its development, the authors predicted that this testing method would enable evaluation of the adhesive performances of resins to excavated carious or sclerotic dentin and the regional bond strengths of various portions of the cavity. In addition, they also stated the possibility of comparing the long-term stability of resin adhesion at various portions of the cavity walls on teeth extracted at various times after insertion of bonded restorations. In this review, we discussed the historical background, inception and the application of the μTBS test and proposed directions for further improvement of this testing method.

Children’s happiness is an important issue that needs to be addressed around the world; however, limited research has explored how children define happiness. In this study, we conducted a survey of elementary school children living in different countries and clarified the contextual definitions of happiness by a total of 842 children (Mean age = 11.01, SD = 1.05, effective rate = 97.34%) from Grades 4 to 6 living in Japan (n = 474), Mongolia (n = 121), and Finland (n = 247). We investigated the definition of children’s happiness using the stimulus sentence completion test. For Mongolian children, happiness was predominantly characterized by references to family relationships. For Finnish children, happiness appeared to be linked to autonomous involvement with things, personal achievement, and success. Furthermore, the happiness of Japanese children was largely characterized by pleasant versus unpleasant experiences. In addition, Japanese children often referred to “being scolded” and their happiness was not related to school success. Our findings concurred with the elements of Seligman’s (2012) concept of flourishing as a new criterion for judging well-being. It was also suggested that the dominant elements of happiness may differ depending on an individual’s country and culture.

The purpose of this study was to evaluate the effectiveness of both a resin primer containing methyl methacrylate (MMA) and a silanizing agent on bonding to indirect resin composite blocks, using two types of build-up hybrid resin composites.SHOFU BLOCK HC (Shofu) specimens were blasted with alumina, after which one of two surface treatments was applied: CERA RESIN BOND (Shofu, the Silane group) or HC primer (Shofu, the MMA group). Resin composites made using either Solidex Hardura (SDH, Shofu) or Ceramage Duo (CMD, Shofu) were built up and micro-tensile bond strength (μTBS) values were measured after storage in water for either 24h or 6 months (n=24 per group). The fracture surfaces after μTBS measurements and the resin block/build-up resin interfaces were observed by scanning electron microscopy (SEM).The bond strength of the Silane/SDH group significantly decreased after 6 months (p0.001), whereas in the MMA group there was no significant loss after 24h or 6 months (p=0.99). In the CMD group, the bond strength after 6 months was significantly lowered in both the Silane group (p0.001) and the MMA group (p0.001), but the latter still showed greater adhesion. SEM images demonstrated that the matrix resin was partially destroyed at the fracture surfaces of the MMA group and fracture surface unevenness was observed.A primer containing MMA produced stronger bonding to CAD/CAM resin even after long-term aging compared to a silane treatment.

A two-bottle self-curing universal adhesive (Tokuyama Universal Bond; Tokuyama Dental) that does not require a long waiting time or light curing after application of the bonding material has been developed. This study aimed to evaluate the influence of tooth and adhesive temperature during the bonding procedure on the effectiveness of dentin bonding. The results showed that the tooth temperature affected the effectiveness of the dentin bonding; therefore, to determine the precise bonding ability in the laboratory, the temperature of the tooth must be raised until it is the same as that of the oral cavity. In addition, the temperature of the material did not affect bonding effectiveness; this result confirms that it does not matter whether the refrigerated product is used soon after its removal from the refrigerator or after it reaches room temperature in the clinic. ispartof: DENTAL MATERIALS JOURNAL vol:41 issue:2 pages:317-322 ispartof: location:Japan status: published

PURPOSE: To analyze the causes of debonding of computer-aided design/computer-aided manufacturing (CAD/CAM) indirect resin composite premolar crowns with a focus on the morphological factors of the crown and abutment teeth. METHODS: The clinical courses of 109 CAD/CAM indirect resin composite crowns were observed, and the patients' background characteristics, crown locations, luting methods, types of abutments, distal-most/non-distal-most molars, and types of resin blocks were confirmed. To investigate the influence of the morphology of the crown and abutment teeth, the 1) vertical dimension of the abutment teeth, 2) taper, and 3) thickness of the crown occlusal surface during events were measured from the three-dimensional digital data. The Kaplan-Meier method and multivariable Cox proportional hazard model were used for the statistical analyses. The nonlinearity of the effect of each comparison factor was included in the model. RESULTS: Complications included 21 debonding cases, two crown fractures, five root fractures, and two core debondings. The cumulative no-debonding and no-crown-fracture rate over 1423 days (3 years and 11 months) was 77.4%. The multivariable Cox regression analysis revealed that the abutment teeth type of tooth (first or second premolar) (P = 0.02) and luting materials (P < 0.01) significantly influenced the debonding frequency. All morphological factors (1-3) significantly influenced the debonding. The hazard ratios and nonlinear graph indicated that the crown thickness was less effective than the vertical dimension and taper. CONCLUSION: The combination analysis of clinical outcomes and 3D digital data revealed that preparation of the abutment is important for avoiding crown debonding. ispartof: JOURNAL OF PROSTHODONTIC RESEARCH vol:66 issue:3 pages:402-408 ispartof: location:Japan status: published

PURPOSE: This study examined four cleaning methods and three chemical treatments for artificial saliva-contaminated fiber posts in terms of bonding durability to resin composite core materials. METHODS: Non-contaminated fiber posts (Tokuyama FR Post, Tokuyama Dental) and those contaminated (GC Fiber Post, GC) with artificial saliva (Saliveht Aerosol, Teijin Pharma) were used. Washing and drying (WD), alcohol cleaning (AlC), H3PO4 etching (P/WD), alumina blasting (B/D) for decontamination and silanization (Clearfil Ceramic Primer Plus, Kuraray Noritake Dental, Si), resin priming (HC Primer, Shofu, MMA), and bonding resin application (Clearfil Universal Bond Quick, Kuraray Noritake Dental, BR) for chemical treatment were performed. The treated fiber post was planted inside a cylindrical tube and filled with resin composite (DC Core Automix ONE, Kuraray Noritake Dental). The specimen was sectioned, and a push-out test was performed after 24 h, 1 month, and 3 months. The fracture surface was observed using a scanning electron microscope (SEM). RESULTS: Adhesion between the non-contaminated fiber post and resin composite did not improve by silanization and decreased by alumina blasting. SEM observations revealed a fractured glass fiber by alumina blasting. Saliva contamination decreased the bond strength between the fiber post and resin composite; however, recovery was achieved by WD, Alc, P/WD, and B/D. Compared to Si, BR (P = 0.009) was effective in restraining the long-term durability of bonding, whereas MMA (P = 0.99) was not. CONCLUSION: The application of bonding resin after alcohol cleaning is the most convenient and effective clinical procedure for fiber post surface treatment. ispartof: JOURNAL OF PROSTHODONTIC RESEARCH vol:66 issue:2 pages:288-295 ispartof: location:Japan status: published

The effects of silanization and resin primer application on CAD/CAM indirect resin composite block bonding were investigated. KATANA AVENCIA P blocks (Kuraray Noritake Dental) were treated with a silane coupling agent and/or a resin primer. The contact angles (CAs) of resin primer were observed before and after silanization. Panavia V5 (Kuraray Noritake Dental) was built after each treatment. Bond strengths were measured, and the interface was analyzed by energy dispersive X-ray spectroscopy (EDS). The CA showed that silane treatment improved the wettability of the resin primer to the resin block. The combination treatment of the silane and resin primer showed significantly higher bond strength than no treatment, only in the silanization or resin primer group (p

The aim of this study is to define chemical categories that can be applied to regulatory read-across assessments for repeated-dose toxicity, by classifying toxic substances based on their structures and mechanism of actions (MoAs). Hemolytic anemia, which often appears primarily, was examined as an example. An integrated database was constructed by collecting publicly available datasets on repeated-dose toxicity, in which 423 out of a total of 1518 chemicals were identified as capable of inducing hemolytic anemia. Subsequently, by grouping these chemicals based on their chemical structures and plausible MoAs on hemolytic substances, we identified the following categories: (i) anilines, (ii) nitrobenzenes, (iii) nitroanilines, (iv) dinitroanilines, (v) ethylene glycol alkyl ethers, (vi) hydroquinones, (vii) oximes, and (viii) hydrazines. In these categories, the toxicant and the measurable key events leading to hematotoxicity were identified, thereby allowing us to justify the categories and to discriminate the category substances. Moreover, toxicokinetics seems to critically affect the hemolytic levels of the category substances. Overall, the categories were validated through a comprehensive analysis of the collected information, while the utility was demonstrated by conducting a case study on the selected category. Further endeavors with this approach would attain categories for other organ toxicity endpoints.

The incidence of chromosomal abnormalities in twin pregnancies is not well-studied. In this retrospective study, we investigated the frequency of chromosomal abnormalities in twin pregnancies and compared the incidence of chromosomal abnormalities in dichorionic diamniotic (DD) and monochorionic diamniotic (MD) twins. We used data from 57 clinical facilities across Japan. Twin pregnancies of more than 12 weeks of gestation managed between January 2016 and December 2018 were included in the study. A total of 2899 and 1908 cases of DD and MD twins, respectively, were reported, and the incidence of chromosomal abnormalities in one or both fetuses was 0.9% (25/2899) and 0.2% (4/1908) in each group (p = 0.004). In this study, the most common chromosomal abnormality was trisomy 21 (51.7% [15/29]), followed by trisomy 18 (13.8% [4/29]) and trisomy 13 (6.9% [2/29]). The incidence of trisomy 21 in MD twins was lower than that in DD twins (0.05% vs. 0.5%, p = 0.007). Trisomy 21 was less common in MD twins, even when compared with the expected incidence in singletons (0.05% vs. 0.3%, RR 0.15 [95% CI 0.04–0.68]). The risk of chromosomal abnormality decreases in twin pregnancies, especially in MD twins.

Aim We aimed to evaluate the sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of noninvasive prenatal testing (NIPT) in high-risk pregnant women. Methods Pregnant women who underwent GeneTech NIPT, the most commonly used NIPT in Japan, between January 2015 and March 2019, at Japan NIPT Consortium medical sites were recruited for this study. The exclusion criteria were as follows: pregnant women with missing survey items, multiple pregnancy/vanishing twins, chromosomal abnormalities in the fetus other than the NIPT target disease, and nonreportable NIPT results. Sensitivity and specificity were calculated from the obtained data, and maternal age-specific PPV and NPV were estimated. Results Of the 45 504 cases, 44 263 cases fulfilling the study criteria were included. The mean maternal age and gestational weeks at the time of procedure were 38.5 years and 13.1 weeks, respectively. Sensitivities were 99.78% (95% confidence interval [95% CI]: 98.78-99.96), 99.12% (95% CI: 96.83-99.76), and 100% (95% CI: 88.30-100) for trisomies 21, 18, and 13, respectively. Specificities were more than 99.9% for trisomies 21, 18, and 13, respectively. Maternal age-specific PPVs were more than 93%, 77%, and 43% at the age of 35 years for trisomies 21, 18, and 13, respectively. Conclusion The GeneTech NIPT data showed high sensitivity and specificity in the detection of fetal trisomies 21, 18, and 13 in high-risk pregnant women, and maternal age-specific PPVs were obtained. These results could provide more accurate and improved information regarding NIPT for genetic counseling in Japan.

Summary: The purpose of this review was to assess the available literature regarding bonding between current adhesive systems and computer-aided design/computer-aided manufacturing (CAD/CAM) indirect resin materials, to provide clinicians with a comparative overview of the relevant bonding procedures. An electronic search was performed through PubMed based on the keywords CAD/CAM and dental bonding. Additional relevant literature was obtained from the citations in the articles. A total of 313 papers were identified, of which 281 were excluded as being unsuitable, and an additional 3 papers were identified, giving a total of 32 articles that are included in this review. Based on this survey, it is recommended that microretentive surfaces should be generated by either blasting or hydrofluoric acid etching. This initial process should be followed by silanization to ensure chemical adhesion prior to bonding to CAD/CAM indirect resin composite materials (including Lava Ultimet, KATANA AVENCIA block, Gradia Block, Cerasmart, Paradigm, and Block HC) and CAD/CAM polymer-infiltrated ceramics (such as Vita Enamic). The use of materials containing methyl methacrylate (MMA) also appears to improve the bonding of CAD/CAM poly(methyl methacrylate) (PMMA) resin materials (including XHIPC-CAD/CAM, artBloc Temp, and Telio). Keywords: Adhesive dentistry, Esthetic materials, Dental bonding, Bonding effectiveness, Computer-aided design, Computer-aided manufacturing

This study evaluated the effects of dehydration on the mechanical properties of adhesive resins and dentin, and on the microtensile bond strength (mu TBS) of adhesives. Third molars were randomly bonded with Clearfil Mega Bond (MB) or Clearfil SE Bond 2 (SE). After water-storage (37 degrees C; 24 h), mu TBS was obtained in 'wet' (tested after 5 min of removal from storage) and 'dehydrated' (tested after 10, 15 min and 24 h) conditions by a universal tester (crosshead speed: 1 mm/min). Data were analyzed by two-way ANOVA and Duncan's test. Hardness (H), Elastic modulus (E) and weight-loss of dentin beams and adhesive-resin discs were also monitored over time and analyzed by one-way repeated measures ANOVA and Bonferroni's test (alpha=0.05). Significant differences in bond strength were observed for adhesives and for conditions. Except for dentin's E, dehydration caused significant gradual changes in the H, E and weight of adhesive resins and dentin (p

Purpose This study evaluated the effects of different materials (composite resin system including a photo-cure adhesive (DC) vs. resin cement system including a self-etching primer (PV)) and techniques (direct vs. indirect) for resin core build-up on the bonding performance to root canal dentin.Methods The human teeth were decoronated and root canal preparation was performed. All specimens were randomly divided into four groups according to the combinations of the methods (Direct or Indirect) and the materials (DC: Clearfil DC Core, Kuraray Noritake Dental or PV: Panavia V5, Kuraray Noritake Dental). Micro-tensile bond strength (μTBS) and push-out tests were performed. Scanning electron microscope observations of the interface were also performed, and microcomputed tomography and optical coherence tomography were applied to evaluate the sealing ability.Results The Indirect group had significantly higher μTBSs than the Direct group in the DC group (P = 0.0076). The PV group had significantly higher bond strengths than the DC group in both the Direct and Indirect groups (P < 0.001). The Direct/PV group demonstrated significantly higher push-out bond strength than the Direct/DC group (P < 0.001). In the Direct/PV group, the formation of resin tags was observed even on the apical side of the canal. Microleakage was more clearly observed in the DC group than in the PV group.Conclusions PV has a higher bonding ability to root canal dentin than DC. When using DC, the indirect technique exhibited a higher bonding ability than the direct technique. ispartof: JOURNAL OF PROSTHODONTIC RESEARCH vol:65 issue:4 pages:565-572 ispartof: location:Japan status: published

This study evaluated the bonding effectiveness of a newly developed two-step hydrophobic bonding material. Three groups using different bonding systems were compared: BZF group, using the new bonding system (BZF-29; GC, Tokyo, Japan); GPB group, using a one-step bonding system (G-Premio Bond; GC); and SE2 group, using a two-step bonding system (CLEARFIL SE Bond 2; Kuraray Noritake Dental, Tokyo, Japan). Microtensile bond strength (µTBS) was measured after storage in water for 24 h, 3 months and 6 months (n=25/group). Fracture surfaces were observed under scanning electron microscopy. The BZF group showed significantly higher µTBS than the other groups (p

To evaluate the effects of double application of resin cement primers to dentin prepared with different diamond burs on the cement-dentin bond strengths.Sixty flat dentin surfaces were prepared and divided into 12 groups (n = 5) according to three experimental factors: 1. resin cements: RelyX Ultimate (RU), Multilink Automix (ML), and Panavia V5 (PV); 2. resin cement primer application: single or double; 3. dentin surface preparation with regular or superfine diamond burs. Cement-dentin sticks (1 mm2) were prepared for and underwent microtensile bond strength testing (µTBS). Statistical analysis was performed using three-way ANOVA and Duncan's test (α = 0.05). Fractured surfaces and cement-dentin interfaces were observed using SEM. Additional teeth were used to observe the demineralization effect of resin cement primers with SEM and transmission electron microscopy (TEM).All tested factors demonstrated significant effects on µTBS (p0.001). The combination of PV with superfine-grit bur and double application yielded the highest bond strengths. Surfaces prepared with superfine-grit burs demonstrated higher µTBS than did the regular-grit group, but a significant effect was not observed for all groups. The double application of primer significantly increased the bond strength for most combinations, except for PV with superfine-grit bur-prepared dentin.PV showed higher bond strengths than other resin cements. Double application of primer improved the bond strength of all cements to dentin. Bond strengths were higher when dentin was prepared with a superfine-grit bur.

Using transmission electron microscopy (TEM), this study investigated the characteristics of smear layers after preparation of dentin surfaces using different methods. In addition, this study analyzed, using scanning electron microscopy (SEM), the interactions of smear layers with the various acidic agents used subsequently to treat the dentin surface. Mid-coronal dentin surfaces were prepared according to one of five instrumentation methods: fracture; grinding with carbide bur; grinding with regular-grit diamond bur; grinding with superfine-grit diamond bur; or grinding with 600-grit silicon carbide (SiC) abrasive paper. Then, each prepared dentin surface was further divided into control (no further treatment) or treatment with one of the following agents: phosphoric acid solution (PAS); phosphoric acid gel (PAG); Clearfil SE Bond 2 Primer (SE2); or Scotchbond Universal Adhesive (SBU). Longitudinal ultra-thin sections were made for TEM observations. Dentin discs, representing each surface preparation and treatment method described above, were created, and the morphology was examined by SEM. The TEM results revealed differences in thickness and denseness of the smear layer, according to the different methods of instrumentation used to prepare the dentin surface. The two forms of phosphoric acid completely removed the smear layer in all groups. Agglomerated silica particles were observed on the top of the collagen layer after etching with PAG. For all dentin surfaces, except for that prepared with SiC, SE2 demonstrated better etching efficacy on different smear layers, whereas SBU provided only superficial interaction.

Benzyl salicylate is used as a fragrance ingredient and an ultraviolet light absorber, but its toxicity is unknown. Therefore, toxicity tests and hazard classification were conducted for screening assessment under the Japanese Chemical Substances Control Law. Benzyl salicylate was found to be non-genotoxic in vitro based on the chromosomal aberration test using Chinese hamster lung cells. However, the combined repeated-dose and reproductive/developmental screening toxicity test, in which male and female rats were administered benzyl salicylate by gavage at 0, 30, 100, or 300 mg/kg/day for 42 and 41–46 days, respectively, from 14 days before mating until postnatal Day 4, showed that repeated doses had major effects on the thymus, liver, epididymis, and femur at 100 and/or 300 mg/kg/day. Furthermore, although benzyl salicylate had no effect on the estrus cycle, fertility, corpus lutea, or implantation rate, embryonic resorption, offspring mortality, and neural tube defects were observed at 300 mg/kg/day, and the offspring had lower body weights at 30 and 100 mg/kg/day, suggesting teratogenicity similar to other salicylates. Based on the developmental toxicity, this chemical was classified as hazard class 2, with a lowest observed adverse effect level (LOAEL) of 30 mg/kg/day and a D-value of 0.003 mg/kg/day.

The purpose of this study was to evaluate drying methods for post space dentin bonding in a direct resin composite core build-up method.Experiment 1: Four root canal plastic models, having diameters of 1.0 or 1.8mm and parallel or tapered shapes, were prepared. After drying each post space using three drying methods (air drying, paper-point drying, or ethanol drying, which involves filling the space with 99.5 vol% ethanol followed by air drying), the residual liquid in the models was weighed. Experiment 2: Thirty endodontically treated single-root teeth were dried using the above-described drying methods and filled with dual-cure resin composite. The bonded specimens were sectioned into square beams of approximately 1mmExperiment 1: The results of air drying were significantly different from those of paper-point drying (p0.001) and ethanol drying (p0.001), and no significant difference was observed between paper-point drying and ethanol drying. Experiment 2: The μTBS significantly decreased in the order of ethanol drying, paper-point drying, and air drying (air drying/ethanol drying: p0.001, air drying/paper-point drying: p=0.048, ethanol drying/paper-point drying: p=0.032). TEM and μCT observation revealed a sufficient dentin/adhesive interface in the ethanol drying group.Ethanol drying was found to be more effective for post space dentin bonding, as compared with air drying and paper-point drying.

SUMMARY Objective: This study evaluated the effect of shortened application time on long-term bond strength with universal adhesives. Methods and Materials: Three universal adhesives were used: Clearfil Universal Bond (CU, Kuraray Noritake Dental Inc, Tokyo, Japan), Scotchbond Universal Adhesive (SB, 3M ESPE, St Paul, MN, USA) or G-Premio Bond (GP, GC Corp, Tokyo, Japan). Sixty molars were cut to expose midcoronal dentin and prepared with a regular diamond bur. Each adhesive was applied either according to the manufacturer's instruction or with shortened time. Specimens were stored in distilled water at 37°C for 24 hours and then cut into resin-dentin sticks. Microtensile bond strength (μTBS) was tested after either 24 hours or 1 year of water storage. Data were analyzed by the three-way ANOVA and Duncan tests (α=0.05). Fracture modes were analyzed under a scanning electron microscope (SEM). One dentin stick per group was selected after fracture mode analysis and further observed using transmission electron microscopy (TEM). Six additional dentin discs were prepared and conditioned with each adhesive under the different application time to observe the adhesive-smear layer interaction by SEM. Results: Shortened application time affected the μTBS (p Conclusions: One-year storage time had no effect on the μTBS of universal adhesives to bur-cut dentin. The performance of universal adhesives can be compromised when applied using a shortened application time.

4-Benzylphenol (CAS No. 101-53-1), a structural analog of bisphenol F, has estrogenic activity in vitro and in vivo, as is the case with bisphenol F. 4-Benzylphenol is used in plastics and during organic synthesis. Since its safety is largely unknown, we conducted toxicity tests as part of screening risk assessment in an existing chemical safety survey program. Based on results of the Ames test and the chromosomal aberration test using Chinese hamster lung cells (OECD TG 471 and 473), 4-benzylphenol was determined to be non-genotoxic in vitro. In a 28-day repeated-dose toxicity study, Crl:CD (SD) rats were administrated 4-benzylphenol by gavage at 0, 30, 150, or 750 mg/kg/day (OECD TG 407). Consequently, body weight was lower in males at 750 mg/kg/day. In the liver, relative organ weights were increased in both sexes at 750 mg/kg/day, and centrilobular hepatocellular hypertrophy was observed in males at 150 and 750 mg/kg/day. In the forestomach, hyperkeratosis and hyperplasia of squamous cells were observed in males at 150 and 750 mg/kg/day, and in females at 750 mg/kg/day. Based on these results, we identified the NOAEL for 4-benzylphenol as 30 mg/kg/day, with a hazard assessment value (D-value) of 0.05 mg/kg/day corresponding to hazard class 3.

The present study aimed to elucidate how saliva contamination affects microtensile bond strength of resin cement to CAD/CAM resin blocks and identify a decontamination method that can restore original bond strength.The KATANA AVENCIA block (Kuraray Noritake Dental) was sandblasted on the adherend surface (P-Co group). Then, the block was contaminated with artificial saliva (Saliveht Aerosol, Teijin). Air dry (N-Co), sandblasting (Sb) and phosphate acid cleaning (AT) groups were prepared. After silane treatment, PANAVIA V5 (Kuraray Noritake Dental) was built up and microtensile bond strength (μTBS) was measured after immersion in water (n=24 per group). Scanning electron microscopy (SEM) analysis, surface roughness and contact angle measurement of each surface were performed.The P-Co group showed the highest μTBS value, and bond strength was significantly lower in the N-Co group than the other groups (P0.001). In all groups, decreased bond strength resulted from long-term water storage. In the N-Co group, a contaminated layer was observed on the surface by SEM and the contact angle was significantly smaller than the other groups (P0.001). In Sb and AT groups, μTBS values that were reduced by artificial saliva contamination significantly increased but did not recover to P-Co group values (P0.001). SEM showed no morphological difference between P-Co, Sb and AT groups. The Sb group showed increased surface roughness.The long-term durability of bonds between CAD/CAM resin blocks and luting agent cement was significantly reduced by artificial saliva contamination. However, sandblasting or phosphoric acid cleaning can recover bonding effectiveness by 75-85%.