Search

Polymer-based membranes containing nanocellulose and natural macromolecules have potential to treat water, however few works have associated the changes in chemical and morphological membrane's features with their performance as adsorbent. Herein, a new green composite based on nanocellulose (NC) and alkylated tannic acid (ATA) and cross-linked with proanthocyanidin was produced and incorporated into polyacrylonitrile (PAN) membranes to eliminate propranolol (PRO) from water. Characterizations revealed that the increasing of NC-ATA content reduced the pore size of the membrane's upper surface and made the finger like structure of the sublayer disappear, due to the formation of hydrophilic domains of NC/ATA which speeds up the external solidification step. The presence of NC-ATA reduced the hydrophilicity, from a water contact angle of 3.65° to 16.51°, the membrane roughness, from 223.5 to 52.0 nm, and the zeta potential from -25.35 to -55.20 mV, improving its features to be a suitable adsorbent of organic molecules. The membranes proved to be excellent green adsorbent, tridimensional, and easy to remove after use, and q max for PRO was 303 mg·g -1 . The adsorption mechanism indicates that H-bonds, ion exchange, and π-π play important role in adsorption. NC-ATA@PAN kept high removal efficiencies after four cycles, evidencing the potential for water purification., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The emergence of drug-resistant pathogenic microorganisms has become a public health concern, with demand for strategies to suppress their proliferation in healthcare facilities. The present study investigates the physicochemical and antimicrobial properties of carbon dots (CD-MR) derived from the methyl red azo dye. The morphological and structural analyses reveal that such carbon dots present a significant fraction of graphitic nitrogen in their structures, providing a wide emission range. Based on their low cytotoxicity against mammalian cells and tunable photoluminescence, these carbon dots are applied to bioimaging in vitro living cells. The possibility of using CD-MR to generate reactive oxygen species (ROS) is also analyzed, and a high singlet oxygen quantum efficiency is verified. Moreover, the antimicrobial activity of CD-MR is analyzed against pathogenic microorganisms Staphylococcus aureus , Candida albicans , and Cryptococcus neoformans . Kirby-Bauer susceptibility tests show that carbon dots synthesized from methyl red possess antimicrobial activity upon photoexcitation at 532 nm. The growth inhibition of C. neoformans from CD-MR photosensitization is investigated. Our results show that N-doped carbon dots synthesized from methyl red efficiently generate ROS and possess a strong antimicrobial activity against healthcare-relevant pathogens.

In this work, we focus on understanding the morphology and photocatalytic properties of CeO 2 nanocrystals (NCs) synthesized via a microwave-assisted solvothermal method using acetone and ethanol as solvents. Wulff constructions reveal a complete map of available morphologies and a theoretical-experimental match with octahedral nanoparticles obtained through synthesis using ethanol as solvent. NCs synthesized in acetone show a greater contribution of emission peaks in the blue region (∼450 nm), which may be associated with higher Ce 3+ concentration, originating shallow-level defects within the CeO 2 lattice while for the samples synthesized in ethanol a strong orange-red emission (∼595 nm) suggests that oxygen vacancies may originate from deep-level defects within the optical bandgap region. The superior photocatalytic response of CeO 2 synthesized in acetone compared to that of CeO 2 synthesized in ethanol may be associated with an increase in long-/short-range disorder within the CeO 2 structure, causing the E gap value to decrease, facilitating light absorption. Furthermore, surface (100) stabilization in samples synthesized in ethanol may be related to low photocatalytic activity. Photocatalytic degradation was facilitated by the generation of ·OH and ·O 2 - radicals as corroborated by the trapping experiment. The mechanism of enhanced photocatalytic activity has been proposed suggesting that samples synthesized in acetone tend to have lower e'─h· pair recombination, which is reflected in their higher photocatalytic response.

Hydrophobic chitosan aerogels are promising adsorbents for immiscible contaminants such as oils and organic solvents. However, few studies have reported the application of hydrophobic aerogels as adsorbent for organic contaminants dissolved in water. Herein, novel highly hydrophobic chitosan (CS) beads containing cellulose nanocrystals (CNC) and hydrophobized tannic acid (HTA) composite were prepared with different CS and CNC-HTA content to achieve an optimized adsorbent to remove emerging contaminants from water in batch and fixed-bed assays. The CS@CNC-HTA beads properties were assessed by FTIR, XRD, SEM, XPS, Micro-CT, WCA, and zeta potential. Supramolecular interactions and physical interlacements between CS and CNC-HTA enabled the formation of CS@CNC-HTA beads with high porosity (98.6%), great volume of open pore space (10.16 mm 3 ) and hydrophobicity (121.8°). The 1:1 CS@CNC-HTA beads showed the best performance for removing the pharmaceutical sildenafil citrate, the basic blue 26 dye, and the surfactant cetylpyridinium chloride, reaching adsorption capacities of 86 (73%), 375 (84%), and 390 (90%) mg.g -1 , respectively. The 1:1 CS@CNC-HTA beads efficiently removed sildenafil citrate, basic blue 26 and cetylpyridinium chloride in fixed-bed experiments with exhaustion times of 890, 300, and 470 min, respectively. Theoretical calculations and adsorption assays indicate that the main attractive interactions are pyridinium-π, π-π, electrostatic and hydrophobic., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

A green magnetic composite mCS/GO was synthesized using water hyacinth extract, as a reducing agent, and proanthocyanidin, as a crosslinking agent, for the adsorption of naphthalene from effluents. The green composite was evaluated using different characterization techniques to determine its thermal (TG/DTG), structural (BET, XPS and FTIR), crystallographic (XRD), and textural (SEM) properties in natura and post-adsorption. The results obtained through a central composite design (CCD) experiment indicated that the initial concentration of NAP and the adsorbent dosage are significant for the adsorption capacity. The adsorption assays indicated that physisorption, through π-π and hydrophobic interactions, were the main mechanism involved in the NAP adsorption. However, the adjustment to the PSO and Freundlich models, obtained through kinetic and equilibrium studies, indicated that chemisorption also influences the adsorptive process. The thermodynamic study indicated physisorption as the mechanism responsible for the NAP adsorption. Also, the adsorbent has high affinity for the adsorbate and the process is spontaneous and endothermic. The maximum adsorption capacity (q max ) of the green mCS/GO was 334.37 mg g -1 at 20 °C. Furthermore, the green mCS/GO was effectively regenerated with methanol and reused for five consecutive cycles, the percentage of NAP recovery went from approximately 91 to 75% after the fifth cycle. The green composite was also applied in the adsorption of NAP from river water samples, aiming to evaluate the feasibility of the method in real applications. The adsorption efficiency was approximately 70%. From what we know, this it is the first time that a green adsorbent was recycled after the polycyclic aromatic hydrocarbon (PAHs) adsorption process., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

We have developed a clean route for the modification of polyvinylchloride surface (PVC) with 4-amino-5-hydrazino-1,2,4-triazole-3-thiol molecule. The modification reaction was investigated through Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) analysis. According to our findings, S-H groups are responsible to the molecule attachment and nitrogen atoms are directly involved in metal ion coordination. These results are in agreement with the pseudo-second-order kinetic model, which infers that chemisorption is the main mechanism for metal removal. Adsorption isotherms of Cd(II), Cu(II) and Pb(II) follow the Langmuir model and the results indicated that N s values are 0.39, 0.52 and 0.15 mmol g -1 , respectively. The calculated Ø max values for Cu(II), Pb(II) and Cd(II) were 3.93, 2.95 and 1.13, respectively, indicating that three types of complex are formed depending on the adsorbed species. Therefore, it can be concluded that PVC use as adsorbent is feasible since it requires a simple modification reaction with nontoxic and low-cost solvents.

Photocatalysts supported in magnetic nanocomposites for application in environmental remediation processes have been evaluated for removing contaminants due to easy recovery and low toxicity to the ecosystem. In this work, copper oxide (CuO) nanoparticles with photocatalytic properties were decorated on magnetic support constituted by hydroxyapatite (HAP) and ferrite to achieve efficiency in contaminated water remediation under visible light irradiation. First, nanomaterials were obtained by precipitation route, allowing fast and straightforward synthesis. Then, CuO nanoparticles with 6 nm diameter were efficiently decorated on magnetic support (25 nm), showing a high ability to absorb visible light irradiation (bandgap) to promote electronic transition and charge separation. Under visible irradiation, CuO promotes the H 2 O 2 reduction in the conduction band (BC) to form hydroxyl radicals ( • OH), which are responsible for rhodamine B (RhB) dye degradation (> 90% in 60 min). Magnetic hysteresis assays confirmed the magnetic properties of HAP/ferrite support, which enabled the recovery and reuse of the magnetic photocatalyst efficiently up to 3 cycles. Due to low Cu 2+ leaching after the photocatalytic application stage, cytotoxicity assay for the Allium cepa seeds did not exhibit abnormal cells other than those commonly found. Furthermore, the CuO-decorated nanoparticles showed bactericidal activity against S. aureus (Gram-positive) and E. coli (Gram-negative) microorganisms, being more significant for the first one. Thus, the developed nanocomposite of CuO nanoparticles decorated on the magnetic support surface showed to be a complete system for water remediation, acting in contaminant degradation under visible light irradiation and bactericidal control with environmentally friendly characteristics.Graphical abstract CuO nanoparticles decorated on hydroxyapatite/ferrite magnetic support acting as a photocatalytic and bactericidal system., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The photo-Fenton activity of graphitic carbon nitride (g-C 3 N 4 ) has been widely studied, nevertheless, its Fenton-like catalytic behavior in the dark has not yet been demonstrated. In the present work, it is shown that oxygenated g-C 3 N 4 obtained at different temperatures (500-600 °C) can degrade indigo carmine with hydrogen peroxide in the dark by a reaction similar to a conventional Fenton's reaction. Based on an extensive characterization of g-C 3 N 4 , we conclude that Fenton-like activity is directly related to the oxygenated functional groups on g-C 3 N 4 structure, mainly by -OH functional groups. Oxygenated functional groups (e.g., hydroquinone-like groups) can reduce the H 2 O 2 and generate oxidizing hydroxyl radicals, just like in the Fenton reaction performed by metals. In addition to new information on g-C 3 N 4 surface reactivity revealed by this study, the metal-free oxygenated g-C 3 N 4 catalyst may be an alternative to traditional metal catalysts used in Fenton-like reactions for advanced oxidation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Cellulose nanofibers (CNF) are renewable and biodegradable nanomaterials with attractive barrier, mechanical and surface properties. In this work, three different recombinant enzymes: an endoglucanase, a xylanase and a lytic polysaccharide monooxygenase, were combined to enhance cellulose fibrillation and to produce CNF from sugarcane bagasse (SCB). Prior to the enzymatic catalysis, SCB was chemically pretreated by sodium chlorite and KOH, while defibrillation was accomplished via sonication. We obtained much longer (μm scale length) and more thermostable (resisting up to 260 °C) CNFs as compared to the CNFs prepared by TEMPO-mediated oxidation. Our results showed that a cooperative action of the set of hydrolytic and oxidative enzymes can be used as a "green" treatment prior to the sonication step to produce nanofibrillated cellulose with advanced properties., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Crystal morphology with different surfaces is important for improving the antibacterial activity of materials. In this experimental and theoretical study, the antibacterial activity of β-Ag 2 MoO 4 microcrystals against the Gram-positive bacteria, namely, methicillin-resistant Staphylococcus aureus (MRSA), and the Gram-negative bacteria, namely, Escherichia coli (E. coli), was investigated. In this study, β-Ag 2 MoO 4 crystals with different morphologies were synthetized by a simple co-precipitation method using three different solvents. The antimicrobial efficacy of the obtained microcrystals against both bacteria increased according to the solvent used in the following order: water < ammonia < ethanol. Supported by experimental evidence, a correlation between morphology, surface energy, and antibacterial performance was established. By using the theoretical Wulff construction, which was obtained by means of density functional calculations, the morphologies with large exposition of the (001) surface exhibited superior antibacterial activity. This study provides a low cost route for synthesizing β-Ag 2 MoO 4 crystals and a guideline for enhancing the biological effect of biocides on pathogenic bacteria by the morphological modulation., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Material processing has become essential for the proper control, tuning and consequent application of the properties of micro/nanoparticles. In this case, we report herein the capability of the microwave-assisted hydrothermal (MAH) method to prepare the SrTiO3 compound, as a case study of inorganic compounds. Analyses conducted by X-ray diffraction, X-ray photoelectron and X-ray absorption spectroscopies confirmed that the MAH route enables the formation of pristine SrTiO3. The results indicated that the combination of thermal and non-thermal effects during the MAH treatment provides ideal conditions for an efficient and rapid synthesis of pristine SrTiO3 mesocrystals. Scanning electron microscopy images revealed a cube-like morphology (of ca. 1 μm) formed via a self-assembly process, influenced by the MAH time. Additionally, photoluminescence measurements revealed a broad blue emission related to intrinsic defects, which decreased with the MAH synthesis time.

Two kinds of flexible ozone (O 3 ) sensors were obtained by placing pristine ZnO nanorods and gold-modified ZnO nanorods (NRs) on a bi-axially oriented poly(ethylene terephthalate) substrate. The chemiresistive sensor is operated at typically 1 V at room temperature under the UV-light illumination. The ZnO nanorods were prepared via a hydrothermal route and have a highly crystalline wurtzite structure, with diameters ranging between 70 and 300 nm and a length varying from 1 to 3 μm. The ZnO NRs were then coated with a ca. 10 nm gold layer whose presence was confirmed with microscopy analysis. This sensor is found to be superior to detect ozone at a room temperature. Typical figures of merit include (a) a sensor response of 108 at 30 ppb ozone for gold-modified ZnO NRs, and (b) a linear range that extends from 30 to 570 ppb. The sensor is stable, reproducible and selective for O 3 compared to other oxidizing and reducing gases. The enhanced performance induced by the modification of ZnO nanorods with thin layer of gold is attributed to the increased reaction kinetics compared to pristine ZnO NRs. The sensing mechanism is assumed to be based on the formation of a nano-Schottky type barrier junction at the interface between gold and ZnO. Graphical abstract Room temperature, flexible UV-enhanced gold modified ZnO nanorods can detect ppb levels of ozone.

X-ray Absorption Fine Structure (XAFS) spectroscopy has been widely used to characterize the short-range order of glassy materials since the theoretical basis was established 45 years ago. Soon after the technique became accessible, mainly due to the existence of Synchrotron laboratories, a wide range of glassy materials was characterized. Silicate glasses have been the most studied because they are easy to prepare, they have commercial value and are similar to natural glasses, but borate, germanate, phosphate, tellurite and other less frequent oxide glasses have also been studied. In this manuscript, we review reported advances in the structural characterization of oxide-based glasses using this technique. A focus is on structural characterization of transition metal ions, especially Ti, Fe, and Ni, and their role in different properties of synthetic oxide-based glasses, as well as their important function in the formation of natural glasses and magmas, and in nucleation and crystallization. We also give some examples of XAFS applications for structural characterization of glasses submitted to high pressure, glasses used to store radioactive waste and medieval glasses. This updated, comprehensive review will likely serve as a useful guide to clarify the details of the short-range structure of oxide glasses., Competing Interests: The authors declare no conflict of interest.

This work reports the setting up of the X-ray diffraction and spectroscopy beamline at the Brazilian Synchrotron Light Laboratory for performing total scattering experiments to be analyzed by atomic pair distribution function (PDF) studies. The results of a PDF refinement for Al 2 O 3 standard are presented and compared with data acquired at a beamline of the Advanced Photon Source, where it is common to perform this type of experiment. A preliminary characterization of the Pb 1-x La x Zr 0.40 Ti 0.60 O 3 ferroelectric system, with x = 0.11, 0.12 and 0.15, is also shown.

A detailed study of the structural, surface, and gas-sensing properties of nanostructured Co x Zn 1-x O films is presented. X-ray diffraction (XRD) analysis revealed a decrease in the crystallization degree with increasing Co content. The X-ray absorption near-edge structure (XANES) and X-ray photoelectron spectroscopies (XPS) revealed that the Co 2+ ions preferentially occupied the Zn 2+ sites and that the oxygen vacancy concentration increased as the amount of cobalt increased. Electrical measurements showed that the Co dopants not only enhanced the sensor response at low ozone levels (ca. 42 ppb) but also led to a decrease in the operating temperature and improved selectivity. The enhancement in the gas-sensing properties was attributed to the presence of oxygen vacancies, which facilitated ozone adsorption.

Strontium titanate nanoparticles have attracted much attention due to their physical and chemical properties, especially as photocatalysts under ultraviolet irradiation. In this paper, we analyze the effect of heating rate during the crystallization process of SrTiO3 nanoparticles in the degradation of organic pollutants. The relationship between structural, morphological and photocatalytic properties of the SrTiO3 nanoparticles was investigated using different techniques. Transmission electron microscopy and N2 adsorption results show that particle size and surface properties are tuned by the heating rate of the SrTiO3 crystallization process. The SrTiO3 nanoparticles showed good photoactivity for the degradation of methylene blue, rhodamine B and methyl orange dyes, driven by a nonselective process. The SrTiO3 sample with the largest particle size exhibited higher photoactivity per unit area, independent of the molecule to be degraded. The results pointed out that the photodegradation of methylene blue dye catalyzed by SrTiO3 is caused by the action of valence band holes (direct pathway), and the indirect mechanism has a negligible effect, i.e. degradation by O2 (-•) and (•) OH radicals attack., (© 2016 The American Society of Photobiology.)

Perovskite strontium titanate is a promising functional material for gas sensors and catalysis applications. Herein, we report the preparation of SrTi1-xCuxO3 nanoparticles with Cu doped in the B sites using a modified polymeric precursor method. This study describes in detail the structural and local atomic configurations for the substitution of Cu into the titanium sites and its reducibility using X-ray diffraction (XRD), field emission gun scanning and transmission electron microscopies (FEG-SEM and TEM), X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS) and temperature-programmed reduction (TPR) analyses. Our results indicate that copper is segregated for x≥ 0.06. After exposing the samples to a hydrogen-rich atmosphere at temperatures over 500 K, copper is reduced from Cu(2+) to metallic Cu. This reduction was attributed to copper atoms that originated primarily from the CuO phase.

A microwave-assisted hydrothermal method was applied to synthesize BaZr1-xHfxO3, (BZHO) solid solutions at a low temperature, 140 °C, and relatively short times, 160 min. The detailed features of the crystal structure, at both short and long ranges, as well as the crystal chemistry doping process, are extensively analysed. X-ray diffraction measurements and Raman spectroscopy have been used to confirm that pure and Hf-doped BZO materials present a cubic structure. Extended X-ray absorption fine structure (EXAFS) spectra indicate that Hf(4+) ions have replaced the Zr(4+) ions on the 6-fold coordination and a subsequent change on the Ba(2+) 12-fold coordination can be sensed. X-ray absorption near-edge structure (XANES) spectroscopy measurements reveal a local symmetry breaking process, associated to overlap of the 4d-2p and 5d-2p orbitals of Zr-O and Hf-O bonds, respectively. Field emission scanning electron microscopy (FE-SEM) and high resolution transmission electron microscopy (HRTEM) show the mesocrystalline nature of self-assembled BZHO nanoparticles under a dodecahedron shape. In addition first principle calculations were performed to complement the experimental data. The analysis of the band structures and density of states of the undoped BZO and doped BZHO host lattice allow deep insight into the main electronic features. The theoretical results help us to find a correlation between simulated and experimental Raman modes and allow a more substantial interpretation of crystal structure.

A morphology-dependent nanomaterial for energy and environment applications is one of the key challenges for materials science and technology. In this study, we investigate the effect of the particle size of CuAlO2 nanostructures prepared through the facile and hydrothermal process to detect ozone gas. Phase analysis and structural information were obtained using X-ray diffraction and micro-Raman studies. The chemical states of CuAlO2 atomic species were determined by X-ray photoelectron spectroscopy. Electron microscopy images revealed the flower and hexagonal shape constituted of pentagon and oval CuAlO2 nanoparticles with average size ∼40 and 80 nm. The specific surface area was measured and found to be 59.8 and 70.8 m(2) g(-1), respectively. The developed CuAlO2 nanostructures not only possess unique morphology but also influence the ozone gas sensing performance. Among the two structures, CuAlO2, with hexagonal morphology, exhibited superior ozone detection for 200 ppb at 250 °C, with a response and good recovery time of 25 and 39 s compared to the flower morphology (28 and 69 s). These results show that not only does the morphology play an major role but also the particle size, surface area, gas adsorption/desorption, and grain-grain contact, as proposed in the gas sensing mechanism. Finally, we consider CuAlO2 material as a good candidate for environment monitoring applications.

In the present work, perovskite LaFeO3 thin films with unique morphology were obtained on silicon substrate using radio frequency magnetron sputtering technique. The effect of thickness and temperature on the morphological and structural properties of LaFeO3 films was systematically studied. The X-ray diffraction pattern explored the highly oriented orthorhombic perovskite phase of the prepared thin films along [121]. Electron micrograph images exposed the network and nanocube surface morphology of LaFeO3 thin films with average sizes of ∼90 and 70 nm, respectively. The developed LaFeO3 thin films not only possess unique morphology, but also influence the gas-sensing performance toward NO2. Among the two morphologies, nanocubes exhibited high sensitivity, good selectivity, fast response-recovery time, and excellent repeatability for 1 ppm level of NO2 gas at room temperature. The response time for nanocubes was 24-11 s with a recovery duration of 35-15 s less than the network structure. The sensitivity toward NO2 detection was found to be in the range 29.60-157.89. The enhancement in gas-sensing properties is attributed to their porous structure, surface morphology, numerous surface active sites, and the oxygen vacancies. The gas-sensing measurements demonstrate that the LaFeO3 sensing material is an outstanding candidate for NO2 detection.

This paper reports on a new ozone gas sensor based on α-Ag₂WO₄ nanorod-like structures. Electrical resistance measurements proved the efficiency of α-Ag₂WO₄ nanorods, which rendered good sensitivity even for a low ozone concentration (80 ppb), a fast response and a short recovery time at 300 °C, demonstrating great potential for a variety of applications.

We report herein a detailed study on the influence of microwave-assisted hydrothermal (MAH) treatment time on both long and short range structures around Ti atoms of SrTiO3 powders. Few studies have been carried out on short-order structural properties as well as the relationship between the local order and the SrTiO3 photocatalytic properties. We use X-ray diffraction to determine the long-range structure, while the local environment around the Ti atom is probed with X-ray absorption spectroscopy and the vibration frequencies are investigated by Raman spectroscopy. The faster crystallization of SrTiO3 powders provided by the MAH system resulted in large distortions of Ti-O bond lengths which remain unchanged even for a longer MAH treatment time. Despite the long-range structure being associated with ideal TiO6 clusters, X-ray absorption spectroscopy measurements identified the presence of undercoordinated TiO5 clusters. Compared with the reference bulk SrTiO3, the hierarchical SrTiO3 cube-like shape showed enhanced photocatalytic activity, which was associated with the presence of these TiO5 clusters. Field emission scanning electron microscopy (FE-SEM) revealed that the superstructures based on a cube-like shape are formed by an assembly process, becoming well defined as a function of MAH treatment time.

In this paper, we report our initial research to obtain hexagonal rod-like elongated silver tungstate (α-Ag(2)WO(4)) microcrystals by different methods [sonochemistry (SC), coprecipitation (CP), and conventional hydrothermal (CH)] and to study their cluster coordination and optical properties. These microcrystals were structurally characterized by X-ray diffraction (XRD), Rietveld refinements, Fourier transform infrared (FT-IR), X-ray absorption near-edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) spectroscopies. The shape and average size of these α-Ag(2)WO(4) microcrystals were observed by field-emission scanning electron microscopy (FE-SEM). The optical properties of these microcrystals were investigated by ultraviolet-visible (UV-vis) spectroscopy and photoluminescence (PL) measurements. XRD patterns and Rietveld refinement data confirmed that α-Ag(2)WO(4) microcrystals have an orthorhombic structure. FT-IR spectra exhibited four IR-active modes in a range from 250 to 1000 cm(-1). XANES spectra at the W L(3)-edge showed distorted octahedral [WO(6)] clusters in the lattice, while EXAFS analyses confirmed that W atoms are coordinated by six O atoms. FE-SEM images suggest that the α-Ag(2)WO(4) microcrystals grow by aggregation and the Ostwald ripening process. PL properties of α-Ag(2)WO(4) microcrystals decrease with an increase in the optical band-gap values (3.19-3.23 eV). Finally, we observed that large hexagonal rod-like α-Ag(2)WO(4) microcrystals prepared by the SC method exhibited a major PL emission intensity relative to α-Ag(2)WO(4) microcrystals prepared by the CP and CH methods.

The application of one-dimensional (1D) V2O5·nH2O nanostructures as pH sensing material was evaluated. 1D V2O5·nH2O nanostructures were obtained by a hydrothermal method with systematic control of morphology forming different nanostructures: nanoribbons, nanowires and nanorods. Deposited onto Au-covered substrates, 1D V2O5·nH2O nanostructures were employed as gate material in pH sensors based on separative extended gate FET as an alternative to provide FET isolation from the chemical environment. 1D V2O5·nH2O nanostructures showed pH sensitivity around the expected theoretical value. Due to high pH sensing properties, flexibility and low cost, further applications of 1D V2O5·nH2O nanostructures comprise enzyme FET-based biosensors using immobilized enzymes.

Four aluminas were used as supports for impregnation with a zirconium oxide with the aim to achieve a coating, without phase separation, between support and modifier. The supports were impregnated with different concentrations of zirconium aqueous resin, obtained through the polymeric precursor method. After impregnation the samples were calcined and then characterized by XRD, which led to identification of crystalline zirconia in different concentrations from each support used. Using a simple geometric model the maximum amount of surface modifier oxide required for the complete coating of a support with a layer of unit cells was estimated. According to this estimate, only the support should be identified below the limit proposed and crystalline zirconium oxide should be identified above this limit when a complete coating is reached. The results obtained from XRD agree with the estimated values and to confirm the coating, the samples were also characterized by EDS/STEM, HRTEM, XPS, and XAS. The results showed that the zirconium oxide on the surface of alumina support reached the coating in the limit of 15 Zr nm(-2), without the formation of the ZrO(2) phase., (2009 Elsevier Inc. All rights reserved.)

Intense and broad visible photoluminescent (PL) band was observed at room temperature in disordered Pb(Zr0.53Ti0.47)O3 powders. Structural order-disorder was evaluated by different methods. XANES results pointed to the presence of different coordination modes of disordered Ti powders, and in the ordered sample the local structure around titanium atoms is characteristic of the structurally ordered PZT with only TiO6 units. Only samples containing simultaneous structural order and disorder in their network present the intense visible PL emission at room temperature.

This work reports on the optimization of Yo.9 Er0.1 Al3(BO3)4 thin films for integrated optics. The films were deposited on silica and silicon substrates using the spin-coating technique involving solutions previously prepared by the polymeric precursor method. These deposits, 400-800 nm thick, were prepared by a 5-10 multi-layer process and heat treatments at different temperatures from glass transition to crystallization temperature, using heating rates of 2 or 5 degrees C/min. The structural characterizations were performed using grazing incidence X-ray diffraction and Fourier transform infrared spectroscopy (FT-IR). Water and/or hydroxyl contents were also evaluated from FT-IR spectra. Microstructural evolution in term of annealing temperatures was analyzed by high resolution scanning electronic microscopy and atomic force microscopy. Optical transmission spectra were used to determine the refractive index and thickness through the envelope method of the films. Finally, the film guiding and optical properties were studied by m-line spectroscopy. The best film showed a good waveguiding with high light-coupling efficiency close to the theoretical limit.

The structure of Pb(1-x)Ba(x)Zr(0.65)Ti(0.35)O(3) (PBZT) ceramic materials with 0.00 < or = x < or = 0.40 was studied using synchrotron X-ray powder diffraction data. According to the Rietveld refinements, the structure of PBZT ceramics with x = 0.00, 0.10 and 0.20 at room temperature was rhombohedral R3c. A phase transition from rhombohedral to cubic was observed at 543 and 463 K for x = 0.10 and 0.20, respectively. The refinement for the compositions x = 0.30 and x = 0.40 showed a cubic structure from 10 to 450 K, in good agreement with the dielectric properties of these samples.

A series of W/Ni/Al2O3 catalysts was prepared by coprecipitation of nickel and aluminum and impregnation of tungsten. The samples were characterized by XRD, XPS and XAS techniques. XRD measurements detected two phases: NiO as the main phase and NiAl2O4 in lower amount; no phase containing tungsten was detected. XPS measurements indicated the presence of Al2O3, NiAl2O4, and Al2(WO4)3 phases on the catalyst surfaces. The XANES spectra of catalysts were rather similar for all of the samples. According to the EXAFS results, at the short range level, tungsten does not form any bound with Ni atoms. The nickel first coordination shell in the catalysts containing tungsten is similar to that encountered in COP 1 catalyst without tungsten. The lower Ni-Ni coordination number observed for all catalysts, when compared to the NiO phase, can be attributed to the nickel-aluminum interaction.