Search

Background: Schizophrenia (SCZ) patients have disproportionately poor oral health outcomes owing to a multidimensional set of factors, such as pathophysiology of the disease, drug-related adverse effects and lower utilization rate of dental healthcare services. The aim of the present observational study was to compare the indicators of dental and periodontal health in patients with SCZ to those of nonaffected healthy controls; furthermore, the influence of various anamnestic factors and lifestyle habits on oral health status were also assessed. Methods: A total of 50 SCZ patients-in remission-receiving treatment at the Department of Psychiatry, University of Szeged, were compared with 50 age- and gender-matched healthy controls attending the Faculty of Dentistry, University of Szeged. Participants' dental (decayed, missing and filled surfaces [DMF-S] and decayed, missing and filled teeth [DMF-T]) and periodontal (plaque index [%], bleeding on probing [BOP%], pocket depth [PD] and attachment loss [AL]) status was measured according to the World Health Organization (WHO) criteria. Results: In total, 74.0%, 80.0% and 78.0% of SCZ patients received second-generation antipsychotics, benzodiazepines and mood stabilizers, respectively. Patients with SCZ had significantly higher DMFs (81.30 ± 40.16 vs. 61.64 ± 40.56; p = 0.010), D (8.18 ± 7.73 vs. 4.18 ± 4.22; p < 0.001) and DMF-T (18.20 ± 8.36 vs. 14.42 ± 8.21; p = 0.024) scores but significantly lower F (1.84 ± 0.29 vs. 4.62 ± 3.98; p < 0.001) scores compared to the controls; male subjects had significantly lower DMFs (74.52 ± 39.72 vs. 90.67 ± 39.1; p = 0.020) and DMF-T (16.52 ± 8.12 vs. 20.52 ± 8.32; p = 0.031) scores. Additionally, SCZ patients had significantly higher plaque indices (56.96 ± 23.19 vs. 27.44 ± 17.53; p < 0.001), BOP% (58.96 ± 22.89 vs. 23.56 ± 17.53; p < 0.001), PD (2.84 ± 0.67 vs. 2.19 ± 0.49; p = 0.024) and AL (3.39 ± 1.72 vs. 2.49 ± 0.76; p < 0.001) values compared to controls. Smoking > 10 cigarettes/day was associated with worse dental and periodontal indices, while consuming ≥ 4 units/week of alcohol was associated with worse periodontal indices, respectively ( p < 0.05 in all cases). In contrast, coffee consumption rates and vitamin supplementation status had no significant effect on oral health status indicators. Conclusions: Our study highlights the overall poor oral health status of individuals affected by SCZ and the need for targeted preventive interventions.

The long-term success and predictability of implant-supported restorations largely depends on the biomechanical forces (stresses) acting on implants and the surrounding alveolar bone in the mandible. The aim of our study was to investigate the biomechanical behavior of an edentulous mandible with an implant-supported full bridge on four implants under simulated masticatory forces, in the context of different loading schemes, using a three-dimensional finite element analysis (3D-FEA). A patient-specific 3D finite element model was constructed using pre- and post-implantation computer tomography (CT) images of a patient undergoing implant treatment. Simplified masticatory forces set at 300 N were exerted vertically on the denture in four different simulated load cases (LC1-LC4). Two sets of simulations for different implants and denture materials (S1: titanium and titanium; S2: titanium and cobalt-chromium, respectively) were made. Stress outputs were taken as maximum (P max ) and minimum principal stress (P min ) and equivalent stress (P eqv ) values. The highest peak P max values were observed for LC2 (where the modelled masticatory force excluded the cantilevers of the denture extending behind the terminal implants), both regarding the cortical bone (S1 P max : 89.57 MPa, S2 P max : 102.98 MPa) and trabecular bone (S1 P max : 3.03 MPa, S2 P max : 2.62 MPa). Overall, LC1-where masticatory forces covered the entire mesio-distal surface of the denture, including the cantilever-was the most advantageous. Peak P max values in the cortical bone and the trabecular bone were 14.97-15.87% and 87.96-94.54% higher in the case of S2, respectively. To ensure the long-term maintenance and longevity of treatment for implant-supported restorations in the mandible, efforts to establish the stresses of the surrounding bone in the physiological range, with the most even stress distribution possible, have paramount importance.

(1) Background: In cardiovascular applications, paclitaxel inhibits smooth muscle cell proliferation and migration and significantly reduces the occurrence of restenosis and target lesion revascularization. However, the cellular effects of paclitaxel in the myocardium are not well understood; (2) Methods: Wistar rats were divided into four groups: control (CTRL), isoproterenol (ISO) treated (1 mg/kg) and two groups treated with paclitaxel (PAC), which was administrated (10 mg/kg/day) for 5 days by gavage/per os alone or in combination (ISO + PAC) 3 weeks after ISO treatment. Ventricular tissue was harvested 24 h later for measurements of heme oxygenase (HO-1), reduced glutathione (GSH), oxidized glutathione (GSSG), superoxide dismutase (SOD), NF-κB, TNF-α and myeloperoxidase (MPO); (3) Results: HO-1 protein concentration, HO-1 activity, SOD protein concentration and total glutathione significantly decreased in response to ISO treatment. When PAC was administered in conjunction with ISO, HO-1, SOD concentration and total glutathione were not different from control levels. MPO activity, NF-κB concentration and TNF-α protein concentration were significantly increased in the ISO-only group, while the levels of these molecules were restored when PAC was co-administered; (4) Conclusions: Oral administration of PAC can maintain the expression of important antioxidants, anti-inflammatory molecules, HO-1, SOD and GSH, and suppress the production of TNF-α, MPO and NF-κB, which are involved in myocardial damage. The principal component of this cellular defense seems to be the expression of HO-1.

Dental implants are artificial dental roots anchoring prosthetic restorations to replace natural teeth. Dental implant systems may have different tapered conical connections. Our research focused on the mechanical examination of implant-superstructure connections. Thirty-five samples with 5 different cone angles (24°, 35°, 55°, 75°, and 90°) were tested for static and dynamic loads, carried out by a mechanical fatigue testing machine. Fixing screws were fixed with a torque of 35 Ncm before measurements. For static loading, samples were loaded with a force of 500 N in 20 s. For dynamic loading, the samples were loaded for 15,000 cycles with a force of 250 ± 150 N. In both cases, the compression resulting from load and reverse torque was examined. At the highest compression load of the static tests, a significant difference ( p = 0.021) was found for each cone angle group. Following dynamic loading, significant differences ( p < 0.001) for the reverse torques of the fixing screw were also shown. Static and dynamic results showed a similar trend: under the same loading conditions, changing the cone angle-which determines the relationship between the implant and the abutment-had led to significant differences in the loosening of the fixing screw. In conclusion, the greater the angle of the implant-superstructure connection, the smaller the screw loosening due to loading, which may have considerable effects on the long-term, safe operation of the dental prosthesis.

Work-related exposures affecting oral health are important factors of morbidity and decreased quality of life, which may emerge from numerous physical, chemical, or mental occupational exposures. Copper (Cu) is an important trace element, however, it may also cause allergies, depose and accumulate in the body, leading to acute and chronic toxicity. In the present report, we describe a rare phenomenon found during the examination of two professional brass players, after incidentally noting an artefact during magnetic resonance imaging (MRI) scans, which were performed to monitor bone healing after bone augmentation procedures in an unrelated clinical study. During a detailed workup of patient characteristics, data on medical history, lifestyle, professional habits related to playing the instrument, and oral health status were collected. Overall, both patients presented with similar histories, and the differences from the context of this study were not relevant; however, both brass players were using an uncoated Cu mouthpiece for over 15 years. Based on the imaging findings (a shadow in the area of the lips on the MRI images) and the organoleptic evaluation of the lips and mucosa of the individuals (temporary faint green discoloration), it is most likely that the brass players were affected by oxidized Cu accumulation in the lip. In contrast to several professions, musicians are usually not required by law to attend obligatory occupational health check-ups, which may facilitate the occurrence of such exposures in musicians. Clinicians should be on the lookout for brass players involved in the profession for a long time, who may have used the mouthpieces for an extended period of time, in addition to musicians affected by Wilson's disease. In patients affected by this phenomenon, diagnostics of oral cancer and prosthodontic procedures may be cumbersome, due to the detrimental impact on the utility of MRI imaging from artefact-formation and scattering.

The formation of a protective biofilm by Pseudomonas aeruginosa (PA) is one of the hallmarks of their survival both in vivo and in harsh environmental conditions, thus, biofilm-eradication has relevance from therapeutic perspectives and for infection control. The aim of our study was to investigate the possible relationship between antibiotic resistance, biofilm-forming capacity and virulence factors in n = 166 PA isolates of environmental origin. Antimicrobial susceptibility testing and the phenotypic detection of resistance determinants were carried out using standard protocols. The biofilm-forming capacity of PA was tested using a standardized crystal violet microtiter plate-based method. Motility (swimming, swarming, and twitching) and siderophore production of the isolates were also assessed. Resistance rates were highest for ciprofloxacin (46.98%), levofloxacin (45.18%), ceftazidime (31.92%) and cefepime (30.12%); 19.28% of isolates met the criteria to be classified as multidrug-resistant (MDR). Efflux pump overexpression, AmpC overexpression, and modified Hodge-test positivity were noted in 28.31%, 18.07% and 3.61%, respectively. 22.89% of isolates were weak/non-biofilm producers, while 27.71% and 49.40% were moderate and strong biofilm producers, respectively. Based on MDR status of the isolates, no significant differences in biofilm-production were shown among environmental PA (non-MDR OD570 [mean ± SD]: 0.416 ± 0.167 vs. MDR OD570: 0.399 ± 0.192; p > 0.05). No significant association was observed between either motility types in the context of drug resistance or biofilm-forming capacity (p > 0.05). 83.13% of isolates tested were positive for siderophore production. The importance of PA as a pathogen in chronic and healthcare-associated infections has been described extensively, while there is increasing awareness of PA as an environmental agent in agriculture and aquaculture. Additional studies in this field would be an important undertaking to understand the interrelated nature of biofilm production and antimicrobial resistance, as these insights may become relevant bases for developing novel therapeutics and eradication strategies against PA., Competing Interests: The authors declare no conflict of interest, monetary or otherwise. The authors alone are responsible for the content and writing of this article.

The aim of this pilot investigation was to develop a new animal model for studying the effects on osteogenesis of agents used in the guided bone regeneration technique. As test material, a mixture of two osseoconductive materials with different physico-chemical characteristics was used. One component of the mixture was Bio-Oss, a bovine hydroxyapatite; the other was Cerasorb, a synthetic tricalcium phosphate. The mixture consisited of 50 volume percent of Bio-Oss and 50 volume percent of Cerasorb. In in vivo pilot experiment, bone wounds were prepared in the proximal third of both femurs of rabbits. A Cerasorb + Bio-Oss mixture was inserted on the test side and the same amount of sterile buffered physiological solution on the control side. After healing for 4 weeks, the bone segments were embedded and cut without decalcification, using the Exact cutting and grinding system. The density of the newly-formed bone was evaluated histomorphometrically. On the Cerasorb + Bio-Oss test side the bone density was almost 1.5 times higher than that on the control side. These results demonstrated that the applied animal model is appropriate for investigation of the effects on osteogenesis of biocompatible graft materials such as Bio-Oss and Cerasorb.

Objectives: Graft insertion can effectively enhance the regeneration of debilitated bone. The effects of an alloplastic bone-replacing material, beta-tricalcium phosphate (Cerasorb), and of autogenous bone graft were compared., Materials and Methods: In 17 edentulous patients, the maxillary sinus floor was extremely atrophied to such an extent that implant placement was impossible. The Schneiderian membrane was surgically elevated bilaterally by insertion of Cerasorb (experimental side) and autogenous bone graft (control side). After surgery, the recovery was followed clinically and radiologically. After 6 months, 68 bone cylinders were excised from the grafted areas and implants were inserted into their places. The bone samples were embedded into resin, and the osteointegration of the grafts was studied histologically. Trabecular bone volume (TBV) and trabecular bone pattern factor (TBPf) were quantified by histomorphometry., Results: Cerasorb proved to be an effective bone-replacing material with osteoconductivity; it was capable of gradual disintegration, thereby providing space for the regenerating bone. The new bone density was not significantly different on the experimental and control sides (32.4+/-10.9% and 34.7+/-11.9%, respectively). However, the graft biodegradation was significantly slower on the experimental side than the control side. The TBPf value was lower on the control side than on the experimental side (-0.53+/-1.7 and -0.11+/-1.4 mm(-1), respectively), but this difference was not significant., Conclusions: Six months after insertion of the grafts, the bone of the augmented sinus floor was strong and suitable for anchorage of dental implants, irrespective of whether autogenous bone or Cerasorb particles had been applied.