Search

The field of 3-dimensional (3D) bioprinting has significantly expanded capabilities in producing precision-engineered hydrogel constructs, and recent years have seen the development of various stimuli-responsive bio- and photoinks. There is, however, a distinct lack of digital light processing (DLP)-compatible photoinks with thermoresponsivity. To remedy this, this work focuses on formulating and optimizing a versatile ink for DLP printing of thermoresponsive hydrogels, with numerous potential applications in tissue engineering, drug delivery, and adjacent biomedical fields. Photoink optimization was carried out using a multifactorial study design. The optimized photoink yielded crosslinked hydrogels with strong variations in hydrophobicity (contact angles of 44.4° LCST), indicating marked thermoresponsivity. Mechanical- and rheological characterization of the printed hydrogels showed significant changes above the LCST: storage- and loss moduli both increased and loss tangent and compressive modulus decreased above this temperature ( P ≤ 0.01). The highly cytocompatible hydrogel microwell arrays yielded both single- and multilayer spheroids with human dermal fibroblasts (HDFs) and HeLa cells successfully. Evaluation of the release of encapsulated model macro- (bovine serum albumin, BSA) and small molecule (rhodamine B) drugs in a buffer solution showed an interestingly inverted thermoresponsive release profile with >80% release at room temperature and about 50-60% release above the gels' LCST. All told, the optimized ink holds great promise for multiple biomedical applications including precise and high-resolution fabrication of complex tissue structures, development of smart drug delivery systems and 3D cell culture.

Chronic liver inflammation, a pervasive global health issue, results in millions of annual deaths due to its progression from fibrosis to the more severe forms of cirrhosis and hepatocellular carcinoma (HCC). This insidious condition stems from diverse factors such as obesity, genetic conditions, alcohol abuse, viral infections, autoimmune diseases, and toxic accumulation, manifesting as chronic liver diseases (CLDs) such as metabolic dysfunction-associated steatotic liver disease (MASLD), metabolic dysfunction-associated steatohepatitis (MASH), alcoholic liver disease (ALD), viral hepatitis, drug-induced liver injury, and autoimmune hepatitis. Late detection of CLDs necessitates effective treatments to inhibit and potentially reverse disease progression. However, current therapies exhibit limitations in consistency and safety. A potential breakthrough lies in nanoparticle-based drug delivery strategies, offering targeted delivery to specific liver cell types, such as hepatocytes, Kupffer cells, and hepatic stellate cells. This review explores molecular targets for CLD treatment, ongoing clinical trials, recent advances in nanoparticle-based drug delivery, and the future outlook of this research field. Early intervention is crucial for chronic liver disease. Having a comprehensive understanding of current treatments, molecular biomarkers and novel nanoparticle-based drug delivery strategies can have enormous impact in guiding future strategies for the prevention and treatment of CLDs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Nanoparticles (NPs) have shown significant potential for pulmonary administration of therapeutics for the treatment of chronic lung diseases in a localized and sustained manner. Nebulization is a suitable method of NP delivery, particularly in patients whose ability to breathe is impaired due to lung diseases. However, there are limited studies evaluating the physicochemical properties of NPs after they are passed through a nebulizer. High shear stress generated during nebulization could potentially affect the surface properties of NPs, resulting in the loss of encapsulated drugs and alteration in the release kinetics. Herein, we thoroughly examined the physicochemical properties as well as the therapeutic effectiveness of Infasurf lung surfactant (IFS)-coated PLGA NPs previously developed by us after passing through a commercial Aeroneb ® vibrating-mesh nebulizer. Nebulization did not alter the size, surface charge, IFS coating and bi-phasic release pattern exhibited by the NPs. However, there was a temporary reduction in the initial release of encapsulated therapeutics in the nebulized compared to non-nebulized NPs. This underscores the importance of evaluating the drug release kinetics of NPs using the inhalation method of choice to ensure suitability for the intended medical application. The cellular uptake studies demonstrated that both nebulized and non-nebulized NPs were less readily taken up by alveolar macrophages compared to lung cancer cells, confirming the IFS coating retention. Overall, nebulization did not significantly compromise the physicochemical properties as well as therapeutic efficacy of the prepared nanotherapeutics.

Lung cancer is often diagnosed at an advanced stage where tumors are usually inoperable and first-line therapies are inefficient and have off-targeted adverse effects, resulting in poor patient survival. Here, we report the development of an inhalable poly lactic-co-glycolic acid polymer-based nanoparticle (PLGA-NP) formulation with a biomimetic Infasurf® lung surfactant (LS) coating, for localized and sustained lung cancer drug delivery. The nanoparticles (188 ± 7 nm) were stable in phosphate buffered saline, serum and Gamble's solution (simulated lung fluid), and demonstrated cytocompatibility up to 1000 μg/mL concentration and dose-dependent uptake by lung cancer cells. The LS coating significantly decreased nanoparticle (NP) uptake by NR8383 alveolar macrophages in vitro compared to uncoated NPs. The coating, however, did not impair NP uptake by A549 lung adenocarcinoma cells. The anti-cancer drug gemcitabine hydrochloride encapsulated in the PLGA core was released in a sustained manner while the paclitaxel loaded in the LS shell demonstrated a rapid or burst release profile over 21 days. The drug-loaded NPs significantly decreased cancer cell survival and colony formation in vitro compared to free drugs and single drug-loaded NPs. In vivo studies confirmed greater retention of LS-coated NPs in the lungs of C57BL/6 WT mice compared to uncoated NPs, at 24 h and 72 h following intranasal administration. The overall results confirm that LS coating is a unique strategy for cloaking polymeric NPs to potentially prevent their rapid lung clearance and facilitate prolonged pulmonary drug delivery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The Rhode Island IDeA Network of Biomedical Research Excellence Molecular Informatics Core at the University of Rhode Island Information Technology Services Innovative Learning Technologies developed virtual and augmented reality applications to teach concepts in biomedical science, including pharmacology, medicinal chemistry, cell culture and nanotechnology. The apps were developed as full virtual reality/augmented reality and 3D gaming versions, which do not require virtual reality headsets. Development challenges included creating intuitive user interfaces, text-to-voice functionality, visualization of molecules and implementing complex science concepts. In-app quizzes are used to assess the user's understanding of topics, and user feedback was collected for several apps to improve the experience. The apps were positively reviewed by users and are being implemented into the curriculum at the University of Rhode Island.

Purpose: The development of two novel pH-only and pH- and thermo-responsive theranostic nanoparticle (NP) formulations to deliver an anticancer drug and track the accumulation and therapeutic efficacy of the formulations through inherent fluorescence., Methods: A pH-responsive formulation was synthesized from biodegradable photoluminescent polymer (BPLP) and sodium bicarbonate (SBC) via an emulsion technique, while a thermoresponsive BPLP copolymer (TFP) and SBC were used to synthesize a dual-stimuli responsive formulation via free radical co-polymerization. Cisplatin was employed as a model drug and encapsulated during synthesis. Size, surface charge, morphology, pH-dependent fluorescence, lower critical solution temperature (LCST; TFP NPs only), cytocompatibility and in vitro uptake, drug release kinetics and anticancer efficacy were assessed., Results: While all BPLP-SBC and TFP-SBC combinations produced spherical nanoparticles of a size between 200-300 nm, optimal polymer-SBC ratios were selected for further study. Of these, the optimal BPLP-SBC formulation was found to be cytocompatible against primary Type-1 alveolar epithelial cells (AT1) up to 100 μg/mL, and demonstrated sustained drug release over 14 days, dose-dependent uptake, and marked pH-dependent A549 cancer cell killing (72 vs. 24% cell viability, at pH 7.4 vs. 6.0). The optimal TFP-SBC formulation showed excellent cytocompatibility against AT1 cells up to 500 μg/mL, sustained release characteristics, dose-dependent uptake, pH-dependent (78% at pH 7.4 vs. 64% at pH 6.0 at 37°C) and marked temperature-dependent A549 cancer cell killing (64% at 37°C vs. 37% viability at pH 6.0, 41°C)., Conclusions: In all, both formulations hold promise as inherently fluorescent, stimuli-responsive theranostic platforms for passively targeted anti-cancer therapy., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Local skin cancer recurrence occurs in ∼12% of the patients post-surgery due to persistent growth of residual cancer cells. Wound infection is another significant complication following surgery. We report a novel in situ -forming nanocomposite hydrogel (NCH) containing PLGA-carboxymethyl chitosan nanoparticles (186 nm) for localized pH-responsive skin cancer therapy and wound healing. This injectable hydrogel, comprising of a citric acid-derived polymer backbone, gelled within 5 minutes, and demonstrated excellent swelling (283% of dry weight) and compressive strengths (∼5.34 MPa). Nanoparticle incorporation did not significantly affect hydrogel properties. The NCH effluents were cytocompatible with human dermal fibroblasts at 500 μg ml -1 concentration and demonstrated pH-dependent drug release and promising therapeutic efficacy against A431 and G361 skin cancer cells in vitro . Significant zones of inhibition were observed in S. aureus and E. coli cultures on NCH treatment, confirming its antibacterial properties. Our studies show that the pH-responsive NCH can be potentially used for adjuvant skin cancer treatment and wound healing.

Cartilage defects pose a significant clinical challenge as they can lead to joint pain, swelling and stiffness, which reduces mobility and function thereby significantly affecting the quality of life of patients. More than 250,000 cartilage repair surgeries are performed in the United States every year. The current gold standard is the treatment of focal cartilage defects and bone damage with nonflexible metal or plastic prosthetics. However, these prosthetics are often made from hard and stiff materials that limits mobility and flexibility, and results in leaching of metal particles into the body, degeneration of adjacent soft bone tissues and possible failure of the implant with time. As a result, the patients may require revision surgeries to replace the worn implants or adjacent vertebrae. More recently, autograft - and allograft-based repair strategies have been studied, however these too are limited by donor site morbidity and the limited availability of tissues for surgery. There has been increasing interest in the past two decades in the area of cartilage tissue engineering where methods like 3D bioprinting may be implemented to generate functional constructs using a combination of cells, growth factors (GF) and biocompatible materials. 3D bioprinting allows for the modulation of mechanical properties of the developed constructs to maintain the required flexibility following implantation while also providing the stiffness needed to support body weight. In this review, we will provide a comprehensive overview of current advances in 3D bioprinting for cartilage tissue engineering for knee menisci and intervertebral disc repair. We will also discuss promising medical-grade materials and techniques that can be used for printing, and the future outlook of this emerging field., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Perera, Ivone, Natekin, Wilga, Shen and Menon.)

Idiopathic pulmonary fibrosis (IPF) is a debilitating and fatal condition that causes severe scarring of the lungs. While the pathogenesis of IPF continues to be extensively studied and several factors have been considered, an exact cause has yet to be established. With inadequate treatment options and no cure available, overall disease prognosis is still poor. Existing oral therapies, pirfenidone and nintedanib, may attempt to improve the patients' quality of life by mitigating symptoms and slowing disease progression, however chronic doses and systemic deliveries of these drugs can lead to severe side effects. The lack of effective treatment options calls for further investigation of restorative as well as additional palliative therapies for IPF. Nanoparticle-based sustained drug delivery strategies can be utilized to ensure targeted delivery for site-specific treatment as well as long-acting therapy, improving overall patient compliance. This review provides an update on promising strategies for the delivery of anti-fibrotic agents, along with an overview of key therapeutic targets as well as relevant emerging therapies currently being evaluated for IPF treatment., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Complex three-dimensional (3D) cell cultures are being increasingly implemented in biomedical research as they provide important insights into complex cancer biology, and cell-cell and cell-matrix interactions in the tumor microenvironment. However, most methods used today for 3D cell culture are limited by high cost, the need for specialized skills, low throughput and the use of unnatural culture environments. We report the development of a unique biomimetic hydrogel microwell array platform for the generation and stress-free isolation of cancer spheroids. The poly N-isopropylacrylamide-based hydrogel microwell array (PHMA) has thermoresponsive properties allowing for the attachment and growth of cell aggregates/ spheroids at 37 °C, and their easy isolation at room temperature (RT). The reversible phase transition of the microwell arrays at 35 °C was confirmed visually and by differential scanning calorimetry. Swelling/ shrinking studies and EVOS imaging established that the microwell arrays are hydrophilic and swollen at temperatures <35 °C, while they shrink and are hydrophobic at temperatures >35 °C. Spheroid development within the PHMA was optimized for seeding density, incubation time and cell viability. Spheroids of A549, HeLa and MG-63 cancer cell lines, and human lung fibroblast (HLF) cell line generated within the PHMAs had relatively spherical morphology with hypoxic cores. Finally, using MG-63 cell spheroids as representative models, a proof-of-concept drug response study using doxorubicin hydrochloride was conducted. Overall, we demonstrate that the PHMAs are an innovative alternative to currently used 3D cell culture techniques, for the high-throughput generation of cell spheroids for disease modeling and drug screening applications., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Breast cancer is one of the leading causes of cancer-related morbidity and mortality in women worldwide. Early diagnosis and effective treatment of all types of cancers are crucial for a positive prognosis. Patients with small tumor sizes at the time of their diagnosis have a significantly higher survival rate and a significantly reduced probability of the cancer being fatal. Therefore, many novel technologies are being developed for early detection of primary tumors, as well as distant metastases and recurrent disease, for effective breast cancer management. Theranostics has emerged as a new paradigm for the simultaneous diagnosis, imaging, and treatment of cancers. It has the potential to provide timely and improved patient care via personalized therapy. In nanotheranostics, cell-specific targeting moieties, imaging agents, and therapeutic agents can be embedded within a single formulation for effective treatment. In this review, we will highlight the different diagnosis techniques and treatment strategies for breast cancer management and explore recent advances in breast cancer theranostics. Our main focus will be to summarize recent trends and technologies in breast cancer diagnosis and treatment as reported in recent research papers and patents and discuss future perspectives for effective breast cancer therapy.

Complex cell cultures are more representative of in vivo conditions than conventionally used monolayer cultures, and are hence being investigated for predictive screening of therapeutic agents. Poly lactide co-glycolide (PLGA) polymer is frequently used in the development of porous substrates for complex cell culture. Substrates or scaffolds with highly interconnected, micrometric pores have been shown to positively impact tissue model formation by enhancing cell attachment and infiltration. We report a novel alginate microsphere (AMS)-based controlled pore formation method for the development of porous, biodegradable PLGA microspheres (PPMS), for tissue engineered lung tumor model development. The AMS porogen, non-porous PLGA microspheres (PLGAMS) and PPMS had spherical morphology (mean diameters: 10.3 ± 4, 79 ± 21.8, and 103 ± 30 μm, respectively). The PPMS had relatively uniform pores and a porosity of 45.5%. Degradation studies show that PPMS effectively maintained their structural integrity with time whereas PLGAMS showed shrunken morphology. The optimized cell seeding density on PPMS was 25 × 10 3 cells/mg of particles/well. Collagen coating on PPMS significantly enhanced the attachment and proliferation of co-cultures of A549 lung adenocarcinoma and MRC-5 lung fibroblast cells. Preliminary proof-of-concept drug screening studies using mono- and combination anti-cancer therapies demonstrated that the tissue-engineered lung tumor model had a significantly higher resistance to the tested drugs than the monolayer co-cultures. These studies indicate that the PPMS with controllable pore diameters may be a suitable platform for the development of complex tumor cultures for early in vitro drug screening applications., (Copyright © 2020 Dhamecha, Le, Movsas, Gonsalves and Menon.)

Tissue imaging has emerged as an important aspect of theragnosis. It is essential not only to evaluate the degree of the disease and thus provide appropriate treatments, but also to monitor the delivery of administered drugs and the subsequent recovery of target tissues. Several techniques including magnetic resonance imaging (MRI), computational tomography (CT), acoustic tomography (AT), biofluorescence (BF) and chemiluminescence (CL), have been developed to reconstruct three-dimensional images of tissues. While imaging has been achieved with adequate spatial resolution for shallow depths, challenges still remain for imaging deep tissues. Energy loss is usually observed when using a magnetic field or traditional ultrasound (US), which leads to a need for more powerful energy input. This may subsequently result in tissue damage. CT requires exposure to radiation and a high dose of contrast agent to be administered for imaging. The BF technique, meanwhile, is affected by strong scattering of light and autofluorescence of tissues. The CL is a more selective and sensitive method as stable luminophores are produced from physiochemical reactions, e.g. with reactive oxygen species. Development of near infrared-emitting luminophores also bring potential for application of CL in deep tissues and whole animal studies. However, traditional CL imaging requires an enhancer to increase the intensity of low-level light emissions, while reducing the scattering of emitted light through turbid tissue environment. There has been interest in the use of focused ultrasound (FUS), which can allow acoustic waves to propagate within tissues and modulate chemiluminescence signals. While light scattering is decreased, the spatial resolution is increased with the assistance of US. In this review, chemiluminescence detection in deep tissues with assistance of FUS will be highlighted to discuss its potential in deep tissue imaging., (Copyright © 2020 Le, Dhamecha, Gonsalves and Menon.)

Theranostic systems capable of delivering imaging and therapeutic agents at a specific target are the focus of intense research efforts in drug delivery. To overcome non-degradability and toxicity concerns of conventional theranostic systems, we formulated a novel thermo-responsive fluorescent polymer (TFP) and conjugated it on the surface of iron oxide magnetic nanoparticles (MNPs) for imaging and therapeutic applications in solid tumors., Methods: TFP-MNPs were synthesized by copolymerizing poly( N -isopropylacrylamide), allylamine and a biodegradable photoluminescent polymer, and conjugating it on MNPs via a free radical polymerization reaction. Physicochemical properties of the nanoparticles were characterized using Fourier transform infrared spectroscopy, dynamic light scattering, and vibrational sample magnetometry. Nanoparticle cytocompatibility, cellular uptake and cytotoxicity were evaluated using in vitro cell assays. Finally, in viv o imaging and therapeutic efficacy studies were performed in subcutaneous tumor xenograft mouse models., Results: TFP-MNPs of ~135 nm diameter and -31 mV ζ potential maintained colloidal stability and superparamagnetic properties. The TFP shell was thermo-responsive, fluorescent, degradable, and released doxorubicin in response to temperature changes. In vitro cell studies showed that TFP-MNPs were compatible to human dermal fibroblasts and prostate epithelial cells. These nanoparticles were also taken up by prostate and skin cancer cells in a dose-dependent manner and exhibited enhanced killing of tumor cells at 41°C. Preliminary in vivo studies showed theranostic capabilities of the nanoparticles with bright fluorescence, MRI signal, and therapeutic efficacy under magnetic targeting after systemic administration in tumor bearing mice., Conclusion: These results indicate the potential of TFP-MNPs as multifunctional theranostic nanoparticles for various biological applications, including solid cancer management., Competing Interests: Competing Interests: The authors have declared that no competing interest exists., (© The author(s).)

Polymers are the backbone of pharmaceutical drug delivery. There are several polymers with varying properties available today for use in different pharmaceutical applications. Alginate is widely used in biomedical research due to its attractive features such as biocompatibility, biodegradability, inertness, low cost, and ease of production and formulation. Encapsulation of therapeutic agents in alginate/alginate complex microspheres protects them from environmental stresses, including the acidic environment in the gastro-intestinal tract (GIT) and enzymatic degradation, and allows targeted and sustained delivery of the agents. Microencapsulation is playing an increasingly important role in drug delivery as evidenced by the recent surge in research articles on the use of alginate in the delivery of small molecules, cells, bacteria, proteins, vaccines, and for tissue engineering applications. Formulation of these alginate microspheres (AMS) are commonly achieved by conventional external gelation method using various instrumental manipulation such as vortexing, homogenization, ultrasonication or spray drying, and each method affects the overall particle characteristics. In this review, an inclusive summary of the currently available methods for the formulation of AMS, its recent use in the encapsulation and delivery of therapeutics, and future outlook will be discussed., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Nanomedicines allow active targeting of cancer for diagnostic and therapeutic applications through incorporation of multiple functional components. Frequently, however, clinical translation is hindered by poor intratumoural delivery and distribution. The application of physical stimuli to promote tumour uptake is a viable route to overcome this limitation. In this study, ultrasound-mediated cavitation of microbubbles was investigated as a mean of enhancing the delivery of a liposome designed for chemo-radionuclide therapy targeted to EGFR overexpressing cancer. Method: Liposomes ( 111 In-EGF-LP-Dox) were prepared by encapsulation of doxorubicin (Dox) and surface functionalisation with Indium-111 tagged epidermal growth factor. Human breast cancer cell lines with high and low EGFR expression (MDA-MB-468 and MCF7 respectively) were used to study selectivity of liposomal uptake, subcellular localisation of drug payload, cytotoxicity and DNA damage. Liposome extravasation following ultrasound-induced cavitation of microbubbles (SonoVue®) was studied using a tissue-mimicking phantom. In vivo stability, pharmacokinetic profile and biodistribution were evaluated following intravenous administration of 111 In-labelled, EGF-functionalised liposomes to mice bearing subcutaneous MDA-MB-468 xenografts. Finally, the influence of ultrasound-mediated cavitation on the delivery of liposomes into tumours was studied. Results: Liposomes were loaded efficiently with Dox, surface decorated with 111 In-EGF and showed selective uptake in MDA-MB-468 cells compared to MCF7. Following binding to EGFR, Dox was released into the intracellular space and 111 In-EGF shuttled to the cell nucleus . DNA damage and cell kill were higher in MDA-MB-468 than MCF7 cells. Moreover, Dox and 111 In were shown to have an additive cytotoxic effect in MDA-MB-468 cells. US-mediated cavitation increased the extravasation of liposomes in an in vitro gel phantom model. In vivo , the application of ultrasound with microbubbles increased tumour uptake by 66% (p<0.05) despite poor vascularisation of MDA-MB-468 xenografts (as shown by DCE-MRI). Conclusion: 111 In-EGF-LP-Dox designed for concurrent chemo-radionuclide therapy showed specificity for and cytotoxicity towards EGFR-overexpressing cancer cells. Delivery to tumours was enhanced by the use of ultrasound-mediated cavitation indicating that this approach has the potential to deliver cytotoxic levels of therapeutic radionuclide to solid tumours., Competing Interests: Competing Interests: The authors have declared that no competing interest exists.

Scaffold-based cancer cell culture techniques have been gaining prominence especially in the last two decades. These techniques can potentially overcome some of the limitations of current three-dimensional cell culture methods, such as uneven cell distribution, inadequate nutrient diffusion, and uncontrollable size of cell aggregates. Porous scaffolds can provide a convenient support for cell attachment, proliferation and migration, and also allows diffusion of oxygen, nutrients and waste. In this paper, a comparative study was done on porous poly (lactic-co-glycolic acid) (PLGA) microparticles prepared using three porogens-gelatin, sodium bicarbonate (SBC) or novel poly N-isopropylacrylamide [PNIPAAm] particles, as substrates for lung cancer cell culture. These fibronectin-coated, stable particles (19-42 μm) supported A549 cell attachment at an optimal cell seeding density of 250,000 cells/ mg of particles. PLGA-SBC porous particles had comparatively larger, more interconnected pores, and favored greater cell proliferation up to 9 days than their counterparts. This indicates that pore diameters and interconnectivity have direct implications on scaffold-based cell culture compared to substrates with minimally interconnected pores (PLGA-gelatin) or pores of uniform sizes (PLGA-PMPs). Therefore, PLGA-SBC-based tumor models were chosen for preliminary drug screening studies. The greater drug resistance observed in the lung cancer cells grown on porous particles compared to conventional cell monolayers agrees with previous literature, and indicates that the PLGA-SBC porous microparticle substrates are promising for in vitro tumor or tissue development., Competing Interests: The commercial affiliation for WH with Progenitec Inc does not alter our adherence to PLOS ONE policies on sharing data and materials. There are no patents, or products in development or in the market to declare.

Radiolabelled, drug-loaded nanoparticles may combine the theranostic properties of radionuclides, the controlled release of chemotherapy and cancer cell targeting. Here, we report the preparation of poly(lactic-co-glycolic acid) (PLGA) nanoparticles surface conjugated to DTPA-hEGF (DTPA = diethylenetriaminepentaacetic acid, hEGF = human epidermal growth factor) and encapsulating the ruthenium-based DNA replication inhibitor and radiosensitizer Ru(phen)2(tpphz)2+ (phen = 1,10-phenanthroline, tpphz = tetrapyridophenazine) Ru1. The functionalized PLGA surface incorporates the metal ion chelator DTPA for radiolabelling and the targeting ligand for EGF receptor (EGFR). Nanoparticles radiolabelled with 111In are taken up preferentially by EGFR-overexpressing oesophageal cancer cells, where they exhibit radiotoxicity through the generation of cellular DNA damage. Moreover, nanoparticle co-delivery of Ru1 alongside 111In results in decreased cell survival compared to single-agent formulations; an effect that occurs through DNA damage enhancement and an additive relationship between 111In and Ru1. Substantially decreased uptake and radiotoxicity of nanoparticles towards normal human fibroblasts and oesophageal cancer cells with normal EGFR levels is observed. This work demonstrates nanoparticle co-delivery of a therapeutic radionuclide plus a ruthenium-based radiosensitizer can achieve combinational and targeted therapeutic effects in cancer cells that overexpress EGFR.

Late-stage diagnosis of lung cancer occurs ~95% of the time due to late manifestation of its symptoms, necessitating rigorous treatment following diagnosis. Existing treatment methods are limited by lack of specificity, systemic toxicity, temporary remission, and radio-resistance in lung cancer cells. In this research, we have developed a folate receptor-targeting multifunctional dual drug-loaded nanoparticle (MDNP) containing a poly(N-isopropylacrylamide)-carboxymethyl chitosan shell and poly lactic-co-glycolic acid (PLGA) core for enhancing localized chemo-radiotherapy to effectively treat lung cancers. The formulation provided controlled releases of the encapsulated therapeutic compounds, NU7441 - a potent radiosensitizer, and gemcitabine - an FDA approved chemotherapeutic drug for lung cancer chemo-radiotherapy. The MDNPs showed biphasic NU7441 release and pH-dependent release of gemcitabine. These nanoparticles also demonstrated good stability, excellent hemocompatibility, outstanding in vitro cytocompatibility with alveolar Type I cells, and dose-dependent caveolae-mediated in vitro uptake by lung cancer cells. In addition, they could be encapsulated with superparamagnetic iron oxide (SPIO) nanoparticles and visualized by MRI in vivo. Preliminary in vivo results demonstrated the low toxicity of these particles and their use in chemo-radiotherapy to effectively reduce lung tumors. These results indicate that MDNPs can potentially be used as nano-vehicles to provide simultaneous chemotherapy and radiation sensitization for lung cancer treatment.

Our goals were to develop and establish nanoparticle (NP)-facilitated inhalational gene delivery, and to validate its biomedical application by testing the hypothesis that targeted upregulation of pulmonary erythropoietin receptor (EpoR) expression protects against lung injury. Poly-lactic-co-glycolic acid (PLGA) NPs encapsulating various tracers were characterized and nebulizated into rat lungs. Widespread NP uptake and distribution within alveolar cells were visualized by magnetic resonance imaging, and fluorescent and electron microscopy. Inhalation of nebulized NPs bearing EpoR cDNA upregulated pulmonary EpoR expression and downstream signal transduction (ERK1/2 and STAT5 phosphorylation) in rats for up to 21 days, and attenuated hyperoxia-induced damage in lung tissue based on apoptosis, oxidative damage of DNA, protein and lipid, tissue edema, and alveolar morphology compared to vector-treated control animals. These results establish the feasibility and therapeutic efficacy of NP-facilitated cDNA delivery to the lung, and demonstrate that targeted pulmonary EpoR upregulation mitigates acute oxidative lung damage., From the Clinical Editor: Acute lung injury often results in significant morbidity and mortality, and current therapeutic modalities have proven to be ineffective. In this article, the authors developed nanocarrier based gene therapy in an attempt to upregulate the expression of pulmonary erythropoietin receptor in an animal model. Inhalation delivery resulted in reduction of lung damage., (Copyright © 2015 Elsevier Inc. All rights reserved.)

One of the many issues of using radiosensitizers in a clinical setting is timing daily radiation treatments to coincide with peak drug concentration in target tissue. To overcome this deficit, we have synthesized a novel nanoparticle (NP) system consisting of poly (lactic-co-glycolic acid) (PLGA) NPs conjugated with prostate cancer cell penetrating peptide-R11 and encapsulated with a potent radio-sensitizer 8-dibenzothiophen-4-yl-2-morpholin-4-yl-chromen-4-one (NU7441) to allow prostate cancer-specific targeting and sustained delivery over 3 weeks. Preliminary characterization studies showed that the R11-conjugated NPs (R11-NU7441 NPs) had an average size of about 274 ± 80 nm and were stable for up to 5 days in deionized water and serum. The NPs were cytocompatible with immortalized prostate cells (PZ-HPV-7). Further, the particles showed a bi-phasic release of encapsulated NU7441 and were taken up by PC3 prostate cancer cells in a dose- and magnetic field-dependent manner while not being taken up in nonprostate cancer cell lines. In addition, R11-NU7441 NPs were effective radiation sensitizers of prostate cancer cell lines in vitro. These results thus demonstrate the potential of R11-conjugated PLGA NPs as novel platforms for targeted radiosensitization of prostate cancer cells., (© 2014 Wiley Periodicals, Inc.)

Acellular biodegradable small diameter vascular grafts (SDVGs) require antithrombosis, intimal hyperplasia inhibition and rapid endothelialization to improve the graft patency. However, current antithrombosis and antiproliferation approaches often conflict with endothelial cell layer formation on SDVGs. To address this limitation, biodegradable elastic polyurethane urea (BPU) and the drug dipyridamole (DPA) were mixed and then electrospun into a biodegradable fibrous scaffold. The BPU would provide the appropriate mechanical support, while the DPA in the scaffold would offer biofunctions as required above. We found that the resulting scaffolds had tensile strengths and strains comparable with human coronary artery. The DPA in the scaffolds was continuously released up to 91 days in phosphate buffer solution at 37 °C, with a low burst release within the first 3 days. Compared to BPU alone, improved non-thrombogenicity of the DPA-loaded BPU scaffolds was evidenced with extended human blood clotting time, lower TAT complex concentration, lower hemolysis and reduced human platelet deposition. The scaffolds with a higher DPA content (5 and 10%) inhibited proliferation of human aortic smooth muscle cell significantly. Furthermore, the DPA-loaded scaffolds had no adverse effect on human aortic endothelial cell growth, yet it improved their proliferation. The attractive mechanical properties and biofunctions of the DPA-loaded BPU scaffold indicate its potential as an acellular biodegradable SDVG for vascular replacement., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Polymeric nanoparticles (NPs) are promising carriers of biological agents to the lung due to advantages including biocompatibility, ease of surface modification, localized action and reduced systemic toxicity. However, there have been no studies extensively characterizing and comparing the behavior of polymeric NPs for pulmonary protein/DNA delivery both in vitro and in vitro. We screened six polymeric NPs: gelatin, chitosan, alginate, poly(lactic-co-glycolic) acid (PLGA), PLGA-chitosan and PLGA-poly(ethylene glycol) (PEG), for inhalational protein/DNA delivery. All NPs except PLGA-PEG and alginate were <300nm in size with a bi-phasic core compound release profile. Gelatin, PLGA NPs and PLGA-PEG NPs remained stable in deionized water, serum, saline and simulated lung fluid (Gamble's solution) over 5days. PLGA-based NPs and natural polymer NPs exhibited the highest cytocompatibility and dose-dependent in vitro uptake, respectively, by human alveolar type-1 epithelial cells. Based on these profiles, gelatin and PLGA NPs were used to encapsulate plasmid DNA encoding yellow fluorescent protein (YFP) or rhodamine-conjugated erythropoietin (EPO) for inhalational delivery to rats. Following a single inhalation, widespread pulmonary EPO distribution persisted for up to 10days while increasing YFP expression was observed for at least 7days for both NPs. The overall results support both PLGA and gelatin NPs as promising carriers for pulmonary protein/DNA delivery., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

We reported the synthesis and characterization of dual-responsive poly(N-isopropylacrylamide-acrylamide-chitosan) (PAC)-coated magnetic nanoparticles (MNPs) for controlled and targeted drug delivery and imaging applications. The PAC-MNPs size was about 150nm with 70% iron mass content and excellent superparamagnetic properties. PAC-MNPs loaded with anti-cancer drug doxorubicin showed dual-responsive drug release characteristics with the maximum release of drugs at 40°C (∼78%) than at 37°C (∼33%) and at pH of 6 (∼55%) than at pH of 7.4 (∼28%) after 21 days. Further, the conjugation of prostate cancer-specific R11 peptides increased the uptake of PAC-MNPs by prostate cancer PC3 cells. The dose-dependent cellular uptake of the nanoparticles was also significantly increased with the presence of 1.3T magnetic field. The nanoparticles demonstrated cytocompatibility up to concentrations of 500μg/ml when incubated over a period of 24h with human dermal fibroblasts and normal prostate epithelial cells. Finally, pharmacokinetic studies indicated that doxorubicin-loaded PAC-MNPs caused significant prostate cancer cell death at 40°C than at 37°C, thereby confirming the temperature-dependent drug release kinetics and in vitro therapeutic efficacy. Future evaluation of in vivo therapeutic efficacy of targeted image-guided cancer therapy using R11-PAC-MNPs will reinforce a significant impact of the multifunctional PAC-MNPs on the future drug delivery systems., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Thermo-responsive poly(N-isopropylacrylamide-acrylamide-allylamine)-coated magnetic nanoparticles (PMNPs) were developed and conjugated with prostate cancer-specific R11 peptides for active targeting and imaging of prostate cancer. The stable nanoparticles with an average diameter of 100 nm and surface charge of -27.0 mV, had a lower critical solution temperature of 40 °C. Magnetic characterization showed that the nanoparticles can be recruited using a magnetic field and possess superparamagnetic behavior even after R11 conjugation. In vitro cell studies demonstrated that R11-conjugated PMNPs (R11-PMNPs) were compatible with human dermal fibroblasts and normal prostate epithelial cells to all tested concentrations up to 500 μg/ml after 24 h of incubation. Moreover, the nanoparticles were taken up by prostate cancer cells (PC3 and LNCaP) in a dose-dependent manner, which was higher in case of R11-PMNPs than PMNPs. Further, in vivo biodistribution of the nanoparticles showed significantly more R11-PMNPs accumulation in tumors than other vital organs unlike PMNPs without R11 conjugation. Moreover, R11-PMNPs decreased 30% magnetic resonance T2 signal intensity in tumors in vivo compared to 0% decrease with PMNPs. These results indicate great potential of R11-PMPs as platform technology to target and monitor prostate cancers for diagnostic and therapeutic applications., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Recently, magnetic-based theranostic nanoparticle (MBTN) systems have been studied, researched, and applied extensively to detect and treat various diseases including cancer. Theranostic nanoparticles are advantageous in that the diagnosis and treatment of a disease can be performed in a single setting using combinational strategies of targeting, imaging, and/or therapy. Of these theranostic strategies, magnetic-based systems containing magnetic nanoparticles (MNPs) have gained popularity because of their unique ability to be used in magnetic resonance imaging, magnetic targeting, hyperthermia, and controlled drug release. To increase their effectiveness, MNPs have been decorated with a wide variety of materials to improve their biocompatibility, carry therapeutic payloads, encapsulate/bind imaging agents, and provide functional groups for conjugation of biomolecules that provide receptor-mediated targeting of the disease. This review summarizes recent patents involving various polymer coatings, imaging agents, therapeutic agents, targeting mechanisms, and applications along with the major requirements and challenges faced in using MBTN for disease management.

Photo-based diagnosis and treatment methods are gaining prominence due to increased spatial imaging resolution, minimally invasive modalities involved as well as localized treatment. Recently, nanoparticles (NPs) have been developed and used in photo-based therapeutic applications. While some nanomaterials have inherent photo-based imaging capabilities, others including polymeric NPs act as nanocarriers to deliver various fluorescent dyes or photosensitizers for photoimaging and therapeutic applications. These applications can vary from Magnetic Resonance Imaging (MRI) and optical imaging to photothermal therapy (PTT) and chemotherapy. Materials commonly used for development of photo-based NPs ranges from metal-based (gold, silver and silica) to polymer-based (chitosan, dextran, poly ethylene glycol (PEG) and poly lactic-co-glycolic acid (PLGA)). Recent research has paved the way for multi-modal 'theranostic' (a combination of therapy and diagnosis) nano-carriers capable of active targeting using cell-specific ligands and carrying multiple therapeutic and imaging agents for accurate diagnosis and controlled drug delivery. This review summarizes the different materials used today to synthesize photo-based NPs, their diagnostic and therapeutic applications as well as the current challenges faced in bringing these novel nano-carriers into clinical practices.

The objective of this study was to investigate the physical characteristics of poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) coated with two surfactants, Pluronic or the commonly used polyvinyl alcohol (PVA); and determine their in vitro efficiency as drug carriers for cancer therapy. Free surfactant cytotoxicity results indicated that Pluronic F127 (PF127) was most cytocompatible among the Pluronics tested and hence chosen for coating PLGA NPs for further studies. Release studies using doxorubicin (DOX) as a drug model showed sustained release of DOX from both PVA- and PF127-coated PLGA NPs (PLGA-PVA and PLGA-PF127, respectively) over 28 days. Further, there was no significant difference in human dermal fibroblasts and human aortic smooth muscle cell survival when exposed to both types of NPs. Cellular uptake studies demonstrated that uptake of both nanoparticle types was dose-dependent for both prostate and breast cancer cells. However, these cancer cells internalized more PLGA-PF127 NPs than PLGA-PVA NPs. Moreover, studies showed that drug-loaded PLGA-PF127 NPs not only killed more cancer cells than drug-loaded PLGA-PVA NPs, but also overcame drug resistance in LNCaP, MDA-MB-231, and MDA-MB-468 cancer cells on re-exposure. These results indicate that PLGA-PF127 NPs can form a promising system that not only delivers anti-cancer drugs, but also overcomes drug resistance, which is prevalent in most cancer cells., (Copyright © 2011 Wiley Periodicals, Inc.)

An emerging need for evaluation of promising cellular therapies is a non-invasive method to image the movement and health of cells following transplantation. However, the use of a single modality to serve this purpose may not be advantageous as it may convey inaccurate or insufficient information. Multi-modal imaging strategies are becoming more popular for in vivo cellular and molecular imaging because of their improved sensitivity, higher resolution and structural/functional visualization. This study aims at formulating Nile Red doped hexamethyldisiloxane (HMDSO) nanoemulsions as dual modality (Magnetic Resonance Imaging/Fluorescence), dual-functional (oximetry/detection) nanoprobes for cellular and molecular imaging. HMDSO nanoprobes were prepared using a HS15-lecithin combination as surfactant and showed an average radius of 71±39 nm by dynamic light scattering and in vitro particle stability in human plasma over 24 hrs. They were found to readily localize in the cytosol of MCF7-GFP cells within 18 minutes of incubation. As proof of principle, these nanoprobes were successfully used for fluorescence imaging and for measuring pO(2) changes in cells by magnetic resonance imaging, in vitro, thus showing potential for in vivo applications.

Purpose: In proliferative vitreoretinopathy retinal pigment epithelial (RPE) cells undergo epithelial-mesenchymal transformation (EMT). Vitreous and transforming growth factor-beta (TGFbeta) have been implicated in this EMT. The role of TGFbeta in the vitreous-mediated transformation of low-passage human RPE cells was investigated., Methods: Cells were treated with vitreous or TGFbeta2. SB431542 was used to inhibit TGFbeta signaling. Morphology was investigated using phase-contrast or confocal microscopy. Motility was measured using a monolayer-wounding assay. Invasion was determined using basement membrane matrix-based assays. Gene expression was measured by quantitative PCR, immunohistochemistry, or immunoblotting., Results: Changes in phosphorylation or cellular localization of Smad -2, -3, or -4 indicated a TGFbeta-like activity in vitreous. Cortical actin filaments in untreated cells were replaced by stress fibers after TGFbeta treatment, but peripheral actin aggregates were seen in vitreous-treated cells. SB431542 did not block the morphologic change induced by vitreous. Vitreous-treated cells exhibited increased motility and invasion, whereas TGFbeta-treated cells did not. However, SB431542 decreased vitreous-meditated changes in motility and invasion. The levels of mRNA for genes indicative of myofibroblast differentiation (alpha-SMA and CTGF) were increased by treatment with TGFbeta but suppressed by vitreous. TGFbeta or vitreous caused increased expression of Snail1., Conclusions: Vitreous or TGFbeta caused a fibroblast-like morphology and induced Snail1, a marker of EMT. TGFbeta activity in vitreous was necessary but not sufficient for the vitreous-induced motile, invasive phenotype. However, differences in the cytoskeletal organization and in the expression of CTGF and alpha-SMA suggested that TGFbeta-treatment caused differentiation along a myofibroblast pathway, whereas vitreous treatment suppressed myofibroblast formation.

The environmental pollutant 4-tert-octylphenol (OP) is both toxic and estrogenic to mammalian cells, and injection of OP into adult male rats has devastating effects on their reproductive system. We now report the effects of OP in drinking water ( 1 x 10(-5), 1 x 10(-7) or 1 x 10 (-9) M) on the male reproductive system. Exposure of adult male rats for 4 months to any tested dose of OP had no significant effect on water or food consumption; body weight gain; hematocrit; reproductive organ weights; mean serum LH, FSH or testosterone concentrations; germ cell yield or relative numbers of different classes of testicular cells; or testicular sperm number. In contrast, all doses of OP caused an increase in epididymal sperm with tail abnormalities that would interfere with sperm motility, and the highest dose decreased epididymal sperm number. Our findings raise the possibility that consumption of OP in drinking water may adversely influence male reproductive fertility.

Prior exposure of cultured murine splenocytes to 17beta-estradiol (E) protects them from the membrane disrupting effects of the xenoestrogen 4-tert-octylphenol (OP). Using splenocytes isolated from male Balb/c mice, we tested whether (a) the xenoestrogen, 2', 3', 4', 5'-tetrachloro-4-biphenylol (PCB-OH), or the polychlorinated biphenyl, 3, 3', 4, 4'-tetrachlorobiphenyl (PCB 77), which displays both estrogenic and anti-estrogenic actions, would compromise the membrane integrity of the cells and (b) E or tamoxifen (TX), another ligand for the E receptor, would protect the membranes of cells exposed to the agents. We also examined possible interactions between OP, PCB-OH, and PCB 77 on the cells. Splenocytes were cultured for 24 hr. Concentrations of OP (10(-5)-10(-9) M), PCB-OH (10(-6)-10(-16) M), or PCB 77 (10(-8)-10(-12) M) significantly compromised the membrane integrity of the cultured splenocytes in a dose response manner. Concentrations of E as high as 10(-5) M or TX as high as 10(-7) M were without effect. Incubation of splenocytes in medium containing E or TX at 10(-7) M for 2 hr prior to the subsequent addition of either OP, PCB-OH or PCB 77 (final concentrations of 10(-7), 10(-7), or 10(-8) M, respectively) blocked the membrane disrupting effects. Incubation of splenocytes in medium containing 10(-7) M E starting 2 hr after the addition of OP or PCB 77 or incubation of splenocytes in medium containing 10(-7) M TX starting 2 hr after the addition of OP or PCB-OH did not block the damaging effects of OP, PCB 77, or PCB-OH on the cell membranes. No interactions were observed when various combinations of OP, PCB-OH, or PCB 77 were used. These data suggest that: (a) TX acts like E in this system, (b) a prior response of splenocytes to E or TX can protect them from the potential cytotoxic effects of OP, PCB-OH, or PCB 77; and, (c) OP, PCB-OH, and PCB 77 were not additive in their actions.

Four-tert-octylphenol (OP), an environmental pollutant, exerts apoptotic effects on cultured mouse splenocytes. Although OP binds to estrogen receptors, these apoptotic effects are not exerted by 17 beta-estradiol (E). It remained possible that OP might bind to estrogen receptors and subsequently exert apoptotic effects not exerted by E after it binds to the same receptors. It also remained possible that E-primed splenocytes might respond to OP differently than splenocytes not exposed to E. Thus, we investigated OP and E interactions on the viability of mouse splenocytes in culture. The total number of splenocytes (cells stained and not stained with trypan blue) was not altered or altered slightly after incubation with any agent for 24 h. Incubation of splenocytes in medium containing 5 x 10(-5) or 5 x 10(-7) M OP decreased the percentage of viable cells by only approx 47% and 25%, respectively. The addition of 0.8 x 10(-5) to 0.8 x 10(-9) M E to cultures was without effect or decreased the percentage of viable cells by only approx 5%. The addition of these concentrations of E simultaneously with or at 2 h after the addition of 5 x 10(-5) M or 5 x 10(-7) M OP to cultures did not interfere with the OP-induced decreases in cell viability. By contrast, incubation of splenocytes in medium containing E for 2 h prior to the subsequent addition of either dose of OP blocked the OP-induced decreases in cell viability in a dose-response manner. There was a marked reduction in the percentage of viable cells (70%) when splenocytes were incubated with 0.5 x 10(-5) M dexamethasone. The addition of 0.8 x 10(-5) M E at 2 h prior to the addition of dexamethasone did not prevent the decreased cell viability. Incubation of cells in medium with 0.8 x 10(-5) M testosterone caused a small decrease in splenocyte viability similar to that observed with E. However, unlike E, the addition of testosterone at 2 h prior to the addition of 5 x 10(-5) M OP did not prevent the OP-induced decrease in cell viability. These data suggest the presence of estrogen receptors in some splenocytes. They also suggest that if OP binds to these estrogen receptors or other receptors in the absence or initial presence of E, the resulting effect is toxic to the cells. By contrast, exposure of splenocytes to E prior to their exposure to OP can prevent the toxicity of OP.

Alkylphenol polyethoxylates and alkylphenols, such as 4-tertoctylphenol (OP), are environmental contaminants. Because these compounds are toxic to aquatic animals, we studied the effects of OP on splenocytes removed from male Fischer 344 rats or male Balb/c mice and cultured in vitro. Cell viability was assessed by trypan blue exclusion after 5 or 27 hr of culture. Culture with 0.08% ETOH (vehicle) or any dose of OP did not alter total cell number or the percentage of viable cells after 5 hr. Culture of cells with two different alkylphenol polyethoxylates for 5 hr resulted in the loss of all cells. The percentages of viable rat or mouse cells after 27 hr of culture were decreased significantly by 10(-12) M OP or greater concentrations. The actions of OP, dexamethasone (DEX), and 17 beta-estradiol on rat splenocytes were compared. Dexamethasone was more toxic than OP after 24 hr of culture; 17 beta-estradiol was not toxic. Dexamethasone and OP, but not 17 beta-estradiol, caused significant nuclear condensation after 3 hr of culture (acridine orange staining) or 4 hr of culture (propidium iodide staining). The toxicity of 10(-6) M OP, but not that of 10(-6) M DEX, was eliminated when mouse splenocytes were cultured in Ca2+ -free medium. Significantly more mouse splenocytes containing free 3'-OH DNA ends were detected by activated cell sorter analyses when the cells had been incubated for 4 hr with 10(-4) or 10(-6) M OP or 10(-6) M DEX. The results of these studies demonstrate that OP is toxic to cultured rat and mouse splenocytes and suggest that this toxic effect is exerted, at least partially, through Ca2+-dependent apoptosis.