Search

Ellen L Terry, Yvette M Güereca, Satin L Martin, Jamie L RhudyDepartment of Psychology, The University of Tulsa, Tulsa, OK, USA Objectives: Prior research has shown a relationship between blood glucose levels and some forms of self-regulation (eg, executive function), with low blood glucose levels associated with impaired self-regulation. Further, engagement in self-regulation tasks depletes blood glucose. Given these relationships, the present study examined whether blood glucose is associated with another form of self-regulation, ie, descending pain modulatory processes. Methods: Forty-seven (32 female) pain-free participants were recruited and completed testing. Blood glucose was measured from finger sticks and a digital meter before and after experimental pain tests. Pain tests included the nociceptive flexion reflex (NFR) threshold to assess descending modulation of spinal nociception, but also electric pain threshold to assess perceptual pain detection. The Stroop color word naming test was also assessed before and after pain testing to examine changes in executive function. Results: Results indicated that mean blood glucose levels decreased after pain testing, but Stroop performance did not significantly change. Importantly, changes in blood glucose were correlated with NFR threshold, such that decreases in blood glucose were associated with lower NFR thresholds (reduced descending inhibition). Changes in blood glucose were unrelated to pain threshold or executive function. Conclusion: This study suggests that glucose depletion may impair performance of descending inhibitory processes, without impacting the perceptual detection of pain (pain threshold). Although findings need to be replicated, maintaining adequate glucose levels may be necessary to support inhibition of spinal nociception. Keywords: pain, nociception, glucose, descending modulation, executive function

Background: Maine is a rural state with an aging population located in the northeastern United States. Pharmacists play an important role in serving the public’s health as they are often the most available point-of-contact within a community. Objective: To assess the current pharmacy practice needs as viewed by licensed pharmacists across our rural state, and to distinguish issues that are unique to rural pharmacy practice. Methods: An online survey was sent to all licensed pharmacists in the state in the fall of 2014 (n=1,262) to assess their pharmacy practice needs, and specify an rural-specific needs, within the categories of (1) opioid misuse, abuse, and diversion, (2) challenges associated with access to healthcare, (3) poly-pharmacy use, (4) meeting the needs of special populations, (5) lack of antibiotic stewardship, and (6) resources, such as staffing. Results: The response rate was 22.1 % (n=279). We found the most agreed upon issue facing pharmacists’ in Maine is opioid use, misuse and diversion, followed closely by shortages in staffing. We also learned that pharmacists’ view pharmaceutical care for older adults, those with low health literacy, and those with mental disabilities more time-consuming. Some urban-rural differences were discovered in with regard to the pharmacists’ views; such as the magnitude of the distance barrier, and limited transportation options available to rural residents. Issues related to polypharmacy were viewed as more problematic by pharmacists practicing in urban versus rural sites. Conclusions: Pharmaceutical care in Maine must focus on meeting the needs of the elderly, those with disabilities, and those with limited health literacy. As with the rest of the nation, opioids challenge pharmacy practice in a variety of ways. These findings clarify areas that present opportunities for pharmacists to focus more specifically on Maine’s largely rural population.

Characterising the sensory profiles of beers made from new hop varieties is of considerable importance for their application in brewing. New Czech bitter varieties Boomerang and Gaia were tested in three-year pilot brews (200 l) of 12% single-hopped pale lager, produced in kettle and kettle+dry-hopped variants. The hop-derived aroma and bitterness profile of the beers was evaluated using a comprehensive descriptive method. Hop-related volatiles in beer were determined by GC/MS-MS method. Both of these bitter varieties showed a pleasant bitterness profile even in dry-hopped beers. The overall impression of the beers from the varieties tested was favourable, at the level of the control beer (Saaz). The profile of hop derived volatiles and aroma in beers from Gaia and Boomerang varieties were different. The results show the potential of Boomerang for both single kettle-hopped beers and dry-hopped lagers due to its interesting aroma profile (spicy, herbal, floral). The Gaia variety can be used in a similar way, with a preference for dry hopping to give a well-balanced hop-derived aroma profile. Both varieties have shown considerable potential for the production of new beer brands, and their drought tolerance may also help their widespread cultivation.

The production of H13 tool steel (TS) by material extrusion (MEX) is a promising method in various applications, but as-built surface roughness does not comply with the quality requirements. Hence, this study investigated the effects of cutting parameters on tool wear, cutting forces, surface quality, microhardness, structure, and residual stresses when machining H13 TS produced by MEX. Dry machining (DM) proved advantageous in certain indicators such as tool wear and cutting forces in comparison to the flood cooling (FC). The lowest surface roughness (0.08 µm) was achieved at the cutting speed of 80 m/min, feed per tooth of 0.005 mm, and FC which corresponded to a 41 % decrease compared to DM under same conditions. Surface microhardness increased by 20 % after machining, decreasing with distance from the surface. The highest compressive residual stresses were observed under FC, while the DM resulted in a 78.2 % decrease in residual stresses due to a partial annealing effect caused by higher surface temperature. Overall, DM exhibited great potential for achieving high-quality surfaces with a favorable structure and residual stresses. This study´s novelty and robustness lie in its significant contribution to practical industrial applications, such as mold and core production.

The study deals with the cult of St. Denis, bishop of Paris and the French “national” patron saint, in medieval Bohemia and Moravia. It attempts to provide answers to the questions about the meaning, character and spread of the veneration of St. Denis in Czech society.

Abstract Choroid plexus (ChP), the brain structure primarily responsible for cerebrospinal fluid production, contains a robust circadian clock, whose role remains to be elucidated. The aim of our study was to [1] identify rhythmically controlled cellular processes in the mouse ChP and [2] assess the role and nature of signals derived from the master clock in the suprachiasmatic nuclei (SCN) that control ChP rhythms. To accomplish this goal, we used various mouse models (WT, mPer2 Luc , ChP-specific Bmal1 knockout) and combined multiple experimental approaches, including surgical lesion of the SCN (SCNx), time-resolved transcriptomics, and single cell luminescence microscopy. In ChP of control (Ctrl) mice collected every 4 h over 2 circadian cycles in darkness, we found that the ChP clock regulates many processes, including the cerebrospinal fluid circadian secretome, precisely times endoplasmic reticulum stress response, and controls genes involved in neurodegenerative diseases (Alzheimer’s disease, Huntington’s disease, and frontotemporal dementia). In ChP of SCNx mice, the rhythmicity detected in vivo and ex vivo was severely dampened to a comparable extent as in mice with ChP-specific Bmal1 knockout, and the dampened cellular rhythms were restored by daily injections of dexamethasone in mice. Our data demonstrate that the ChP clock controls tissue-specific gene expression and is strongly dependent on the presence of a functional connection with the SCN. The results may contribute to the search for a novel link between ChP clock disruption and impaired brain health.

Book review on Pelc, Vladimír – Pelc, Vladimír. Daně z příjmů s komentářem. 19. přepr. vyd. OLOMOUC: ANAG, 2024, 790 s. Isbn 978-80-7554-368-4

The topic of human circadian rhythms is not only attracting the attention of clinical researchers from various fields but also sparking a growing public interest. The circadian system comprises the central clock, located in the suprachiasmatic nucleus of the hypothalamus, and the peripheral clocks in various tissues that are interconnected; together they coordinate many daily activities, including sleep and wakefulness, physical activity, food intake, glucose sensitivity and cardiovascular functions. Disruption of circadian regulation seems to be associated with metabolic disorders (particularly impaired glucose tolerance) and cardiovascular disease. Previous clinical trials revealed that disturbance of the circadian system, specifically due to shift work, is associated with an increased risk of type 2 diabetes mellitus. This review is intended to provide clinicians who wish to implement knowledge of circadian disruption in diagnosis and strategies to avoid cardio-metabolic disease with a general overview of this topic.

Tick-borne encephalitis (TBE) and Lyme neuroborreliosis (LNB), the most common tick-borne diseases of the central nervous system in Central Europe, are frequently associated with pareses. The aim of this study was to characterise paretic complications in patients with TBE and LNB, including their severity, persistence and impact on the patients' quality of life. Our retrospective observational study included patients with aseptic CNS infection due to TBE virus or Borrelia burgdorferi sensu lato. Paretic complications were evaluated in the acute phase and the patients were followed up until complete regression or long-term stabilisation of any neurological deficit. The severity of the neurological deficit was graded according to the modified Rankin Scale (mRS).A total of 823 patients (582 with TBE, 241 with LNB) was included. Paretic complications were diagnosed in 63 TBE patients (10.8 %) and in 147 LNB patients (61.0 %). In TBE, the most common neurological deficit was brachial plexus paresis in 21 patients (33 %) and bulbar symptoms in 18 patients (29 %). In LNB patients, facial nerve palsy was the most frequent neurological deficit (117patients; 79.6 %), followed by lower limb paresis in 23 patients (15.6 %). Forty-nine TBE patients and 134 LNB paretic patients completed follow-up. Paresis resolved within 3 weeks in 16 TBE patients (33 %) and 53 LNB patients (39.5 %), but the proportion of patients with paresis persisting for more than 12 months was significantly higher in TBE (34.7 vs. 3.7 %, p

Aims. Growth differentiation factor 15 (GDF15) shows potential predictive value in various cardiac conditions. We investigated relationships between GDF15 and clinical or procedural outcomes in patients with severe aortic stenosis undergoing transcatheter aortic valve implantation (TAVI) in order to propose clinically useful predictive risk stratification model. Methods. This prospective single-center registry enrolled 88 consecutive patients with severe symptomatic aortic stenosis treated with TAVI. Clinical parameters were collected and biomarkers including GDF-15 were measured within 24 h before TAVI. All relevant clinical outcomes according to the Valve Academic Research Consortium-2 were collected over the follow-up period. Results. The cohort included 52.3% of females. The mean age of study participants was 81 years; the mean Society of Thoracic Surgeons (STS) score and logistic EuroSCORE were 3.6% and 15.4%, respectively. The mortality over the entire follow-up period was 10.2%; no death was observed within the first 30 days following TAVI. Univariate analysis showed significant associations between GDF15 and mortality (P=0.0006), bleeding (P=0.0416) and acute kidney injury (P=0.0399). A standard multivariate logistic regression model showed GDF-15 as the only significant predictor of mortality (P=0.003); the odds ratio corresponding to an increase in GDF15 of 1000 pg/mL was 1.22. However, incremental predictive value was not observed when the STS score was combined with GDF15 in this predictive model. Conclusions. Based on our observations, preprocedural elevated GDF15 levels are associated with increased mortality and demonstrate their additional value in predicting adverse clinical outcomes in a TAVI population.

The study is concerned with the rate of evaporation from porous rock, including the second stage of evaporation characterised by the existence of a dry surface layer separated from the wet capillary zone by a sharp evaporation front. The main objective is to investigate the relationship between the depth of evaporation front and the rate of evaporation as the drying process progresses, and to compare measured evaporation rate with the corresponding calculated values. Sandstone core samples saturated with water were allowed to dry naturally under room conditions, while the changes in the evaporation rate and the depth of evaporation front, among other quantities, were measured. We demonstrate that the evaporation rate can be very accurately determined from the depth of the evaporation front and the ambient air temperature and relative humidity using Fick’s law for water-vapor diffusion. During the second stage of evaporation, the diffusion flux through the dry surface layer is computed using the water-vapor diffusion coefficient of the rock, determined from a separate wet cup experiment. In order to cover the first stage of evaporation, an additional parameter characterising the diffusion layer of air above the surface is required, either determined by the best fit to the measured evaporation rates, or adopted from previous studies. The calculated evaporation rate was in good agreement with measurements, with Pearson correlation coefficient 0.98 and relative error of the calculations averaging 15% over the evaporation front depths ranging from 0 to 29 mm. A workflow for determining the evaporation rate from sandstone outcrops is suggested, along with possible applications in sandstone weathering research.

The application possibilities of austenitic stainless steels in high friction, abrasion, and sliding wear conditions are limited by their inadequate hardness and tribological characteristics. In order to improve these properties, the thermochemical treatment of their surface by plasma nitriding is suitable. This article is focused on the corrosion resistance of conventionally plasma-nitrided AISI 304 stainless steel (530 °C, 24 h) in 0.05 M and 0.5 M sodium chloride solutions at room temperature (20 ± 3 °C), tested by potentiodynamic polarization and electrochemical impedance spectroscopy. Optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy are used for nitrided layer characterization. The experiment results confirmed the plasma-nitrided layer formation of increased micro-hardness related to the presence of Cr2N chromium nitrides and higher surface roughness compared to the as-received state. Both of the performed independent electrochemical corrosion tests point to a significant reduction in corrosion resistance after the performed plasma nitriding, even in a solution with a very low chloride concentration (0.05 mol/L).

Abstract Drilling into the solid material is one of the basic technological operations, which creates a cylindrical hole in an appropriate time with required quality. Drilling operation demands a favourable removal of chips from the cutting area because a creation of an undesirable shape of chips can impart a lower quality of the drilled hole corresponding with the generation of excess heat due to the intense contact of the chip with drill. The solution for a proper machining is a suitable modification of the drill geometry i.e., point and clearance angles as presented in current study. The tested drills are made of M35 high-speed steel characterized by a very thin core at the point of the drill. An interesting feature of the drills is the use of cutting speed higher than 30 m min−1, with the feed of 0.2 mm per revolution. The surface roughness (Ra and Rz lower than 1 µm and 6 µm respectively), cylindricity (0.045 mm), roundness (0.025 mm), perpendicularity of the hole axis (0.025 mm), diameters and position of the individual holes were achieved for a drill with point angle 138.32°and clearance angle 6.92 respectively. The increase of the drill point angle by 6° resulted in the decrease in the feed force of more than 150 N. In addition, an increase of the clearance angle by 1° resulted with a decrease in the feed force of 70 N. The results of the experiment showed that with the correct geometry of the tool the effective machining without using internal cooling can be realised.

Background: The CONtrolled delivery For ImproveD outcomEs with cliNiCal Evidence registry was initiated to characterize the clinical safety and device performance from experienced transcatheter aortic valve implantation (TAVI) centers in Europe and Australia that use the Portico valve to treat patients with severe aortic stenosis. We herein report for the first time the valve performance at 30-day across all implanted valve sizes and the 1-year survival from this registry. Methods: This was a prospective, multicenter, single-arm observational clinical investigation of patients clinically indicated for implantation of a Portico valve in experienced TAVI centers. Patients were treated with a commercially available valve (size 23, 25, 27, or 29 mm) using either the first-generation delivery system (DS) (n = 501) or the second-generation (FlexNav) DS (n = 500). Adverse events were adjudicated by an independent clinical events committee according to Valve Academic Research Consortium-2 criteria. Echocardiographic outcomes were assessed at 30 days by an independent core laboratory, and a survival check was performed at 1 year. Results: We enrolled 1001 patients (82.0 years, 62.5% female, 63.7% New York Heart Association functional class III/IV at baseline) from 27 clinical sites in 8 countries across Europe and one site in Australia. Implantation of a single valve was successful in 97.5% of subjects. Valve hemodynamics at 30 days were substantially improved relative to baseline, with large aortic valve areas and low mean gradients across all implanted valve sizes (aortic valve areas were 1.7 ± 0.4, 1.7 ± 0.5, 1.8 ± 0.5, and 2.0 ± 0.5 cm2, and mean gradients were 7.0 ± 2.7, 7.5 ± 4.7, 7.3 ± 3.3, and 6.4 ± 3.3 mmHg for 23, 25, 27, and 29 mm valve sizes, respectively). Across all implanted valve sizes, most patients (77.1%) had no patient-prosthesis mismatch. Death from any cause within 1 year occurred in 13.7% of the patients in the first-generation DS group as compared with 11.0% in the second-generation DS group (p = 0.2). Conclusions: The Portico valve demonstrated excellent hemodynamic performance across all valve sizes in a large cohort of subjects implanted in experienced TAVI centers. One-year survival rates were favorable when using both the first-generation and second-generation (FlexNav) DSs in this high-risk cohort. ClinicalTrials.gov Identifier: NCT03752866.

Abstract Background Chicks of precocial birds hatch well-developed and can search actively for food but their homeothermy develops gradually during growth. This makes them dependent on heat provided by parents (“brooding”), which is then traded off against other activities, mainly foraging. Although brooding has been documented in many precocial birds, little is known about the differences in the amount and efficiency of brooding care, brooding diel rhythmicity, and impact on the chick’s growth, particularly between species living in different climatic conditions. Results We used multisensory dataloggers to evaluate brooding patterns in two congeneric species inhabiting contrasting climate zones: temperate Northern lapwing (Vanellus vanellus) and desert Red-wattled lapwing (Vanellus indicus). In accordance with our expectation, the adult desert lapwings brooded the chicks slightly less compared to the adult temperate lapwings. However, the desert lapwings brooded their chicks in higher ambient temperatures and less efficiently (i.e. they could not reach the same brooding temperature as the temperate lapwings), which are new and hitherto unknown brooding patterns in precocial birds. In both species, night brooding prevailed even during warm nights, suggesting a general brooding rule among birds. Although the high rates of brooding can reduce the time spent by foraging, we found no negative effect of the high brooding rate on the growth rate in either species. Conclusions Our data suggest that the chicks of species breeding in colder climates may reduce their thermal demands, while their parents may increase the efficiency of parental brooding care. More research is however needed to confirm this as a rule across species.

Atherosclerosis is the most common cause of coronary steno-occlusive disease and acute myocardial infarction is the leading cause of death in industrialized countries. In patients with acute ST elevation myocardial infarction (STEMI), there is unquestionable evidence that primary percutaneous coronary intervention providing recanalization of the infarct related artery (IRA) is the preferred reperfusion strategy. Nevertheless, up to 50% of patients with STEMI have multivessel coronary artery disease defined as at least 50% stenosis exclusive of IRA. There is conflicting data regarding the optimal treatment strategy and timing in such patients. Currently, it is assumed that stable patients might benefit from complete revascularization particularly in reducing the need for future unplanned procedures but only culprit lesion should be treated during index procedure in unstable patients. In this article, we provide a comprehensive overview of this important and currently highly debated topic.

Purpose: The quality of medical physics education is heterogenous across training programs, despite its importance in radiation oncology (RO) residency training. We present the results of a pilot series of free high-yield physics educational videos covering 4 topics chosen from the American Society for Radiation Oncology core curriculum. Methods and materials: Scripting and storyboarding of videos were iterative processes performed by 2 ROs and 6 medical physicists, with animations created by a university broadcasting specialist. Current RO residents and those who had graduated after 2018 were recruited through social media and e-mail with an aim of 60 participants. Two validated surveys were adapted for use and were completed after each video as well as a final overall assessment. Content was released sequentially after completion of the survey instruments for each prior video. All videos were created and released within 1 year of project initiation with a duration of 9 to 11 minutes. Results: There were 169 enrollees for the pilot from across the world, 211% of the targeted cohort size. Of these, 154 met eligibility criteria and received the first video. One hundred eight enrollees initiated the series and 85 completed the pilot, resulting in a 78% completion rate. Participants reported improved understanding and confidence applying the knowledge learned in the videos (median score 4 out of 5). All participants reported that the use of graphic animation improved understanding across all videos. Ninety-three percent agreed with a need for additional resources geared specifically toward RO residents and 100% would recommend these videos to other residents. Use metrics revealed the average watch time was 7 minutes (range, 6:17-7:15). Conclusions: The high-yield educational physics video pilot series was successful in developing videos that were effective in teaching RO physics concepts.

The study deals with the medieval cult of the early medieval hermit and the Benedictine abbot St. Giles in the Bohemian lands from its earliest beginnings to the end of the Middle Ages. Saint Giles, living in the 7th and 8th centuries in the region of Septimania located in the south of modern‑day France, became one of the most popular Christian saints in the medieval Western and Central Europe due to his patronage. The study therefore seeks to create a comprehensive interpretation of the form of the St. Giles’s cult in the Bohemian lands in the Middle Ages. The historical research of the cult of St. Giles is carried out through a detailed analysis of the medieval narrative and material sources, iconography, legends and sources of Church‑administrative origin. The text presents, in detail and with the help of the analysis of relics, calendars and Church dedications, not only the spread of the St. Giles’s cult in the Bohemian lands in the 12th century, but also the close relationship of the Holy Roman Emperor Charles IV to the mentioned saint. The study also discusses the fine arts monuments and the cult of St. Giles as one of the Fourteen Holy Helpers at the end of the Middle Ages

Tree-killing bark beetles require rapid management, such as anti-attractants, to stop the enlargement of attack hot-spots. We tested two newer anti-attractant blends, both without verbenone and one with the addition of trans-4-thujanol, in traps against standard pheromone baits for inhibition of catch. Both blends provided effective catch reduction (>95%). We also tested these anti-attractant blends in tree protection experiments for two years. We had experimental plots with a center of an anti-attractant protected tree zone, with no traditional control area, but we followed tree kills in 10 m wide concentric rings to 100 m. In 2020, we had 12 plots, and 9 plots in 2021. Monitoring by low-strength pheromone traps followed beetle flight averaging 300/trap during the shorter period, August 2020, and 5000/trap during the longer period, May to August 2021. The blends of anti-attractants were 100% effective in avoiding tree mortality in both treated trees and their surroundings. There were no bark beetle attacks on any treated trees, and there was zero tree mortality up to 19 m in 2020, and up to 30 m in 2021, thus full protection to circa 20 m. The density of killed trees then increased from close to zero, over 20 to 50 m, reaching a level of ca 30 (trees/ha) then declined. The spatial pattern of tree mortality on our experimental plots was highly heterogeneous and individual 10m-ring data points on tree kill density could not be statistically separated. In contrast, a non-linear regression model showed a continuous increase of attacks over the distance from the center to a peak ca 60m, followed by a decline. This model agrees partly with the only similar study in the literature, but importantly, it does not give a peak of kill density at distances between the first and second rings close to treatment zones. Such patterns of close-quarter kills have been observed as a “switching” of attack in this and other scolytid systems manipulated by anti-attractants, but not in the present study, likely due to the elimination of verbenone from our blends.

In the original publication [...]

Seven new Czech “flavour hop” varieties were tested in pilot brewing trials (50 l), in which samples of Ale-style beer were prepared using dry hopping. Essential oils in the beer were determined by fluidized-bed extraction combined with gas chromatography–mass spectrometry. Hop-derived aromas in beer were evaluated by descriptive method. Comparison of terpene essential oils in samples showed differences between hop genotypes and only a partial relationship with the sensory profile of beer. A cluster analysis of hop aromas in beer revealed the relationship between the pairs of Saturn and Pluto; N and Eris; Ceres and Jupiter hop varieties. The submitted results present the sensory properties of these new varieties and are useful for further study of the relationship between chemical and sensory profile of dry hopped beers.

Solitary bees pollinate wild plants and crops. In the temperate zone, they mainly pollinate fruit trees. Most species nest in the soil, but mason bees nest in wooden cavities above ground. Their presence in orchards can be augmented by provision of artificial nesting sites. Two species of mason bees frequently use these artificial nesting opportunities in Central Europe. The red mason bee (Osmia bicornis) is the most common species in this region, which preferentially collects pollen from oak trees. The European orchard bee (Osmia cornuta) prefers pollen from fruit trees, but it is more thermophilic. Its spread to higher altitudes can be expected in response to climate change. A breeding technology based on detachable wooden nests is summarized in this paper based on a literature review and experimental experience in fruit orchards in Czechia.

Lithium is an effective mood stabilizer, but the mechanism of its therapeutic action is not well understood. We investigated the effect of lithium on the circadian clock located in the ventricle barrier complex containing the choroid plexus (CP), a part of the glymphatic system that influences gross brain function via the production of cerebrospinal fluid. The mPer2Luc mice were injected with lithium chloride (LiCl) or vehicle, and their effects on the clock gene Nr1d1 in CP were detected by RT qPCR. CP organotypic explants were prepared to monitor bioluminescence rhythms in real time and examine the responses of the CP clock to LiCl and inhibitors of glycogen synthase kinase-3 (CHIR-99021) and protein kinase C (chelerythrine). LiCl affected Nr1d1 expression levels in CP in vivo and dose-dependently delayed the phase and prolonged the period of the CP clock in vitro. LiCl and CHIR-99021 had different effects on 1] CP clock parameters (amplitude, period, phase), 2] dexamethasone-induced phase shifts of the CP clock, and 3] dynamics of PER2 degradation and de novo accumulation. LiCl-induced phase delays were significantly reduced by chelerythrine, suggesting the involvement of PKC activity. The effects on the CP clock may be involved in the therapeutic effects of lithium and hypothetically improve brain function in psychiatric patients by aligning the function of the CP clock-related glymphatic system with the sleep-wake cycle. Importantly, our data argue for personalized timing of lithium treatment in BD patients.

The impact of alimentary supplement, homeopaticum and probioticum on selected blood parameters was examined in dairy calves. The effect of algae alimentary supplement on nitrogen metabolism was indicated by its decrease of urea in blood (P < 0.05). The beneficial effect of homeopaticum on health of calves was indicated by the levels of hemoglobin, leukocytes, glucose and protein in blood (P < 0.05). No effect of probioticum on mentioned blood health parameters was identified (P > 0.05).

Incineration is currently the standard way of disposing of municipal waste. It uses components protected by high-temperature-resistant layers of materials, such as Inconel alloys. Therefore, the objective of the current paper is to study the mechanical properties and structure of a bimetallic Inconel 625-16Mo3 steel tube. The Inconel 625 layer was 3.5 mm thick and was applied to the surface of the tube with a wall thickness of 7 mm via the cold metal transfer method. The bimetallic tube was bent using a supercritical bend (d ≤ 0.7D). This paper is focused on the investigation of the material changes in the Inconel 625 layer areas influenced by the maximum tensile and compressive stresses after the bend. The change in layer thickness after the bend was evaluated and compared to the non-deformed tube. In addition, the local mechanical properties (nanohardness, Young modulus) across the indicated interfacial areas using quasistatic nanoindentation were investigated. Subsequently, a thorough microstructure observation was carried out in areas with maximum tensile and compressive stresses to determine changes in the morphology and size of dendrites related to the effect of tensile or compressive stresses induced by bending. It was found that the grain featured a stretched secondary dendrite axis in the area of tensile stress, but compressive stress imparted a prolongation of the primary dendrite axis.

Non-microbial beer turbidity of lager beers often indicates a technological problem. Therefore, the occurrence of permanent haze in filtered and stabilized beer should not be underestimated. In this study, practical examples from industrial breweries, where several types of non-microbiological haze of colloidal were identified, are presented. These examples of haze were caused by slightly different factors, and as a result, they had a different microscopic image. It is often accompanied by mechanical impurities and sometimes by microorganisms that function as nucleation centers. Moreover, a very interesting example of almost brilliant permanent beer haze caused by the destruction of yeast cells with the following pouring intracellular contents of cells into beer is introduced. This phenomenon, which could be called “precedent”, was caused by a bad physiological condition of yeasts cells and inappropriately chosen yeast separation technology.

Abstract Predation is the most common cause of nest failure in birds. While nest predation is relatively well studied in general, our knowledge is unevenly distributed across the globe and taxa, with, for example, limited information on shorebirds breeding in subtropics. Importantly, we know fairly little about the timing of predation within a day. Here, we followed 444 nests of the red‐wattled lapwing (Vanellus indicus), a ground‐nesting shorebird, for a sum of 7,828 days to estimate a nest predation rate, and continuously monitored 230 of these nests for a sum of 2,779 days to reveal how the timing of predation changes over the day and season in a subtropical desert. We found that 312 nests (70%) hatched, 76 nests (17%) were predated, 23 (5%) failed for other reasons, and 33 (7%) had an unknown fate. Daily predation rate was 0.95% (95%CrI: 0.76% – 1.19%), which for a 30‐day long incubation period translates into ~25% (20% – 30%) chance of nest being predated. Such a predation rate is low compared to most other avian species. Predation events (N = 25) were evenly distributed across day and night, with a tendency for increased predation around sunrise, and evenly distributed also across the season, although night predation was more common later in the season, perhaps because predators reduce their activity during daylight to avoid extreme heat. Indeed, nests were never predated when midday ground temperatures exceeded 45℃. Whether the diel activity pattern of resident predators undeniably changes across the breeding season and whether the described predation patterns hold for other populations, species, and geographical regions await future investigations.

Paradoxical embolism is one of the predominant causes of cryptogenic stroke and interventional secondary prevention, i.e., closure of the patent foramen ovale (PFO), is a much discussed issue. This review aims to provide a complex perspective on this topic, aggregates and comments on the available data and current guidelines. Several large trials were performed, some of which proved the superiority of PFO closure over pharmacotherapy while others have not. Studies detecting significant superiority of intervention worked with disproportionately high representation of large shunts compared to the general population. Other controversies also remain, such as the lack of comparison of the effect of modern anticoagulant/antiplatelet treatment to PFO closure or the risk of developing unwanted side effects after intervention, and these are discussed in detail. PFO closure is a suitable method for secondary prevention of paradoxical embolism and, therefore, cryptogenic stroke. However, this is only true for carefully selected patient populations and such selection is of the utmost importance in deciding on interventional or conservative treatment.

This study presents a method of tree species classification using individual tree metrics derived from a three-dimensional point cloud from unmanned aerial vehicle laser scanning (ULS). In this novel approach, we evaluated the metrics of 1045 trees using generalized linear model (GLM) and random forest (RF) techniques to automatically assign individual trees into either a coniferous or broadleaf group. We evaluated several statistical descriptors, including a novel approach using the Clark–Evans spatial aggregation index (CE), which indicates the level of clustering in point clouds. A comparison of classifiers that included and excluded the CE indicator values demonstrated their importance for improved classification of the individual tree point clouds. The overall accuracy when including the CE index was 94.8% using a GLM approach and 95.1% using an RF approach. With the RF approach, the inclusion of CE yielded a significant improvement in overall classification accuracy, and for the GLM approach, the CE index was always selected as a significant variable for correct tree class prediction. Compared to other studies, the above-mentioned accuracies prove the benefits of CE for tree species classification, as do the worse results of excluding the CE, where the derived GLM achieved an accuracy of 92.6% and RF an accuracy of 93.8%.

The presented work deals with the investigation of mechanical tribological properties on Inconel 625 superalloy, which is welded on a 16Mo3 steel pipe. The wall thickness of the basic steel pipe was 7 mm, while the average thickness of the welded layer was 3.5 mm. The coating was made by the cold metal transfer (CMT) method. A supercritical bending of 180° was performed on the material welded in this way while cold. The mechanical properties evaluated were hardness, wear resistance, coefficient of friction (COF) and change in surface roughness for both materials. The UMT Tribolab laboratory equipment was used to measure COF and wear resistance by the Ball-on-flat method, which used a G40 steel pressure ball. The entire process took place at an elevated temperature of 500 °C. The measured results show that the materials after bending are reinforced by plastic deformation, which leads to an increase in hardness and also resistance to wear. Superalloy Inconel 625 shows approximately seven times higher rate of wear compared to steel 16Mo3 due to the creation of local oxidation areas that support the formation of abrasive wear and do not create a solid lubricant, as in the case of steel 16Mo3. Strain hardening leads to a reduction of possible wear on Inconel 625 superalloy as well as on 16Mo3 steel. In the case of the friction process, the places of supercritical bending of the structure showed the greatest resistance to wear compared to the non-deformed structure.

Beer is a complex mixture consisting of hundreds of chemical substances. Some of them are macromolecules, such as proteins and polysaccharides that together with polyphenolic compounds form poorly soluble complexes causing beer turbidity or cold colloidal turbidity. Furthermore, beer turbidity can be caused also by procedural particles entering into beer during brewing process (filtration and stabilization aids) or by foreign particles from external environment (mechanical impurities). If turbidity, sediment or individual particles occur in filtered and stabilized beer, their origin must be determined since brilliant visual impression of the filtered beer influences an opinion of customers on a specific product. The identification of different species of turbidity using microscopic image, particle staining, enzymatic analysis or identification precursors is clearly described in this paper. The study includes pictorial documentation of various particles that may be part of beer turbidity.

Characterization of varietal profiles of hop secondary metabolites in beer is of considerable importance for hop growing and brewing. This three-year study focused on pilot brewing tests of three new Saaz derived hop varieties, namely Saaz Brilliant, Saaz Shine and Saaz Comfort. The sensory profiles of kettle and kettle+dry single hopped beers were monitored. At the same time, the impact of dry hopping technology on sensory perception of final beers and changes in volatile compounds was investigated. Pilot brews (200 l) of 12% pale lager were prepared in kettle and kettle+dry variants using the new Czech varieties and traditional Saaz as a control sample. Essential oils in beers were determined by GC/MS-MS method with the aim to clarify links to the beer sensory profile of both, kettle and dry hopping mode. The descriptive sensory method of hop-derived aromas and the triangle tests were employed to determine the sensory quality of beer. The overall sensory impression of beers from all tested varieties was at least comparable to traditional Saaz, and Saaz Comfort even reached better evaluation. The profile of essential oils and hop flavours in beer was partially different, however it was not rated worse than Saaz. The kettle+dry hopped beers of new varieties were significantly different from Saaz in the triangle test, Saaz Brilliant was preferred over the Saaz. The results showed considerable potential of new varieties for the production of interesting and taste-specific beers and the enrichment of the spectrum of fine aroma varieties of Czech hops.

Light detection and ranging (LiDAR) technology has become one of the most dominant acquisition methods for modeling forest attributes, such as very accurate tree structure information, which is necessary for qualitative forest management and research activities. In this study, we evaluated the efficacy of standalone unmanned aerial vehicle-laser scanning (UAV-LS) and terrestrial laser scanning (TLS) data to accurately estimate forest tree metrics under differing management types. Furthermore, we combined the UAV-LS and TLS data to test whether fusion can improve the mapping of the three-dimensional (3D) structure of individual trees to favor accurate estimates of tree metrics. We initially calculated the percentage of point density per square meter aboveground in each height class at intervals of 1 m for the UAV-LS, TLS, and fusion datasets. This helped illustrate the vertical point density distribution that reflects the structural complexity between broadleaf and conifer trees. We then used tree-level point clouds to assess several tree metrics, such as diameter at breast height (DBH), total tree height (HT), crown projection area (PAC), crown width (WC), crown length (LC), 3D crown surface (SC), and 3D crown volume (VC). Our results indicated that LiDAR fusion can increase the estimation accuracy of DBH and HT, especially in broadleaves (97.8% accuracy). In addition, fusion significantly reshaped the modeled crown structures in both plots, which led to improved estimates for all crown metrics. The results show empirical evidence that LiDAR fusion can also have a determining role in supporting ecosystem services. For example, detailed 3D mapping of tree crowns can be used to assess the mitigation of rainfall`s kinetic energy by tree crowns concerning soil erosion and sedimentation near habitable zones.

BackgroundThe MTNR1B gene encodes a receptor for melatonin, a hormone regulating biorhythms. Disruptions in biorhythms contribute to the development of type 2 diabetes mellitus (T2DM). Genetic studies suggest that variability in the MTNR1B gene affects T2DM development. Our aim was to compare the distribution of the genetic variant rs10830963 between persons differing in glucose tolerance in a sample of the Czech population (N=1206). We also evaluated possible associations of the polymorphism with insulin sensitivity, beta cell function, with the shape of glucose, insulin and C-peptide trajectories measured 7 times during a 3-hour oral glucose tolerance test (OGTT) and with glucagon response. In a subgroup of 268 volunteers we also evaluated sleep patterns and biorhythm.Results13 persons were diagnosed with T2DM, 119 had impaired fasting blood glucose (IFG) and/or impaired glucose tolerance (IGT). 1074 participants showed normal results and formed a control group. A higher frequency of minor allele G was found in the IFG/IGT group in comparison with controls. The GG constellation was present in 23% of diabetics, in 17% of IFG/IGT probands and in 11% of controls. Compared to CC and CG genotypes, GG homozygotes showed higher stimulated glycemia levels during the OGTT. Homozygous as well as heterozygous carriers of the G allele showed lower very early phase of insulin and C-peptide secretion with unchanged insulin sensitivity. These differences remained significant after excluding diabetics and the IFG/IGT group from the analysis. No associations of the genotype with the shape of OGTT-based trajectories, with glucagon or with chronobiological patterns were observed. However, the shape of the trajectories differed significantly between men and women.ConclusionIn a representative sample of the Czech population, the G allele of the rs10830963 polymorphism is associated with impaired early phase of beta cell function, and this is evident even in healthy individuals.

A new simultaneous method for determination of 16 heterocyclic compounds using SPE sample preparation and GC-MS determination was developed regarding increasing interest of the role of sensory active compounds in beer. LiChrolut® EN SPE columns proved to be optimal for both, a mixture of analytes with a different polarity and such complicated matrix as beer. Recoveries of individual analytes are about 100% except for three compounds (2-methylpyridine about 30%, maltol and furaneol about 50%); repeatability, uncertainty and LOQ are satisfactory for the method application. The method was used for monitoring of heterocyclic compounds formation during roasting, mashing, hop boiling and fermentation. To summarize, during roasting of malt, the concentration of oxygen heterocycle compounds (OHC) increases more rapidly in comparison with nitrogen heterocycles compounds (NHC) till a critical point where OHC starts to decrease and NHC starts to be formed sharper (with the exception of 2-acetylpyrrole which is similar to OHC). Finally, the total concentration of NHC during fermentation rapidly decreases whilst the OHC concentration is influenced by many factors, e.g., fermentation conditions and yeast strain.

Over the past two decades there has been a growing interest in Indian Ocean networks within diaspora studies, and within migration studies more generally. In this introduction we develop the idea of the Indian Ocean as a space within which diasporas come into being, endure, and sustain relationships. Taking this Indian Ocean perspective, we suggest that the concept of the diaspora as currently employed in scholarship could be strengthened and we outline some suggestions for a reframing of the concept. Through an emphasis on its enduring character, as a community, and through a decentring of the homeland, we propose to understand a diaspora as a community that is diffuse but coherent, both spatially and temporally, and that has agency, facilitating the activities of its members. This provides a framework for the variety of approaches to the concept in the articles in the collection that follows.

Colletes hederae Schmidt & Westrich, 1993 is a cryptic bee species from the C. succinctus species-group. The previous occurrence and spreading of this species were predominantly in south-western Europe. To determine if the species was spreading in Slovak territory, Hedera helix was monitored from autumn 2015. The ivy-bee was first recorded in Slovakia during autumn 2017. This species is widespread inside and around Bratislava; however, it was not recorded under this study in any sites located eastwards. In the Czech Republic, it was not recorded in the south-east part of the country in 2017–2019. In 2020, the occurrence of this species was confirmed in many localities in the south of the country and strong populations were discovered, especially in the towns Znojmo and Mikulov. The populations likely originated from neighbouring Austria, where this species was discovered in 2006 and the localities are usually less than 100 km away from Czech and Slovak localities. A further survey could map a route of the northwards spread of this species.