Search

The Copernicus Climate Change Service (C3S) provides open and free access to state-of-the-art climate data and tools for use by governments, public authorities, and private entities around the world. It is fully funded by the European Union and implemented by the European Centre for Medium-Range Weather Forecasts (ECMWF) together with public and private entities in Europe and elsewhere. With over 120,000 registered users worldwide, C3S has rapidly become an authoritative climate service in Europe and beyond, delivering quality-assured climate data and information based on the latest science. Established in 2014, C3S became fully operational in 2018 with the launch of its Climate Data Store, a powerful cloud-based infrastructure providing access to a vast range of global and regional information, including climate data records derived from observations, the latest ECMWF reanalyses, seasonal forecast data from multiple providers, and a large collection of climate projections. The system has been designed to be accessible to nonspecialists, offering a uniform interface to all data and documentation as well as a Python-based toolbox that can be used to process and use the data online. C3S publishes European State of the Climate reports annually for policy-makers, as well as monthly and annual summaries that are widely disseminated in the international press. Together with users, C3S develops customized indicators of climate impacts in economic sectors such as energy, water management, agriculture, insurance, health, and urban planning. C3S works closely with national climate service providers, satellite agencies, and other stakeholders on the improvement of its data and services.

The Copernicus Atmosphere Monitoring Service (CAMS), part of the European Union’s Earth observation program Copernicus, entered operations in July 2015. Implemented by the European Centre for Medium-Range Weather Forecasts (ECMWF) as a truly European effort with over 23,500 direct data users and well over 200 million end users worldwide as of March 2022, CAMS delivers numerous global and regional information products about air quality, inventory-based emissions and observation-based surface fluxes of greenhouse gases and from biomass burning, solar energy, ozone and UV radiation, and climate forcings. Access to CAMS products is open and free of charge via the Atmosphere Data Store. The CAMS global atmospheric composition analyses, forecasts, and reanalyses build on ECMWF’s Integrated Forecasting System (IFS) and exploit over 90 different satellite data streams. The global products are complemented by coherent higher-resolution regional air quality products over Europe derived from multisystem analyses and forecasts. CAMS information products also include policy support such as quantitative impact assessment of short- and long-term pollutant-emission mitigation scenarios, source apportionment information, and annual European air quality assessment reports. Relevant CAMS products are cited and used for instance in IPCC Assessment Reports. Providing dedicated support for users operating smartphone applications, websites, or TV bulletins in Europe and worldwide is also integral to the service. This paper presents key achievements of the CAMS initial phase (2014–21) and outlines some of its new components for the second phase (2021–28), e.g., the new Copernicus anthropogenic CO2 emissions Monitoring and Verification Support capacity that will monitor global anthropogenic emissions of key greenhouse gases.

The Copernicus Atmosphere Monitoring Service (CAMS) has recently produced a greenhouse gas reanalysis (version egg4) that covers almost 2 decades from 2003 to 2020 and which will be extended in the future. This reanalysis dataset includes carbon dioxide (CO2) and methane (CH4). The reanalysis procedure combines model data with satellite data into a globally complete and consistent dataset using the European Centre for Medium-Range Weather Forecasts' Integrated Forecasting System (IFS). This dataset has been carefully evaluated against independent observations to ensure validity and to point out deficiencies to the user. The greenhouse gas reanalysis can be used to examine the impact of atmospheric greenhouse gas concentrations on climate change (such as global and regional climate radiative forcing), assess intercontinental transport, and serve as boundary conditions for regional simulations, among other applications and scientific uses. The caveats associated with changes in assimilated observations and fixed underlying emissions are highlighted, as is their impact on the estimation of trends and annual growth rates of these long-lived greenhouse gases.

The Copernicus Climate (CDS) and Atmosphere (ADS) Data Stores implemented by ECMWF on behalf of the EC are instances of a shared underlaying infrastructure which was designed as a distributed system and open framework to provide seamless web-based and API-based access to a wide catalogue of datasets, tools, applications and other digital information fulfilling the objectives of the Services. Such an approach also allowed the implementation ofquality controlled standards. The infrastructure also integrates a Toolbox platform to perform operations and create web-based applications .that can be subsequently made available to end-users within the Data Store portals or even embedded on external platforms as in the case of Climate-Adapt (EEA). Due to the adoption of FAIR guiding principles (Findable, Accessible, Interoperable, Reusable) and international recognized standards across different components of the infrastructure, the Data Stores are currently able to interoperate and establish close synergies with other data and services platforms such as WEkEO. The Data Store infrastructure is hosted in an on-premises Cloud physically located within ECMWF premises in Bologna providing elasticity of resources and automated deployment capabilities. Having grown at a steady rate in terms of users, functional capabilities, workload and content since their official opening, the infrastructure is now looking to the new challenges and opportunities that lay ahead. In the coming future the Data Stores will remain at the core of both C3S and CAMS Services but the underlaying infrastructure is in the process for being further improved. Taking onboard operational experience, user feedback, lessons learned, know-how and updated technologies which may have evolved since the initial implementation are the key priorities of this new phase. The final objective of this modernisation effort is to make the current services more accessible and fully embrace Open-Source scientific software to ensure compatibility with state-of-the-art solutions such as machine learning, data cubes and interactive notebooks. In summary the Data Stores are evolving into a modern, cloud-based, more usable and interoperable infrastructure that will allow to: better meet the evolving requirements, scale-up according to increased demand, strengthen synergies with other platforms such as WEkEO, contribute to related initiatives such as the Destination Earth system and become a core building block for the European green and digital transformation. After several years in operation, more than 130k registered users and daily rates of 90 TB of data delivered , the aim of this presentation is to guide the audience through the past and present of the Climate and Atmosphere Data Stores and their Toolbox and engage participants into a discussion about the future infrastructure which is currently under development.

The Copernicus Atmosphere Monitoring Service (CAMS) reanalysis is the latest global reanalysis dataset of atmospheric composition produced by the European Centre for Medium-Range Weather Forecasts (ECMWF), consisting of three-dimensional time-consistent atmospheric composition fields, including aerosols and chemical species. The dataset currently covers the period 2003–2016 and will be extended in the future by adding 1 year each year. A reanalysis for greenhouse gases is being produced separately. The CAMS reanalysis builds on the experience gained during the production of the earlier Monitoring Atmospheric Composition and Climate (MACC) reanalysis and CAMS interim reanalysis. Satellite retrievals of total column CO; tropospheric column NO2; aerosol optical depth (AOD); and total column, partial column and profile ozone retrievals were assimilated for the CAMS reanalysis with ECMWF's Integrated Forecasting System. The new reanalysis has an increased horizontal resolution of about 80 km and provides more chemical species at a better temporal resolution (3-hourly analysis fields, 3-hourly forecast fields and hourly surface forecast fields) than the previously produced CAMS interim reanalysis. The CAMS reanalysis has smaller biases compared with most of the independent ozone, carbon monoxide, nitrogen dioxide and aerosol optical depth observations used for validation in this paper than the previous two reanalyses and is much improved and more consistent in time, especially compared to the MACC reanalysis. The CAMS reanalysis is a dataset that can be used to compute climatologies, study trends, evaluate models, benchmark other reanalyses or serve as boundary conditions for regional models for past periods.

As part of the Copernicus Atmosphere Monitoring Service (CAMS), operated by ECMWF on behalf of the European Commission, global analyses and forecasts of atmospheric composition have been produced operationally since 2015. These were built on many years of previous work under the GEMS and MACC projects, which began producing regular forecasts in 2007.Since the transition to an operational service, there have continued to be many new developments and improvements to the system in five major upgrades, including increased horizontal and vertical resolution, updated emissions and paramterisations, additional species such as nitrate aerosol, as well as updates to the underlying meteorological model and data assimilation. The components of this system (aerosols, gas-phase chemistry, meteorology and the ocean) are also now coupled more tightly via active feedbacks then ever before.In this interactive presentation, we will demonstrate the impact of a number of these developments on the performance of the resulting global air quality forecasts, alongside the continuing evolution of our approaches to assessing model improvement against independent in-situ and remote-sensing observations from a variety of platforms.Because the continuing evolution of an operational system can make the analysis of long-term trends problematic, we will also contrast this with the CAMS global reanalysis product, which (while not using the very latest version of the model) do provide a consistent long-term dataset from 2003 onwards.

The Copernicus Atmosphere Monitoring Service (CAMS, atmosphere.copernicus.eu) led by ECMWF is one of the major users of TROPOMI data. TROPOMI ozone retrievals have been routinely assimilated in the operational CAMS system since December 2018 and help CAMS to provide good quality daily ozone analyses and 5-day forecasts. CO, NO2, HCHO and SO2 retrievals from TROPMI are currently monitored in the operational CAMS system and CH4 in the CAMS GHG system. This means that the data are routinely compared with the CAMS atmospheric composition fields, but do not influence the CAMS analyses yet. Howerver, assimilation tests with TROPOMI CO, NO2, SO2 and CH4 data are ongoing and it is hoped that the routine assimilation of these species in the CAMS system can begin later this year. In this presentation we will give an update on the use or TROPOMI data in the CAMS system and show the latest results from the monitoring and asimilation tests carried out with the TROPOMI data by CAMS.

The Copernicus Atmosphere Monitoring Service (CAMS) is one of the six thematic services of the European Union's flagship Earth Observation programme Copernicus. CAMS is implemented by the European Centre for Medium-Range Weather Forecasts (ECMWF) together with a network of about 60 entities distributed in 20 European countries: it is thus a truly international and collaborative effort. CAMS delivers operationally a wide range of information products and services on air quality, emissions and surface fluxes, solar radiation and climate forcings. All CAMS atmospheric composition outputs are unrestricted and provided free-of-charge to users worldwide. The CAMS global forecasting system is using ECMWF's Integrated Forecasting System (IFS), which is used successfully for Numerical Weather Prediction and has been extended with modules for atmospheric chemistry, aerosols and greenhouse gases. Over 60 different satellite data streams are assimilated to provide twice daily global atmosphere composition forecasts.

A new global reanalysis data set of atmospheric composition (AC) for the period 2003–2015 has been produced by the Copernicus Atmosphere Monitoring Service (CAMS). Satellite observations of total column (TC) carbon monoxide (CO) and aerosol optical depth (AOD), as well as several TC and profile observations of ozone, have been assimilated with the Integrated Forecasting System for Composition (C-IFS) of the European Centre for Medium-Range Weather Forecasting. Compared to the previous Monitoring Atmospheric Composition and Climate (MACC) reanalysis (MACCRA), the new CAMS interim reanalysis (CAMSiRA) is of a coarser horizontal resolution of about 110 km, compared to 80 km, but covers a longer period with the intent to be continued to present day. This paper compares CAMSiRA with MACCRA and a control run experiment (CR) without assimilation of AC retrievals. CAMSiRA has smaller biases than the CR with respect to independent observations of CO, AOD and stratospheric ozone. However, ozone at the surface could not be improved by the assimilation because of the strong impact of surface processes such as dry deposition and titration with nitrogen monoxide (NO), which were both unchanged by the assimilation. The assimilation of AOD led to a global reduction of sea salt and desert dust as well as an exaggerated increase in sulfate. Compared to MACCRA, CAMSiRA had smaller biases for AOD, surface CO and TC ozone as well as for upper stratospheric and tropospheric ozone. Finally, the temporal consistency of CAMSiRA was better than the one of MACCRA. This was achieved by using a revised emission data set as well as by applying careful selection and bias correction to the assimilated retrievals. CAMSiRA is therefore better suited than MACCRA for the study of interannual variability, as demonstrated for trends in surface CO.

The Global Fire Assimilation System (GFASv1.0) calculates biomass burning emissions by assimilating Fire Radiative Power (FRP) observations from the MODIS instruments onboard the Terra and Aqua satellites. It corrects for gaps in the observations, which are mostly due to cloud cover, and filters spurious FRP observations of volcanoes, gas flares and other industrial activity. The combustion rate is subsequently calculated with land cover-specific conversion factors. Emission factors for 40 gas-phase and aerosol trace species have been compiled from a literature survey. The corresponding daily emissions have been calculated on a global 0.5° × 0.5° grid from 2003 to the present. General consistency with the Global Fire Emission Database version 3.1 (GFED3.1) within its accuracy is achieved while maintaining the advantages of an FRP-based approach: GFASv1.0 makes use of the quantitative information on the combustion rate that is contained in the FRP observations, and it detects fires in real time at high spatial and temporal resolution. GFASv1.0 indicates omission errors in GFED3.1 due to undetected small fires. It also exhibits slightly longer fire seasons in South America and North Africa and a slightly shorter fire season in Southeast Asia. GFASv1.0 has already been used for atmospheric reactive gas simulations in an independent study, which found good agreement with atmospheric observations. We have performed simulations of the atmospheric aerosol distribution with and without the assimilation of MODIS aerosol optical depth (AOD). They indicate that the emissions of particulate matter need to be boosted by a factor of 2–4 to reproduce the global distribution of organic matter and black carbon. This discrepancy is also evident in the comparison of previously published top-down and bottom-up estimates. For the time being, a global enhancement of the particulate matter emissions by 3.4 is recommended. Validation with independent AOD and PM10 observations recorded during the Russian fires in summer 2010 show that the global Monitoring Atmospheric Composition and Change (MACC) aerosol model with GFASv1.0 aerosol emissions captures the smoke plume evolution well when organic matter and black carbon are enhanced by the recommended factor. In conjunction with the assimilation of MODIS AOD, the use of GFASv1.0 with enhanced emission factors quantitatively improves the forecast of the aerosol load near the surface sufficiently to allow air quality warnings with a lead time of up to four days.

Daily global analyses and 5-day forecasts are generated in the context of the European Monitoring Atmospheric Composition and Climate (MACC) project using an extended version of the Integrated Forecasting System (IFS) of the European Centre for Medium-Range Weather Forecasts (ECMWF). The IFS now includes modules for chemistry, deposition and emission of reactive gases, aerosols, and greenhouse gases, and the 4-dimensional variational data assimilation scheme makes use of multiple satellite observations of atmospheric composition in addition to meteorological observations. This paper describes the data assimilation setup of the new Composition-IFS (C-IFS) with respect to reactive gases and validates analysis fields of ozone (O3), carbon monoxide (CO), and nitrogen dioxide (NO2) for the year 2008 against independent observations and a control run without data assimilation. The largest improvement in CO by assimilation of Measurements of Pollution in the Troposphere (MOPITT) CO columns is seen in the lower troposphere of the Northern Hemisphere (NH) extratropics during winter, and during the South African biomass-burning season. The assimilation of several O3 total column and stratospheric profile retrievals greatly improves the total column, stratospheric and upper tropospheric O3 analysis fields relative to the control run. The impact on lower tropospheric ozone, which comes from the residual of the total column and stratospheric profile O3 data, is smaller, but nevertheless there is some improvement particularly in the NH during winter and spring. The impact of the assimilation of tropospheric NO2 columns from the Ozone Monitoring Instrument (OMI) is small because of the short lifetime of NO2, suggesting that NO2 observations would be better used to adjust emissions instead of initial conditions. The results further indicate that the quality of the tropospheric analyses and of the stratospheric ozone analysis obtained with the C-IFS system has improved compared to the previous "coupled" model system of MACC.

Atmospheric profiles of the optical aerosol properties through the retrieved backscattering or extinction coefficients by lidar measurements can improve drastically the MACC-II aerosol model performances on vertical dimension. Currently the MODIS Aerosol Optical Depth data (both from Terra and Aqua) are assimilated into the model. Being a columnintegrated quantity, these data do not modify the model aerosol vertical profile, especially if the aerosols are not interactive with the meteorology. Since 1999, the MPLNET lidar network provides continuously lidar data measurements from worldwide permanent stations (currently 21), deployed from the Arctic to the Antarctic regions and in tropical and equatorial zones. The purpose of this study is to show the first preliminary results of the intercomparison of MPLNET lidar data against the ECWMF MACC-II aerosol model, for a selected MPLNET permanent observational site at National Central University of Taiwan. Assessing the model performances it is the first step for future near-real time lidar data assimilation into MACC-II aerosol model forecast.

An eight-year long reanalysis of atmospheric composition data covering the period 2003-2010 was constructed as part of the FP7-funded Monitoring Atmospheric Composition and Climate project by assimilating satellite data into a global model and data assimilation system. This reanalysis provides fields of chemically reactive gases, namely carbon monoxide, ozone, nitrogen oxides, and formaldehyde, as well as aerosols and greenhouse gases globally at a horizontal resolution of about 80 km for both the troposphere and the stratosphere. This paper describes the assimilation system for the reactive gases and presents validation results for the reactive gas analysis fields to document the data set and to give a first indication of its quality. Tropospheric CO values from the MACC reanalysis are on average 10-20% lower than routine observations from commercial aircrafts over airports through most of the troposphere, and have larger negative biases in the boundary layer at urban sites affected by air pollution, possibly due to an underestimation of CO or precursor emissions. Stratospheric ozone fields from the MACC reanalysis agree with ozonesondes and ACE-FTS data to within ±10% in most seasons and regions. In the troposphere the reanalysis shows biases of -5% to +10% with respect to ozonesondes and aircraft data in the extratropics, but has larger negative biases in the tropics. Area-averaged total column ozone agrees with ozone fields from a multi-sensor reanalysis data set to within a few percent. NO2 fields from the reanalysis show the right seasonality over polluted urban areas of the NH and over tropical biomass burning areas, but underestimate wintertime NO2 maxima over anthropogenic pollution regions and overestimate NO2 in northern and southern Africa during the tropical biomass burning seasons. Tropospheric HCHO is well simulated in the MACC reanalysis even though no satellite data are assimilated. It shows good agreement with independent SCIAMACHY retrievals over regions dominated by biogenic emissions with some anthropogenic input, such as the eastern US and China, and also over African regions influenced by biogenic sources and biomass burning. © Author(s) 2013., SCOPUS: re.j, info:eu-repo/semantics/published

[1] This study presents the new aerosol assimilation system, developed at the European Centre for Medium-Range Weather Forecasts, for the Global and regional Earth-system Monitoring using Satellite and in-situ data (GEMS) project. The aerosol modeling and analysis system is fully integrated in the operational four-dimensional assimilation apparatus. Its purpose is to produce aerosol forecasts and reanalyses of aerosol fields using optical depth data from satellite sensors. This paper is the second of a series which describes the GEMS aerosol effort. It focuses on the theoretical architecture and practical implementation of the aerosol assimilation system. It also provides a discussion of the background errors and observations errors for the aerosol fields, and presents a subset of results from the 2-year reanalysis which has been run for 2003 and 2004 using data from the Moderate Resolution Imaging Spectroradiometer on the Aqua and Terra satellites. Independent data sets are used to show that despite some compromises that have been made for feasibility reasons in regards to the choice of control variable and error characteristics, the analysis is very skillful in drawing to the observations and in improving the forecasts of aerosol optical depth.

International audience; This paper presents the aerosol modeling now part of the ECMWF Integrated Forecasting System (IFS). It includes new prognostic variables for the mass of sea salt, dust, organic matter and black carbon, and sulphate aerosols, interactive with both the dynamics and the physics of the model. It details the various parameterizations used in the IFS to account for the presence of tropospheric aerosols. Details are given of the various formulations and data sets for the sources of the different aerosols and of the parameterizations describing their sinks. Comparisons of monthly mean and daily aerosol quantities like optical depths against satellite and surface observations are presented. The capability of the forecast model to simulate aerosol events is illustrated through comparisons of dust plume events. The ECMWF IFS provides a good description of the horizontal distribution and temporal variability of the main aerosol types. The forecastonly model described here generally gives the total aerosol optical depth within 0.12 of the relevant observations and can therefore provide the background trajectory information for the aerosol assimilation system described in part 2 of this paper.

We present the first real‐time system for the estimation of global biomass burning emissions from several different satellite‐based fire radiative power (FRP) observations. The FRP products from the MODIS and SEVIRI instruments on Aqua, Terra, and Meteosat‐9 are combined by averaging all pixels with fire detection or just the potential of fire detection on a global grid with ∼125 km resolution. The total observed area per grid cell is used as a proxy for the accuracy of the estimation. Thus the different observations can be merged consistently and the advantage the high temporal sampling frequency of the geostationary observation is maintained while almost global coverage is achieved with the polar orbiting platforms. The system is being tested and validation is ongoing. As a first trial application, daily pyrogenic carbon monoxide emissions are used in the European GEMS project to produce 3‐day forecasts of the carbon monoxide plumes emitted by biomass burning. Some potential improvements of the method a...