Search

Background and purpose: Renal injury is a serious disorder that can be caused by some diseases or agents. Rosmarinic acid (RA) is a natural and safe compound with powerful antioxidant and anti-inflammatory properties. In this study, the ameliorative effects of RA were assayed in folic acid (FA)-induced renal injury by involving the SIRT1/NOX1 pathway. Experimental approach: Thirty-six male C57/BL6 mice were divided into 6 groups (n = 6) including control, vehicle, FA, RA, FA + RA 50, and FA + RA 100. After 10 days, blood urea nitrogen (BUN), creatinine, and oxidative stress were measured. The expression of SIRT1 and NOX1 proteins was evaluated by western blot. Also, histopathological alterations were assayed by H&E and PAS staining methods. Findings/Results: BUN and creatinine were significantly higher in the FA group compared to the control group; however, their levels decreased after RA treatment in both doses. A significant decrease was observed in swelling, necrosis, and desquamation of tubular epithelial cells in the FA + RA 50 and FA + RA 100 groups compared to the FA group. RA in the animals receiving FA increased SIRT1 expression and the levels of GSH and SOD compared to the FA group. RA in the animals receiving FA showed a significant decrease in NOX1 expression and MDA level compared to the FA group. Conclusion and implications: The findings declared that the administration of RA has positive effects against renal damage induced by FA. The effect might result from involvement in the SIRT1/NOX1 pathway and thereby attenuation of oxidative stress.

In the event of an abrupt sunlight reduction scenario, there is a time window that occurs between when food stores would likely run out for many countries (~6 months or less) and ~1 year when resilient foods are scaled up. A promising temporary resilient food is leaf protein concentrate (LPC). Although it is possible to extract LPC from tree biomass (e.g., leaves and needles), neither the yields nor the toxicity of the protein concentrates for humans from the most common tree species has been widely investigated. To help fill this knowledge gap, this study uses high-resolution mass spectrometry and an open-source toolchain for non-targeted screening of toxins on five common North American coniferous species: Western Cedar, Douglas Fir, Ponderosa Pine, Western Hemlock, and Lodgepole Pine. The yields for LPC extraction from the conifers ranged from 1% to 7.5%. The toxicity screenings confirm that these trees may contain toxins that can be consumed in small amounts, and additional studies including measuring the quantity of each toxin are needed. The results indicate that LPC is a promising candidate to be used as resilient food, but future work is needed before LPCs from conifers can be used as a wide-scale human food.

Proprietary bottle rolling systems automate some laboratory applications, however, their high costs limit accessibility. This study provides designs of an open source bottle roller that is compatible with distributed digital manufacturing using 3-D printed parts and readily-available commercial components. The experimental results show that the open source bottle roller can be fabricated for CAD$210 (about USD$150) in materials, which is 86% less expensive than the most affordable proprietary bottle roller on the market. The design, however, is more robust with enhanced capabilities. The design can be adapted to the user’s needs, but is already compatible with incubators with a low profile (dimensions 50 cm x46 cm x8.8 cm) and capable of being operated at elevated temperatures. The systems can be adjusted to revolves from 1 to 200 RPM, exceeding the rotational speed of most commercial systems. The open source bottle roller as tested has a capacity greater than 1.2 kg and can roll twelve 100 mL bottles simultaneously. Validation testing showed that it can operate for days at 80 RPM without human intervention or monitoring for days at both room temperature and elevated temperatures (50 °C). Future work includes adapting the designs for different sizes and for different fabrication techniques to further reduce costs and increase flexibility.

To stabilize the Earth’s climate, large-scale transition is needed to non-carbon-emitting renewable energy technologies like wind and solar energy. Although these renewable energy sources are now lower-cost than fossil fuels, their inherent intermittency makes them unable to supply a constant load without storage. To address these challenges, rechargeable electric batteries are currently the most promising option; however, their high capital costs limit current deployment velocities. To both reduce the cost as well as improve performance, 3D printing technology has emerged as a promising solution. This literature review provides state-of-the-art enhancements of battery properties with 3D printing, including efficiency, mechanical stability, energy and power density, customizability and sizing, production process efficiency, material conservation, and environmental sustainability as well as the progress in solid-state batteries. The principles, advantages, limitations, and recent advancements associated with the most common types of 3D printing are reviewed focusing on their contributions to the battery field. 3D printing battery components as well as full batteries offer design flexibility, geometric freedom, and material flexibility, reduce pack weight, minimize material waste, increase the range of applications, and have the potential to reduce costs. As 3D printing technologies become more accessible, the prospect of cost-effective production for customized batteries is extremely promising.

Ball milling is used for comminution by rotating a drum to grind materials using balls with specific diameters. Ball milling advantages include the potential for high capacity, predicted fineness in a specific amount of time, reliability, safety, and simplicity, but has disadvantages of high weight, energy consumption and costs, which limit accessibility. To overcome these limitations this study applies the free and open source hardware approach coupled to distributed digital manufacturing to fabricate a ball mill with a simple, customizable design that can be used in a wide range of scientific applications and circumstances including those without access to reliable grid electricity. The highly-customizable design reduces the cost to

Background: The diagnosis of pulmonary embolism (PE) because of nonspecific clinical presentation remains as a challenge for emergency physicians. Arterial to end-tidal partial pressure of carbon dioxide (P(a-Et)CO2) gradient may be useful in the evaluation of PE. This aimed to define the diagnostic role of P(a-Et)CO2 gradient by sidestream capnography, as a noninvasive method, and D-dimer in patients with PE. Materials and Methods: Two hundred and three patients with chest pain or dyspnea who attend the hospital emergency ward were enrolled over a study period at a single academic center. PE was confirmed by multidetector computed tomography (MDCT) scans. PaCO2, EtCO2, and D-dimer were measured within 24 h of MDCT by capnograph. Results: The combination of P(a-Et)CO2 gradient (cutoff >9.2 ng/ml) and D-dimer (cutoff >3011 ng/ml) with sensitivity and specificity of 30.2% and 87.2% showed a significant diagnostic value in detecting PE (area under the curve = 0.577, P = 0.045) but not alone (P > 0.05). Conclusion: As the results show, the combination of P(a-Et)CO2 gradient and D-dimer can show an acceptable diagnostic value in detecting PE, although it suggests further research on evaluating the diagnostic value of P(a-Et)CO2 gradient and combining it with other diagnostic criteria to achieve a definite and generalizable result.