Search

Three environments were chosen for this study (office, metal, and woodworking industries). The results obtained by an electrical low-pressure impactor (ELPI+) in this study show that the particle number concentration and surface area are significantly higher in workplaces of the metal- and wood-working industries but concentrations of mass are lower. Therefore, the characteristics of mass should not be used on their own as a representative parameter for the description of occupational exposure and cannot be used for occupational risk assessment as a single parameter. The nanoparticles ratio together with occupational exposure limits could possibly be used as the background for occupational risk assessment. At the same time, it is essential to mention that the nanoparticle ratio alone is insufficient and parameters like concentration levels, chemical composition, and shape characterization must also be taken into account, especially in occupational toxicology studies done in the future. According to the SEM data, samples from the metal industry contained more ultramicroscopic and nanometric particles (e.g. toxic metals such as Zn, Mn, and Cr) and fewer microscopic dust particles. [ABSTRACT FROM AUTHOR]

Inhalation is the main route of exposure to airborne pollutants. To evaluate the safety and assess the risks of occupational hazards different testing approaches are used. 3D airway epithelial tissues allow to mimic exposure conditions in vitro, generates human-relevant toxicology data, allows to elucidate the mode of action of pollutants. Gillian3500 pumps were used to collect the airborne particulate from woodworking and metalworking environments. EpiAirway tissues were used to model half working day (4 h), full working day (8 h), and 3 working day exposures to occupational pollutants. Tissue viability was assessed using an MTT assay. For preliminary assessment, RT-qPCR analyses were performed to analyze the expression of gelsolin, caspase-3, and IL-6. Tissue morphology was assessed by hematoxylin/eosin staining. An effect on the proliferation of lung epithelial cell line A549 was assessed. Acute exposure to workspace pollutants slightly affected tissue viability and did not change the morphology. No inhibiting effect was observed on the proliferation of A549 cells. Preliminary analysis showed that both types of particles suppressed the expression of gelsolin, with the effect of metalworking samples being more pronounced. A slight reduction in caspase-3 expression was observed. Particles from metalworking suppressed IL-6 expression. [ABSTRACT FROM AUTHOR]

Currently, nanoparticles are widely present in the environment and are being used in various industrial technologies. Nanoparticles affect immune functions, causing different immune responses. The aim of the current study was to evaluate several cytokines, interleukin (IL)-1b, IL-6, IL-8, tumour necrosis factor-a (TNF-α), interferon-γ, adhesive molecule sICAM-1, macrophage inhibitory protein 1a (MIP1a) and secretory immunoglobulin A, in nasal lavage fluid and in the peripheral blood of healthy subjects exposed to workplace nanoparticles. Thirty-six employees from three different environments were examined: 12 from a metalworking company, 12 from a woodworking company and 12 office workers. The nanoparticles in the different workplaces were detected in the air in the immediate vicinity of the employees. The particle number concentration and surface area values were significantly higher in the workplaces of the metal- and woodworking industries, but concentrations of mass were lower (the measurements were performed by an electrical low-pressure impactor ELPI+). Energy dispersive X-ray spectroscopy (EDS, an attachment to a high-resolution SEM) was used to provide elemental analysis or chemical characterization of the dust particles in a low-vacuum field-free mode operating at a potential of 15 kV spot 3.0. The technique used provided quantitative and spatial analyses of the distribution of elements through mapping (two to three parallel measurements) and point analysis (four to five parallel measurements). Samples from the metal industry contained more ultramicroscopic and nanometric particles, e.g. toxic metals such as Zn, Mn and Cr, and fewer microscopic dust particles. The nasal lavage and peripheral blood were taken at the beginning and the end of the working week, when immune indices were measured. Our data showed a statistically significant increased level of the pro-inflammatory cytokine TNF-α in serum in both exposed groups compared with office workers as well as a higher level of TNF-α in workers from the woodworking company compared with the metalworking employees. We found an elevated level of IL-6 in the exposed groups as well as an elevated level of IL-8 in the nasal lavage in woodworking employees after work. [ABSTRACT FROM AUTHOR]

Humans are exposed to a mixture of pesticides through diet as well as through the environment. We conducted a suspect-screening based study to describe the probability of (concomitant) exposure to a set of pesticide profiles in five European countries (Latvia, Hungary, Czech Republic, Spain and the Netherlands). We explored whether living in an agricultural area (compared to living in a peri-urban area), being a a child (compared to being an adult), and the season in which the urine sample was collected had an impact on the probability of detection of pesticides (-metabolites). In total 2088 urine samples were collected from 1050 participants (525 parent-child pairs) and analyzed through harmonized suspect screening by five different laboratories. Fourty pesticide biomarkers (either pesticide metabolites or the parent pesticides as such) relating to 29 pesticides were identified at high levels of confidence in samples across all study sites. Most frequently detected were biomarkers related to the parent pesticides acetamiprid and chlorpropham. Other biomarkers with high detection rates in at least four countries related to the parent pesticides boscalid, fludioxonil, pirimiphos-methyl, pyrimethanil, clothianidin, fluazifop and propamocarb. In 84% of the samples at least two different pesticides were detected. The median number of detected pesticides in the urine samples was 3, and the maximum was 13 pesticides detected in a single sample. The most frequently co-occurring substances were acetamiprid with chlorpropham (in 62 urine samples), and acetamiprid with tebuconazole (30 samples). Some variation in the probability of detection of pesticides (-metabolites) was observed with living in an agricultural area or season of urine sampling, though no consistent patterns were observed. We did observe differences in the probability of detection of a pesticide (metabolite) among children compared to adults, suggesting a different exposure and/or elimination patterns between adults and children. This survey demonstrates the feasibility of conducting a harmonized pan-European sample collection, combined with suspect screening to provide insight in the presence of exposure to pesticide mixtures in the European population, including agricultural areas. Future improvements could come from improved (harmonized) quantification of pesticide levels. [Display omitted] • First harmonised pan-European suspect screening study on pesticide mixtures. • 40 biomarkers related to 29 parent pesticides at high levels of confidence found. • In 84% of the samples at least two different pesticides were detected. • Acetamiprid and chlorpropham were most frequently detected and co-occurring. • No clear consistent differences in location and spraying season were detected. [ABSTRACT FROM AUTHOR]