Search

Several theories have been proposed to explain the co-existence of high conductivity and high salt concentration for water-in-salt electrolytes. Here, we fill the gap related to the structural, physical, and electrochemical properties of the LiTFSI–H2O binary system at high mol kg−1.

Acta crystallographica / B 77(6), 986 - 995 (2021). doi:10.1107/S2052520621010088, A new six-membered cyclic alkanolamine with chemical formula C$_6$H$_{15}$N$_3$O$_3$ was synthesized by the reaction of glycolaldehyde with gaseous ammonia. The molecular structure, characterized by a hexagonal ring of alternating carbon and nitro��gen atoms with three hy��droxy��methyl groups attached to the carbon atoms, could not be unambiguously determined by elemental analysis and $^1$H/$^{13}$C/$^{15}$N NMR. The molecular structure and conformation were further determined using a combination of vibrational spectroscopy (IR and Raman) and real-space pair distribution function (PDF) analysis. The crystal structure was determined ab initio from laboratory X-ray powder diffraction (XRPD) with orthorhombic space group Ama2 (No. 40) and unit-cell parameters a = 12.1054 (2) ��, b = 13.5537 (2) �� and c = 5.20741 (8) ��. Consistent structure models could be obtained by symmetry-independent PDF and PDF-Rietveld co-refinements. Independent local structure refinements indicate that the most likely deviations from the average structure consist of small tilting and translational distortions of hydrogen-bonded molecular stacks. Thermal analysis (TG/DTA) and temperature-dependent XRPD measurements were also performed to determine the thermal behavior., Published by Wiley-Blackwell, Oxford [u.a.]

This is a review of atomic pair distribution function (PDF) analysis as applied to the study of molecular materials. The PDF method is a powerful approach to study short- and intermediate-range order in materials on the nanoscale. It may be obtained from total scattering measurements using X-rays, neutrons, or electrons, and it provides structural details when defects, disorder, or structural ambiguities obscure their elucidation directly in reciprocal space. While its uses in the study of inorganic crystals, glasses, and nanomaterials have been recently highlighted, significant progress has also been made in its application to molecular materials such as carbons, pharmaceuticals, polymers, liquids, coordination compounds, composites, and more. Here, an overview of applications toward a wide variety of molecular compounds (organic and inorganic) and systems with molecular components is presented. We then present pedagogical descriptions and tips for further implementation. Successful utilization of the method requires an interdisciplinary consolidation of material preparation, high quality scattering experimentation, data processing, model formulation, and attentive scrutiny of the results. It is hoped that this article will provide a useful reference to practitioners for PDF applications in a wide realm of molecular sciences, and help new practitioners to get started with this technique.

The outstanding diversity of Zr-based frameworks is inherently linked to the variable coordination geometry of Zr-oxo clusters and the conformational flexibility of the linker, both of which allow for different framework topologies based on the same linker–cluster combination. In addition, intrinsic structural disorder provides a largely unexplored handle to further expand the accessibility of novel metal–organic frameworks (MOFs) structures that can be formed. In this work we report the concomitant synthesis of three topologically different MOFs based on the same M6O4(OH)4 clusters (M = Zr or Hf) and methane-tetrakis(p-biphenyl-carboxylate) (MTBC) linkers. Two novel structural models are presented based on single crystal diffraction analysis, namely cubic c (4,12)MTBC-M6 and trigonal tr (4,12)MTBC-M6, which comprise 12-coordinated clusters and 4 coordinated tetrahedral linkers. Notably, the cubic phase features a new architecture based on orientational cluster disorder, which is essential for its formation and has been analyzed by a combination of average structure refinements and diffuse scattering analysis from both powder and single crystal X-ray diffraction data. The trigonal phase also features structure disorder, although involving both linkers and secondary building units. In both phases, remarkable geometrical distortion of the MTBC linkers illustrates how linker flexibility is also essential for their formation and expands the range of achievable topologies in Zr-based MOFs and its analogues.

A Zr6-based metal–organic framework (MOF), MOF-808, is investigated for the adsorptive removal of IO3⁻ from aqueous solutions, due to its high surface area and abundance of open metal sites. The uptake kinetics, adsorption capacity and binding mode are studied, showing a maximum uptake capacity of 233 mg/g, the highest reported by any material.

We use powder X-ray diffraction under variable temperature to study the thermal expansion of the metal- organic framework PCN-222 with varying amounts of guest content. The thermal expansion increases drastically in magnitude as the guest occupancy is reduced. Upon cooling, the thermal expansion along c changes sign from negative to positive and the volumetric expansivity nearly quadruples in magnitude. This seemingly results from a reorganisation of the guest molecules and so our results highlight the intriguing interplay between framework dynamics and guest occupancy in mesoporous metal-organic frameworks.

CrystEngComm 24(12), 2305 - 2313 (2022). doi:10.1039/D2CE00162D, We demonstrate the ability to controllably desolvate a crystal-solvate system in a step-wise fashion through polymer-assisted grinding by varying the type and proportion of polymer agent used. A plausible mechanistic explanation is proposed based on a combination of experimental evidence and computational analysis. Specifically, Raman spectroscopy, total scattering pair distribution function analysis and computed reaction energies suggest that the desolvation process is associated with preferred interactions between the solvent molecules and specific polymers. This approach could potentially be extended to any type of material, including heat-sensitive materials, where classical desolvation by thermal processes is not possible, and provides an additional route for formulation processing., Published by RSC, London

Chemical science 13(28), 8253 - 8264 (2022). doi:10.1039/D2SC02282F, The incorporation of molecular machines into the backbone of porous framework structures will facilitate nano actuation, enhanced molecular transport, and other out-of-equilibrium host–guest phenomena in well-defined 3D solid materials. In this work, we detail the synthesis of a diamine-based light-driven molecular motor and its incorporation into a series of imine-based polymers and covalent organic frameworks (COF). We study structural and dynamic properties of the molecular building blocks and derived self-assembled solids with a series of spectroscopic, diffraction, and theoretical methods. Using an acid-catalyzed synthesis approach, we are able to obtain the first crystalline 2D COF with stacked hexagonal layers that contains 20 mol% molecular motors. The COF features a specific pore volume and surface area of up to 0.45 cm$^3$ g$^{−1}$ and 604 m$^2$ g$^{−1}$, respectively. Given the molecular structure and bulkiness of the diamine motor, we study the supramolecular assembly of the COF layers and detail stacking disorders between adjacent layers. We finally probe the motor dynamics with in situ spectroscopic techniques revealing current limitations in the analysis of these new materials and derive important analysis and design criteria as well as synthetic access to new generations of motorized porous framework materials., Published by RSC, Cambridge

Sodium thiophosphates are promising materials for large-scale energy storage applications benefiting from high ionic conductivities and the geopolitical abundance of the elements. A representative of this class is Na

Sodium thiophophates are promising materials for large-scale energy storage applications benefiting from high ionic conductivities and the-political abundance of the elements. A representative of this class is Na4P2S6, which currently shows two known polymorphs–α and β. This work describes a third polymorph of Na4P2S6, γ, that forms above 580◦C, exhibits fast ion conduction with low activation energy, and is mechanically soft. Based on high-temperature diffraction, pair distribution function analysis, thermal analysis, impedance spectroscopy, and ab initio molecular dynamic calculations, γ-Na4P2S6 is identified to be a plastic crystal, characterized by dynamic orientational disorder of the P2S64– anions on a translationally fixed body centered cubic lattice. The prospect of stabilizing plastic crystals at operating temperatures of solid-state batteries and benefiting from their high ionic conductivities as well as mechanical properties could have a strong impact in the field of solid-state battery chemistry.

Carbon nitrides are among the most studied materials for photocatalysis, however, limitations arise from inefficient charge separation and transport within the material. Here, this aspect is addressed in the 2D carbon nitride poly(heptazine imide) (PHI) by investigating the influence of various counterions, such as M = Li+, Na+, K+, Cs+, Ba2+, NH4+ and tetramethyl ammonium, on the material’s conductivity and photocatalytic activity. These ions in the PHI pores affect the stacking of the 2D layers, which further influences the predominantly ionic conductivity in M-PHI. Na-containing PHI outperforms the other M-PHI in various relative humidity (RH) environments (0-42 %RH) in terms of conductivity, likely due to pore channel geometry and size of the (hydrated) ion. With increasing RH, the ionic conductivity increases by 4-5 orders of magnitude (for Na-PHI up to 10-5 S cm-1 at 42 %RH). At the same time, the highest photocatalytic hydrogen evolution rate is observed for Na-PHI, which is mirrored by increased photo-generated charge carrier lifetimes, pointing to efficient charge carrier stabilization by mobile ions. These results indicate that ionic conductivity is an important parameter that can influence the photocatalytic activity. Besides, RH-dependent ionic conductivity is of high interest for separators, membranes, or sensors.

Solving the structure of carbon nitrides has been a long-standing challenge due to the low crystallinity and complex structures observed within this class of earth-abundant photocatalysts. Herein, we report on two-dimensional layered potassium poly(heptazine imide) (K-PHI) and its proton-exchanged counterpart (H-PHI), obtained by ionothermal synthesis using a molecular precursor route. We present a comprehensive analysis of the in-plane and three-dimensional structure of PHI. Transmission electron microscopy and solid-state NMR spectroscopy, supported by quantum-chemical calculations, suggest a planar, imide-bridged heptazine backbone with trigonal symmetry in both K-PHI and H-PHI, whereas pair distribution function analyses and X-ray powder diffraction using recursive-like simulations of planar defects point to a structure-directing function of the pore content. While the out-of-plane structure of K-PHI exhibits a unidirectional layer offset, mediated by hydrated potassium ions, H-PHI is characterized by a high degree of stacking faults due to the weaker structure directing influence of pore water. Structure-property relationships in PHI reveal that a loss of in-plane coherence, materializing in smaller lateral platelet dimensions and increased terminal cyanamide groups, correlates with improved photocatalytic performance. Size-optimized H-PHI is highly active toward photocatalytic hydrogen evolution, with a rate of 3363 mu mol/gh H-2 placing it on par with the most active carbon nitrides. K- and H-PHI adopt a uniquely long-lived photoreduced polaronic state in which light-induced electrons are stored for more than 6 h in the dark and released upon addition of a Pt cocatalyst. This work highlights the importance of structure- property relationships in carbon nitrides for the rational design of highly active hydrogen evolution photocatalysts.

A major challenge to the implementation of artificial photosynthesis (AP), in which fuels are produced from abundant materials (water and carbon dioxide) in an electrochemical cell through the action of sunlight, is the discovery of active, inexpensive, safe, and stable catalysts for the oxygen evolution reaction (OER). Multimetallic molecular catalysts, inspired by the natural photosynthetic enzyme, can provide important guidance for catalyst design, but the necessary mechanistic understanding has been elusive. In particular, fundamental transformations for reactive intermediates are difficult to observe, and well-defined molecular models of such species are highly prone to decomposition by intermolecular aggregation. Here, we present a general strategy for stabilization of the molecular cobalt-oxo cubane core (Co4O4) by immobilizing it as part of metal-organic frameworks, thus preventing intermolecular pathways of catalyst decomposition. These materials retain the OER activity and mechanism of the molecular Co4O4 analog yet demonstrate unprecedented long-term stability at pH 14. The organic linkers of the framework allow for chemical fine-tuning of activity and stability and, perhaps most importantly, provide "matrix isolation" that allows for observation and stabilization of intermediates in the water-splitting pathway.

Metal-organic frameworks (MOFs) are promising nanoporous materials for the adsorptive capture and separation of noble gases at room temperature. Among the numerous MOFs synthesized and tested for noble gas separations, Ni(PyC)₂ (PyC = pyridine-4-carboxylate) exhibits one of the highest xenon/krypton selectivities at room temperature. Like lead-optimization in drug discovery, here we aim to tune the chemistry of Ni(PyC)₂, by appending a functional group to its PyC ligands, to maximize its Xe/Kr selectivity. To guide experiments in the laboratory, we virtually screen Ni(PyC-X)₂ (X=functional group) structures for noble gas separations by (i) constructing a library of Ni(PyC-X)₂ crystal structure models then (ii) using molecular simulations to predict noble gas (Xe, Kr, Ar) adsorption and selectivity at room temperature in each structure. The virtual screening predicts several Ni(PyC-X)₂ structures to exhibit a higher Xe/Kr, Xe/Ar, and Kr/Ar selectivity than the parent Ni(PyC)₂ MOF, with Ni(PyC-m-NH₂)₂ among them. In the laboratory, we synthesize Ni(PyC-m-NH₂)₂, determine its crystal structure by X-ray powder diffraction, and measure its Xe, Kr, and Ar adsorption isotherms (298 K). In agreement with our molecular simulations, the Xe/Kr, Xe/Ar, and Kr/Ar selectivities of Ni(PyC-m-NH₂)₂ exceed those of the parent Ni(PyC)₂. Particularly, Ni(PyC-m-NH₂)₂ exhibits a [derived from experimental, equilibrium adsorption isotherms] Xe/Kr selectivity of 20 at dilute conditions and 298 K, compared to 17 for Ni(PyC)₂. According to in situ X-ray diffraction, corroborated by molecular models, Ni(PyC-m-NH₂)₂ presents well-defined binding pockets tailored for Xe and organized along its one-dimensional channels. In addition to discovering the new, performant Ni(PyC-m-NH₂)₂ MOF for noble gas separations, our study illustrates the computation-informed optimization of the chemistry of a "lead" MOF to target adsorption of a specific gas.

Chemistry of materials 33(18), 7337 - 7349 (2021). doi:10.1021/acs.chemmater.1c01755, While two-dimensional (2D) materials may preserve some intrinsic properties of the corresponding layered bulk material, new characteristics arise from their pronounced anisotropy or confinement effects. Recently, exceptionally high ionic conductivities were discovered in 2D materials such as graphene oxide and vermiculite. Here, we report on the water-assisted fast conduction of lithium ions in restacked lithium tin sulfide nanosheets. Li$_{0.8}$Sn$_{0.8}$S$_2$ exfoliates spontaneously in water and can be restacked into homogeneous films in which the lithium content is decreased, and a partial substitution of sulfur with hydroxyl groups takes place. Using a recursive supercell refinement approach in reciprocal space along with real-space pair distribution function analysis, we describe restacked lithium tin sulfide as a partially turbostratically disordered material composed of lithium-containing and lithium-depleted layers. In humid air, the material takes up multiple layers of water that coordinate lithium ions in the space between the layers, increasing the stacking distance and screening the interaction between lithium ions and the anionic layers. This results in a 1000-fold increase in ionic conductivity up to 47 mS cm$^{���1}$ at high humidities. Orientation-dependent impedance spectroscopy suggests a facile in-plane conduction and a hindered out-of-plane conduction. Pulsed field gradient nuclear magnetic resonance spectroscopy reveals a fast, simultaneous diffusion of a majority and a minority species for both 7Li and 1H, suggesting water-assisted lithium diffusion to be at play. This study enlarges the family of nanosheet-based ionic conductors and helps to rationalize the transport mechanism of lithium ions enabled by hydration in a nanoconfined 2D space., Published by American Chemical Society, Washington, DC

Covalent organic frameworks have emerged as a powerful synthetic platform for installing and interconverting dedicated molecular functions on a crystalline polymeric backbone with atomic precision. Here, we present a novel strategy to directly access amine-linked covalent organic frameworks, which serve as a scaffold enabling pore-wall modification and linkage-interconversion by new synthetic methods based on Leuckart-Wallach reduction with formic acid and ammonium formate. Frameworks connected entirely by secondary amine linkages, mixed amine/imine bonds, and partially formylated amine linkages are obtained in a single step from imine-linked frameworks, or directly from corresponding linkers in a one-pot crystallisation-reduction approach. The new, 2D amine-linked covalent organic frameworks, rPI-3-COF, rTTI-COF, and rPy1P-COF, are obtained with high crystallinity and large surface areas. Secondary amines, installed as reactive-sites on the pore wall, enable further post-synthetic functionalisation to access tailored covalent organic frameworks, with increased hydrolytic stability, as potential heterogeneous catalysts.

Porphyrin-based metal-organic frameworks (MOFs), exemplified by the prototypical representatives MOF-525, PCN-221, and PCN-224 are among the most promising MOF systems for catalysis, optoelectronics, and solar energy conversion. However, subtle differences between synthetic protocols for these three MOFs give rise to vast discrepancies in purported product outcomes and description of framework topologies. Here, we reveal the type and disorder of the Zr-clusters based on a comprehensive synthetic and structural analysis spanning local and long-range length scales. Our analysis on PCN-221 reveals Zr6O4(OH)4 clusters in four distinct orientations within the unit cell, rather than Zr8O6 clusters as originally published, accompanied by random linker vacancies around 50%. We propose disordered PCN-224 (dPCN-224) as a unified model to understand PCN-221, MOF-525, and PCN-224 by varying the degree of orientational cluster disorder, linker conformation and vacancies, and cluster—linker binding. Our work thus introduces a new perspective on network topology and disorder in Zr-MOFs and pinpoints the structural variables that direct their functional properties.

Structural and morphological interplay between hard and soft phases determine the bulk properties of thermoplastic polyurethanes. Commonly employed techniques rely on different physical or chemical phenomena for characterizing the organization of domains, but detailed structural information can be difficult to derive. Here, total scattering pair distribution function (PDF) analysis is used to determine atomic-scale insights into the connectivity and molecular ordering and compared to the domain size and morphological characteristics measured by AFM, TEM, SAXS, WAXS, and solid-state NMR 1H–1H spin-diffusion. In particular, density distribution functions are highlighted as a means to bridging the gap from the domain morphology to intradomain structural ordering. High real-space resolution PDFs are shown to provide a sensitive fingerprint for indexing aromatic, aliphatic, and polymerization-induced bonding characteristics, as well as the hard phase structure, and indicate that hard phases coexist in both ordered and disordered states.

Our objective was to characterize the physicochemical properties of amorphous sucrose prepared by freeze-drying (FreD), spray-drying (SprayD), ball milling (BallM), melt-quenching (MeltQ), and spin-melt-quenching (SpinMeltQ). Scanning electron microscopy indicated that FreD, SprayD, BallM, and SpinMeltQ formed distinct particles, while MeltQ formed a single mass. Powder X-ray diffraction confirmed that BallM was semi-crystalline, while FreD, SprayD, MeltQ, and SpinMeltQ were amorphous. However, total scattering pair distribution function analysis of synchrotron X-ray diffraction data suggested that local molecular-level ordering differences existed between MeltQ and FreD, SprayD, and SpinMeltQ. Chromatographic analyses revealed that thermal decomposition indicator compounds were present in BallM, MeltQ, and SpinMeltQ, but not in FreD and SprayD. All samples exhibited a glass transition. Additionally, FreD, SprayD, BallM, and SpinMeltQ exhibited an exothermic cold crystallization peak, but MeltQ did not. Overall, this research provides evidence that sucrose is a material whose physicochemical properties are strongly influenced by amorphization method.

Processing procedures for inducing domain size reduction and/or amorphous phase generation can be crucial for enhancing the bioavailability of active pharmaceutical ingredients (APIs). It is important to quantify these reduced coherence phases and to detect and characterize associated structural changes, to ensure that no deleterious effects on safety, function, or stability occur. Here, X-ray powder diffraction (XRPD), total scattering pair distribution function (TSPDF) analysis, and solid-state nuclear magnetic resonance spectroscopy (SSNMR) have been performed on samples of GSK2838232B, an investigational drug for the treatment of human immunodeficiency virus (HIV). Preparations were obtained through different mechanical treatments resulting in varying extents of domain size reduction and amorphous phase generation. Completely amorphous formulations could be prepared by milling and microfluidic injection processes. Microfluidic injection was shown to result in a different local structure due to dispersion with dichloromethane (DCM). Implications of combined TSPDF and SSNMR studies to characterize molecular compounds are also discussed, in particular, the possibility to obtain a thorough structural understanding of disordered samples from different processes.

Thermolysis of a pair of dibenzo-7-phosphanorbornadiene compounds is shown to lead to differing behaviors: phosphinidene sulfide release and formation of amorphous P2S. These compounds, tBuP(S)A (1, A = C14H10 or anthracene; 59% isol. yield) and HP(S)A (2; 63%), are available through thionation of tBuPA and the new secondary phosphine HPA (5), prepared from Me2NPA and DIBAL-H in 50% yield. Phosphinidene sulfide [ tBuP═S] transfer is shown to proceed efficiently from 1 to 2,3-dimethyl-1,3-butadiene to form Diels-Alder product 3 with a zero-order dependence on diene. Platinum complex (Ph3P)2Pt(η2- tBuPS) (4, 47%) is also accessed from 1 and structurally characterized. In contrast, heating parent species 2 (3 h, 135 °C) under vacuum instead produces an insoluble, nonvolatile yellow residual material 6 of composition P2S that displays semiconductor properties with an optical band gap of 2.4 eV. Material 6 obtained in this manner from molecular precursor 2 is in a poorly characterized portion of the phosphorus-sulfur phase diagram and has therefore been subjected to a range of spectroscopic techniques to gain structural insight. X-ray spectroscopic and diffraction techniques, including Raman, XANES, EXAFS, and PDF, reveal 6 to have similarities with related compounds including P4S3, Hittorf's violet phosphorus. Various possible structures have been explored as well using quantum chemical calculations under the constraint that each phosphorus atom is trivalent with no terminal sulfide groups, and each sulfur atom is divalent. The structural conclusions are supported by data from phosphorus-31 magic angle spinning (MAS) solid state NMR spectroscopy, bolstering the structural comparisons to other phosphorus-sulfur systems while excluding the formulation of P2S as a simple mixture of P4S3 and phosphorus.

In this report, we have synthesized and structurally characterized nanowire bundles of cobalt-substituted pyroxenes, similar to the crystal structure of aegirine (i.e. Co-substituted XYSi2O6 with X and Y referring to metallic elements such as but not limited to Co, Na, and Fe), using a readily scalable hydrothermal technique. We propose a growth mechanism for these bundles, based on detailed time and temperature dependent studies as well as complementary control experiments, particularly reactions in the absence of either 3-aminopropyltriethoxysilane (APTES) or sodium hydroxide (NaOH), via a transmission electron microscopy visualization study. Moreover, these nanowire bundles were probed for their magnetic properties and chemical composition using superconducting quantum interference device (SQUID) measurements, X-ray diffraction, and pair distribution function analysis, respectively. Specifically, SQUID measurement observations highlighted that these bundles evince (i) unique and interesting super-paramagnetic properties at 5 K that are consistent with that of our previously published ∼2 nm ultra-small nanoparticles as well as (ii) paramagnetic behavior at 300 K.

Given the wide-ranging potential applications of metal organic frameworks (MOFs), an emerging imperative is to understand their formation with atomic scale precision. This will aid in designing syntheses for next-generation MOFs with enhanced properties and functionalities. Major challenges are to characterize the early-stage seeds, and the pathways to framework growth, which require synthesis coupled with in situ structural characterization sensitive to nanoscale structures in solution. Here we report measurements of an in situ synthesis of a prototypical MOF, ZIF-8, utilizing synchrotron X-ray atomic pair distribution function (PDF) analysis optimized for sensitivity to dilute species, complemented by mass spectrometry, electron microscopy, and density functional theory calculations. We observe that despite rapid formation of the crystalline product, a high concentration of Zn(2-MeIm)4 (2-MeIm = 2-methylimidazolate) initially forms and persists as stable clusters over long times. A secondary, amorphous phase also pervades during the synthesis, which has a structural similarity to the final ZIF-8 and may act as an intermediate to the final product.

Magic-sized clusters (MSCs) can provide valuable insight into the atomically precise progression of semiconductor nanocrystal transformations. We report the conversion of an InP MSC to a Cd3P2 MSC through a cation exchange mechanism and attempt to shed light on the evolution of the physical and electronic structure of the clusters during the transformation. Utilizing a combination of spectroscopic (NMR/UV–vis) and structural characterization (ICP-OES/MS/PXRD/XPS/PDF) tools, we demonstrate retention of the original InP MSC crystal lattice as Z-type ligand exchange initially occurs. Further cation exchange induces lattice relaxation and a significant structural rearrangement. These observations contrast with reports of cation exchange in InP quantum dots, indicating unique reactivity of the InP MSC.

The particle size of supported catalysts is a key characteristic for determining structure–property relationships. It is a challenge to obtain this information accurately and in situ using crystallographic methods owing to the small size of such particles (

Interactions between extended π-systems are often invoked as the main driving force for stacking and crystallization of 2D organic polymers. In covalent organic frameworks (COFs), the stacking strongly influences properties such as the accessibility of functional sites, pore geometry, and surface states, but the exact nature of the interlayer interactions is mostly elusive. The stacking mode is often identified as eclipsed based on observed high symmetry diffraction patterns. However, as pointed out by various studies, the energetics of eclipsed stacking are not favorable and offset stacking is preferred. This work presents lower and higher apparent symmetry modifications of the imine-linked TTI-COF prepared through high- and low-temperature reactions. Through local structure investigation by pair distribution function analysis and simulations of stacking disorder, we observe random local layer offsets in the low temperature modification. We show that while stacking disorder can be easily overlooked due to the apparent crystallographic symmetry of these materials, total scattering methods can help clarify this information and suggest that defective local structures could be much more prevalent in COFs than previously thought. A detailed analysis of the local structure helps to improve the search for and design of highly porous tailor-made materials., With total scattering methods and stacking fault simulations, we observe previously predicted random local layer offsets in a COF, which are typically disguised by the apparent crystallographic symmetry but strongly influence properties.

A major challenge to the implementation of artificial photosynthesis (AP), in which fuels are produced from abundant materials (water and carbon dioxide) in an electrochemical cell through the action of sunlight, is the discovery of active, inexpensive, safe, and stable catalysts for the oxygen evolution reaction (OER). Multimetallic molecular catalysts, inspired by the natural photosynthetic enzyme, can provide important guidance for catalyst design, but the necessary mechanistic understanding has been elusive. In particular, fundamental transformations for reactive intermediates are difficult to observe, and well-defined molecular models of such species are highly prone to decomposition by intermolecular aggregation. Here, we present a general strategy for stabilization of the molecular cobalt-oxo cubane core (Co

A new approach is presented to obtain candidate structures from atomic pair distribution function (PDF) data in a highly automated way. It fetches, from web-based structural databases, all the structures meeting the experimenter's search criteria and performs structure refinements on them without human intervention. It supports both x-ray and neutron PDFs. Tests on various material systems show the effectiveness and robustness of the algorithm in finding the correct atomic crystal structure. It works on crystalline and nanocrystalline materials including complex oxide nanoparticles and nanowires, low-symmetry and locally distorted structures, and complicated doped and magnetic materials. This approach could greatly reduce the traditional structure searching work and enable the possibility of high-throughput real-time auto analysis PDF experiments in the future., Comment: 41 pages, 8 figures

The promise of using electromagnetic (EM) fields for low temperature materials synthesis is limited by our ability to structurally characterize these materials, which are often nanocrystalline or amorphous. Here we demonstrate that synchrotron X-ray radiation coupled with the recently developed thin film pair distribution function (tfPDF) analysis yields quantitative information about mixtures of crystalline and non-crystalline materials synthesized under EM excitation, which represents a new direction to study the chemical reactions and lattice ordering induced by EM fields. Our experiments demonstrate for the first time that ceramic oxide films of titanium dioxide (TiO2) grown under microwave radiation (MWR) exposure contain a different phase composition and increased crystallinity compared to TiO2 grown at similar temperatures without EM fields. Specifically, the field-assisted TiO2 is composed of a mixed-phase structure consisting of long-range anatase TiO2 phase with short-range amorphous components, while furnace-grown materials are amorphous with local ordering most resembling the brookite phase of TiO2. The disordered component of MWR-grown TiO2 results in a slightly narrower energy band gap relative to fully crystalline anatase, indicating enhanced light absorption in the visible spectrum. The impact of EM field-influenced atomic structure on resultant material properties creates the opportunity to utilize MWR-assisted synthesis as a novel method for rapid, single-step, low temperature synthesis of mixed ordered-disordered materials for potential use in photocatalysis, thermoelectrics, or lithium ion batteries.

Lead halide perovskites such as methylammonium lead triiodide (MAPI) have outstanding optical and electronic properties for photovoltaic applications, yet a full understanding of how this solution processable material works so well is currently missing. Previous research has revealed that MAPI possesses multiple forms of static disorder regardless of preparation method, which is surprising in light of its excellent performance. Using high energy resolution inelastic X-ray (HERIX) scattering, we measure phonon dispersions in MAPI and find direct evidence for another form of disorder in single crystals: large amplitude anharmonic zone-edge rotational instabilities of the PbI_6 octahedra that persist to room temperature and above, left over from structural phase transitions that take place tens to hundreds of degrees below. Phonon calculations show that the orientations of the methylammonium couple strongly and cooperatively to these modes. The result is a non-centrosymmetric, instantaneous local structure, which we observe in atomic pair distribution function (PDF) measurements. This local symmetry breaking is unobservable by Bragg diffraction, but can explain key material properties such as the structural phase sequence, ultra low thermal transport, and large minority charge carrier lifetimes despite moderate carrier mobility., 30 pages, 11 figures

Limited long-range ordering and the presence of both hard and soft segments can cause substantial difficulties for structure determination in urethane elastomers. Here, the structuring has been investigated for a series of thermoplastic polyurethanes composed of 4,4′-methylene diphenyl diisocyanate and 1,4-butanediol. We utilize pair distribution function analysis of X-ray total scattering measurements to directly access the local structure and quantify the degree of ordering, showing that the structure varies significantly over the range of different component ratios investigated. A simple method is demonstrated for evaluating the viability of various structure candidates for the hard segment. The nature of the molecular conformations and packing is verified, allowing both ordered and disordered components to be quantified through structural modeling.

For poorly water soluble drugs, the amorphous state provides an avenue to enhance oral bioavailability. The preparation method, in addition to sample history, can dictate the nature and the stability of the amorphous phase. Conventionally, X-ray powder diffractometry is of limited utility for characterization, but structural insights into amorphous and nanocrystalline materials have been enabled by coupling X-ray total scattering with the pair distribution function. This has shown great promise for fingerprinting, quantification, and even modeling of amorphous pharmaceutical systems. A consequence of the physical instability of amorphous phases is their crystallization propensity, and recent instrumental advances have substantially enhanced our ability to detect and quantify crystallization in a variety of complex matrices. The International Centre for Diffraction Data has a collection of the X-ray diffraction patterns of amorphous drugs and excipients and, based on the available supporting information, provides a quality mark of the data.

The pair distribution function (PDF) is a versatile tool to describe the structure of disordered and amorphous materials. Electron PDF (ePDF) uses the advantage of strong scattering of electrons, thus allowing small volumes to be probed and providing unique information on structure variations at the nano-scale. The spectrum of ePDF applications is rather broad: from ceramic to metallic glasses and mineralogical to organic samples. The quantitative interpretation of ePDF relies on knowledge of how structural and instrumental effects contribute to the experimental data. Here, a broad overview is given on the development of ePDF as a structure analysis method and its applications to diverse materials. Then the physical meaning of the PDF is explained and its use is demonstrated with several examples. Special features of electron scattering regarding the PDF calculations are discussed. A quantitative approach to ePDF data treatment is demonstrated using different refinement software programs for a nanocrystalline anatase sample. Finally, a list of available software packages for ePDF calculation is provided.

Thermolysis of a pair of dibenzo-7-phosphanorbornadiene compounds is shown to lead to differing behaviors: phosphinidene sulfide release and formation of amorphous P

Total scattering pair distribution function (TSPDF) analysis of synchrotron X-ray diffraction data has been used to study the structural characteristics of amorphous lactose and its subsequent recrystallization on aging. This shows that the recrystallization kinetics vary substantially between spray dried, lyophilized, and melt quenched samples aged at 40 °C/75% relative humidity (RH), although all samples consistently form the stable α monohydrate when crystallization does occur. Using TSPDF it was possible to quantify the amount of amorphous and crystalline phases present, as well as to extract other structural information such as crystallite size, as a function of time during aging from the different starting materials. We also were able to determine a correlation between a higher degree of local molecular ordering in the amorphous phase with decreased stability against recrystallization. This study shows the rich information that may be obtained from a TSPDF analysis of recrystallization from the amor...

We report on the role of magic-sized clusters (MSCs) as key intermediates in the synthesis of indium phosphide quantum dots (InP QDs) from molecular precursors. Heterogeneous growth from the MSCs directly to InP QDs was observed without intermediate sized particles. These observations suggest that previous efforts to control nucleation and growth by tuning precursor reactivity have been undermined by formation of these kinetically persistent MSCs prior to QD formation. The thermal stability of InP MSCs is influenced by the presence of exogenous bases as well as choice of the anionic ligand set. Addition of a primary amine, a common additive in previous InP QD syntheses, to carboxylate-terminated MSCs was found to bypass the formation of MSCs, allowing for homogeneous growth of InP QDs through a continuum of isolable sizes. Substitution of the carboxylate ligand set for a phosphonate ligand set increased the thermal stability of one particular InP MSC to 400 °C. The structure and optical properties of the ...

Difference atomic pair distribution function methods have been applied to detect and characterize nanoparticles suspended in a solvent at very dilute concentrations. We specifically consider nanoparticles of a pharmaceutical compound in aqueous solution using X-ray PDF methods, a challenging case due to the low atomic number of the nanoparticle species. The nanoparticles were unambiguously detected at the level of 0.25 wt%. Even at these low concentrations the signals were highly reproducible, allowing for reliable detection and quantitative analysis of the nanoparticle structure.

The structures of Zr(IV) phosphonate-phosphate based, unconventional metal organic framework materials have been determined using atomic pair distribution function analysis of high energy, X-ray total scattering diffraction data. They are found to form as nanocrystalline layers of Zr phosphate, similar to the bulk, but with a high degree of interlayer disorder and intermediate intralayer order extending around 5 nm. These materials are of interest for their high selectivity for 3+ lanthanide ions. To investigate the mechanism of the selectivity, we utilize difference pair distribution function analysis to extract the local structural environment of Tb3+ ions loaded into the framework. The ions are found to sit between the layers in a manner resembling the local environment of Tb in Scheelite-type terbium phosphate. By mapping this local structure onto that of the refined structure for zirconium-phenyl-phosphonate, we show how dangling oxygens from the phosphate groups, acting like nose hairs, are able to ...

Crystal defects in highy luminescent colloidal nanocrystals (NCs) of CsPbX3 perovskites (X = Cl, Br, I) are investigated. Here, using X-ray total scattering techniques and the Debye scattering equation (DSE), we provide evidence that the local structure of these NCs always exhibits orthorhombic tilting of PbX6 octahedra within locally ordered subdomains. These subdomains are hinged through a two-/three-dimensional (2D/3D) network of twin boundaries through which the coherent arrangement of the Pb ions throughout the whole NC is preserved. The density of these twin boundaries determines the size of the subdomains and results in an apparent higher-symmetry structure on average in the high-temperature modification. Dynamic cooperative rotations of PbX6 octahedra are likely at work at the twin boundaries, causing the rearrangement of the 2D or 3D network, particularly effective in the pseudocubic phases. An orthorhombic, 3D γ-phase, isostructural to that of CsPbBr3 is found here in as-synthesized CsPbI3 NCs., ACS Nano, 11 (4), ISSN:1936-0851, ISSN:1936-086X

Spintronics holds the promise of novel functionality and higher device performance, but a massive challenge is to find semiconducting materials with good electronic properties that are also ferromagnetic. Dilute magnetic semiconductors (DMS) such as Mn-doped GaAs have great potential but are notoriously difficult to make, only stabilizing in thin films in most cases. Recently, a promising new class of DMS materials based on the chemistry and structure of iron-based superconductors has been discovered, including the compound (Ba,K)(Zn,Mn)${}_{2}$As${}_{2}$. These materials can be synthesized in bulk form, providing an unprecedented opportunity to study the mechanism of ferromagnetism in semiconductors. In this work, the authors present detailed temperature-dependent characterization of the atomic and magnetic structure of (Ba,K)(Zn,Mn)${}_{2}$As${}_{2}$ using x-ray and neutron pair distribution function techniques, establishing the existence of an unexpected structural distortion on a short length scale and surprisingly robust short-range ferromagnetic correlations that persist even at room temperature. These results fill in important gaps in the experimental understanding of DMS materials and provide valuable guidance to their theoretical description.

Lanthanide-containing nanoscale particles have been widely explored for various biomedical purposes, however, they are often prone to metal leaching. Here we have created a new coordination polymer (CP) by applying, for the first time, a stable Gdchelate as building block in order to prevent any fortuitous release of free lanthanide(III) ion. The use of the Gd-DOTA-4AmP complex as a design element in the CP allows not only for enhanced relaxometric properties (maximum r=16.4 mmsat 10 MHz), but also for a pH responsiveness (Δr=108 % between pH 4 and 6.5), beyond the values obtained for the low molecular weight Gd-DOTA-4AmP itself. The CP can be miniaturised to the nanoscale to form colloids that are stable in physiological saline solution and in cell culture media and does not show cytotoxicity., This work was supported by the MINECO-Spain through projects PN MAT2012-30994. I.I. and J.A.S. thank the MINECO for a RyC contract and a predoctoral FPU grant, respectively. J.A. is grateful to the Generalitat de Catalunya for a predoctoral FI grant. ICN2 is supported by the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV-2013-0295. M.T.acknowledges support from the US Department of Energy NEUP #DE-NE 0000746 and S. J. L. Billinge for helpful discussion. Use of the National Synchrotron Light SourceII, Brookhaven National Laboratory, was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-SC0012704. E.T. and C.S.B. acknowledge financial support of the Ligue contre le Cancer (France).

Under the terms of the Creative Commons Attribution license (3.0 Unported or 4.0 International).-- et al., We report measurements and theoretical analysis of resonant spin tunneling in randomly oriented nanospheres of a molecular magnet. Amorphous nanospheres of Mn 12 acetate have been fabricated and characterized by chemical, infrared, TEM, x-ray, and magnetic methods. Magnetic measurements have revealed sharp tunneling peaks in the field derivative of the magnetization that occur at the typical resonant field values for the Mn 12 acetate crystal in the field parallel to the easy axis. Theoretical analysis is provided that explains these observations. We argue that resonant spin tunneling in a molecular magnet can be established in a powder sample, without the need for a single crystal and without aligning the easy magnetization axes of the molecules. This is confirmed by reanalyzing the old data on a powdered sample of nonoriented micron-size crystals of Mn 12 acetate. Our findings can greatly simplify the selection of candidates for quantum spin tunneling among newly synthesized molecular magnets., The work at the University of Barcelona has been supported by Spanish Government Project No. MAT2011-23698. S.L. acknowledges financial support from the FPU Program of Ministerio de Educacion, Cultura, y Deporte of the Spanish Government. I.I. and J.E. thank the MINECO for the Ramon y Cajal contract and the FPI fellowship, respectively. The work of E.M.C. at Lehman College is supported by the US National Science Foundation through Grant No. DMR-1161571. S.J.L.B. was supported by DOE-BES under Contract No. DE-AC02-98CH10886.