Search

We present new Galactic reddening maps of the high Galactic latitude sky using DESI imaging and spectroscopy. We directly measure the reddening of 2.6 million stars by comparing the observed stellar colors in $g-r$ and $r-z$ from DESI imaging with the synthetic colors derived from DESI spectra from the first two years of the survey. The reddening in the two colors is on average consistent with the \cite{fitzpatrick_correcting_1999} extinction curve with $R_\mathrm{V}=3.1$. We find that our reddening maps differ significantly from the commonly used \cite{schlegel_maps_1998} (SFD) reddening map (by up to 80 mmag in $E(B-V)$), and we attribute most of this difference to systematic errors in the SFD map. To validate the reddening map, we select a galaxy sample with extinction correction based on our reddening map, and this yields significantly better uniformity than the SFD extinction correction. Finally, we discuss the potential systematic errors in the DESI reddening measurements, including the photometric calibration errors that are the limiting factor on our accuracy. The $E(g-r)$ and $E(g-r)$ maps presented in this work, and for convenience their corresponding $E(B-V)$ maps with SFD calibration, are publicly available., Comment: Submitted to the Open Journal of Astrophysics. Associated data files: https://data.desi.lbl.gov/public/papers/mws/desi_dust/y2/v1/maps/

We present ~ 126 new spectroscopically identified members of the GD-1 tidal stream obtained with the 5000-fiber Dark Energy Spectroscopic Instrument (DESI). We confirm the existence of a ``cocoon'' which is broad (FWHM~2.932deg~460pc) and kinematically hot (velocity dispersion, sigma~5-8km/s) component that surrounds a narrower (FWHM~0.353deg~55pc) and colder (sigma~ 2.2-2.6km/s) thin stream component (based on a median per star velocity precision of 2.7km/s). The cocoon extends over at least a ~ 20deg segment of the stream observed by DESI. The thin and cocoon components have similar mean values of [Fe/H]: -2.54+/- 0.04dex and -2.45+/-0.06dex suggestive of a common origin. The data are consistent with the following scenarios for the origin of the cocoon. The progenitor of the GD-1 stream was an accreted globular cluster (GC) and: (a) the cocoon was produced by pre-accretion tidal stripping of the GC while it was still inside its parent dwarf galaxy; (b) the cocoon is debris from the parent dwarf galaxy; (c) an initially thin GC tidal stream was heated by impacts from dark subhalos in the Milky Way; (d) an initially thin GC stream was heated by a massive Sagittarius dwarf galaxy; or a combination of some these. In the first two cases the velocity dispersion and mean metallicity are consistent with the parent dwarf galaxy having a halo mass of ~0^9\msun. Future DESI spectroscopy and detailed modeling may enable us to distinguish between these possible origins., Comment: Submitted to ApJ, 23 pages, 13 figures 4 tables

Dark Energy Spectroscopic Instrument (DESI) uses more than 2.4 million Emission Line Galaxies (ELGs) for 3D large-scale structure (LSS) analyses in its Data Release 1 (DR1). Such large statistics enable thorough research on systematic uncertainties. In this study, we focus on spectroscopic systematics of ELGs. The redshift success rate ($f_{\rm goodz}$) is the relative fraction of secure redshifts among all measurements. It depends on observing conditions, thus introduces non-cosmological variations to the LSS. We, therefore, develop the redshift failure weight ($w_{\rm zfail}$) and a per-fibre correction ($\eta_{\rm zfail}$) to mitigate these dependences. They have minor influences on the galaxy clustering. For ELGs with a secure redshift, there are two subtypes of systematics: 1) catastrophics (large) that only occur in a few samples; 2) redshift uncertainty (small) that exists for all samples. The catastrophics represent 0.26\% of the total DR1 ELGs, composed of the confusion between O\,\textsc{ii} and sky residuals, double objects, total catastrophics and others. We simulate the realistic 0.26\% catastrophics of DR1 ELGs, the hypothetical 1\% catastrophics, and the truncation of the contaminated $1.31

We use the forward modeling pipeline, Obiwan, to study the imaging systematics of the Luminous Red Galaxies (LRGs) targeted by the Dark Energy Spectroscopic Instrument (DESI). We update the Obiwan pipeline, which had previously been developed to simulate the optical images used to target DESI data, to further simulate WISE images in the infrared. This addition makes it possible to simulate the DESI LRGs sample, which utilizes WISE data in the target selection. Deep DESI imaging data combined with a method to account for biases in their shapes is used to define a truth sample of potential LRG targets. We simulate a total of 15 million galaxies to obtain a simulated LRG sample (Obiwan LRGs) that predicts the variations in target density due to imaging properties. We find that the simulations predict the trends with depth observed in the data, including how they depend on the intrinsic brightness of the galaxies. We observe that faint LRGs are the main contributing power of the imaging systematics trend induced by depth. We also find significant trends in the data against Galactic extinction that are not predicted by Obiwan. These trends depend strongly on the particular map of Galactic extinction chosen to test against, implying Large-Scale Structure systematic contamination (e.g. Cosmic-Infrared Background) in the Galactic extinction maps is a likely root cause. We additionally observe that the DESI LRGs sample exhibits a complex dependency on a combination of seeing, depth, and intrinsic galaxy brightness, which is not replicated by Obiwan, suggesting discrepancies between the current simulation settings and the actual observations. The detailed findings we present should be used to guide any observational systematics mitigation treatment for the clustering of the DESI LRG sample., Comment: 46 pages, 26 figures

Broad absorption line quasars (BALs) exhibit blueshifted absorption relative to a number of their prominent broad emission features. These absorption features can contribute to quasar redshift errors and add absorption to the Lyman-alpha (LyA) forest that is unrelated to large-scale structure. We present a detailed analysis of the impact of BALs on the Baryon Acoustic Oscillation (BAO) results with the LyA forest from the first year of data from the Dark Energy Spectroscopic Instrument (DESI). The baseline strategy for the first year analysis is to mask all pixels associated with all BAL absorption features that fall within the wavelength region used to measure the forest. We explore a range of alternate masking strategies and demonstrate that these changes have minimal impact on the BAO measurements with both DESI data and synthetic data. This includes when we mask the BAL features associated with emission lines outside of the forest region to minimize their contribution to redshift errors. We identify differences in the properties of BALs in the synthetic datasets relative to the observational data, as well as use the synthetic observations to characterize the completeness of the BAL identification algorithm, and demonstrate that incompleteness and differences in the BALs between real and synthetic data also do not impact the BAO results for the LyA forest., Comment: 32 pages, 8 figures, accepted by JCAP

We present the Lyman-$\alpha$ Continuum Analysis Network (LyCAN), a Convolutional Neural Network that predicts the unabsorbed quasar continuum within the rest-frame wavelength range of $1040-1600$ Angstroms based on the red side of the Lyman-$\alpha$ emission line ($1216-1600$ Angstroms). We developed synthetic spectra based on a Gaussian Mixture Model representation of Nonnegative Matrix Factorization (NMF) coefficients. These coefficients were derived from high-resolution, low-redshift ($z<0.2$) Hubble Space Telescope/Cosmic Origins Spectrograph quasar spectra. We supplemented this COS-based synthetic sample with an equal number of DESI Year 5 mock spectra. LyCAN performs extremely well on testing sets, achieving a median error in the forest region of 1.5% on the DESI mock sample, 2.0% on the COS-based synthetic sample, and 4.1% on the original COS spectra. LyCAN outperforms Principal Component Analysis (PCA)- and NMF-based prediction methods using the same training set by 40% or more. We predict the intrinsic continua of 83,635 DESI Year 1 spectra in the redshift range of $2.1 \leq z \leq 4.2$ and perform an absolute measurement of the evolution of the effective optical depth. This is the largest sample employed to measure the optical depth evolution to date. We fit a power-law of the form $\tau(z) = \tau_0 (1+z)^\gamma$ to our measurements and find $\tau_0 = (2.46 \pm 0.14)\times10^{-3}$ and $\gamma = 3.62 \pm 0.04$. Our results show particular agreement with high-resolution, ground-based observations around $z = 2$, indicating that LyCAN is able to predict the quasar continuum in the forest region with only spectral information outside the forest., Comment: 23 pages, 15 figures, 3 tables; accepted to ApJ

The extraplanar diffuse ionized gas (eDIG) represents ionized gases traced by optical/UV lines beyond the stellar extent of galaxies. We herein introduce a novel multi-slit narrow-band spectroscopy method to conduct spatially resolved spectroscopy of the eDIG around a sample of nearby edge-on disk galaxies (eDIG-CHANGES). In this paper, we introduce the project design and major scientific goals, as well as a pilot study of NGC 3556 (M108). The eDIG is detected to a vertical extent of a few kpc above the disk, comparable to the X-ray and radio images. We do not see significant vertical variation of the [N II]/H$\alpha$ line ratio. A rough examination of the pressure balance between different circum-galactic medium (CGM) phases indicates the magnetic field is in a rough pressure balance with the X-ray emitting hot gas, and may play an important role in the global motion of both the eDIG and the hot gas in the lower halo. At the location of an HST/COS observed UV bright background AGN $\sim29\rm~kpc$ from the center of NGC 3556, the magnetic pressure is much lower than that of the hot gas and the ionized gas traced by UV absorption lines, although the extrapolation of the pressure profiles may cause some biases in this comparison. By comparing the position-velocity diagrams of the optical and CO lines, we also find the dynamics of the two gas phases are consistent with each other, with no evidence of a global inflow/outflow and a maximum rotation velocity of $\sim150\rm~km~s^{-1}$., Comment: 19 pages, 9 figures, 1 table, accepted for publication in ApJ

The first year of data from the Dark Energy Spectroscopic Instrument (DESI) contains the largest set of Lyman-$\alpha$ (Ly$\alpha$) forest spectra ever observed. This data, collected in the DESI Data Release 1 (DR1) sample, has been used to measure the Baryon Acoustic Oscillation (BAO) feature at redshift $z=2.33$. In this work, we use a set of 150 synthetic realizations of DESI DR1 to validate the DESI 2024 Ly$\alpha$ forest BAO measurement. The synthetic data sets are based on Gaussian random fields using the log-normal approximation. We produce realistic synthetic DESI spectra that include all major contaminants affecting the Ly$\alpha$ forest. The synthetic data sets span a redshift range $1.8

High-quality Extragalactic Legacy-field Monitoring (HELM) is a long-term observing program that photometrically monitors several well-studied extragalactic legacy fields with the Dark Energy Camera (DECam) imager on the CTIO 4m Blanco telescope. Since Feb 2019, HELM has been monitoring regions within COSMOS, XMM-LSS, CDF-S, S-CVZ, ELAIS-S1, and SDSS Stripe 82 with few-day cadences in the $(u)gri(z)$ bands, over a collective sky area of $\sim 38$ deg${\rm ^2}$. The main science goal of HELM is to provide high-quality optical light curves for a large sample of active galactic nuclei (AGNs), and to build decades-long time baselines when combining past and future optical light curves in these legacy fields. These optical images and light curves will facilitate the measurements of AGN reverberation mapping lags, as well as studies of AGN variability and its dependences on accretion properties. In addition, the time-resolved and coadded DECam photometry will enable a broad range of science applications from galaxy evolution to time-domain science. We describe the design and implementation of the program and present the first data release that includes source catalogs and the first $\sim 3.5$ years of light curves during 2019A--2022A., Comment: 11 pages, 8 figures, 4 tables, submitted to ApJS. Median source catalogs and light curves of individual objects are publicly available at https://ariel.astro.illinois.edu/helm/

We present new observations of the central 1 kpc of the M 82 starburst obtained with the James Webb Space Telescope (JWST) near-infrared camera (NIRCam) instrument at a resolution ~0.05"-0.1" (~1-2 pc). The data comprises images in three mostly continuum filters (F140M, F250M, and F360M), and filters that contain [FeII] (F164N), H2 v=1-0 (F212N), and the 3.3 um PAH feature (F335M). We find prominent plumes of PAH emission extending outward from the central starburst region, together with a network of complex filamentary substructure and edge-brightened bubble-like features. The structure of the PAH emission closely resembles that of the ionized gas, as revealed in Paschen alpha and free-free radio emission. We discuss the origin of the structure, and suggest the PAHs are embedded in a combination of neutral, molecular, and photoionized gas., Comment: Submitted to The Astrophysical Journal

We have studied the stability of C$_{59}$ anions as a function of time, from their formation on femtosecond timescales to their stabilization on second timescales and beyond, using a combination of theory and experiments. The C$_{59}^-$ fragments were produced in collisions between C$_{60}$ fullerene anions and neutral helium gas at a velocity of 90 km/s (corresponding to a collision energy of 166 eV in the center-of-mass frame). The fragments were then stored in a cryogenic ion-beam storage ring at the DESIREE facility where they were followed for up to one minute. Classical molecular dynamics simulations were used to determine the reaction cross section and the excitation energy distributions of the products formed in these collisions. We found that about 15 percent of the C$_{59}^-$ ions initially stored in the ring are intact after about 100 ms, and that this population then remains intact indefinitely. This means that C$_{60}$ fullerenes exposed to energetic atoms and ions, such as stellar winds and shock waves, will produce stable, highly reactive products, like C$_{59}$, that are fed into interstellar chemical reaction networks., Comment: 11 pages, 8 figures

The Dark Energy Spectroscopic Instrument, consisting of 5020 robotic fiber positioners and associated systems on the Mayall telescope at Kitt Peak, Arizona, is carrying out a survey to measure the spectra of 40 million galaxies and quasars and produce the largest 3D map of the universe to date. The primary science goal is to use baryon acoustic oscillations to measure the expansion history of the universe and the time evolution of dark energy. A key function of the online control system is to position each fiber on a particular target in the focal plane with an accuracy of 11$\mu$m rms 2-D. This paper describes the set of software programs used to perform this function along with the methods used to validate their performance., Comment: 27 pages, 16 figures

The one-dimensional power spectrum $P_{\mathrm{1D}}$ of the Ly$\alpha$ forest provides important information about cosmological and astrophysical parameters, including constraints on warm dark matter models, the sum of the masses of the three neutrino species, and the thermal state of the intergalactic medium. We present the first measurement of $P_{\mathrm{1D}}$ with the quadratic maximum likelihood estimator (QMLE) from the Dark Energy Spectroscopic Instrument (DESI) survey early data sample. This early sample of $54~600$ quasars is already comparable in size to the largest previous studies, and we conduct a thorough investigation of numerous instrumental and analysis systematic errors to evaluate their impact on DESI data with QMLE. We demonstrate the excellent performance of the spectroscopic pipeline noise estimation and the impressive accuracy of the spectrograph resolution matrix with two-dimensional image simulations of raw DESI images that we processed with the DESI spectroscopic pipeline. We also study metal line contamination and noise calibration systematics with quasar spectra on the red side of the Ly$\alpha$ emission line. In a companion paper, we present a similar analysis based on the Fast Fourier Transform estimate of the power spectrum. We conclude with a comparison of these two approaches and implications for the upcoming DESI Year 1 analysis., Comment: 23 pages, 20 figures. To be published in MNRAS

We present the first comprehensive Halo Occupation Distribution (HOD) analysis of the DESI One-Percent survey Luminous Red Galaxy (LRG) and Quasi-Stellar Object (QSO) samples. We constrain the HOD of each sample and test possible HOD extensions by fitting the redshift-space galaxy 2-point correlation functions in 0.15 < r < 32 Mpc/h in a set of fiducial redshift bins. We use AbacusSummit cubic boxes at Planck 2018 cosmology as model templates and forward model galaxy clustering with the AbacusHOD package. We achieve good fits with a standard HOD model with velocity bias, and we find no evidence for galaxy assembly bias or satellite profile modulation at the current level of statistical uncertainty. For LRGs in 0.4 < z < 0.6, we infer a satellite fraction of fsat = 11+-1%, a mean halo mass of log10 Mh = 13.40+0.02-0.02, and a linear bias of blin = 1.93+0.06-0.04. For LRGs in 0.6 < z < 0.8, we find fsat = 14+-1%, log10 Mh = 13.24+0.02-0.02, and blin = 2.08+0.03-0.03. For QSOs, we infer fsat = 3+8-2%, log10 Mh = 12.65+0.09-0.04, and blin = 2.63+0.37-0.26 in redshift range 0.8 < z < 2.1. Using these fits, we generate a large suite of high-fidelity galaxy mocks. We also study the redshift-evolution of the DESI LRG sample from z = 0.4 up to z = 1.1, revealing significant and interesting trends in mean halo mass, linear bias, and satellite fraction., Comment: Submitted to MNRAS, comments welcome

We present the one-dimensional Lyman-$\alpha$ forest power spectrum measurement using the first data provided by the Dark Energy Spectroscopic Instrument (DESI). The data sample comprises $26,330$ quasar spectra, at redshift $z > 2.1$, contained in the DESI Early Data Release and the first two months of the main survey. We employ a Fast Fourier Transform (FFT) estimator and compare the resulting power spectrum to an alternative likelihood-based method in a companion paper. We investigate methodological and instrumental contaminants associated to the new DESI instrument, applying techniques similar to previous Sloan Digital Sky Survey (SDSS) measurements. We use synthetic data based on log-normal approximation to validate and correct our measurement. We compare our resulting power spectrum with previous SDSS and high-resolution measurements. With relatively small number statistics, we successfully perform the FFT measurement, which is already competitive in terms of the scale range. At the end of the DESI survey, we expect a five times larger Lyman-$\alpha$ forest sample than SDSS, providing an unprecedented precise one-dimensional power spectrum measurement., Comment: 23 pages, 23 figures, Journal version

The Dark Energy Spectroscopic Instrument (DESI) is currently measuring the spectra of 40\,million galaxies and quasars, the largest such survey ever made to probe the nature of cosmological dark energy. The 4-meter Mayall telescope at Kitt Peak National Observatory has been adapted for DESI, including the construction of a 3.2-degree diameter prime focus corrector that focuses astronomical light onto a 0.8-meter diameter focal surface with excellent image quality over the DESI bandpass of 360-980nm. The wide-field corrector includes six lenses, as large as 1.1-meters in diameter and as heavy as 237\,kilograms, including two counter-rotating wedged lenses that correct for atmospheric dispersion over Zenith angles from 0 to 60 degrees. The lenses, cells, and barrel assembly all meet precise alignment tolerances on the order of tens of microns. The barrel alignment is maintained throughout a range of observing angles and temperature excursions in the Mayall dome by use of a hexapod, which is itself supported by a new cage, ring, and truss structure. In this paper we describe the design, fabrication, and performance of the new corrector and associated structure, focusing on how they meet DESI requirements. In particular we describe the prescription and specifications of the lenses, design choices and error budgeting of the barrel assembly, stray light mitigations, and integration and test at the Mayall telescope. We conclude with some validation highlights that demonstrate the successful corrector on-sky performance, and list some lessons learned during the multi-year fabrication phase., Comment: 68 pages, 56 figures, 22 tables. Submitted to the Astronomical Journal

Millions of quasar spectra will be collected by the Dark Energy Spectroscopic Instrument (DESI), leading to a four-fold increase in the number of known quasars. High accuracy quasar classification is essential to tighten constraints on cosmological parameters measured at the highest redshifts DESI observes ($z>2.0$). We present the spectral templates for identification and redshift estimation of quasars in the DESI Year 1 data release. The quasar templates are comprised of two quasar eigenspectra sets, trained on spectra from the Sloan Digital Sky Survey. The sets are specialized to reconstruct quasar spectral variation observed over separate yet overlapping redshift ranges and, together, are capable of identifying DESI quasars from $0.05 < z <7.0$. The new quasar templates show significant improvement over the previous DESI quasar templates regarding catastrophic failure rates, redshift precision and accuracy, quasar completeness, and the contamination fraction in the final quasar sample., Comment: to be published in Astronomical Journal; 21 pages, 8 figures

We detect the cross-correlation between 2.7 million DESI quasar targets across 14,700 deg$^2$ (180 quasars deg$^{-2}$) and Planck 2018 CMB lensing at $\sim$30$\sigma$. We use the cross-correlation on very large scales to constrain local primordial non-Gaussianity via the scale dependence of quasar bias. The DESI quasar targets lie at an effective redshift of 1.51 and are separated into four imaging regions of varying depth and image quality. We select quasar targets from Legacy Survey DR9 imaging, apply additional flux and photometric redshift cuts to improve the purity and reduce the fraction of unclassified redshifts, and use early DESI spectroscopy of 194,000 quasar targets to determine their redshift distribution and stellar contamination fraction (2.6%). Due to significant excess large-scale power in the quasar autocorrelation, we apply weights to mitigate contamination from imaging systematics such as depth, extinction, and stellar density. We use realistic contaminated mocks to determine the greatest number of systematic modes that we can fit, before we are biased by overfitting and spuriously remove real power. We find that linear regression with one to seven imaging templates removed per region accurately recovers the input cross-power, $f_{\textrm{NL}}$ and linear bias. As in previous analyses, our $f_{\textrm{NL}}$ constraint depends on the linear primordial non-Gaussianity bias parameter, $b_{\phi} = 2(b - p)\delta_c$ assuming universality of the halo mass function. We measure $f_{\textrm{NL}} = -26^{+45}_{-40}$ with $p=1.6$ $(f_{\textrm{NL}} = -18^{+29}_{-27}$ with $p=1.0$), and find that this result is robust under several systematics tests. Future spectroscopic quasar cross-correlations with Planck lensing lensing can tighten the $f_{\textrm{NL}}$ constraints by a factor of 2 if they can remove the excess power on large scales in the quasar auto power spectrum., Comment: 57 pages, 25 figures, updated to match accepted version

We present the first detection of the baryon acoustic oscillations (BAO) signal obtained using unblinded data collected during the initial two months of operations of the Stage-IV ground-based Dark Energy Spectroscopic Instrument (DESI). From a selected sample of 261,291 Luminous Red Galaxies spanning the redshift interval 0.4 < z < 1.1 and covering 1651 square degrees with a 57.9% completeness level, we report a ~5 sigma level BAO detection and the measurement of the BAO location at a precision of 1.7%. Using a Bright Galaxy Sample of 109,523 galaxies in the redshift range 0.1 < z < 0.5, over 3677 square degrees with a 50.0% completeness, we also detect the BAO feature at ~3 sigma significance with a 2.6% precision. These first BAO measurements represent an important milestone, acting as a quality control on the optimal performance of the complex robotically-actuated, fiber-fed DESI spectrograph, as well as an early validation of the DESI spectroscopic pipeline and data management system. Based on these first promising results, we forecast that DESI is on target to achieve a high-significance BAO detection at sub-percent precision with the completed 5-year survey data, meeting the top-level science requirements on BAO measurements. This exquisite level of precision will set new standards in cosmology and confirm DESI as the most competitive BAO experiment for the remainder of this decade., Comment: 17 pages, 10 figures, 4 tables. MNRAS, 525, 5406. Author accepted manuscript matching the published version

Accurate quasar classifications and redshift measurements are increasingly important to precision cosmology experiments. Broad absorption line (BAL) features are present in 15-20\% of all quasars, and these features can introduce systematic redshift errors, and in extreme cases produce misclassifications. We quantitatively investigate the impact of BAL features on quasar classifications and redshift measurements with synthetic spectra that were designed to match observations by the Dark Energy Spectroscopic Instrument (DESI) survey. Over the course of five years, DESI aims to measure spectra for 40 million galaxies and quasars, including nearly three million quasars. Our synthetic quasar spectra match the signal-to-noise ratio and redshift distributions of the first year of DESI observations, and include the same synthetic quasar spectra both with and without BAL features. We demonstrate that masking the locations of the BAL features decreases the redshift errors by about 1\% and reduces the number of catastrophic redshift errors by about 80\%. We conclude that identifying and masking BAL troughs should be a standard part of the redshift determination step for DESI and other large-scale spectroscopic surveys of quasars., Comment: 12 pages, 9 figures, submitted to MNRAS

The abundance, temperature, and clustering of metals in the intergalactic medium are important parameters for understanding their cosmic evolution and quantifying their impact on cosmological analysis with the Ly $\alpha$ forest. The properties of these systems are typically measured from individual quasar spectra redward of the quasar's Ly $\alpha$ emission line, yet that approach may provide biased results due to selection effects. We present an alternative approach to measure these properties in an unbiased manner with the two-point statistics commonly employed to quantify large-scale structure. Our model treats the observed flux of a large sample of quasar spectra as a continuous field and describes the one-dimensional, two-point statistics of this field with three parameters per ion: the abundance (column density distribution), temperature (Doppler parameter) and clustering (cloud-cloud correlation function). We demonstrate this approach on multiple ions (e.g., C IV, Si IV, Mg II) with early data from the Dark Energy Spectroscopic Instrument (DESI) and high-resolution spectra from the literature. Our initial results show some evidence that the C IV abundance is higher than previous measurements and evidence for abundance evolution over time. The first full year of DESI observations will have over an order of magnitude more quasar spectra than this study. In a future paper we will use those data to measure the growth of clustering and its impact on the Ly $\alpha$ forest, as well as test other DESI analysis infrastructure such as the pipeline noise estimates and the resolution matrix., Comment: 15 pages, 14 figures, accepted to MNRAS

We report the first results of a high-redshift ($z$ >~ 5) quasar survey using the Dark Energy Spectroscopic Instrument (DESI). As a DESI secondary target program, this survey is designed to carry out a systematic search and investigation of quasars at $z$ >~ 5, up to redshift 6.8. The target selection is based on the DESI Legacy Imaging Surveys (the Legacy Surveys) DR9 photometry, combined with the Pan-STARRS1 data and $J$-band photometry from public surveys. A first quasar sample has been constructed from the DESI Survey Validation 3 (SV3) and first-year observations until May 2022. This sample includes more than 400 new quasars at redshift 4.7 <= $z$ < 6.6, down to 21.5 magnitude in the $z$ band, discovered from 35% of the entire target sample. Remarkably, there are 220 new quasars identified at $z$ >= 5, more than one third of existing quasars previously published at this redshift. The observations so far result in an average success rate of 23% at $z$ > 4.7. The current spectral dataset has already allowed analysis of interesting individual objects (e.g., quasars with damped Ly$\alpha$ absorbers and broad absorption line features), and statistical analysis will follow the survey's completion. A set of science projects will be carried out leveraging this program, including quasar luminosity function, quasar clustering, intergalactic medium, quasar spectral properties, intervening absorbers, and properties of early supermassive black holes. Additionally, a sample of 38 new quasars at $z$ ~ 3.8-5.7 discovered from a pilot survey in the DESI SV1 is also published in this paper., Comment: 28 pages, 9 figures, and 2 tables; Published in ApJS

We use a novel technique to solvate silver cations in small clusters of noble gases. The technique involves formation of large, superfluid helium nanodroplets that are subsequently electron ionized, mass-selected by deflection in an electric field, and doped with silver atoms and noble gases (Ng) in pickup cells. Excess helium is then stripped from the doped nanodroplets by multiple collisions with helium gas at room temperature, producing cluster ions that contain no more than a few dozen noble gas atoms and just a few (or no) silver atoms. Under gentle stripping conditions helium atoms remain attached to the cluster ions, demonstrating their low vibrational temperature. Under harsher stripping conditions some of the heavier noble gas atoms will be evaporated as well, thus enriching stable clusters Ng$_n$Ag$_m^+$ at the expense of less stable ones. This results in local anomalies in the cluster ion abundance which is measured in a high-resolution time-of-flight mass spectrometer. Based on these data we identify specific "magic" sizes n of particularly stable ions. There is no evidence though for enhanced stability of Ng$_2$Ag$^+$, in contrast to the high stability of Ng$_2$Au$^+$ that derives from the covalent nature of the bond for heavy noble gases. "Magic" sizes are also identified for Ag$_2^+$ dimer ions complexed with He or Kr. Structural models will be tentatively proposed. A sequence of magic numbers $n$ = 12, 32, 44, indicative of three concentric solvation shells of icosahedral symmetry, is observed for He$_n$H$_2$O$^+$.

High-resolution mass spectra of helium droplets doped with gold and ionized by electrons reveal He$_n$Au$^+$ cluster ions. Additional doping with heavy noble gases results in NenAu+, Ar$_n$Au$^+$, Kr$_n$Au$^+$, and Xe$_n$Au$^+$ cluster ions. The high stability predicted for covalently bonded Ar$_2$Au$^+$, Kr$_2$Au$^+$, and Xe$_2$Au$^+$ is reflected in their relatively high abundance. Surprisingly, the abundance of Ne$_2$Au$^+$ which is predicted to have zero covalent bonding character and no enhanced stability features a local maximum, too. The predicted size and structure of complete solvation shells surrounding ions with essentially non-directional bonding depends primarily on the ratio $\sigma$* of the ion-ligand $versus$ the ligand-ligand distance. For Au$^+$ solvated in helium and neon the ratio $\sigma$* is slightly below 1, favoring icosahedral packing in agreement with a maximum observed in the corresponding abundance distributions at $n$ = 12. He$_n$Au$^+$ appears to adopt two additional solvation shells of $I_h$ symmetry, containing 20 and 12 atoms, respectively. For Ar$_n$Au$^+$, with $\sigma$* $\approx$ 0.67, one would expect a solvation shell of octahedral symmetry, in agreement with an enhanced ion abundance at $n$ = 6. Another anomaly in the ion abundance at Ar$_9$Au$^+$ matches a local maximum in its computed dissociation energy.

Positively charged cluster ions of phosphorus were formed upon electron ionization of doped helium nanodroplets. The vapors of red phosphorus and a phosphate sample were picked up into neutral and charged helium nanodroplets. Independent on the conditions used, the cluster size distributions exhibit pronounced odd-even oscillations that are opposite to almost all experimental and theoretical patterns published in the literature. The low temperature environment of the superfluid He matrix quenches fragmentation and the charged phosphorus clusters resemble the structure of the neutral precursors., Comment: 12 pages, 6 figures

We determine the product of the expansion rate and angular-diameter distance at redshift $z=2.3$ from the anisotropy of Lyman-$\alpha$ (Ly$\alpha$) forest correlations measured by the Sloan Digital Sky Survey (SDSS). Our result is the most precise from large-scale structure at $z>1$. In flat $\Lambda$CDM we determine the matter density to be $\Omega_\mathrm{m}=0.36^{+0.03}_{-0.04}$ from Ly$\alpha$ alone. This is a factor of two tighter than baryon acoustic oscillation results from the same data due to our use of a wide range of scales ($25

The three-dimensional distribution of the Ly$\alpha$ forest has been extensively used to constrain cosmology through measurements of the baryon acoustic oscillations (BAO) scale. However, more cosmological information could be extracted from the full shapes of the Ly$\alpha$ forest correlations through the Alcock-Paczy\'nski (AP) effect. In this work, we prepare for a cosmological analysis of the full shape of the Ly$\alpha$ forest correlations by studying synthetic data of the extended Baryon Oscillation Spectroscopic Survey (eBOSS). We use a set of one hundred eBOSS synthetic data sets in order to validate such an analysis. These mocks undergo the same analysis process as the real data. We perform a full-shape analysis on the mean of the correlation functions measured from the one hundred eBOSS realizations, and find that our model of the Ly$\alpha$ correlations performs well on current data sets. We show that we are able to obtain an unbiased full-shape measurement of $D_M/D_H(z_\mathrm{eff})$, where $D_M$ is the transverse comoving distance, $D_H$ is the Hubble distance, and $z_\mathrm{eff}$ is the effective redshift of the measurement. We test the fit over a range of scales, and decide to use a minimum separation of $r_\mathrm{min}=25\ h^{-1}\text{Mpc}$. We also study and discuss the impact of the main contaminants affecting Ly$\alpha$ forest correlations, and give recommendations on how to perform such analysis with real data. While the final eBOSS Ly$\alpha$ BAO analysis measured $D_M/D_H(z_\mathrm{eff}=2.33)$ with $4\%$ statistical precision, a full-shape fit of the same correlations could provide a $\sim2\%$ measurement.

In this white paper, we present the MegaMapper concept. The MegaMapper is a proposed ground-based experiment to measure Inflation parameters and Dark Energy from galaxy redshifts at $2

In this white paper, we present an experimental road map for spectroscopic experiments beyond DESI. DESI will be a transformative cosmological survey in the 2020s, mapping 40 million galaxies and quasars and capturing a significant fraction of the available linear modes up to z=1.2. DESI-II will pilot observations of galaxies both at much higher densities and extending to higher redshifts. A Stage-5 experiment would build out those high-density and high-redshift observations, mapping hundreds of millions of stars and galaxies in three dimensions, to address the problems of inflation, dark energy, light relativistic species, and dark matter. These spectroscopic data will also complement the next generation of weak lensing, line intensity mapping and CMB experiments and allow them to reach their full potential., Comment: Contribution to Snowmass 2021

We present DESI observations of the inner halo of M31, which reveal the kinematics of a recent merger - a galactic immigration event - in exquisite detail. Of the 11,416 sources studied in 3.75 hour of on-sky exposure time, 7,438 are M31 sources with well measured radial velocities. The observations reveal intricate coherent kinematic structure in the positions and velocities of individual stars: streams, wedges, and chevrons. While hints of coherent structures have been previously detected in M31, this is the first time they have been seen with such detail and clarity in a galaxy beyond the Milky Way. We find clear kinematic evidence for shell structures in the Giant Stellar Stream, the Northeast Shelf and Western Shelf regions. The kinematics are remarkably similar to the predictions of dynamical models constructed to explain the spatial morphology of the inner halo. The results are consistent with the interpretation that much of the substructure in the inner halo of M31 is produced by a single galactic immigration event 1 - 2 Gyr ago. Significant numbers of metal-rich stars ([Fe/H]$>-0.5$) are present in all of the detected substructures, suggesting that the immigrating galaxy had an extended star formation history. We also investigate the ability of the shells and Giant Stellar Stream to constrain the gravitational potential of M31, and estimate the mass within a projected radius of 125 kpc to be ${\rm log_{10}}\, M_{\rm NFW}(<125\,{\rm kpc})/M_\odot = 11.80_{-0.10}^{+0.12}$. The results herald a new era in our ability to study stars on a galactic scale and the immigration histories of galaxies., Comment: 45 pages, 22 figures, 8 tables; Astrophysical Journal in press; Data at https://zenodo.org/record/6977494

In 2021 May, the Dark Energy Spectroscopic Instrument (DESI) began a 5 yr survey of approximately 50 million total extragalactic and Galactic targets. The primary DESI dark-time targets are emission line galaxies (ELGs), luminous red galaxies (LRGs) and quasars (QSOs). In bright time, DESI will focus on two surveys known as the Bright Galaxy Survey (BGS) and the Milky Way Survey (MWS). DESI also observes a selection of "secondary" targets for bespoke science goals. This paper gives an overview of the publicly available pipeline (desitarget) used to process targets for DESI observations. Highlights include details of the different DESI survey targeting phases, the targeting ID (TARGETID) used to define unique targets, the bitmasks used to indicate a particular type of target, the data model and structure of DESI targeting files, and examples of how to access and use the desitarget code base. This paper will also describe "supporting" DESI target classes, such as standard stars, sky locations, and random catalogs that mimic the angular selection function of DESI targets. The DESI target selection pipeline is complex and sizable; this paper attempts to summarize the most salient information required to understand and work with DESI targeting data., Comment: AJ, accepted, 27 pages, 4 figures, 10 tables, one of a suite of 8 papers detailing targeting for DESI. Minor textual updates to better match the final, accepted version. Also added two missing co-authors

We describe the Milky Way Survey (MWS) that will be undertaken with the Dark Energy Spectroscopic Instrument (DESI) on the Mayall 4m telescope at the Kitt Peak National Observatory. Over the next 5 yr DESI MWS will observe approximately seven million stars at Galactic latitudes |b|>20 degrees, with an inclusive target selection scheme focused on the thick disk and stellar halo. MWS will also include several high-completeness samples of rare stellar types, including white dwarfs, low-mass stars within 100pc of the Sun, and horizontal branch stars. We summarize the potential of DESI to advance understanding of Galactic structure and stellar evolution. We introduce the final definitions of the main MWS target classes and estimate the number of stars in each class that will be observed. We describe our pipelines for deriving radial velocities, atmospheric parameters, and chemical abundances. We use ~500,000 spectra of unique stellar targets from the DESI Survey Validation program (SV) to demonstrate that our pipelines can measure radial velocities to ~1 km/s and [Fe/H] accurate to ~0.2 dex for typical stars in our main sample. We find the stellar parameter distributions from ~100 sq. deg of SV observations with >90% completeness on our main sample are in good agreement with expectations from mock catalogs and previous surveys., Comment: Accepted for publication in ApJ, 44 pages, 25 figures, 4 tables, one of a suite of 8 papers detailing targeting for DESI; v2 added links to data shown in figures, added citations to other DESI papers, corrected author list and minor typos; v3 fixed minor errors in Fig. 6 and clarified associated text; v4 updated to include minor changes in response to review

Over the next five years, the Dark Energy Spectroscopic Instrument (DESI) will use 10 spectrographs with 5000 fibers on the 4m Mayall Telescope at Kitt Peak National Observatory to conduct the first Stage-IV dark energy galaxy survey. At $z < 0.6$, the DESI Bright Galaxy Survey (BGS) will produce the most detailed map of the Universe during the dark energy dominated epoch with redshifts of >10 million galaxies over 14,000 deg$^2$. In this work, we present and validate the final BGS target selection and survey design. From the Legacy Surveys, BGS will target a $r < 19.5$ magnitude-limited sample (BGS Bright); a fainter $19.5 < r < 20.175$ sample, color-selected to have high redshift efficiency (BGS Faint); and a smaller low-z quasar sample. BGS will observe these targets using exposure times, scaled to achieve uniform completeness, and visit each point on the footprint three times. We use observations from the Survey Validation programs conducted prior to the main survey along with realistic simulations to show that BGS can complete its strategy and make optimal use of `bright' time. We demonstrate that BGS targets have stellar contamination <1% and that their densities do not depend strongly on imaging properties. We also confirm that BGS Bright will achieve >80% fiber assignment efficiency. Finally, we show that BGS Bright and Faint will achieve >95% redshift success rates with no significant dependence on observing conditions. BGS meets the requirements for an extensive range of scientific applications. BGS will yield the most precise Baryon Acoustic Oscillations and Redshift-Space Distortions measurements at $z < 0.4$. It also presents opportunities to exploit new methods that require highly complete and dense galaxy samples (e.g. N-point statistics, multi-tracers). BGS further provides a powerful tool to study galaxy populations and the relations between galaxies and dark matter., Comment: AJ, submitted, 34 pages, 22 figures, one of a suite of 8 papers detailing targeting for DESI

The Dark Energy Spectroscopic Instrument (DESI) survey will measure large-scale structures using quasars as direct tracers of dark matter in the redshift range 0.92.1. We present several methods to select candidate quasars for DESI, using input photometric imaging in three optical bands (g, r, z) from the DESI Legacy Imaging Surveys and two infrared bands (W1, W2) from the Wide-field Infrared Explorer (WISE). These methods were extensively tested during the Survey Validation of DESI. In this paper, we report on the results obtained with the different methods and present the selection we optimized for the DESI main survey. The final quasar target selection is based on a Random Forest algorithm and selects quasars in the magnitude range 16.599% purity for a nominal effective exposure time of ~1000s. With a 310 per sq. deg. target density, the main selection allows DESI to select more than 200 QSOs per sq. deg. (including 60 quasars with z>2.1), exceeding the project requirements by 20%. The redshift distribution of the selected quasars is in excellent agreement with quasar luminosity function predictions., Comment: 21 pages, 21 figures, typos corrected, references added

The correlation between the broad line region radius and continuum luminosity ($R-L$ relation) of active galactic nuclei (AGN) is critical for single-epoch mass estimates of supermassive black holes (SMBHs). At $z \sim 1-2$, where AGN activity peaks, the $R-L$ relation is constrained by the reverberation mapping (RM) lags of the Mg II line. We present 25 Mg II lags from the Australian Dark Energy Survey (OzDES) RM project based on six years of monitoring. We define quantitative criteria to select good lag measurements and verify their reliability with simulations based on both the damped random walk stochastic model and the re-scaled, re-sampled versions of the observed lightcurves of local, well-measured AGN. Our sample significantly increases the number of Mg II lags and extends the $R-L$ relation to higher redshifts and luminosities. The relative iron line strength $\mathcal{R}_{\rm Fe}$ has little impact on the $R-L$ relation. The best-fit Mg II $R-L$ relation has a slope $\alpha = 0.39 \pm 0.08$ with an intrinsic scatter $\sigma_{\rm rl} = 0.15^{+0.03}_{-0.02}$. The slope is consistent with previous measurements and shallower than the H$\beta$ $R-L$ relation. The intrinsic scatter of the new $R-L$ relation is substantially smaller than previous studies and comparable to the intrinsic scatter of the H$\beta$ $R-L$ relation. Our new $R-L$ relation will enable more precise single-epoch mass estimates and SMBH demographic studies at cosmic noon., Comment: 16 pages, 8 figures; MNRAS, Volume 522, pp.4132

A system of 5,020 robotic fiber positioners was installed in 2019 on the Mayall Telescope, at Kitt Peak National Observatory. The robots automatically re-target their optical fibers every 10 - 20 minutes, each to a precision of several microns, with a reconfiguration time less than 2 minutes. Over the next five years, they will enable the newly-constructed Dark Energy Spectroscopic Instrument (DESI) to measure the spectra of 35 million galaxies and quasars. DESI will produce the largest 3D map of the universe to date and measure the expansion history of the cosmos. In addition to the 5,020 robotic positioners and optical fibers, DESI's Focal Plane System includes 6 guide cameras, 4 wavefront cameras, 123 fiducial point sources, and a metrology camera mounted at the primary mirror. The system also includes associated structural, thermal, and electrical systems. In all, it contains over 675,000 individual parts. We discuss the design, construction, quality control, and integration of all these components. We include a summary of the key requirements, the review and acceptance process, on-sky validations of requirements, and lessons learned for future multi-object, fiber-fed spectrographs., Comment: 51 pages, 41 figures

Using synthetic Lyman-$\alpha$ forests from the Dark Energy Spectroscopic Instrument (DESI) survey, we present a study of the impact of errors in the estimation of quasar redshift on the Lyman-$\alpha$ correlation functions. Estimates of quasar redshift have large uncertainties of a few hundred $\text{km s}^{-1}\,$ due to the broadness of the emission lines and the intrinsic shifts from other emission lines. We inject Gaussian random redshift errors into the mock quasar catalogues, and measure the auto-correlation and the Lyman-$\alpha$-quasar cross-correlation functions. We find a smearing of the BAO feature in the radial direction, but changes in the peak position are negligible. However, we see a significant unphysical correlation for small separations transverse to the line of sight which increases with the amplitude of the redshift errors. We interpret this contamination as a result of the broadening of emission lines in the measured mean continuum, caused by quasar redshift errors, combined with the unrealistically strong clustering of the simulated quasars on small scales., Comment: 13 pages, 8 figures, submitted to MNRAS

Contemporary reverberation mapping campaigns are employing wide-area photometric data and high-multiplex spectroscopy to efficiently monitor hundreds of active galactic nuclei (AGN). However, the interaction of the window function(s) imposed by the observation cadence with the reverberation lag and AGN variability time scales (intrinsic to each source over a range of luminosities) impact our ability to recover these fundamental physical properties. Time dilation effects due to the sample source redshift distribution introduces added complexity. We present comprehensive analysis of the implications of observational cadence, seasonal gaps and campaign baseline duration (i.e., the survey window function) for reverberation lag recovery. We find the presence of a significant seasonal gap dominates the efficacy of any given campaign strategy for lag recovery across the parameter space, particularly for those sources with observed-frame lags above 100 days. Using the OzDES survey as a baseline, we consider the implications of this analysis for the 4MOST/TiDES campaign providing concurrent follow-up of the LSST deep-drilling fields, as well as upcoming programs. We conclude that the success of such surveys will be critically limited by the seasonal visibility of some potential field choices, but show significant improvement from extending the baseline. Optimising the sample selection to fit the window function will improve survey efficacy., Comment: 16 pages, 16 figures. Accepted by MNRAS

Correlations in and with the flux transmission of the Lyman$-\alpha$ (Ly$\alpha$) forest in the spectra of high-redshift quasars are powerful cosmological tools, yet these measurements can be compromised if the intrinsic quasar continuum is significantly uncertain. One particularly problematic case is broad absorption line (BAL) quasars, which exhibit blueshifted absorption associated with many spectral features that are consistent with outflows of up to $\sim0.1c$. As these absorption features can both fall in the forest region and be difficult to distinguish from Ly$\alpha$ absorption, cosmological analyses eliminate the 12 - 16% of quasars that exhibit BALs. In this paper we explore an alternate approach that includes BALs in the Ly$\alpha$ auto correlation function, with the exception of the expected locations of the BAL absorption troughs. This procedure returns over 95% of the pathlength that is lost by the exclusion of BALs, as well as increases the density of sightlines. We show that including BAL quasars reduces the fractional uncertainty in the covariance matrix and correlation function and does not significantly change the shape of the correlation function relative to analyses that exclude BAL quasars. We also evaluate different definitions of BALs, masking strategies, and potential differences in the quasar continuum in the forest region for BALs with different amounts of absorption., Comment: 10 pages, 10 figures

Reverberation mapping is a robust method to measure the masses of supermassive black holes (SMBHs) outside of the local Universe. Measurements of the radius -- luminosity ($R-L$) relation using the Mg II emission line are critical for determining these masses near the peak of quasar activity at $z \approx 1 - 2$, and for calibrating secondary mass estimators based on Mg II that can be applied to large samples with only single-epoch spectroscopy. We present the first nine Mg II lags from our five-year Australian Dark Energy Survey (OzDES) reverberation mapping program, which substantially improves the number and quality of Mg II lag measurements. As the Mg II feature is somewhat blended with iron emission, we model and subtract both the continuum and iron contamination from the multi-epoch spectra before analyzing the Mg II line. We also develop a new method of quantifying correlated spectroscopic calibration errors based on our numerous, contemporaneous observations of F-stars. The lag measurements for seven of our nine sources are consistent with both the H$\beta$ and Mg II $R-L$ relations reported by previous studies. Our simulations verify the lag reliability of our nine measurements, and we estimate that the median false positive rate of the lag measurements is $4\%$., Comment: 18 pages, 12 figures. MNRAS, Volume 507, Issue 3, November 2021, Pages 3771-3788

The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. We describe the installation of the major elements of the instrument at the Mayall 4m telescope, completed in late 2019. The previous prime focus corrector, spider vanes, and upper rings were removed from the Mayall's Serrurier truss and replaced with the newly-constructed DESI ring, vanes, cage, hexapod, and optical corrector. The new corrector was optically aligned with the primary mirror using a laser tracker system. The DESI focal plane system was integrated to the corrector, with each of its ten 500-fiber-positioner petal segments installed using custom installation hardware and the laser tracker. Ten DESI spectrographs with 30 cryostats were installed in a newly assembled clean room in the Large Coude Room. The ten cables carrying 5000 optical fibers from the positioners in the focal plane were routed down the telescope through cable wraps at the declination and hour angle axes, and their integral slitheads were integrated with the ten spectrographs. The fiber view camera assembly was installed to the Mayall's primary mirror cell. Servers for the instrument control system replaced existing computer equipment. The fully integrated instrument has been commissioned and is ready to start its operations phase.

The Dark Energy Spectroscopic Instrument (DESI) is an ongoing spectroscopic survey to measure the dark energy equation of state to unprecedented precision. We describe the DESI Sky Continuum Monitor System, which tracks the night sky brightness as part of a system that dynamically adjusts the spectroscopic exposure time to produce more uniform data quality and to maximize observing efficiency. The DESI dynamic exposure time calculator (ETC) will combine sky brightness measurements from the Sky Monitor with data from the guider system to calculate the exposure time to achieve uniform signal-to-noise ratio (SNR) in the spectra under various observing conditions. The DESI design includes 20 sky fibers, and these are split between two identical Sky Monitor units to provide redundancy. Each Sky Monitor unit uses an SBIG STXL-6303e CCD camera and supports an eight-position filter wheel. Both units have been completed and delivered to the Mayall Telescope at the Kitt Peak National Observatory. Commissioning results show that the Sky Monitor delivers the required performance necessary for the ETC., Comment: 9 pages, 7 figures, 1 table

The recently commissioned Dark Energy Spectroscopic Instrument (DESI) will measure the expansion historyof the universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasarsover 14000 sq deg will be measured during the life of the experiment. A new prime focus corrector for theKPNO Mayall telescope delivers light to 5000 fiber optic positioners. The fibers in turn feed ten broad-bandspectrographs. We describe key aspects and lessons learned from the development, delivery and installation ofthe fiber system at the Mayall telescope., Comment: 9 pages