Search

Streszczenie Celem tego artykułu jest synteza boranu cynku przy użyciu węglanu cynku, kwasu borowego, referencyjnego boranu cynku (ZB) jako substancji aktywnej oraz badanie efektywności tego procesu modyfikowanego odczynnikami i parametrami reakcji na hydrofobowość i wydajność syntezy boranu cynku. Dotyczy to działania różnych czynników modyfikujących hydrofobowość i parametry reakcji: glikol propylenowy (PG) (0−6%, kerozyna 1−6%, kwas oleinowy (OA) 1−6% oraz rozpuszczalniki: alkohol izopropylowy (IPA), etanol i metanol. Po pierwsze, badano jak wpływają następujące parametry reakcji na uzysk boranu cynku: czas reakcji (1−5 h), wskaźnik reaktywacji (H3BO3 : ZnO), (2−5), udział zarodków krystalizacji (0−1,5%) w odniesieniu do kwasu borowego, temperatura reakcji (50−120°C), temperatura chłodzenia (10−80 °C), szybkość mieszania (400−700 obr./min). Ponadto, reakcje były przeprowadzone w określonych warunkach mieszania mechanicznego i magnetycznego. Wytwarzany boran cynku ze względu na hydrofobowość badano metodami: dyfrakcji rentgenowskiej XRD, spektroskopii FT-IR oraz pomiarami kąta zwilżania. Reasumując, stwierdzono, że boran cynku można otrzymać z powodzeniem z różnymi rozpuszczalnikami wpływającymi na jego hydrofobowość.

The aim of this study was to synthesize zinc borate using zinc oxide, reference boric acid, and reference zinc borate (reference ZB) as the seed, and to investigate the effects of modifying agents and reaction parameters on the hydrophobicity and yield, respectively. The reaction parameters include reaction time (1–5 h), reactant ratio (H3BO3/ZnO by mass: 2–5), seed ratio (seed crystal/(H3BO3+ZnO) by mass: 0–2wt%), reaction temperature (50–120°C), cooling temperature (10–80°C), and stirring rate (400–700 r/min); the modifying agents involve propylene glycol (PG, 0–6wt%), kerosene (1wt%–6wt%), and oleic acid (OA, 1wt%–6wt%) with solvents (isopropyl alcohol (IPA), ethanol, and methanol). The results of reaction yield obtained from either magnetically or mechanically stirred systems were compared. Zinc borate produced was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and contact angle tests to identify the hydrophobicity. In conclusion, zinc borate is synthesized successfully under the optimized reaction conditions, and the different modifying agents with various solvents affect the hydrophobicity of zinc borate.

In general, zinc oxide and boric acid are used to produce zinc borate. In this study, zinc carbonate was used instead of zinc oxide as the novel zinc source. The purpose of this study was to synthesize hydrophobic, nanostructured zinc borate (3ZnO·3B2O3·3.5H2O) by reaction of zinc carbonate, instead of zinc oxide, with boric acid reference material, and with zinc borate reference material as seed. The modifying agents propylene glycol, kerosene, and oleic acid were used to produce hydrophobic zinc borate. Different solvents (isopropyl alcohol, ethanol, and methanol) were used to obtain a homogeneous phase. The effects of different modifying agents and solvents on the hydrophobicity and nanostructure of the product were investigated. The synthesized zinc borate was characterized by X-ray diffraction and Fourier-transform infrared spectroscopy. Contact angles were measured to determine the hydrophobicity of the products and scanning electron microscopy was used to study both the morphology and nanostructure of the products. Hydrophobic, nanostructured zinc borate was successfully produced by use of zinc carbonate instead of zinc oxide as the novel zinc source. Use of different modifying agents and solvents affected both hydrophobicity and nanostructure.