Search

The need for sustainable, biodegradable materials to address environmental challenges, such as oil-water separation, is growing. Cellulose-based absorbents offer an eco-friendly alternative to synthetic materials. However, their hydrophobicity must be enhanced for efficient application. In this study, cellulose-based sorbents derived from Kraft and half-bleached chemo-thermomechanical pulp (BCTMP) were hydrophobized using silanization and alkyl ketene dimer (AKD) techniques. Hydrophobic properties were successfully imparted using methyltrimethoxysilane (MTMOS), n-octyltriethoxysilane (NTES), and N-(2-Aminoethyl)-3-aminopropyltrimethoxysilane (AATMS), with water contact angles ranging from 120° to 140°. The water sorption capacity was significantly reduced to below 1 g/g, whereas the oil sorption capacity remained high (19–28 g/g). The most substantial reduction in water vapor absorption (3–6%) was observed for the MTMOS- and AATMS-silanized samples. These results demonstrate the potential of hydrophobized cellulose-based sorbents as sustainable alternatives for oil-water separation, contributing to environmentally friendly water treatment solutions. [ABSTRACT FROM AUTHOR]

Nanocellulose is a nanostructured form of cellulose, which retains valuable properties of cellulose such as renewability, biodegradability, biocompatibility, nontoxicity, and sustainability and, due to its nano-sizes, acquires several useful features, such as low density, high aspect ratio and stiffness, a high specific surface area, easy processing and functionalisation, and good thermal stability. All these make it a highly versatile green nanomaterial for multiple applications, including the conservation of cultural heritage. This review provides the basic characteristics of all nanocellulose forms and their properties and presents the results of recent research on nanocellulose formulations applied for conserving historical artefacts made of wood and paper, discussing their effectiveness, advantages, and disadvantages. Pure nanocellulose proves particularly useful for conserving historical paper since it can form a durable, stable coating that consolidates the surface of a degraded object. However, it is not as effective for wood consolidation treatment due to its poor penetration into the wood structure. The research shows that this disadvantage can be overcome by various chemical modifications of the nanocellulose surface; owing to its specific chemistry, nanocellulose can be easily functionalised and, thus, enriched with the properties required for an effective wood consolidant. Moreover, combining nanocellulose with other agents can also improve its properties, adding new functionalities to the developed supramolecular systems that would address multiple needs of degraded artefacts. Since the broad use of nanocellulose in conservation practice depends on its properties, price, and availability, the development of new, effective, green, and industrial-scale production methods ensuring the manufacture of nanocellulose particles with standardised properties is necessary. Nanocellulose is an interesting and very promising solution for the conservation of cultural heritage artefacts made of paper and wood; however, further thorough interdisciplinary research is still necessary to devise new green methods of its production as well as develop new effective and sustainable nanocellulose-based conservation agents, which would replace synthetic, non-sustainable consolidants and enable proper conservation of historical objects of our cultural heritage. [ABSTRACT FROM AUTHOR]

Phosphorylated cellulose can be an intrinsic flame retardant and a promising alternative for halogenated fire inhibitors. In this study, the mixture of di-ammonium hydrogen phosphate (DAP) and urea (U), containing phosphate and nitrogen groups, was applied to attain fire inhibitor properties. Functional groups of cellulose were grafted with phosphorous by keeping the constant molar ratio of 1/1.2/4.9 between anhydroglucose units of cellulose/DAP/U in different concentrations of bleached kraft pulp. Phosphorus concentrations were determined using the ICP hrOES method, and paper sheets were made using the Rapid Köthen apparatus. The tensile strength of phosphorylated cellulose increased twice compared with unmodified cellulose when the phosphorous concentration increased to 10,000 g/kg. An increase in the tensile index comes from the higher freeness of pulp and cross-linking of the phosphorous group between cellulose fibers. Remarkable fire retardancy effects were achieved in cellulose concentrations above 5 wt%. The raised phosphorous concentration above 10,000 g/kg due to the phosphorylation process caused the formation of a char layer on a cellulose surface and the nonflammable gas emission. That effect was indirectly confirmed by reducing the combustion temperature and HRR by 50 and 45%, respectively. Due to increasing phosphorus concentration in cellulose sheets, cellulose's fire and strength properties increased significantly. [ABSTRACT FROM AUTHOR]

The circular economy forces societies to take actions aimed at giving post-consumer products a "second life". As we know, wood is perfect for this. Moreover, reusing wood helps keep carbon in circulation, thus limiting its emissions into the atmosphere. It turns out that extensive research on determining the durability of wood is very useful and valuable for one more reason. Well, they can be used to create a model to determine the usefulness of wood, which has only apparently lost its utility value during many years of exposure to external factors. The research subject was samples of wood impregnated with protection agents and modified, originating from many years of field tests. The aim of the research was to correlate the results of wood durability determined after a period of exposure in open space with the results of determining the potential usefulness of such wood. On this basis, a model for determining the value of post-consumer wood was created. As a main result of post-consumer wood analysis, the high durabilities against C. puteana with mass loss below 3% were noticed for acetylated, furfurylated, and CCA-treated wood. Moreover, high color stabilities (ΔE < 10) were observed for thermowood and furfurylated wood. [ABSTRACT FROM AUTHOR]

Conservation of wooden objects exposed outdoors is extremely difficult and complex due to their constant exposure to fluctuating weather conditions and biological degradation. Filling the gaps in such objects requires the use of specific materials that in particular can adapt to changes in wood dimensions in response to humidity variations. Various materials have been used so far for filling voids in wooden artefacts but none of them was entirely suitable. Therefore, the authors have attempted to provide the basic characteristics of the selected commonly used filling materials based on pine wood powder or glass microballoons as fillers and Paraloid® B-72, Klucel® G, or glutin glue as binders, as the first step in research aiming at developing new and more appropriate gap-fillers. Special attention was paid to the dimensional stability of filling materials upon drying and exposure to water vapour and liquid water. The overall results indicate that among the examined fills those consisting of Paraloid® B-72 and glass microballoons revealed best properties as they were relatively dimensionally stable upon drying and exposure to moisture – despite high absorption of water – and were quite easy to finish. Generally, better properties were observed for filling materials containing higher concentrations of adhesives and these materials will be modified in the next step of the research. Since the main drawbacks of the examined gap-fillers were low water resistance, poor dimensional stability upon drying or exposure to water vapour or liquid water, and fragility or friability, future research into their modification will head towards improvement of the above-mentioned properties. [ABSTRACT FROM AUTHOR]

The objective of the paper was to determine the effect of an alkyd resin in a grafting process of [3-(2-aminoethylamino)propyl]trimethoxysilane (AAPTMS) to the wood matrix. In order to define the character of bonds between wood and the silane-resin formulation, nuclear magnetic resonance was applied. Fourier transform infrared spectroscopy analysis detected vibrations of Si–C, Si–O and N–H groups, indicating permanent bonding wood with the silane-resin formulation. Atomic absorption spectrometry and an elemental analyzer were used to evaluate the degree of leaching of silicon compounds from treated wood. The results of chemical analyses confirmed that the silane-resin formulation grafted to wood and that AAPTMS without an addition of the resin did not bond with wood and was leached from the treated material. The results of analyses described in the paper indicated that the alkyd resin significantly limited leaching of the organosilane from treated wood and improved its bonding with the wood matrix. [ABSTRACT FROM AUTHOR]