Search

Competing Interests: The authors declare no competing interests.

Gas and propane stoves emit nitrogen dioxide (NO 2 ) pollution indoors, but the exposures of different U.S. demographic groups are unknown. We estimate NO 2 exposure and health consequences using emissions and concentration measurements from >100 homes, a room-specific indoor air quality model, epidemiological risk parameters, and statistical sampling of housing characteristics and occupant behavior. Gas and propane stoves increase long-term NO 2 exposure 4.0 parts per billion volume on average across the United States, 75% of the World Health Organization's exposure guideline. This increased exposure likely causes ~50,000 cases of current pediatric asthma from long-term NO 2 exposure alone. Short-term NO 2 exposure from typical gas stove use frequently exceeds both World Health Organization and U.S. Environmental Protection Agency benchmarks. People living in residences <800 ft 2 in size incur four times more long-term NO 2 exposure than people in residences >3000 ft 2 in size; American Indian/Alaska Native and Black and Hispanic/Latino households incur 60 and 20% more NO 2 exposure, respectively, than the national average.

Purpose of Review: Organosulfur compounds are intentionally added to natural gas as malodorants with the intent of short-term nasal inhalation to aid in leak detection. Regulatory exposure limits have not been established for all commonly used natural gas odorants, and recent community-level exposure events and growing evidence of indoor natural gas leakage have raised concerns associated with natural gas odorant exposures. We conducted a scoping review of peer-reviewed scientific publications on human exposures and animal toxicological studies of natural gas odorants to assess toxicological profiles, exposure potential, health effects and regulatory guidelines associated with commonly used natural gas odorants., Recent Findings: We identified only 22 studies which met inclusion criteria for full review. Overall, there is limited evidence of both transient nonspecific health symptoms and clinically diagnosed causative neurotoxic effects associated with prolonged odorant exposures. Across seven community-level exposure events and two occupational case reports, consistent symptom patterns included: headache, ocular irritation, nose and throat irritation, respiratory complaints such as shortness of breath and asthma attacks, and skin irritation and rash. Of these, respiratory inflammation and asthma exacerbations are the most debilitating, whereas the high prevalence of ocular and dermatologic symptoms suggest a non-inhalation route of exposure. The limited evidence available raises the possibility that organosulfur odorants may pose health risks at exposures much lower than presently understood, though additional dose-response studies are needed to disentangle specific toxicologic effects from nonspecific responses to noxious organosulfur odors. Numerous recommendations are provided including more transparent and prescriptive natural gas odorant use practices., (© 2023. The Author(s).)

Exposure pathways to the carcinogen benzene are well-established from tobacco smoke, oil and gas development, refining, gasoline pumping, and gasoline and diesel combustion. Combustion has also been linked to the formation of nitrogen dioxide, carbon monoxide, and formaldehyde indoors from gas stoves. To our knowledge, however, no research has quantified the formation of benzene indoors from gas combustion by stoves. Across 87 homes in California and Colorado, natural gas and propane combustion emitted detectable and repeatable levels of benzene that in some homes raised indoor benzene concentrations above well-established health benchmarks. Mean benzene emissions from gas and propane burners on high and ovens set to 350 °F ranged from 2.8 to 6.5 μg min -1 , 10 to 25 times higher than emissions from electric coil and radiant alternatives; neither induction stoves nor the food being cooked emitted detectable benzene. Benzene produced by gas and propane stoves also migrated throughout homes, in some cases elevating bedroom benzene concentrations above chronic health benchmarks for hours after the stove was turned off. Combustion of gas and propane from stoves may be a substantial benzene exposure pathway and can reduce indoor air quality.

The U.S. Environmental Protection Agency estimates that there are over 3.2 million abandoned wells in the United States. Studies conducted on gas emissions from abandoned wells have been limited to methane, a powerful greenhouse gas, due to concerns regarding climate change. However, volatile organic compounds (VOCs), including benzene, a known human carcinogen, are known to be associated with upstream oil and gas development and hence could also be released when methane is emitted to the atmosphere. In this investigation, we analyze gas from 48 abandoned wells in western Pennsylvania for fixed gases, light hydrocarbons, and VOCs and estimate associated emission rates. We demonstrate that (1) gas from abandoned wells contains VOCs, including benzene; (2) VOCs are emitted from abandoned wells, the magnitude of which depends on the flow rate and concentration of VOCs in the gas stream; and (3) nearly one-quarter of abandoned wells are located within 100 m of buildings, including residences, in Pennsylvania. Together, these observations indicate that further investigation is necessary to determine whether emissions from abandoned wells pose an inhalation risk to people living, working, or congregating near abandoned wells., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

People living near oil and gas development are exposed to multiple environmental stressors that pose health risks. Some studies suggest these risks are higher for racially and socioeconomically marginalized people, which may be partly attributable to disparities in exposures. We examined whether racially and socioeconomically marginalized people in California are disproportionately exposed to oil and gas wells and associated hazards. We longitudinally assessed exposure to wells during three time periods (2005-2009, 2010-2014, and 2015-2019) using sociodemographic data at the census block group-level. For each block group and time period, we assessed exposure to new, active, retired, and plugged wells, and cumulative production volume. We calculated risk ratios to determine whether marginalized people disproportionately resided near wells (within 1 km). Averaged across the three time periods, we estimated that 1.1 million Californians (3.0%) lived within 1 km of active wells. Nearly 9 million Californians (22.9%) lived within 1 km of plugged wells. The proportion of Black residents near active wells was 42%-49% higher than the proportion of Black residents across California, and the proportion of Hispanic residents near active wells was 4%-13% higher than their statewide proportion. Disparities were greatest in areas with the highest oil and gas production, where the proportion of Black residents was 105%-139% higher than statewide. Socioeconomically marginalized residents also had disproportionately high exposure to wells. Though oil and gas production has declined in California, marginalized communities persistently had disproportionately high exposure to wells, potentially contributing to health disparities., Competing Interests: The authors declare no conflicts of interest relevant to this study., (© 2023 The Authors. GeoHealth published by Wiley Periodicals LLC on behalf of American Geophysical Union.)

The presence of hazardous air pollutants (HAPs) entrained in end-use natural gas (NG) is an understudied source of human health risks. We performed trace gas analyses on 185 unburned NG samples collected from 159 unique residential NG stoves across seven geographic regions in California. Our analyses commonly detected 12 HAPs with significant variability across region and gas utility. Mean regional benzene, toluene, ethylbenzene, and total xylenes (BTEX) concentrations in end-use NG ranged from 1.6-25 ppmv─benzene alone was detected in 99% of samples, and mean concentrations ranged from 0.7-12 ppmv (max: 66 ppmv). By applying previously reported NG and methane emission rates throughout California's transmission, storage, and distribution systems, we estimated statewide benzene emissions of 4,200 (95% CI: 1,800-9,700) kg yr -1 that are currently not included in any statewide inventories─equal to the annual benzene emissions from nearly 60,000 light-duty gasoline vehicles. Additionally, we found that NG leakage from stoves and ovens while not in use can result in indoor benzene concentrations that can exceed the California Office of Environmental Health Hazard Assessment 8-h Reference Exposure Level of 0.94 ppbv─benzene concentrations comparable to environmental tobacco smoke. This study supports the need to further improve our understanding of leaked downstream NG as a source of health risk.

Hurricanes have caused major healthcare system disruptions. No systematic assessment of hurricane risk to United States hospital-based healthcare delivery has been performed. Here, we show that 25 of 78 metropolitan statistical areas (MSAs) on the United States Atlantic and Gulf Coasts have half or more of their hospitals at risk of flooding from relatively weak hurricanes. 0.82 m of sea level rise expected within this century from climate change increases the odds of hospital flooding 22%. Furthermore, in 18 MSAs at least half of the roads within 1.6 km of hospitals were at risk of flooding from a category 2 storm. These findings identify previously undescribed risks to hospital-based care delivery in Atlantic and Gulf Coast communities. They suggest that lower intensity hurricanes can have outsized impacts on healthcare access, particularly in places where per capita bed availability is low., Competing Interests: The authors declare no conflicts of interest relevant to this study., (© 2022 The Authors. GeoHealth published by Wiley Periodicals LLC on behalf of American Geophysical Union.)

The presence of volatile organic compounds (VOCs) in unprocessed natural gas (NG) is well documented; however, the degree to which VOCs are present in NG at the point of end use is largely uncharacterized. We collected 234 whole NG samples across 69 unique residential locations across the Greater Boston metropolitan area, Massachusetts. NG samples were measured for methane (CH 4 ), ethane (C 2 H 6 ), and nonmethane VOC (NMVOC) content (including tentatively identified compounds) using commercially available USEPA analytical methods. Results revealed 296 unique NMVOC constituents in end use NG, of which 21 (or approximately 7%) were designated as hazardous air pollutants. Benzene (bootstrapped mean = 164 ppbv; SD = 16; 95% CI: 134-196) was detected in 95% of samples along with hexane (98% detection), toluene (94%), heptane (94%), and cyclohexane (89%), contributing to a mean total concentration of NMVOCs in distribution-grade NG of 6.0 ppmv (95% CI: 5.5-6.6). While total VOCs exhibited significant spatial variability, over twice as much temporal variability was observed, with a wintertime NG benzene concentration nearly eight-fold greater than summertime. By using previous NG leakage data, we estimated that 120-356 kg/yr of annual NG benzene emissions throughout Greater Boston are not currently accounted for in emissions inventories, along with an unaccounted-for indoor portion. NG-odorant content ( tert -butyl mercaptan and isopropyl mercaptan) was used to estimate that a mean NG-CH 4 concentration of 21.3 ppmv (95% CI: 16.7-25.9) could persist undetected in ambient air given known odor detection thresholds. This implies that indoor NG leakage may be an underappreciated source of both CH 4 and associated VOCs.

Fine particulate matter (PM 2.5 ) air pollution varies spatially and temporally in concentration and composition and has been shown to cause or exacerbate adverse effects on human and ecological health. Biomonitoring using airborne tree leaf deposition as a proxy for particulate matter (PM) pollution has been explored using a variety of study designs, tree species, sampling strategies, and analytical methods. In the USA, relatively few have applied these methods using co-located fine particulate measurements for comparison and relying on one tree species with extensive spatial coverage, to capture spatial variation in ambient air pollution across an urban area. Here, we evaluate the utility of this approach, using a spatial saturation design and pairing tree leaf samples with filter-based PM 2.5 across Pittsburgh, Pennsylvania, with the goal of distinguishing mobile and stationary sources using PM 2.5 composition. Co-located filter and leaf-based measurements revealed some significant associations with traffic and roadway proximity indicators. We compared filter and leaf samples with differing protection from the elements (e.g., meteorology) and PM collection time, which may account for some variance in PM source and/or particle size capture between samples. To our knowledge, this study is among the first to use deciduous tree leaves from a single tree species as biomonitors for urban PM 2.5 pollution in the northeastern USA.

Land use regression (LUR) modeling has become a common method for predicting pollutant concentrations and assigning exposure estimates in epidemiological studies. However, few LUR models have been developed for metal constituents of fine particulate matter (PM 2.5 ) or have incorporated source-specific dispersion covariates in locations with major point sources. We developed hybrid AERMOD LUR models for PM 2.5 , black carbon (BC), and steel-related PM 2.5 constituents lead, manganese, iron, and zinc, using fine-scale air pollution data from 37 sites across the Pittsburgh area. These models were designed with the aim of developing exposure estimates for time periods of interest in epidemiology studies. We found that the hybrid LUR models explained greater variability in PM 2.5 (R 2  = 0.79) compared to BC (R 2  = 0.59) and metal constituents (R 2  = 0.34-0.55). Approximately 70% of variation in PM 2.5 was attributable to temporal variance, compared to 36% for BC, and 17-26% for metals. An AERMOD dispersion covariate developed using PM 2.5 industrial emissions data for 207 sources was significant in PM 2.5 and BC models; all metals models contained a steel mill-specific PM 2.5 emissions AERMOD term. Other significant covariates included industrial land use, commercial and industrial land use, percent impervious surface, and summed railroad length., (Copyright © 2019 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Spatially accurate population data are critical for determining health impacts from many known risk factors. However, the utility of the increasing spatial resolution of disease mapping and environmental exposures is limited by the lack of receptor population data at similar sub-census block spatial scales., Methods: Here we apply an innovative method (Population Allocation by Occupied Domicile Estimation - ABODE) to disaggregate U.S. Census populations by allocating an average person per household to geospatially-identified residential housing units (RHU). We considered two possible sources of RHU location data: address point locations and building footprint centroids. We compared the performance of ABODE with the common proportional population allocation (PPA) method for estimating the nighttime residential populations within 200 m radii and setback areas (100 - 300 ft) around active underground natural gas storage (UGS) wells (n = 9834) in six U.S. states., Results: Address location data generally outperformed building footprint data in predicting total counts of census residential housing units, with correlations ranging from 0.67 to 0.81 at the census block level. Using residentially-sited addresses only, ABODE estimated upwards of 20,000 physical households with between 48,126 and 53,250 people living within 200 m of active UGS wells - likely encompassing the size of a proposed UGS Wellhead Safety Zone. Across the 9834 active wells assessed, ABODE estimated between 5074 and 10,198 more people living in these areas compare to PPA, and the difference was significant at the individual well level (p = < 0.0001). By either population estimation method, OH exhibits a substantial degree of hyperlocal land use conflict between populations and UGS wells - more so than other states assessed. In some rare cases, population estimates differed by more than 100 people for the small 200 m 2 well-areas. ABODE's explicit accounting of physical households confirmed over 50% of PPA predictions as false positives indicated by non-zero predictions in areas absent physical RHUs., Conclusions: Compared to PPA - in allocating identical population data at sub-census block spatial scales -ABODE provides a more precise population at risk (PAR) estimate with higher confidence estimates of populations at greatest risk. 65% of UGS wells occupy residential urban and suburban areas indicating the unique land use conflicts presented by UGS systems that likely continue to experience population encroachment. Overall, ABODE confirms tens of thousands of homes and residents are likely located within the proposed UGS Wellhead Safety Zone - and in some cases within state's oil and gas well surface setback distances - of active UGS wells.

Air pollution exposure characterization has been shaped by many constraints. These include technologies that lead to insufficient coverage across space and/or time in order to characterize individual or community-level exposures with sufficient accuracy and precision. However, there is now capacity for continuous monitoring of many air pollutants using comparatively inexpensive, real-time sensors. Crucial questions remain regarding whether or not these sensors perform adequately for various potential end uses and whether performance varies over time or across ambient conditions. Performance scrutiny of sensors via lab- and field-testing and calibration across their lifetime is necessary for interpretation of data, and has important implications for end users including cost effectiveness and ease of use. We developed a comparatively lower-cost, portable, in-home air sampling platform and a guiding development and maintenance workflow that achieved our goal of characterizing some key indoor pollutants with high sensitivity and reasonable accuracy. Here we describe the process of selecting, validating, calibrating, and maintaining our platform - the Environmental Multi-pollutant Monitoring Assembly (EMMA) - over the course of our study to-date. We highlight necessary resources and consider implications for communities or researchers interested in developing such platforms, focusing on PM 2.5 , NO, and NO 2 sensors. Our findings emphasize that lower-cost sensors should be deployed with caution, given financial and resource costs that greatly exceed sensor costs, but that selected community objectives could be supported at lesser cost and community-based participatory research strategies could be used for more wide-ranging goals., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Health effects of fine particulate matter (PM 2.5 ) may vary by composition, and the characterization of constituents may help to identify key PM 2.5 sources, such as diesel, distributed across an urban area. The composition of diesel particulate matter (DPM) is complicated, and elemental and organic carbon are often used as surrogates. Examining multiple elemental and organic constituents across urban sites, however, may better capture variation in diesel-related impacts, and help to more clearly separate diesel from other sources. We designed a "super-saturation" monitoring campaign of 36 sites to capture spatial variance in PM 2.5 and elemental and organic constituents across the downtown Pittsburgh core (~2.8 km²). Elemental composition was assessed via inductively-coupled plasma mass spectrometry (ICP-MS), organic and elemental carbon via thermal-optical reflectance, and organic compounds via thermal desorption gas-chromatography mass-spectrometry (TD-GCMS). Factor analysis was performed including all constituents-both stratified by, and merged across, seasons. Spatial patterning in the resultant factors was examined using land use regression (LUR) modelling to corroborate factor interpretations. We identified diesel-related factors in both seasons; for winter, we identified a five-factor solution, describing a bus and truck-related factor [black carbon (BC), fluoranthene, nitrogen dioxide (NO₂), pyrene, total carbon] and a fuel oil combustion factor (nickel, vanadium). For summer, we identified a nine-factor solution, which included a bus-related factor (benzo[ghi]fluoranthene, chromium, chrysene, fluoranthene, manganese, pyrene, total carbon, total elemental carbon, zinc) and a truck-related factor (benz[a]anthracene, BC, hopanes, NO₂, total PAHs, total steranes). Geographic information system (GIS)-based emissions source covariates identified via LUR modelling roughly corroborated factor interpretations.

Despite advances in monitoring and modelling of intra-urban variation in multiple pollutants, few studies have attempted to separate spatial patterns by time of day, or incorporated organic tracers into spatial monitoring studies. Due to varying emissions sources from diesel and gasoline vehicular traffic, as well as within-day temporal variation in source mix and intensity (e.g., rush-hours vs. full-day measures), accurately assessing diesel-related air pollution within an urban core can be challenging. We allocated 24 sampling sites across downtown Pittsburgh, Pennsylvania (2.8 km²) to capture fine-scale variation in diesel-related pollutants, and to compare these patterns by sampling interval (i.e., "rush-hours" vs. "work-week" concentrations), and by season. Using geographic information system (GIS)-based methods, we allocated sampling sites to capture spatial variation in key traffic-related pollution sources (i.e., truck, bus, overall traffic densities). Programmable monitors were used to collect integrated work-week and rush-hour samples of fine particulate matter (PM 2.5 ), black carbon (BC), trace elements, and diesel-related organics (polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes), in summer and winter 2014. Land use regression (LUR) models were created for PM 2.5 , BC, total elemental carbon (EC), total organic carbon (OC), elemental (Al, Ca, Fe), and organic constituents (total PAHs, total hopanes), and compared by sampling interval and season. We hypothesized higher pollution concentrations and greater spatial contrast in rush-hour, compared to full work-week samples, with variation by season and pollutant. Rush-hour sampling produced slightly higher total PM 2.5 and BC concentrations in both seasons, compared to work-week sampling, but no evident difference in spatial patterns. We also found substantial spatial variability in most trace elements and organic compounds, with comparable spatial patterns using both sampling paradigms. Overall, we found higher concentrations of traffic-related trace elements and organic compounds in rush-hour samples, and higher concentrations of coal-related elements (e.g., As, Se) in work-week samples. Mean bus density was the strongest LUR predictor in most models, in both seasons, under each sampling paradigm. Within each season and constituent, the bus-related terms explained similar proportions of variance in the rush-hour and work-week samples. Rush-hour and work-week LUR models explained similar proportions of spatial variation in pollutants, suggesting that the majority of emissions may be produced during rush-hour traffic across downtown. Results suggest that rush-hour emissions may predominantly shape overall spatial variance in diesel-related pollutants.

Capturing intra-urban variation in diesel-related pollution exposures remains a challenge, given its complex chemical mix, and relatively few well-characterized ambient-air tracers for the multiple diesel sources in densely-populated urban areas. To capture fine-scale spatial resolution (50×50m grid cells) in diesel-related pollution, we used geographic information systems (GIS) to systematically allocate 36 sampling sites across downtown Pittsburgh, PA, USA (2.8km 2 ), cross-stratifying to disentangle source impacts (i.e., truck density, bus route frequency, total traffic density). For buses, outbound and inbound trips per week were summed by route and a kernel density was calculated across sites. Programmable monitors collected fine particulate matter (PM 2.5 ) samples specific to workweek hours (Monday-Friday, 7 am-7 pm), summer and winter 2013. Integrated filters were analyzed for black carbon (BC), elemental carbon (EC), organic carbon (OC), elemental constituents, and diesel-related organic compounds [i.e., polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes]. To our knowledge, no studies have collected this suite of pollutants with such high sampling density, with the ability to capture spatial patterns during specific hours of interest. We hypothesized that we would find substantial spatial variation for each pollutant and significant associations with key sources (e.g. diesel and gasoline vehicles), with higher concentrations near the center of this small downtown core. Using a forward stepwise approach, we developed seasonal land use regression (LUR) models for PM 2.5 , BC, total EC, OC, PAHs, hopanes, steranes, aluminum (Al), calcium (Ca), and iron (Fe). Within this small domain, greater concentration differences were observed in most pollutants across sites, on average, than between seasons. Higher PM 2.5 and BC concentrations were found in the downtown core compared to the boundaries. PAHs, hopanes, and steranes displayed different spatial patterning across the study area by constituent. Most LUR models suggested a strong influence of bus-related emissions on pollution gradients. Buses were more dominant predictors compared to truck and vehicular traffic for several pollutants. Overall, we found substantial variation in diesel-related concentrations in a very small downtown area, which varied across elemental and organic components., (Copyright © 2016. Published by Elsevier B.V.)

Fine particulate matter (PM2.5) air pollution, varying in concentration and composition, has been shown to cause or exacerbate adverse effects on both human and ecological health. The concept of biomonitoring using deciduous tree leaves as a proxy for intraurban PM air pollution in different areas has previously been explored using a variety of study designs (e.g., systematic coverage of an area, source-specific focus), deciduous tree species, sampling strategies (e.g., single day, multi-season), and analytical methods (e.g., chemical, magnetic) across multiple geographies and climates. Biomonitoring is a low-cost sampling method and may potentially fill an important gap in current air monitoring methods by providing low-cost, longer-term urban air pollution measures. As such, better understanding of the range of methods, and their corresponding strengths and limitations, is critical for employing the use of tree leaves as biomonitors for pollution to improve spatially resolved exposure assessments for epidemiological studies and urban planning strategies.

A growing literature explores intra-urban variation in pollution concentrations. Few studies, however, have examined spatial variation during "peak" hours of the day (e.g., rush hours, inversion conditions), which may have strong bearing for source identification and epidemiological analyses. We aimed to capture "peak" spatial variation across a region of complex terrain, legacy industry, and frequent atmospheric inversions. We hypothesized stronger spatial contrast in concentrations during hours prone to atmospheric inversions and heavy traffic, and designed a 2-year monitoring campaign to capture spatial variation in fine particles (PM2.5) and black carbon (BC). Inversion-focused integrated monitoring (0600-1100 hours) was performed during year 1 (2011-2012) and compared with 1-week 24-h integrated results from year 2 (2012-2013). To allocate sampling sites, we explored spatial distributions in key sources (i.e., traffic, industry) and potential modifiers (i.e., elevation) in geographic information systems (GIS), and allocated 37 sites for spatial and source variability across the metropolitan domain (~388 km(2)). Land use regression (LUR) models were developed and compared by pollutant, season, and sampling method. As expected, we found stronger spatial contrasts in PM2.5 and BC using inversion-focused sampling, suggesting greater differences in peak exposures across urban areas than is captured by most integrated saturation campaigns. Temporal variability, commercial and industrial land use, PM2.5 emissions, and elevation were significant predictors, but did not more strongly predict concentrations during peak hours.

Health effects of fine particulate matter (PM2.5) vary by chemical composition, and composition can help to identify key PM2.5 sources across urban areas. Further, this intra-urban spatial variation in concentrations and composition may vary with meteorological conditions (e.g., mixing height). Accordingly, we hypothesized that spatial sampling during atmospheric inversions would help to better identify localized source effects, and reveal more distinct spatial patterns in key constituents. We designed a 2-year monitoring campaign to capture fine-scale intra-urban variability in PM2.5 composition across Pittsburgh, PA, and compared both spatial patterns and source effects during "frequent inversion" hours vs 24-h weeklong averages. Using spatially distributed programmable monitors, and a geographic information systems (GIS)-based design, we collected PM2.5 samples across 37 sampling locations per year to capture variation in local pollution sources (e.g., proximity to industry, traffic density) and terrain (e.g., elevation). We used inductively coupled plasma mass spectrometry (ICP-MS) to determine elemental composition, and unconstrained factor analysis to identify source suites by sampling scheme and season. We examined spatial patterning in source factors using land use regression (LUR), wherein GIS-based source indicators served to corroborate factor interpretations. Under both summer sampling regimes, and for winter inversion-focused sampling, we identified six source factors, characterized by tracers associated with brake and tire wear, steel-making, soil and road dust, coal, diesel exhaust, and vehicular emissions. For winter 24-h samples, four factors suggested traffic/fuel oil, traffic emissions, coal/industry, and steel-making sources. In LURs, as hypothesized, GIS-based source terms better explained spatial variability in inversion-focused samples, including a greater contribution from roadway, steel, and coal-related sources. Factor analysis produced source-related constituent suites under both sampling designs, though factors were more distinct under inversion-focused sampling.

The causes of autism spectrum disorder (ASD) are not well known. Recent investigations have suggested that air pollution, including PM2.5, may play a role in the onset of this condition. The objective of the present work was to investigate the association between prenatal and early childhood exposure to fine particulate matter (PM2.5) and risk for childhood ASD. A population-based case-control study was conducted in children born between January 1, 2005 and December 31, 2009 in six counties in Southwestern Pennsylvania. ASD cases were recruited from specialty autism clinics, local pediatric practices, and school-based special needs services. ASD cases were children who scored 15 or above on the Social Communication Questionnaire (SCQ) and had written documentation of an ASD diagnosis. Controls were children without ASD recruited from a random sample of births from the Pennsylvania state birth registry and frequency matched to cases on birth year, gender, and race. A total of 217 cases and 226 controls were interviewed. A land use regression (LUR) model was used to create person- and time-specific PM2.5 estimates for individual (pre-pregnancy, trimesters one through three, pregnancy, years one and two of life) and cumulative (starting from pre-pregnancy) key developmental time periods. Logistic regression was used to investigate the association between estimated exposure to PM2.5 during key developmental time periods and risk of ASD, adjusting for mother's age, education, race, and smoking. Adjusted odds ratios (AOR) were elevated for specific pregnancy and postnatal intervals (pre-pregnancy, pregnancy, and year one), and postnatal year two was significant, (AOR=1.45, 95% CI=1.01-2.08). We also examined the effect of cumulative pregnancy periods; noting that starting with pre-pregnancy through pregnancy, the adjusted odds ratios are in the 1.46-1.51 range and significant for pre-pregnancy through year 2 (OR=1.51, 95% CI=1.01-2.26). Our data indicate that both prenatal and postnatal exposures to PM2.5 are associated with increased risk of ASD. Future research should include multiple pollutant models and the elucidation of the biological mechanism for PM2.5 and ASD., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Background: Characterizing intra-urban variation in air quality is important for epidemiological investigation of health outcomes and disparities. To date, however, few studies have been designed to capture spatial variation during select hours of the day, or to examine the roles of meteorology and complex terrain in shaping intra-urban exposure gradients., Methods: We designed a spatial saturation monitoring study to target local air pollution sources, and to understand the role of topography and temperature inversions on fine-scale pollution variation by systematically allocating sampling locations across gradients in key local emissions sources (vehicle traffic, industrial facilities) and topography (elevation) in the Pittsburgh area. Street-level integrated samples of fine particulate matter (PM2.5), black carbon (BC), nitrogen dioxide (NO2), sulfur dioxide (SO2), and ozone (O3) were collected during morning rush and probable inversion hours (6-11 AM), during summer and winter. We hypothesized that pollution concentrations would be: 1) higher under inversion conditions, 2) exacerbated in lower-elevation areas, and 3) vary by season., Results: During July - August 2011 and January - March 2012, we observed wide spatial and seasonal variability in pollution concentrations, exceeding the range measured at regulatory monitors. We identified elevated concentrations of multiple pollutants at lower-elevation sites, and a positive association between inversion frequency and NO2 concentration. We examined temporal adjustment methods for deriving seasonal concentration estimates, and found that the appropriate reference temporal trend differs between pollutants., Conclusions: Our time-stratified spatial saturation approach found some evidence for modification of inversion-concentration relationships by topography, and provided useful insights for refining and interpreting GIS-based pollution source indicators for Land Use Regression modeling.

Unconventional natural gas development in Pennsylvania has created a new wastewater stream. In an effort to stop the discharge of Marcellus Shale unconventional natural gas development wastewaters into surface waters, on May 19, 2011 the Pennsylvania Department of Environmental Protection (PADEP) requested drilling companies stop disposing their wastewater through wastewater treatment plants (WWTPs). This research includes a chemical analysis of effluents discharged from three WWTPs before and after the aforementioned request. The WWTPs sampled included two municipal, publicly owned treatment works and a commercially operated industrial wastewater treatment plant. Analyte concentrations were quanitified and then compared to water quality criteria, including U.S. Environmental Protection Agency MCLs and "human health criteria." Certain analytes including barium, strontium, bromides, chlorides, total dissolved solids, and benzene were measured in the effluent at concentrations above criteria. Analyte concentrations measured in effluent samples before and after the PADEP's request were compared for each facility. Analyte concentrations in the effluents decreased in the majority of samples after the PADEP's request (p < .05). This research provides preliminary evidence that these and similar WWTPs may not be able to provide sufficient treatment for this wastewater stream, and more thorough monitoring is recommended.

Introduction: Concerns for health and social impacts have arisen as a result of Marcellus Shale unconventional natural gas development. Our goal was to document the self-reported health impacts and mental and physical health stressors perceived to result from Marcellus Shale development., Methods: Two sets of interviews were conducted with a convenience sample of community members living proximal to Marcellus Shale development, session 1 March-September 2010 (n = 33) and session 2 January-April 2012 (n = 20). Symptoms of health impacts and sources of psychological stress were coded. Symptom and stressor counts were quantified for each interview. The counts for each participant were compared longitudinally., Results: Participants attributed 59 unique health impacts and 13 stressors to Marcellus Shale development. Stress was the most frequently-reported symptom. Over time, perceived health impacts increased (P = 0·042), while stressors remained constant (P = 0·855)., Discussion: Exposure-based epidemiological studies are needed to address identified health impacts and those that may develop as unconventional natural gas extraction continues. Many of the stressors can be addressed immediately.