Search

Analysis of amatoxins is of great importance as these cyclic peptides contribute to a high number of fatalities each year. Development of analytical approaches needs to focus on rapid, sensitive, and reliable methods. By establishing an affinity column chromatography-based assay using the monoclonal amanitin antibody AMA9G3 and liquid chromatography (LC) coupled to high-resolution mass spectrometry (HRMS) for the trace detection of α-, β-, and γ-amanitin in human urine samples to confirm ingestion, we report the first approach that extents the current status of amatoxin analysis. The presented procedure allows detection of amatoxins in human urine down to 1 ng/mL. The method was successfully validated qualitatively for α- and γ-amanitin according to international recommendations. A proof of concept was performed by analyzing 37 urine samples after suspected amatoxin consumption submitted for regular clinical toxicological analysis. Using this antibody-based enrichment strategy, acute amatoxin intoxications can be determined within 90 min and due to the high sensitivity and selectivity, a comparable approach using target specific antibodies may also be used for other toxicological relevant peptides. [ABSTRACT FROM AUTHOR]

Background: Pralsetinib, a targeted inhibitor of the RET enzyme, plays a critical role in the treatment of adult patients with locally advanced or metastatic non-small cell lung cancer (NSCLC) characterized by RET gene fusion mutations following platinum-based chemotherapy. Nevertheless, impurities resulting from the manufacturing and degradation of pralsetinib have the potential to impact its therapeutic effectiveness and safety profile. Methods: To address this issue, a liquid chromatography method was developed and validated for the specific identification of pralsetinib and its related impurities. The separation of pralsetinib and its related impurities was achieved via a Waters X Bridge Ci8 column with dimensions of 4.6 mm x 250 mm and a particle size of 5 ^m. Mobile phase A was composed of 20 mmol/L potassium dihydrogen phosphate (KH2PO4) and acetonitrile (ACN) at a volume ratio of 19:1, while mobile phase B consisted solely of ACN, utilizing a gradient elution technique. Detection was performed at a wavelength of 260 nm, with an injection volume of 10 ^L and a flow rate of 1.0 mL/min. Results: The chromatographic method established in this study was validated according to the ICH Q2 (R1) guidelines. The method demonstrated excellent linearity over a specific concentration range (imp-A: 0.035-10.21 ^ig/mL; imp-B: 0.09-10.16 ^g/mL; imp-C: 0.15-10.19 μg/mL; pralsetinib: 0.04-10.32 ^g/mL). Additionally, the method possesses high sensitivity, with detection limits for impurities A, B, C, and pralsetinib of 0.01, 0.03, 0.015, and 0.013 ^g/mL, respectively, and quantification limits of 0.035, 0.09, 0.05, and 0.04 ^ig/mL, respectively. In terms of specificity, stability, repeatability, accuracy, and robustness, the method met the validation acceptance criteria. Overall, the chromatographic technique established in this study can effectively separate pralsetinib and its impurities, providing reliable assurance for the accurate detection and quantification of impurities. Conclusion: The chromatographic method developed in this study can be utilized for the detection of pralsetinib and its impurities, offering a crucial reference for research on the quality of pralsetinib. [ABSTRACT FROM AUTHOR]

Chlorthalidone and efonidipine hydrochloride are anti-hypertensive agents with different mechanisms of action. These drugs are generally used as monotherapy; however, recent study suggests their use in combination reduces the mortality rate. Based on this evidence, Zuventus Healthcare limited developed a combination dosage (Efnocar Ct) which has been recently approved for its use. Hence, a new, sensitive, precise and robust method was developed and validated to determine the purity of the compounds in bulk as well as tablet dosage forms. The HPLC analysis was achieved on Zobrax 150 column using acetonitrile and ammonium formate (60:40% v/v) as the mobile phase and the detection was achieved at a λ max of 248nm. The linearity was achieved between the concentration range of 3µg/ml - 18µm/ml for chlorthalidone and 10µg/ml - 60µg/ml concentration range for efonidipine hydrochloride. The % recovery for chlorthalidone was 100.03% and that for efonidipine was 100.24%, indicating the method to be accurate. The LOD and LOQ values for chlorthalidone was 0.01µg/ml and 0.02µg/ml and for efonidipine it was 0.26µg/ml and 0.88µg/ml. This indicates the sensitivity of the method. Robustness studies have shown no significant variations and degradation studies have shown acceptable results. The results of the proposed method for linearity, accuracy, sensitivity and robustness were within the acceptable limits. [ABSTRACT FROM AUTHOR]

Effect concentrations of ammonia, nickel, sodium chloride, and potassium chloride from short‐term 7‐day tests were compared to those from standard chronic 28‐day toxicity tests with juvenile mussels (fatmucket, Lampsilis siliquoidea) to evaluate the sensitivities of the 7‐day tests. The effect concentrations for nickel (59 µg Ni/L), chloride (316–519 mg Cl/L, a range from multiple tests), and potassium (15 mg K/L) obtained from the 7‐day tests were within a range of effect concentrations for each corresponding chemical in the 28‐day tests (41–91 µg Ni/L, 251–>676 mg Cl/L, 15–23 mg K/L), whereas the 7‐day ammonia effect concentration (0.40 mg/L total ammonia nitrogen; TAN) was up to 3.3‐fold greater than the 28‐day effect concentrations (0.12–0.36 mg TAN/L) but with overlapped 95% confidence limits. These results indicate that the 7‐day tests produced similar estimates compared to the 28‐day tests. Further studies are needed to evaluate the 7‐day test sensitivity using additional chemicals with different modes of toxic action. Environ Toxicol Chem 2024;43:2020–2025. Published 2024. This article is a U.S. Government work and is in the public domain in the USA. [ABSTRACT FROM AUTHOR]

From organs to subcellular organelles, trace element (TE) homeostasis is fundamental for many physiological processes. While often overlooked in early stages, manifested TE disbalance can have severe health consequences, particularly in the context of aging or pathological conditions. Monitoring TE concentrations at the mitochondrial level could identify organelle-specific imbalances, contributing to targeted diagnostics and a healthier aging process. However, mitochondria isolation from frozen tissue is challenging, as it poses the risk of TE losses from the organelles due to cryodamage, but would significantly ease routine laboratory work. To address this, a novel method to isolate an enriched mitochondria fraction (EMF) from frozen tissue was adapted from already established protocols. Validation of manganese (Mn), iron (Fe), and copper (Cu) quantification via inductively coupled plasma tandem mass spectrometry (ICP-MS/MS) showed sufficiently low quantification limits for EMF TE analysis. Successful mitochondrial enrichment from frozen liver samples was confirmed via immunoblots and transmission electron microscopy (TEM) revealed sufficient structural integrity of the EMFs. No significant differences in EMF TEs between frozen and fresh tissue were evident for Mn and Cu and only slight decreases in EMF Fe. Consequently, EMF TEs were highly comparable for isolates from both tissue states. In application, this method effectively detected dietary differences in EMF Fe of a murine feeding study and identified the disease status in a Wilson disease rat model based on drastically increased EMF Cu. In summary, the present method is suitable for future applications, facilitating sample storage and high-throughput analyses of mitochondrial TEs. [ABSTRACT FROM AUTHOR]

Background and Aims: Delamanid is an active drug substance used in efficient treatment for multidrug-resistant tuberculosis (MDR TB). A straightforward, accurate, and precise HPTLC technique has been developed and validated for the study of the delamanid. Methods: The samples were placed as bands on an aluminium TLC plate covered with silica gel. Delamanid was completely separated using ethyl acetate and n-hexane as the mobile phase; the RF value was 0.51 0.098. At 330 nm, densitometric detection was performed in the absorbance mode. This method led to the discovery of sharp, symmetrical, and well-defined peaks. Results: A linear correlation was obtained for the concentration range of 200–1200 ng/spot, with a determination coefficient of 0.992. According to the requirements set out by the International Conference on Harmonisation, the method’s accuracy, recovery, repeatability, and robustness were all validated. The limit of quantitation was determined to be 349.11 ng/spot, whereas the lowest detectable level was found to be 115.2 ng/spot. This approach permitted the analysis of delamanid in the presence of their degradation products created under various stress conditions, according to the findings of the validation research. delamanid degraded by 20.54% and 35.72% under alkaline and photodegradation conditions, respectively. Conclusion: The established method might be used to evaluate the stability of delamanid in a commercial pharmaceutical dose form. Regarding HPTLC-induced degradation of delamanid, no prior technique has been documented. This technique was successfully used to quantify the amount of delamanid in its commercially available formulation. [ABSTRACT FROM AUTHOR]

Simultaneous determination of a tandem of drugs like perindopril and rosuvastatin with differences in water and organic solvent solubilities, hydrophobicity, polarities, and UV‐absorbing possibilities between them necessitates careful selection of chromatographic conditions. The four specified and different bonded reversed‐phase columns were tested with running mobile phases containing various composition contents concepts; the concept of using diluted trifluoroacetic acid in mobile phase composition with acetonitrile enabled simultaneous acidification and weak ion‐pairing with protonized molecules of analytes, yielding appropriate, short, reasonable run times and resolutions of analytes, satisfying UV‐transparency, and good peak symmetries. These facts especially stand for the peak of perindopril, as a member of the group of proline‐containing moiety in its structure, often and easily prone to peak‐tailing, skewing, or splitting on the high‐performance liquid chromatography chromatograms, which is usually solved by using alkyl‐sulfonate base and ion pairs on higher concentrations of buffering salts with low pH values and with column temperatures increasing by 50°C–60°C. Linearity range was 0.002/004–0.5 mg/mL. The score for method AGREE was 0.73–0.77. The method development approaches, with all columns employing our concepts in mobile phases and experimental conditions, can cover the complete needs and demands of quality control departments and laboratories as simple high‐throughput analysis methods. [ABSTRACT FROM AUTHOR]

Mexiletine (MEX) is an antiarrhythmic drug used to treat acute and chronic ventricular arrhythmias. A simple isocratic, rapid, specific, stability‐indicating, and sensitive reverse‐phase ultra‐high‐performance liquid chromatography (UHPLC) method was developed and successfully validated to quantify the assay and impurities of MEX hydrochloride. The new UHPLC method showed the optimum separation of MEX and its seven impurities in 20 min by using sodium acetate buffer (0.14 mM) with 0.3% of glacial acetic acid (pH 4.8) and methanol in the ratio of 40:60 (v/v) as mobile phase. The method used an Acquity HSS T3 (100 × 3.0 mm, 1.8 µm) chromatographic column at a 0.2 mL/min flow rate. The injection volume is 2 µL, and 254 nm is the detection wavelength. Note that, 25°C is the column oven temperature. The method is linear over the concentration range of the quantification limit (0.03%) to 150% (0.3%) of the specification level (0.2%) for the impurities and 50%–150% for the assay method. The quality control lab of bulk drugs and finished dosage form successfully applied the new UHPLC method for quantification of assay and impurities of MEX hydrochloride. [ABSTRACT FROM AUTHOR]

In order to improve and replace the enantiomer method outlined in the olodaterol hydrochloride draft monograph (From the European Pharmacopoeia forum), one new, simple, and fast enantioselective normal phase high‐performance liquid chromatography chiral method was developed on polysaccharide‐based Chiral MX (2) (4.6 × 250 mm, 5 μm) column. n‐Hexane, ethanol, and diethylamine in the ratio of 40:60:0.1 (V/V/V) were selected as mobile phase at a flow rate of 0.8 mL/min, and the detection was performed on a photodiode array detector at 225 nm with 5 μL injection volume. The column temperature was set at 40°C for better peak shape and sensitivity. The analysis time can be shortened to 15 min, whereas the resolution between enantiomer and olodaterol was found to be even more than 10.0, which was far better than that obtained with the reported method in this draft monograph. The developed chiral method was validated in accordance with ICH Q2 (R1), including specificity, LOD&LOQ, precision, linearity, accuracy, and robustness. Thereby, the proposed method was demonstrated to be suitable for the determination of enantiomer in olodaterol hydrochloride bulk drug and drug product. Besides, the thermodynamic parameters were evaluated on the basis of Van't Hoff plots that was used to explain correlative chiral recognition mechanisms with the chiral stationary phase. [ABSTRACT FROM AUTHOR]

Indacaterol, glycopyrronium, and mometasone furoate triple combination inhalable fixed-dose medicines are effectively used to treat asthma and various chronic pulmonary disorders. The study aimed to develop and validate a simple single-run RP-HPLC impurity quantitation method. The chromatographic separation was accomplished using gradient elution mode of mobile phase A (potassium dihydrogen phosphate buffer pH 2.2) and mobile phase B (mixture of acetonitrile and methanol), with a flow rate of 0.8 mL/min using YMC Triart, C18 (250 × 4.6 mm, 5 µm) HPLC column at 45 °C and the detection wavelength of 210 nm (for indacaterol, glycopyrronium and their impurities) and 248 nm (for mometasone furoate and its impurities). Water and methanol (20:80) were used as a diluent. Quantitation of 10 known and several unknown impurities was successfully performed with the determination of relative response factors for all the known impurities. The developed method was validated as per the ICH Q2(R1) guidelines. The stability indicating the nature of the method was proved by performing stress study on the sample and placebo. The linearity and range of the method were proved by calculating the r2 values (> 0.998). The overall precision was found to be within 1.82 − 7.76% RSD. The recovery for all the actives and known impurities were within 90 − 115% with 0.4 − 12% RSD. The sample solution was stable for 2 days at room temperature. The developed method can be successfully used for the impurity analysis of routine, stability, and commercial samples in a quality control laboratory of the pharmaceutical industry. [ABSTRACT FROM AUTHOR]

This work was aimed at creating a new, fast, and accurate UV spectrophotometric method for quantifying prazosin hydrochloride in pure and tablet dosage forms. A phosphate buffer solution of pH 6 was used as a diluent. The highest absorbance of prazosin hydrochloride was measured at 247 nm, and the linearity ranged from 2 to 8 μg/mL. The regression equation for prazosin hydrochloride was y= 0.087x + 0.236, with a correlation value 0.987. The percentage of recovery ranged from 99.6 to 101%. The relative standard deviation for intraday precision and interday precision was determined to be less than 2. The LOD and LOQ of prazosin hydrochloride were determined to be 0.0375 and 0.113 μg/mL, respectively. International Council for Harmonisation criteria validated the spectrometric technique and was suitable for routine quantitative measurement of prazosin hydrochloride in pure and tablet dosage forms. [ABSTRACT FROM AUTHOR]

Background: Ketamine is an NMDAR antagonist with aggregating use across many areas of medicine. P450 enzymes heavily metabolise ketamine, where norketamine is a first pass formed metabolite following initial N-demethylation. Serum ketamine monitoring is becoming increasingly important, requiring a sensitive method with a robust lower limit of quantitation. Methods: Samples were prepared using protein precipitation or solid phase extraction. Ion suppression was investigated to optimise sample preparation technique, followed by reverse-phase chromatography coupled with tandem mass spectrometry to analyse extractions using a Waters Xevo TQ-S Micro and associated Acquity chromatography systems. Performance characteristics were analysed to validate the assay. Results: Ketamine and norketamine retention times were 1.28 and 1.23 min, respectively. Ketamine and norketamine precursor ions fragmented into 2 distinguishable product ions (238.14 > 207.18/125.06 and 224.1 > 178.96/124.86). Performance characteristics include an assay recovery of 103.7% (ketamine) and 96.3% (norketamine), lower limit of quantitation 36.2 µg/L (ketamine) and 38.9 µg/L (norketamine), and intra-assay imprecision ≤ 7.04% on average. Conclusions: A robust and reproducible assay with limited sample preparation has been designed and validated. The linearity of the assay covers all ranges of interest reported in the literature. Ion suppression was clearly reduced via use of solid phase extraction. The method will form the basis of ketamine monitoring and providing valuable patient information on tolerance and metabolism. [ABSTRACT FROM AUTHOR]

Abstract Analysis of amatoxins is of great importance as these cyclic peptides contribute to a high number of fatalities each year. Development of analytical approaches needs to focus on rapid, sensitive, and reliable methods. By establishing an affinity column chromatography-based assay using the monoclonal amanitin antibody AMA9G3 and liquid chromatography (LC) coupled to high-resolution mass spectrometry (HRMS) for the trace detection of α-, β-, and γ-amanitin in human urine samples to confirm ingestion, we report the first approach that extents the current status of amatoxin analysis. The presented procedure allows detection of amatoxins in human urine down to 1 ng/mL. The method was successfully validated qualitatively for α- and γ-amanitin according to international recommendations. A proof of concept was performed by analyzing 37 urine samples after suspected amatoxin consumption submitted for regular clinical toxicological analysis. Using this antibody-based enrichment strategy, acute amatoxin intoxications can be determined within 90 min and due to the high sensitivity and selectivity, a comparable approach using target specific antibodies may also be used for other toxicological relevant peptides.

This study describes the dissolution release profiles of nicotine and flavor markers from three loose moist smoke-less tobacco (MST) products, same brand, each made with a distinct flavor. The US Pharmacopeia flow-through cell dissolution apparatus 4 (USP-4) was employed, following a previously published method that was validated to study the nicotine release from MST products. Herein, we expanded the scope of the analytical method by incorporating three flavor markers including methyl salicylate, ethyl salicylate, and glycyrrhizic acid to provide an understanding of the dissolution release profiles of not only nicotine but also of flavor markers. The dissolution release profiles of nicotine were found to be equivalent across all three tobacco products. In contrast, the release profiles of the studied flavor markers exhibited distinct differences, primarily influenced by their chemical properties, particularly polarity. Notably, glycyrrhizic acid demonstrated the most rapid release rate, while ethyl salicylate exhibited the slowest release rate. This study serves as a valuable resource for researchers, manufacturers, and regulatory bodies involved in the evaluation of MST products attributes and performance.

Liquid chromatography-mass spectrometry (LC-MS) is the key technique for analyzing complex lipids in biological samples. Various LC-MS modes are used for lipid separation, including different stationary phases, mobile-phase solvents, and modifiers. Quality control in lipidomics analysis is crucial to ensuring the generated datas reliability, reproducibility, and accuracy. While several quality control measures are commonly discussed, the impact of organic solvent quality during LC-MS analysis is often overlooked. Additionally, the annotation of complex lipids remains prone to biases, leading to potential misidentifications and incomplete characterization of lipid species. In this study, we investigate how LC-MS-grade isopropanol from different vendors may influence the quality of the mobile phase used in LC-MS-based untargeted lipidomic profiling of biological samples. Furthermore, we report the occurrence of an unusual, yet highly abundant, ethylamine adduct [M+46.0651]+ that may form for specific lipid subclasses during LC-MS analysis in positive electrospray ionization mode when acetonitrile is part of the mobile phase, potentially leading to lipid misidentification. These findings emphasize the importance of considering solvent quality in LC-MS analysis and highlight challenges in lipid annotation.

A sensitive spectrofluorimetric method was developed to determine trazodone hydrochloride in its formulation and urine sample. The principle of the developed method is based on the formation of an ion pair complex at a pH of 4.27 between the analyte drug and eosin Y, followed by its extraction into dichloromethane and subsequent fluorescence measurement. The fluorescence of the extracted trazodone-eosin Y complex was recorded at 450 nm with an excitation wavelength of 350 nm. Recording the fluorescence was utilized to construct the calibration plot, which was found to be linear in the range of 32.0–1.50 × 103 ng/mL of trazodone hydrochloride. The influences of experimental variables, namely pH, volumes of eosin Y (2.90 × 10–3 M), and buffer solution (pH 4.27), on the fluorescence intensity were examined and optimized by response surface methodology via Box−Behnken design. The limits of detection and the limit of quantitation of the reported method are 9.50 and 28.79 ng/mL, respectively. The accuracy of the proposed method was evaluated for intra-day and inter-day precision in the range of 0.46 to 0.77% RSD. The content of trazodone hydrochloride in its dosage forms was determined by the developed method using the standard addition technique, and the results showed good recovery between 96.50 and 99.25%, with a standard analytical error of 1.54 × 10–5 to 2.86 × 10–4. Interval hypothesis testing confirmed that it is lower than ±2%; hence, there was no bias between the developed and reference methods. No interference was observed from the common excipients present in tablet formulations. The developed method was also successfully applied for the determination of trazodone in urine samples, and recovery of the drug was observed in the range of 90–98%. [ABSTRACT FROM AUTHOR]

Summary: Herein, an ultra‐high performance liquid chromatography coupled to a diode array detector (UHPLC‐DAD) based quantification method has been developed for the simultaneous determination of 21 bioactive phenolic compounds present abundantly in food products. The developed method was validated in terms of parameters such as linearity, detection and quantification limits, intra‐day and inter‐day precision and recovery showing ideal results. Further, the developed method was applied for the quantitative analysis of phenolics in commercially procured dietary samples such as spices, green tea, black tea and dark chocolate. The major phenolics quantified in dry weight of different samples were epigallocatechin gallate (425.5 mg/10 g), epicatechin gallate (111.9 mg/10 g) in green tea; gallocatechin (286.8 mg/10 g) in dark chocolate; and naringin (93.9 mg/10 g) in star anise etc. Overall, the UHPLC‐DAD‐based method was found to be reliable, simple and specific for the estimation of phenolics in different targeted food samples. [ABSTRACT FROM AUTHOR]

Since the severe accident at Fukushima Daiichi Nuclear Power Plant, there has been an interest in the properties of oxide fuels in their near-melting temperature range. X-ray absorption fine structure (XAFS) is an effective method for understanding the fine structure and chemical bonding state of a sample; however, high-temperature XAFS measurements performed to date have been limited to 2000 K. We have developed a method for XAFS measurements of high-melting oxides above 2000 K. This method utilizes resistance heating of tungsten and confines the sample within a 0.06 mm slit to enable transmission-type XAFS measurements. We successfully performed an XAFS test with yttria-stabilized zirconia loaded at the tip of the slit and heated to 3000 K. [ABSTRACT FROM AUTHOR]

Mass spectrometry (MS) is a highly selective and sensitive analytical tool with a myriad of applications, but such techniques are typically used in laboratory settings due to the handling and preparations that are necessary. The merging of two streams of robust research, portable MS systems and next-generation ambient ionization methods, now provides the ability to perform high-performance chemical screening in an on-site and on-demand manner, with natural applications in disciplines such as forensic science, where samples of interest are typically found in field environments (i.e., traffic stops, crime scenes, etc.). Correspondingly, investigations regarding the suitability and robustness of these methodologies when they are utilized for authentic forensic evidence processing are prudent. This work reports critical insights into the role that choice of spray solvent system plays regarding analytical performance of two spray-based ambient ionization sources, paper spray ionization (PSI) and filter cone spray ionization (FCSI), when employed for evidence types containing emerging synthetic cannabinoids. The systematic characterization studies reported herein show that the applied spray solvent can dramatically affect both spectral intensity and signal duration, and in some circumstances, yield deleterious false negative responses. Overall, acetonitrile-based systems are shown to strike a balance between analyte solubility concerns and spray ionization dynamics of the novel ion sources employed on portable MS systems. [ABSTRACT FROM AUTHOR]

The retention behaviour of scopolamine (hyoscine) and its related compounds (norhyoscine, atropine, homatropine, and noratropine) was investigated on the silica-based HPLC stationary phase. The retention of investigated tropane alkaloids was interpreted by using the Soczewiński-Wachtmeister equation. A high correlation between the retention parameter (log k) and lipophilicity (log P) (R = 0.9923) confirms the significant influence of hydrophobic interactions on the retention behaviour of the aforementioned compounds. It was found that by increasing the acetonitrile fraction, a decrease in retention of the more polar epoxide derivatives (scopolamine, norhyoscine) and an increase in retention of the more lipophilic derivatives (atropine, noratropine, homatropine) is obtained. The best separation of the tropane alkaloids was achieved by a simple procedure that involved a mobile phase composed of acetonitrile and 40 mM ammonium acetate/0.05% TEA, pH 6.5; 50:50 v/v. Selected conditions were assumed for the determination of scopolamine hydrochloride in the eye drops (Scopolamini hydrobromidum 0.25%). The method was validated and it was found as selective, sensitive, precise, accurate, and robust for the further qualitative analysis of the scopolamine-related compounds. [ABSTRACT FROM AUTHOR]

Phosphine ligands are widely used in the manufacture of small molecule active pharmaceutical ingredients, for they play a key role in transition-metal-catalyzed cross-coupling. However, chromatographic analysis of phosphine ligands can be challenging because of the easily oxidizable nature of this class of compounds. This manuscript describes an out-of-specification (OOS) investigation study of XPhos raw material analysis by high performance liquid chromatography (LC). It is concluded that on-column degradation/oxidation is the culprit behind this OOS result. In addition, a slightly modified yet much improved new LC method is developed by adding a trace amount of tris(2-carboxyethyl)phosphine (TCEP) into the aqueous mobile phase. TCEP is also a phosphine compound and is commonly used as a reducing reagent in molecular biology. The trace amount of TCEP serves as a surrogate reagent to passivate the LC column and eliminate the on-column degradation/oxidation. As a result, a much more robust performance is achieved with greatly improved method precision and sensitivity. This is a general approach and can be applied to the LC analysis of many other phosphine ligands in the same manner. [ABSTRACT FROM AUTHOR]

The objective of this study was to develop a simultaneous analytical method for the determination of lignans, tocols, phytosterols, and squalene using high-performance liquid chromatography coupled with a diode array and fluorescence detector (HPLC-DAD-FLD). The method employed a VertisepTM UPS silica HPLC column (4.6 × 250 mm, 5 µm) with a mobile phase mixture of n-hexane/tetrahydrofuran/2-propanol. This approach enabled the simultaneous analysis of ten compounds within 22 min. The linear correlation (R2) exceeded 0.9901. The limit of detection (LOD) and limit of quantitation (LOQ) were up to 0.43 µg mL−1 for lignans and tocopherols and up to 326.23 µg mL−1 for phytosterol and squalene. The precision and accuracy of the intra-day and inter-day variation were less than 1.09 and 3.32% relative standard deviations (RSDs). Furthermore, the developed method was applied for the analysis of targeted compounds in twenty-eight sesame oil samples (1775–8965 µg g−1 total lignans, 29.7–687.9 µg g−1 total tocopherols, 2640–9500 µg g−1 phytosterol, and 245–4030 µg g−1 squalene). The HPLC method that has been developed was proven to be a reliable and effective tool for the determination of those functional compounds among sesame oil samples. [ABSTRACT FROM AUTHOR]

In the present investigation, an attempt was made for the development, validation, forced degradation and pharmacokinetic application of sitagliptin in the human plasma spiking studies by UV - HPLC method. The experimentation was developed based on the extensive literature survey and ascertained by the statistical parameters of the sampling. A simplified, accurate method was created by the liquid chromatographic system from Shimadazu LC 20AD consisting of manual injection. The optimized chromatogram was obtained with acetonitrile in the isocratic mobile phase method at a 1.0 mL/min flow rate. A thermo C-8 column (4.6X250mm,5μm) was used as a stationary phase, and 265.0nm was selected as the detection wavelength with the aid of a UV-Vis detector. The proposed method was validated as per ICH guidelines. The technique was linear in the range of 10-50μg/mL with correlation coefficient R2 = 0.9746, respectively. Recovery studies postulated that % RSD 19.14, 3 & 9.95 respectively. Injection repeatability values were found to be % RSD 17 & 10.63 for intraday and interday, respectively. Stress degradation studies revealed that sitagliptin degrades more rapidly when subjected to 0.1 NaoH. Human plasma spiking studies reported 3.02 ng/mL at 3.02+/-60 min of C and T max, respectively [ABSTRACT FROM AUTHOR]

Copyright of Journal fuer Verbraucherschutz und Lebensmittelsicherheit is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The high-value agarwood oil, largely used in perfumery is generally graded by the traditional method of sensorial assessment. The compositional complexity and variation made its quality control challenging. Besides, non-volatile contaminants and adulterants are the bottlenecks in gas-chromatographic detection. Herein, a HPTLC based technique was developed for the quality assessment of agarwood oil from Northeast India. A 'marker band' (anisylacetone and oxygenated sesquiterpene rich) on HPTLC profile, containing major peaks of the oil and characteristic agarwood aroma was quantified to assess the quality. The developed method was validated in terms of specificity, linearity, sensitivity, recovery and precision. The application of the method in test samples of three different grades indicated a positive correlation between 'marker band' quantity and oil quality. Its abundance in the superior grade oil was >50% and <20% in poor grade. It can be an efficient analytical tool for the quality assessment and grading of agarwood oil. [ABSTRACT FROM AUTHOR]

An efficient, fast, selective and simple isocratic elution method has been established using ultra performance liquid chromatography coupled to photodiode array detection and electrospray ionisation mass spectrometry (UPLC-PDA-ESI-MS) techniques for the quantification of isolated molecules from Hedychium spicatum rhizomes and assess their α-glucosidase inhibitory activity. Developed analytical method was validated as per the regulatory guidelines such as linearity, selectivity, the limits of detection (LOD) and quantification (LOQ), repeatability and accuracy. Highest concentration of 7-hydroxy hedychenone (4) (76.7 mg/g of dried plant material) was detected in rhizomes. Present results demonstrated parent extract (ethanolic) had the greatest inhibitory effect on α-glucosidase with IC50 values of 4.0 µg/mL. Developed method can be used as a new analytical approach for quality assessment of H. spicatum based herbal formulations and other products. Furthermore, current findings showed that the extract, fraction and isolated metabolites may be a good natural antidiabetic. [ABSTRACT FROM AUTHOR]

For the simultaneous determination of monoamine neurotransmitters (NTs) like dopamine, serotonin, noradrenaline, and epinephrine, and their metabolites (metanephrine, normetanephrine, 3-methoxytyramine, vanillylmandelic acid, 3,4-dihydroxyphenylacetic acid, homovanillic acid, and 5-hydroxyindoleacetic acid), a robust liquid chromatography method coupled with tandem mass spectrometry (LC–MS/MS) was introduced as the analytical method. This analytical method proved to be accurate for the simultaneous measurement of the amounts of 11 NTs and their metabolites in biological samples. The method proved to be more efficient and better than the previously reported method in terms of precision, recovery, sample requirement, and extraction procedure. The reported method requires only 100 μL of blood and 200 μL of urine, and the extraction procedure requires acetonitrile precipitation, filtration, drying, and reconstitution in water. The separation of all analytes was performed on an C18 column (4.6 mm × 150 mm and 1.8 μm). A 10 min gradient elution program with a mobile phase consisting of phase A (0.2% formic acid in water) and phase B (methanol) was used. The positive ionization mode was used for the detection of all analytes in multiple reaction monitoring (MRM). The proposed method was validated with an internal standard and yielded lower limits of detection and quantification ranges of 0.0182–0.0797 ng/mL and 0.0553–0.2415 ng/mL, respectively, with a good linearity (R2) between 0.9959 and 0.9994. The recoveries ranged from 73.37% to 116.63% in blood and from 80.9% to 115.33% in urine. For the NTs and metabolites, the intra- and interday % CV were 0.24–9.36 and 0.85–9.67, respectively. The developed LC–MS/MS method was successfully used for the determination of trace amounts of endogenous compounds in human blood and urine samples. [ABSTRACT FROM AUTHOR]

Molnupiravir, a promising antiviral agent, has gained significant attention for its potential in treating viral infections, particularly in the context of the coronavirus disease 2019 pandemic. This study aimed to develop and validate an ultra‐high‐performance liquid chromatography (UHPLC) method for the quantification of Molnupiravir and its associated impurities (Imp‐I, Imp‐II, Imp‐III, and Imp‐IV). The method involved a systematic investigation of critical method parameters and their optimization using Quality by Design principles. The percentage of organic modifiers, column temperature, and flow rate were systematically optimized using the Box‐Behnken design. The developed method was assessed for specificity, system suitability, accuracy, precision, linearity, and detection limits. The results demonstrate strong specificity, with the analysis remaining accurate even in the presence of impurities. The developed method exhibits excellent precision, with repeatability and intermediate precision showing relative standard deviation values ranging from 0.78% to 1.14% for impurities and 0.82% to 1.91% for Molnupiravir. Furthermore, the method displays exceptional linearity, covering a wide range of concentrations. The linear regression analysis yields high coefficients of determination (r2, 9993–0.9997), confirming the linearity. The developed UHPLC method is well‐suited for the accurate and reliable analysis of Molnupiravir and its impurities, making it a valuable tool for quality control and pharmaceutical research applications. [ABSTRACT FROM AUTHOR]

Background: Teneligliptin is a new drug recently approved by FDA for treatment of type 2 Diabetes Mellitus (DMT 2). Very few methods have been reported for analysing its degradation products and their impact on human health. Materials and Methods: A precise, specific, and sensitive gradient UHPLC technique was developed and validated to analyze Teneligliptin using an Agilent C18 column (4.6x100 mm ID) with 2.5 µm particle size. The method employs a flow rate 0.9 mL/min and detects the teneligliptin at a wavelength 241 nm. This method comprises a mobile phase consists a mixture of Methanol with 0.1% TEA (60:40%v/v), along with a 20 µL injection volume for duration of 20 min. Results: Linearity was found in the range of 2-10 µg/mL having a correlation coefficient of 0.999. The retention time for Teneligliptin was found to be 2.382. Furthermore, the precision and robustness of the method were validated with a remarkable RSD (Relative Standard Deviation) below 2%. Conclusion: The method's stability under various stress conditions was confirmed through forced degradation studies conducted on both bulk substances and pharmaceutical dosage forms. Validation of the method followed the guidelines outlined by the ICH for assessing the validation parameters like specificity, linearity, accuracy, precision, robustness, LOQ and LOD. [ABSTRACT FROM AUTHOR]

Objectives: To develop and validate a sensitive, accurate, simple, precise and cost-effective UHPLC method for the simultaneous determination of Teneligliptin and Pioglitazone in pure and its tablet formulation form and validating this developed method as per Guidelines of ICH (Figure 1). Materials and Methods: The chromatographic separation was done by using column Agilent C18 (2.5 µm; 4.6x100 mm ID), isocratic mobile phase consists of Methanol: 0.1% TEA (PH-6 WITH OPA) 60: 40%v/v. The flow rate of mobile phase is 0.9 mL/min. The separation was carried out at 241 nm wavelength. The current method for accuracy, precision, linearity, specificity, robustness and ruggedness was validated as per ICH guidelines. Results: Teneligliptin and Pioglitazone retention time observed at 2.382 and 3.315 min respectively. The graphs showing peak area against concentration demonstrated linear between 2-10 µg/mL for Teneligliptin and 1.5-7.5 µg/mL for Pioglitazone. This relationship exhibited a high level of linearity with a Regression coefficient (R2) of 0.999. The determined limit of detection is 0.0843 and 0.0084 µg/mL while the limit of quantification was found to be 0.255 and 0.025 µg/mL for Teneligliptin and Pioglitazone respectively. The assay percentage of the available formulation was found to be 99.72 and 100.51 for Teneligliptin and Pioglitazone. Conclusion: The Validation parameters indicate the effective separation of the drug substance from their degradants effectively. This developed method shows the suitability for the routine quantitative analysis of Teneligliptin and Pioglitazone in its pure and their available pharmaceutical formulations for quality control purpose. [ABSTRACT FROM AUTHOR]

In the present work, an efficient isocratic HPLC method was developed for the precise and accurate estimation of vitamin D3 in tablet form. The chromatographic conditions comprised an L3 silica column (5 µm in particle size, 4.6 mm × 250 mm) with a mobile phase n-hexane/ethyl acetate (85:15 v/v) with a flow rate of 2.0 mL/min and a detection wavelength of 292 nm. The new methodology was validated for accuracy, precision, specificity, robustness, and quantification limits according to an official monograph of USP/BP and ICH guidelines. The peak areas of the six replicates of the homogeneous sample were recorded. The mean value obtained was 67,301, and the relative standard deviation (RSD) was 0.1741. The linearity and range were in the acceptable bounds, i.e., 0.999, which was calculated using regression line analysis. The results show that the method is truly acceptable as the RSD, as the flow rate was 0.81%, while for the mobile phase composition, it was 0.72%, which lies in the acceptable range. The limit of detection (LOD) and the limit of quantification (LOQ) values were 0.0539 µg/mL and 0.1633 µg/mL, respectively. The % RSD of the intra and inter-day precision of the method was deemed acceptable according to the international commission for harmonization guidelines. The developed method has potential to be used for the detection and quantification of vitamin D3 during routine analysis for tablets in dosage form. [ABSTRACT FROM AUTHOR]

Background: The antiviral medication genre comprises the synthetic purine nucleoside analogue acyclovir, which particularly is used to treat varicella-zoster and herpes simplex virus infections. By incorporating into viral DNA to stop further synthesis, acyclovir limits DNA synthesis and viral multiplication. The investigation of an economical alternative was spurred by the existence of the currently used HPLC and UV techniques for acyclovir analysis, which are recognized for their solvent-intensive character. The innovation offers a more cost-effective method of pharmaceutical analysis along with improving sustainability. Materials and Methods: Using a CAMAG Linomat 5 sampler, the samples were spotted in the form of bands on a precoated silica gel plate using a CAMAG microliter syringe. The application rate was kept constant at 100 nL/sec and the spacing between the tracks was set. Chloroform, ethanol, isopropyl alcohol and strong ammonia (2:4:3:1 v/v/v/v) constitute the mobile phase. The development process was linear ascending in a twin trough glass chamber that was saturated with a mobile phase. To estimate acyclovir, densitometric scanning was carried out in the absorbance mode at 254 nm. Results: With r2=0.9974, the calibration plots' linear regression analysis results demonstrated a strong linear association. The limit of quantification was 11.7726 µg/mL, whereas the limit of detection was 3.884 µg/mL. Conclusion: According to statistical analysis of the data, the approach was found to be precise, accurate, repeatable, sensitive and selective for the analysis of acyclovir. The technique will work well for routine quality control when estimating acyclovir as a bulk medication. [ABSTRACT FROM AUTHOR]

The present work encompassed the assay quantification of diltiazem hydrochloride and its degradation impurity F by high-performance thin-layer chromatography (HPTLC). HPTLC was performed with chloroform‒methanol‒formic acid (7.5:1.5:0.2, V/V) as the mobile phase and aluminum-backed thin layer chromatography (TLC) plates precoated with a 200 μm layer of silica gel 60 F254 as the stationary phase. The densitometric chromatograms were performed at 254 nm, and the method was validated as recommended in the International Council for Harmonisation (ICH) guidelines. Statistical data from the analysis showed that the method is precise and highly sensitive. The correlation coefficient values of diltiazem hydrochloride and its impurity F were 0.9998 and 0.9975, respectively. The limit of detection was 76.81 ng/zone for diltiazem hydrochloride and 29.21 ng/zone for impurity F, while the limit of quantification was 232.77 ng/zone for diltiazem hydrochloride and 87.05 ng/zone for impurity F. The preciseness of the method was demonstrated and calculated as the % relative standard deviation for diltiazem hydrochloride and its impurity F. The mean recovery of the accuracy for diltiazem hydrochloride was between 98.23% and 100.29%, whereas for impurity F it was 100.02‒100.29%. The simplicity of the method proves its applicability for the quantification of impurity F during the synthesis of diltiazem hydrochloride. [ABSTRACT FROM AUTHOR]

Objective: This research article introduces new, rapid, accurate and precise HPLC method for estimating Ethinyl estradiol, Levonorgestrel and Ferrous fumarate from the bulk drug and tablets. Methods: HPLC analysis of all the three drugs was performed on the Sun Q sil C18, (250 mm x 4.6 mm ID, 5 µm) under isocratic conditions employing mobile phase as acetonitrile: water in ratio of 70: 30 at flow rate of 0.7 mL/min with UV wavelength of 265 nm. Results: Ferrous fumarate, Ethinyl estradiol, and Levonorgestrel had retention times of 2.86 min, 6.66 min and 9.87 min, respectively. The data from linear regression analysis studies was plotted and calibration plots demonstrated satisfactory linear connection. For Ethinyl estradiol, Levonorgestrel, and Ferrous fumarate, the mean correlation coefficient values were found to be 0.9997, 0.9992 and 0.9995. % RSD for intra-day precision and inter-day precision was found to be less than 2. Accuracy was found to be 99.58 % for Ethinyl estradiol, 99.85 % for Levonorgestrel and 100.06 % for Ferrous fumarate and the method was found to be specific. [ABSTRACT FROM AUTHOR]

A simple, Accurate, precise method was developed for the estimation of the Amantadine in bulk and pharmaceutical dosage form. Chromatogram was run through ACQUITY UPLC BEH C18 Column, 1.7 µm, 2.1 mm X 50 mm. Mobile phase containing 0.1% AmmoniumFormate: Methanol taken in the ratio 73.6 (%v/v) and 26.3 was pumped through column at a flow rate of 0.28 ml/min. Temperature was maintained at 29.21°C. Optimized wavelength selected was ACQUITY TUV ChA 219 nm. Retention time of Amantadine was found to be 1.814 min. %RSD of the Amantadine was found to be 0.4%. %Recovery was obtained as 99.94% for Amantadine. LOD, LOQ values obtained from regression equations of Amantadine were 0.05, 0.15. Regression equation of Amantadine is y = 52995x + 2524.1. with regression coefficient value is found to be 0.99. Retention times were decreased and that run time was decreased, so the method developed was simple and economical that can be adopted in regular Quality control test in Industries. [ABSTRACT FROM AUTHOR]

This study presents the validation of a reverse phase high performance liquid chromatographic technique (RP-HPLC) for the simultaneous measurement of hydrochlorothiazide and telmisartan in tablet and bulk dose forms. An ODS Inertsil C18 (150 × 4.6 mm, 5μ particle size) column was used for chromatography in isocratic mode. The mobile phase included 0.1% trifluoroacetic acid: acetonitrile (70:30) ratio. The eluent was measured at 225 nm and the flow rate was 1.2 ml/min. It was discovered that the chosen chromatographic conditions successfully separated hydrochlorothiazide (RT-2.70) and telmisartan (RT-9.98 min). It was discovered that the suggested approach was reliable, accurate, economical and resilient. It can be applied to the simultaneous study of these medications in tablet form. [ABSTRACT FROM AUTHOR]

Determining a drug's bioavailability and bioequivalence is important for developing and approving a drug product. The procedure supports applications for generic drug products and novel therapeutic substances, makes important decisions regarding safety and efficacy, and measures a drug's concentration in biological matrices. This study aimed to develop and validate a specific, simple, sensitive, and accurate method using liquid chromatography–tandem mass spectrometry (LC–MS) for measuring bumetanide (BUM) in human plasma. Chromatographic separation was achieved using a Hypurity C18 column (4.6 × 50 mm, 5 μm) under isocratic conditions, and LC–MS detected positive ionization acquisition modes. Protonated precursor to product ion transitions were observed at m/z 365.08 → 240.10 and 370.04 → 244.52 for BUM and internal standard, respectively. The linear range of BUM in plasma samples was 3.490–401.192 ng/mL. The inter‐precision value ranged from 1.76% to 4.75%. The inter‐accuracy value ranged from 96.46% to 99.95%. The method was adequately validated per the U.S. Food and Drug Administration guidelines, and the results were within permissible bounds. The Cmax and Tmax values were ~53.097 ± 13.537 ng/mL and 1.25 (0.67–5.00) h, respectively. The new approach showed satisfactory results for studying BUM in human plasma with potential use in pharmacokinetic and bioequivalence investigations. [ABSTRACT FROM AUTHOR]

Samarium diiodide (SmI2) is a single electron reductant and versatile synthetic tool that can be used to create carbon- carbon bonds or other synthetic transformations. SmI2 is typically used with an Argon atmosphere glovebox and anhydrous solvents from a solvent purification system; however, not all labs have access to these equipment. A more accessible air-free option is Schlenk line glassware. Here in reports an optimized method for the synthesis and use of SmI2 on a Schlenk line. During optimization of the system, it was found that the largest impact on the success of SmI2 was the THF solvent. Anhydrous solvent was achieved though distillation, but after storage of the solvent over two weeks enough moisture/air was accumulated to significantly impact the concentration of the SmI2 formed in solution. The use of molecular sieves further indicates that the impact of water accumulation in the solvent compared to oxygen has the most significant factor on the success of synthesizing SmI2. These observations of THF storage overtime are important to account for when carrying out SmI2 reactions and other air-sensitive reactions on the Schlenk line.