Search

Plastic pollution in aquatic ecosystems has become a significant problem especially microplastics which can encapsulate into the skeletons of organisms that produce calcium carbonates, such as foraminifera, molluscs and corals. The encapsulation of microplastics into precipitated aragonite, which in nature builds the coral skeleton, has not yet been studied. It is also not known how the dissolved organic matter, to which microplastics are constantly exposed in aquatic ecosystems, affects the encapsulation of microplastics into aragonite and how such microplastics affect the mechanical properties of aragonite. We performed aragonite precipitation experiments in artificial seawater in the presence of polystyrene (PS) and polyethylene (PE) microspheres, untreated and treated with humic acid (HA). The results showed that the efficiency of encapsulating PE and PE-HA microspheres in aragonite was higher than that for PS and PS-HA microspheres. The mechanical properties of resulting aragonite changed after the encapsulation of microplastic particles. A decrease in the hardness and indentation modulus of the aragonite samples was observed, and the most substantial effect occurred in the case of PE-HA microspheres encapsulation. These findings raise concerns about possible changes in the mechanical properties of the exoskeleton and endoskeleton of calcifying marine organisms such as corals and molluscs due to the incorporation of pristine microplastics and microplastics exposed to dissolved organic matter. [ABSTRACT FROM AUTHOR]

The prevalence of bacterial infections presents a significant challenge in the medical field, demanding effective strategies to impede bacterial adhesion and growth on various surfaces. The conducted study investigates the efficacy of polyelectrolyte multilayerscomprising poly-(allylamine hydrochloride) (PAH) and alginate (ALG)embedded with zinc oxide (ZnO) and copper oxide (CuO) nanoparticles (NPs) to inhibit bacterial adhesion on stainless-steel surfaces. Surface characterization involved zeta potential, contact angle, and roughness assessments. The effect of NP composition, size, and morphology in conjunction with polycation or polyanion terminating multilayers was evaluated against planktonic and surface-adhered Escherichia coli (E. coli) cells. Surfaces with the positively charged PAH-terminating multilayer displayed higher water contact angles (≈ 63°) than the negatively charged ALG-terminating multilayers (≈ 45°). Multilayers containing ZnO NPs showed a significant inhibition of planktonic E. coli growth, >99%. Moreover, complete growth inhibition of surface-adhered E. coli was achieved for multilayers containing both ZnO and CuO. Due to their larger specific surface area, rod-like ZnO NPs displayed higher antibacterial activity. The samples with ALG as the terminating layer showed more substantial antibacterial properties than samples with PAH as the terminating layer. Biocompatibility tests on immortalized human keratinocyte cells revealed good compatibility with multilayers incorporating NPs. In summary, this study underscores the potential of ZnO and CuO NPs within PAH/ALG multilayers for antibacterial applications without compromising their cytocompatibility. [ABSTRACT FROM AUTHOR]

In healthcare facilities, infections caused by Staphylococcus aureus (S. aureus) from textile materials are a cause for concern, and nanomaterials are one of the solutions; however, their impact on safety and biocompatibility with the human body must not be neglected. This study aimed to develop a novel multilayer coating with poly(allylamine hydrochloride) (PAH) and immobilized ZnO nanoparticles (ZnO NPs) to make efficient antibacterial and biocompatible cotton, polyester, and nylon textiles. For this purpose, the coated textiles were characterized with profilometry, contact angles, and electrokinetic analyzer measurements. The ZnO NPs on the textiles were analyzed by scanning electron microscopy and inductively coupled plasma mass spectrometry. The antibacterial tests were conducted with S. aureus and biocompatibility with immortalized human keratinocyte cells. The results demonstrated successful PAH/ZnO coating formation on the textiles, demonstrating weak hydrophobic properties. Furthermore, PAH multilayers caused complete ZnO NP immobilization on the coated textiles. All coated textiles showed strong growth inhibition (2–3-log reduction) in planktonic and adhered S. aureus cells. The bacterial viability was reduced by more than 99%. Cotton, due to its better ZnO NP adherence, demonstrated a slightly higher antibacterial performance than polyester and nylon. The coating procedure enables the binding of ZnO NPs in an amount (<30 µg cm−2) that, after complete dissolution, is significantly below the concentration causing cytotoxicity (10 µg mL−1). [ABSTRACT FROM AUTHOR]

CaCO3 precipitation is physical-chemical basis of biomineral formation of hard tissue (shells, skeletons) in marine calcifying organisms (=biomineralization). Processes controlling biomineralization are still not fully clarified, so the study of influence of pH on basic processes of CaCO3 precipitation should contribute to better understanding of biomineralization under climate change. This paper reports on the effect of initial pH (pH0) and type of stirring (mechanical and magnetical) on spontaneous precipitation and phase composition, size and morphology of spontaneously precipitated CaCO3 formed at the identical initial supersaturation, ionic strength and a(Ca2+)/a(CO32−) ratio. The initial pH varied in a range 8.50 ≤ pH0 ≤ 10.50 and included values relevant for mimicking the conditions related to biomineralization in marine organisms. In all systems two CaCO3 polymorphs were found: calcite and/or vaterite. The increase of pH0 favoured the formation of rhombohedral calcite no matter the type of stirring. This was exclusively influenced by the systems' pH0 (other relevant initial parameters were identical). Furthermore, increase of pH0 caused change of vaterite morphology from cauliflower-like spheroids to regular spherulites. The mechanically stirred systems produced larger calcite and vaterite particles and higher content of calcite. [ABSTRACT FROM AUTHOR]

Plate-like calcite crystals with expressed unstable {001} planes are interesting research model for investigations of interfacial interactions of different additive molecules, but also the crystal growth mechanisms. The aim of this study is to reproducibly prepare a significant amount of well-defined plate-like calcite crystals and to investigate the critical experimental parameters. Thus, in precipitation system c(NaHCO3) = c(CaCl2) = 0.1 mol dm−3, the influence of hydrodynamic parameters (mode of mixing of the reaction components) and a presence of lithium ions Li+ within a wide range of concentrations, 0.0 mol dm−3 < c(Li+) < 1.0 mol dm−3, have been studied. In addition, the kinetics of the solution mediated transformation of the initially formed metastable polymorph, vaterite, were followed in order to reproducibly describe the formation of stable calcite with expressed unstable morphology. The results indicate that the plate-like calcite is formed predominantly when the ultrasound irradiation is applied at c(Li+) ≥ 0.3 mol dm−3. On the other hand, when the magnetic and mechanical stirring are applied at higher Li+ concentrations, truncated rhombohedral crystals in a mixture with plate-like crystals are obtained. It was also found that the Li+ addition significantly prolonged the transformation, mainly by inhibiting the crystal growth of calcite. [ABSTRACT FROM AUTHOR]