Search

Peripheral dynamic movements are used as part of postoperative protocols and for preventing vascular complications during bed rest. The effects of peripheral movements have not been studied. The purposes of these studies were to explain the effects of peripheral dynamic movements on lower limb circulation. The aim was also to explain how other factors like sex, age, BMI, medication, smoking, sports activity etc. affect the circulation. Healthy young subjects (N=19), healthy elderly subjects (N=19) and diabetic subjects (N=21) participated in the studies between 1997 and 1999. The study design was the same in each study. Infrared technology and image processing belong to our focus fields of applied research and IR is widely used in our real time industrial applications including also ongoing research of new possibilities. This paper presents the results of our newest application of IR thermography, where it was used to measure the skin temperature over the soleus muscle during and after dynamic ankle movements. The results showed that the skin temperature increased further during the recovery period after movements, and temperature was highest after 3- 5 minutes. Diabetic male subjects were the only subgroup that had immediate decrease during recovery period. The studies showed that smoking had a negative effect on circulation. BMI had also negative correlation (-0,356), showing that subjects with higher BMI had less increase. The results proved that peripheral movements were effective for increasing circulation in the soleus muscle and the effect was still seen after 15 minutes.© (2002) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.

IR monitoring is a basic tool for quality control and predictive maintenance in the paper industry. There are also other possible interests, e.g. measurements of temperature profiles of high speed production lines. The first possibility to use IR for the above mentioned use appears to be applications of glass heat treatment in on line production. At this time there is a lot of interest to be able to measure temperature profiles from a fast moving surface (e.g. in paper machines) with velocities like 10 - 20 m/s. Normal low speed line scanners typically give scanning speed of 50 Hz which in this case means 20 m/s/50 Hz equals 40 cm resolution. The obtained resolution is not normally high enough. To have more accurate vision from the studied surface IR camera line scanning was proposed to be a solution with line scanning frequencies of 8000 Hz which would provide resolution of 20 m/s/8000 Hz equals 0.25 cm between surface points. It is a well-known fact that all undesired frequencies in paper transfer systems disturb the uniform paper drying process which in some cases is the basic reason for low quality coating or even broken paper line. The possibility to detect these drying problems with IR frequency analysis will give a new way to control the paper drying process. With IR analysis it is possible to get information about temperature distributions along the paper track. Using a well established frequency analysis as a tool, the error estimations are obtained. In most cases an open-roll image from paper track is very desirable because there are no existing wide area measurement systems for this purpose. The careful analysis of this new method is given in the manuscript.© (1996) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.

Industrial maintenance is one of the main branches of infrared thermology applications. Our main studies are also concentrated on real time applications e.g., quality control automation. Environmental control is the branch which is strongly increasing. Plant damage is one of the most interesting things. The temperature changes is one feature which gives information about damage. At the beginning the necessary laboratory tests were done to study the possibilities of infrared monitoring of nature. After the preliminary tests the systematical studies were carried out. Using systematical measurements with infrared camera including image processing on plant leaves the clear changes were seen as a function of time. The studies were done applying the measurements on the fresh plant leaves. Later on the leaves were damaged by cutting and again monitored by infrared. After filtering and profile analysis the systematical changes were detected which show the changes of plant physiology after damage. The analysis of the above studies are given in this paper.© (1995) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.