Search

Pristine graphene is potentially an ideal medium to transport spin information. Proximity effects, where a neighbouring material is used to alter the properties of a material in adjacent (or proximitized) regions, can also be used in graphene to generate and detect spins by acquiring spin-orbit coupling or magnetic exchange coupling. However, the development of seamless spintronic devices that are based uniquely on proximity effects remains challenging. Here, we report a two-dimensional graphene spin valve that is enabled by proximity to the van der Waals magnet Cr$_2$Ge$_2$Te$_6$. Spin precession measurements show that graphene acquires both spin-orbit coupling and magnetic exchange coupling when interfaced with the Cr$_2$Ge$_2$Te$_6$. This leads to spin generation by both electrical spin injection and the spin Hall effect, while retaining long-distance spin transport. The simultaneous presence of spin-orbit coupling and magnetic exchange coupling also leads to a sizeable anomalous Hall effect., Comment: 21 pages, 4 figures, and Supplementary information

Non-linear transport effects in response to external magnetic fields, i.e. electrical magnetochiral anisotropy (eMChA), have attracted much attention for their importance to study quantum and spin-related phenomena. Indeed, they have permitted the exploration of topological surface states and charge-to-spin conversion processes in low-symmetry systems. Nevertheless, despite the inherent correlation between the symmetry of the material under examination and its non-linear transport characteristics, there is a lack of experimental demonstration to delve into this relationship and to unveil their microscopic mechanisms. Here, we study eMChA in chiral elemental Tellurium (Te) along different crystallographic directions, establishing the connection between the different eMChA components and the crystal symmetry of Te. We observed different longitudinal eMChA components with collinear current and magnetic field, demonstrating experimentally the radial angular momentum texture of Te. We also measured a transverse non-linear resistance which, as the longitudinal counterpart, scales bilinearly with current and magnetic fields, illustrating that they are different manifestations of the same effect. Finally, we study the scaling law of the eMChA, evidencing that extrinsic scattering from dynamic sources is the dominant microscopic mechanism. These findings underscore the efficacy of symmetry-based investigations in understanding and predicting non-linear transport phenomena, with potential applications in spintronics and energy harvesting., Comment: 8 pages, 4 figures, and Supplemental Material

PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.

Strain is an effective strategy to modulate the optoelectronic properties of 2D materials, but it has been almost unexplored in layered hybrid organic-inorganic metal halide perovskites (HOIPs) due to their complex band structure and mechanical properties. Here, we investigate the temperature-dependent microphotoluminescence (PL) of 2D $(C_6H_5CH_2CH_2NH_3)_2Cs_3Pb_4Br_{13}$ HOIP subject to biaxial strain induced by a $SiO_2$ ring platform on which flakes are placed by viscoelastic stamping. At 80 K, we found that a strain of <1% can change the PL emission from a single peak (unstrained) to three well-resolved peaks. Supported by micro-Raman spectroscopy, we show that the thermomechanically generated strain modulates the bandgap due to changes in the octahedral tilting and lattice expansion. Mechanical simulations demonstrate the coexistence of tensile and compressive strain along the flake. The observed PL peaks add an interesting feature to the rich phenomenology of photoluminescence in 2D HOIPs, which can be exploited in tailored sensing and optoelectronic devices., Comment: 4 figures

Understanding the structural and magnetic properties in layered hybrid organic-inorganic metal halide perovskites (HOIPs) is key for their design and integration in spin-electronic devices. Here, we have conducted a systematic study on ten compounds to understand the effect of the transition metal (Cu$^{2+}$, Mn$^{2+}$, Co$^{2+}$), organic spacer (alkyl- and aryl-ammonium) and perovskite phase (Ruddlesden-Popper and Dion-Jacobson) on the properties of these materials. Temperature-dependent Raman measurements show that the crystals' structural phase transitions are triggered by the motional freedom of the organic cations as well as by the flexibility of the inorganic metal-halide lattice. In the case of Cu$^{2+}$ HOIPs, an increase of the in-plane anisotropy and a reduction of the octahedra interlayer distance is found to change the behavior of the HOIP from that of a 2D ferromagnet to that of a quasi-3D antiferromagnet. Mn$^{2+}$ HOIPs show inherent antiferromagnetic octahedra intralayer interactions and a phenomenologically rich magnetism, presenting spin-canting, spin-flop transitions and metamagnetism controlled by the crystal anisotropy. Co$^{2+}$ crystals with non-linked tetrahedra show a dominant paramagnetic behavior irrespective of the organic spacer and the perovskite phase. This work demonstrates that the chemical flexibility of HOIPs can be exploited to develop novel layered magnetic materials with tailored magnetic properties., Comment: 5 figures

When doped into a certain range of charge carrier concentrations, MoS2 departs from its pristine semiconducting character to become a strongly correlated material characterized by exotic phenomena such as charge density waves or superconductivity. However, the required doping levels are typically achieved using ionic-liquid gating or air-sensitive alkali-ion intercalation, which are not compatible with standard device fabrication processes. Here, we report on the emergence of superconductivity and a charge density wave phase in air-stable organic cation intercalated MoS2 crystals. By selecting two different molecular guests, we show that these correlated electronic phases depend dramatically on the intercalated cation, demonstrating the potential of organic ion intercalation to finely tune the properties of 2D materials. Moreover, we find that a fully developed zero-resistance state is not reached in few-nm-thick flakes, indicating the presence of three-dimensional superconductive paths which are severed by the mechanical exfoliation. We ascribe this behavior to an inhomogeneous charge carrier distribution, which we probe at the nanoscale using scanning near-field optical microscopy. Our results establish organic-ion intercalated MoS2 as a platform to study the emergence and modulation of correlated electronic phases.

A charge density wave (CDW) represents an exotic state in which electrons are arranged in a long range ordered pattern in low-dimensional materials. Although our understanding of the fundamental character of CDW has been enriched after extensive studies, its relationship with functional phenomena remains relatively limited. Here, we show an unprecedented demonstration of a tunable charge-spin interconversion (CSI) in graphene/1T-TaS$_2$ van der Waals heterostructures by manipulating the distinct CDW phases in 1T-TaS$_2$. Whereas CSI from spins polarized in all three directions are observed in the heterostructure when the CDW phase does not show commensurability, the output of one of the components disappears and the other two are enhanced when the CDW phase becomes commensurate. The experimental observation is supported by first-principles calculations, which evidence that chiral CDW multidomains are at the origin of the switching of CSI. Our results uncover a new approach for on-demand CSI in low-dimensional systems, paving the way for advanced spin-orbitronic devices., Comment: Funding information: Marie Sklodowska-Curie Actions, H2020-MSCA-ITN-2020; Project Acronym SPEAR; Grant Agreement No. 955671

Angle-twisting engineering has emerged as a powerful tool for modulating electronic properties in van der Waals heterostructures. Recent theoretical works have predicted the modulation of spin texture in graphene-based heterostructures by twist angle, although an experimental verification is missing. Here, we demonstrate the tunability of the spin texture and associated spin-charge interconversion with twist angle in WSe$_2$/graphene heterostructures by using spin precession experiments. For specific twist angles, we experimentally detect a spin component radial with the electron's momentum, in addition to the standard orthogonal component. Our results show that the helicity of the spin texture can be reversed by angle twisting, highlighting its critical role on the spin-orbit properties of WSe$_2$/graphene heterostructures and paving the way for the development of novel spin-twistronic devices., Comment: 14 pages, 5 figures and Supplementary Information

Electrical transport in non-centrosymmetric materials departs from the well-established phenomenological Ohm's law. Instead of a linear relation between current and electric field, a non-linear conductivity emerges along specific crystallographic directions. This non-linear transport is fundamentally related to the lack of spatial inversion symmetry. However, the experimental implications of an inversion symmetry operation on the non-linear conductivity remain to be explored. Here, we report on a large, non-linear conductivity in chiral Tellurium. By measuring samples with opposite handedness, we demonstrate that the non-linear transport is odd under spatial inversion. Furthermore, by applying an electrostatic gate, we modulate the non-linear output by a factor of 300, reaching the highest reported value excluding engineered heterostructures. Our results establish chiral Te as an ideal compound not just to study the fundamental interplay between crystal structure, symmetry operations and non-linear transport, but also to develop wireless rectifiers and energy-harvesting chiral devices., Comment: 7 pages, 4 figures, Supplemental Material

Graphene is a light material for long-distance spin transport due to its low spin-orbit coupling, which at the same time is the main drawback to exhibit a sizeable spin Hall effect. Decoration by light atoms has been predicted to enhance the spin Hall angle in graphene while retaining a long spin diffusion length. Here, we combine a light metal oxide (oxidized Cu) with graphene to induce the spin Hall effect. Its efficiency, given by the product of the spin Hall angle and the spin diffusion length, can be tuned with the Fermi level position, exhibiting a maximum (1.8 $\pm$ 0.6 nm at 100 K) around the charge neutrality point. This all-light-element heterostructure shows a larger efficiency than conventional spin Hall materials. The gate-tunable spin Hall effect is observed up to room temperature. Our experimental demonstration provides an efficient spin-to-charge conversion system free from heavy metals and compatible with large-scale fabrication., Comment: 15 pages, 4 figures, and Supporting Information. Minor typos corrected in this version. Funding information: Marie Sklodowska-Curie Actions, H2020-MSCA-ITN-2020; Project Acronym SPEAR; Grant Agreement No. 955671

The exfoliation of layered magnetic materials generates atomically thin flakes characterized by an ultrahigh surface sensitivity, which makes their magnetic properties tunable via external stimuli, such as electrostatic gating and proximity effects. Another powerful approach to tailor magnetic materials is molecular functionalization, which leads to hybrid interface states with peculiar magnetic properties, called spinterfaces. However, spinterface effects have not yet been explored on layered magnetic materials. Here, we demonstrate the emergence of spinterface effects at the interface between flakes of the prototypical layered magnetic metal Fe3GeTe2 and thin films of paramagnetic Co-phthalocyanine. Magnetotransport measurements show that the molecular layer induces a magnetic exchange bias in Fe3GeTe2, indicating that the unpaired spins in Co-phthalocyanine develop antiferromagnetic ordering by proximity and pin the magnetization reversal of Fe3GeTe2. The effect is strongest for a Fe3GeTe2 thickness of 20 nm, for which the exchange bias field reaches -840 Oe and is measurable up to approximately 110 K. This value compares very favorably with previous exchange bias fields reported for Fe3GeTe2 in all-inorganic van der Waals heterostructures, demonstrating the potential of molecular functionalization to tailor the magnetism of van der Waals layered materials.

Physical Layer Security (PLS) is an emerging concept in the field of secrecy for wireless communications that can be used alongside cryptography to prevent unauthorized devices from eavesdropping a legitimate transmission. It offers low computational cost and overhead by injecting an interfering signal in the wiretap channels of potential eavesdroppers. This paper discusses the benefits of the Artificial Noise and Cooperative Jamming techniques in the context of Vehicle-to-everything (V2X) networks, which require secure data exchange with small latency. The simulations indicate that messages can be safely delivered even with devices that have low available power., Comment: 5 pages, 6 figures

This thesis develops recent work on the so called Volume-Complexity and Action-Complexity conjectures. According to this family of proposals, geometric quantities can be defined in some holographic gravitational theories that can be mapped with the concept of quantum complexity for states in a dual quantum-mechanical theory. In this work, we review the original motivations for the use of quantum-information theory in the search of a theory of quantum gravity, and argue in favour of holographic complexity as a promising new tool that could play a key role in the elucidation of the properties of black holes. After this introduction, we devote some time to the study of `exotic' thermodynamical systems of diverse origin, confronting the conjectures with expectations and seeking for new behaviours of holographic complexity that could help us understand or refine the existing proposals. Next, we turn our attention to the study of holographic complexity for singular spacetimes, defining slightly modified versions of the conjecture that are well adapted to singularities and searching for universal behaviours of complexity dynamics within these setups. Finally, we finish with some speculations about the relation between holographic complexity and older characterization criteria for singularities in general relativity., Comment: 151 pages, Ph. D. thesis (2020). Introductory chapter summarizes the motivations for connecting entanglement and complexity with gravity, while chapters 2, 3 and 4 are closely based on arXiv:1510.00349, arXiv:1710.06415, arXiv:1805.05291 and arXiv:1912.00904

A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared with micromagnetic simulations, revealing the presence of defects which pin the magnetic domain walls. A comparison of different types of defects and the domain walls location suggests that the main source of pinning in these microcrystals are linear structural defects induced in the spinel by the substrate steps underneath the islands., Comment: 9 pages, 3 figures

Chiral materials are the ideal playground for exploring the relation between symmetry, relativistic effects, and electronic transport. For instance, chiral organic molecules have been intensively studied to electrically generate spin-polarized currents in the last decade, but their poor electronic conductivity limits their potential for applications. Conversely, chiral inorganic materials such as Tellurium are excellent electrical transport materials, but have not been explored to enable the electrical control of spin polarization in devices. Here, we demonstrate the all-electrical generation, manipulation, and detection of spin polarization in chiral single-crystalline Tellurium nanowires. By recording a large (up to 7%) and chirality-dependent unidirectional magnetoresistance, we show that the orientation of the electrically generated spin polarization is determined by the nanowire handedness and uniquely follows the current direction, while its magnitude can be manipulated by an electrostatic gate. Our results pave the way for the development of magnet-free chirality-based spintronic devices.

The development of high-power density vanadium redox flow batteries (VRFBs) with high energy efficiencies (EEs) is crucial for the widespread dissemination of this energy storage technology. In this work, we report the production of novel hierarchical carbonaceous nanomaterials for VRFB electrodes with high catalytic activity toward the vanadium redox reactions (VO2+/VO2+ and V2+/V3+). The electrode materials are produced through a rapid (minute timescale) low-pressure combined gas plasma treatment of graphite felts (GFs) in an inductively coupled radio frequency reactor. By systematically studying the effects of either pure gases (O2 and N2) or their combination at different gas plasma pressures, the electrodes are optimized to reduce their kinetic polarization for the VRFB redox reactions. To further enhance the catalytic surface area of the electrodes, single-/few-layer graphene, produced by highly scalable wet-jet milling exfoliation of graphite, is incorporated into the GFs through an infiltration method in the presence of a polymeric binder. Depending on the thickness of the proton-exchange membrane (Nafion 115 or Nafion XL), our optimized VRFB configurations can efficiently operate within a wide range of charge/discharge current densities, exhibiting energy efficiencies up to 93.9%, 90.8%, 88.3%, 85.6%, 77.6%, and 69.5% at 25, 50, 75, 100, 200, and 300 mA cm-2, respectively. Our technology is cost-competitive when compared to commercial ones (additional electrode costs < 100 euro m-2) and shows EEs rivalling the record-high values reported for efficient systems to date. Our work remarks on the importance to study modified plasma conditions or plasma methods alternative to those reported previously (e.g., atmospheric plasmas) to improve further the electrode performances of the current VRFB systems.