Search

Colorectal cancer is the most common tumor of the gastrointestinal system. The conventional treatment options of colorectal cancer are troublesome for both patients and clinicians. Recently, mesenchymal stem cells (MSCs) have been the novel focus for cell therapy due to its migration to tumor sites. In this study, the apoptotic effect of MSCs on colorectal cancer cell lines has been aimed. HCT-116 and HT-29 were selected as the colorectal cancer cell lines. Human umbilical cord blood and Wharton’s jelly were used as mesenchymal stem cell sources. To discriminate against the apoptotic effect of MSC on cancer, we also used peripheral blood mononuclear cells (PBMC) as a healthy control group. Cord blood-MSC and PBMC were obtained by ficoll-paque density gradient, and Wharton’s jelly-MSC by explant method. Transwell co-culture systems were used as cancer cells or PBMC/MSCs at ratios of 1/5 and 1/10, incubation times of 24 hours and 72 hours. The Annexin V/PI-FITC based apoptosis assay was performed by flow cytometry. Caspase-3 and HTRA2/Omi proteins were measured by ELISA. For both ratios in both cancer cells, it was found that the apoptotic effect of Wharton’s jelly-MSC was significantly higher in 72-hour incubations (p

Allogeneic stem cell transplantation (SCT) offers a potential cure for some hematological malignancies. For those patients without a family donor, unrelated donor (MUD) registries serve for identifying the best donor. In the present study, we aimed to give a cross-sectional report of our registry's activity and experience as the first established national MUD registry in the country. The study is retrospective and covers the period of 2016 to 2019. A total of 1855 donor searches were performed, and 642 were included in the study. All data were electronically obtained from the institutional database system. All SCTs were either 10/10 or 9/10 HLA matched and originated from an international registry. The most preferred stem cell source was peripheral blood (70.2%). A quarter of transplants were performed using bone marrow, and cord blood was used with a rate of 1.4%. The pandemic-related problems were similar for the other two national registries. During the pandemic, 71 of 432 patients who were searched for donors underwent stem cell transplant(SCT). The low number was related mostly with postponing of SCTs and/also difficulties in continuing of volunteering and in achievement of stem cells from international registry. During the Covid19 pandemic, the SCT activity of centers decreased according to the national, and international guidelines. The study revealed an organized, and multidirectional capacity of the registry and also the adaptation to unpredicted conditions such as pandemic. On the other hand, there is a need for more effective strategies for donor recruitment and retention programme.

Objective: HLA class I and II alleles are shown to be associated with certain diseases. A restricted numbers of alleles were found to be related to alloimmunisation in thalassemia population. The role of human leucocyte antigens in thalassemia is trend topic. In this study, the aim was to evaluate the differences in HLA frequencies of beta thalassemia patients comparing with healthy controls. Methodology: The data were collected of 100 patients who were diagnosed with beta thalassemia and 100 healthy controls were included in the study. The low resolution HLA-A, -B, -DRB1, tissue group data were performed Istanbul University, Faculty of Medicine, Medical Biology Department HLA typing laboratory. All data were analyzed retrospectively and their HLA allele frequencies were analyzed by SPSS (v22) program. Results: We found an increased frequency of HLA-B*14 (8% versus 2%) and HLA-B*52 (17% versus 2%) compared to the control group (p=0.05, OR=4.26; p

ULKUSEVEN, BAHRI/0000-0001-6342-1505; Ozdemir, Namik/0000-0003-3371-9874; Yaylim, Ilhan/0000-0003-2615-0202; SULEYMANOGLU, MEDIHA/0000-0002-1401-4863 WOS: 000527699700001 PubMed: 32314849 Iron(III) and nickel(II) complexes bearing a thiosemicarbazone framework were synthesized by a one-pot synthesis method. The structures were characterized by elemental analysis, IR, H-1 NMR, APCI Mass, conductivity, magnetic moment measurements. Molecular and crystal structures of the iron(III) complex were obtained from single-crystal X-ray diffraction. The findings showed that the metal atom adopts a slightly distorted square-pyramidal coordination, with the four donor atoms of the thiosemicarbazone ligand defining the basal plane and a chloride atom occupying the apical position. In the crystal lattice, the structure is stabilized by intermolecular O & x2500;H center dot center dot center dot O and C & x2500;H center dot center dot center dot O interactions. The cytotoxic activity was studied by MTT assay, the expression levels of cytochrome P450 (CYP) enzymes by Western blot, and the lipophilicity (LogP) by using the shake-flask method, another pharmacokinetic parameter. The findings showed that the IC50 values decreased with the decrease of the LogP values of the substances. Cytochrome P450 expression levels were found specific for each compound and each cell line. As a result, the pharmacokinetic properties of the newly synthesized thiosemicarbazone compounds are crucial for oral administration and provide us with clues for prospective in vivo studies. Scientific Research Projects Coordination Unit of Istanbul UniversityIstanbul University [49111]; Ondokuz Mays UniversityOndokuz Mayis University [PYO.FEN.1906.19.001, 109S188] This study was supported by the Scientific Research Projects Coordination Unit of Istanbul University (Project number: 49111); the Ondokuz Mays University (Project No: PYO.FEN.1906.19.001); and TuBTAK-SBAG (Project Number: 109S188).

In this study, one of the most promising methods of tailoring a composite scaffold material in nano sized diameters, electrospinning method were used to produce Polycaprolactone (PCL)/Graphene Oxide (GO)/Iron(II, III) Oxide (Fe3O4) nanocomposite fibers as biocompatible scaffolds for biomedical applications. Products were analyzed by scanning electron microscopy (SEM) for morphological analysis of the electrospun nanocomposites and Fourier Transform Infrared Spectroscopy (FTIR) was used to determine functional groups of the PCL, GO, and Fe3O4 materials in the electrospun nanocomposites. For physical properties, viscosity, density, permittivity, dielectric loss and liquid and solid state alternating current conductivity, measurements were done for each nanocomposite fibers. Effects of concentration percentage of GO on permittivity, dielectric loss and AC conductivity have been analyzed by using measured and calculated data. Trend lines have been drawn for permittivity, dielectric loss and conductivity via concentration percentage of GO. The relation between ac conductivity and frequency have been studied for each concentration percentage of GO and interpretations have been done by using the obtained results.

The biocompatibility of clinoptilolite/alumina/bovine hydroxyapatite (Cp - A12O3 - BHA) composite, at different ratio obtained by powder pressing process, were investigated studying the behavior of osteosarcoma (SAOS-2) cells. The biocompatibility was examined by means of cytotoxicity and cytocompatibility tests. The structure and morphology of bioceramic composites were studied by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) technique. The results showed that these materials have no toxic effects. The natural composite that fabricated in this study may be a promising approach for bone-engineering applications.

Eighteen of the iron(III) and nickel(II) complexes with tetradentate thiosemicarbazidato ligands were synthesized and described, by analytical and spectroscopic methods. Two complexes as an example to the iron and nickel centered ones were crystallographically analyzed to confirm the molecular structures. Cytotoxic effects of the complexes on K562 chronic myeloid leukemia cells were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. For comparison, human umbilical vein endothelial cells (HUVECs) was used as a noncancerous cell line. While four of the iron(III) complexes exhibited the antileukemic effect with 50% inhibition of cell growth (IC50) values in the 3.4 to 6.9 mu g/mL range on K562 cell line, the nickel(II) complexes showed no significant effect on both cell lines. The complexes Fe4, Fe5, and Fe6, bearing 4-methoxy substituent exhibited relatively high antiproliferative activity on both cell lines. Complex Fe3 with 3-methoxy and S-allyl groups exhibited a selectivity between K562 and HUVEC cells by IC50 values of 6.9 and >10 mu g/mL, respectively. Lipophilicity, a key parameter for bioavailability and oral administration, was found in the range of -0.3 and +1.3 that desired for drug active ingredients. The results were discussed in the context of a structure-activity relationship.

In this study, one of the most promising methods of tailoring a composite scaffold material in nano sized diameters, electrospinning method were used to produce Polycaprolactone (PCL)/Graphene Oxide (GO)/Iron(II, III) Oxide (Fe

In the development of tissue engineering scaffolds, the interactions between material surface and cells play crucial roles. The biomimetic 3-D scaffolds absolutely provide better results for fulfilling requirements such as porosity, interconnectivity, cell attachment and proliferation. In this study, 3-D electrospun scaffolds were prepared by using an electrospinning technique. Photo cross-linkable polyvinyl alcohol was used as a polymeric matrix. During the electrospinning, the nanofibers were cross-linked with in situ ultraviolet radiation. The crosslinked polymer fibers were achieved in a simple process at a single step. Nanofiber surface was modified with collagen by a chemical approach. The chemical structures were proven by attentuated total reflectance Fourier transform infrared spectroscopy and proton nuclear magnetic resonance. The surface morphology of the nanofibers was characterized by scanning electron microscope (SEM). Morphological investigations show that the resulting nanofibrous matrix has uniform morphology with a diameter of 220–250 nm. In vitro attachment and growth of 3T3 mouse fibroblasts and human umbilical vein endothelial cells (ECV304) cells on polyvinyl alcohol-based nanofiber mats were also investigated. Cell attachment, proliferation, and methylthiazole tetrazolium cytotoxicity assays indicated good cell viability throughout the culture time, which was also confirmed by SEM analysis. Copyright © 2015 John Wiley & Sons, Ltd.

In this study, we prepared photo-crosslinked modified HAP (hydroxy apatite)/polyvinyl alcohol (PVA) composite nanofiber scaffold for cell growth applications. HAP was synthesized and then modified with 4-vinylbenzene boronic acid (VBBA) to obtain 4-VBBA-HAP. By means of the simultaneous UV electrospinning technique 4-VBBA-HAP/PVA composite was obtained. The structure and morphology of electrospun membranes were investigated by scanning electron microscopy) and Fourier transform infrared spectroscopy technique. Nanofibers were treated with collagen solution via the spraying method. For the cell culture applications ECV304 and SAOS cells were seeded on the chosen electrospun fibrous scaffolds.

In this work, the usability of chitosan-co-hyaluronic acid cryogels as a tissue-engineering scaffold was investigated. Chitosan-co-hyaluronic acid cryogels were synthesized at subzero temperature. Cryogels which were composed of various compositions of chitosan and hyaluronic acid (0, 10, 20, 30 and 50wt% hyaluronic acid) was prepared. Morphological studies showed that the macroporous cryogels have been developed with 90-95% porosity. Particularly, the mechanical and biomaterial property of pure chitosan was improved by making copolymer with hyaluronic acid in different concentration. The MTT cell viability results demonstrated that the cryogels have no significant cytotoxicity effect on 3T3 fibroblast and SAOS-2 cells.

WOS: 000379683500001, PubMed ID: 27388324, Background: We evaluated the Bovine hydroxyapatite (BHA) structure. BHA powder was admixed with 5 and 10 wt% natural pumice (NP). Compression strength, Vickers micro hardness, Fourier transform infrared spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction studies were performed on the final NP-BHA composite products. The cells proliferation was investigated by MTT assay and SEM. Furthermore, the antimicrobial activity of NP-BHA samples was interrogated. Results: Variances in the sintering temperature (for 5 wt% NP composites) between 1000 and 1300 degrees C, reveal about 700 % increase in the microhardness (similar to 100 and 775 HV, respectively). Composites prepared at 1300 degrees C demonstrate the greatest compression strength with comparable result for 5 wt% NP content (87 MPa), which are significantly better than those for 10 wt% and those that do not include any NP (below 60 MPa, respectively). Conclusion: The results suggested the optimal parameters for the preparation of NP-BHA composites with increased mechanical properties and biocompatibility. Changes in micro-hardness and compression strength can be tailored by the tuning the NP concentration and sintering temperature. NP-BHA composites have demonstrated a remarkable potential for biomedical engineering applications such as bone graft and implant., Marmara University, Istanbul, Turkey [FEN-B-080415-0117, FEN-C-YLP-140115-0008]; NIMP Core Programme [PN4501-3], Financial support of Marmara University, Istanbul, Turkey, through research projects FEN-B-080415-0117 and FEN-C-YLP-140115-0008 is acknowledged. GES is thankful for the financial support of the NIMP PN4501-3 Core Programme.

In this study, zwitterionic phosphorylcholine grafted electrospun chitosan fiber was accomplished in three steps: (1) Azide groups on the chitosan were regioselectively replaced with hydroxyl side group and then the product was electrospun. (2) Chitosan based macroinitiator was prepared using an azide-alkyne click reaction from azide-functionalized electrospun chitosan fiber. (3) Poly(2-methacryloyloxyethyl phosphorylcholine) (MPC) was grafted onto the electrospun chitosan fiber by atom transfer radical polymerization (ATRP) in order to enhance cellular viability and proliferation of 3T3, ECV and Saos. The structure of surface modified chitosan was characterized by Fourier transform infrared spectrometer (FT-IR) and 1H nuclear magnetic resonance (1H NMR). The surface morphology of the nanofibers was investigated by scanning electron microscope (SEM). In-vitro cellular attachment and spreading experiments of 3T3, ECV304 and Saos were performed on electrospun chitosan fibers in the presence and the absence of MPC grafting. Poly(MPC) grafted electrospun fiber showed an excellent performance due to phosphorylcholine groups mimicking the natural phospholipid.