Search

The LCOE is a strong techno-economic analysis based on performance, stability, and manufacturing costs to evaluate the potential of perovskites in the solar market. Here, we reported an estimation of perovskites’ LCOE between 4–6 cents (USD) per kWh.

Utilizing four-dimensional scanning ultrafast electron microscopy (4D-SUEM) is a powerful tool to monitor charge dynamics at material surfaces and interfaces especially for the application in renewable energy field. Herein, we uncover unique physical features for 4D-SUEM upon reducing the acceleration of probed primary electrons to 1 keV, for wide range of materials including various single crystals, thin films and quantum dots upon the presence of oxidized and neat surfaces. Working at 1 keV helps to uncover the migration of photogenerated carriers originating from both sub-surface and bulk layers, under the influence of the carriers scattering and the band-bending phenomena. This approach provides a new avenue for the spatial and temporal access to the surface exclusive dynamics in renewable energy materials to unlock their interfacial behaviors at the nanoscale level.

If perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs) are to be commercialized, they must achieve long-term stability, which is usually assessed with accelerated degradation tests. One of the persistent obstacles for PSCs has been successfully passing the damp-heat test (85°C and 85% relative humidity), which is the standard for verifying the stability of commercial photovoltaic (PV) modules. We fabricated damp heat–stable PSCs by tailoring the dimensional fragments of two-dimensional perovskite layers formed at room temperature with oleylammonium iodide molecules; these layers passivate the perovskite surface at the electron-selective contact. The resulting inverted PSCs deliver a 24.3% PCE and retain >95% of their initial value after >1000 hours at damp-heat test conditions, thereby meeting one of the critical industrial stability standards for PV modules.

High-efficiency perovskite-based solar cells comprise sophisticated stacks of materials which, however, often feature different thermal expansion coefficients and are only weakly bonded at their interfaces. This may raise concerns over delamination in such devices, jeopardizing their long-term stability and commercial viability. Here, we investigate the root causes of catastrophic top-contact delamination we observed in state-of-the-art p-i-n perovskite/silicon tandem solar cells. By combining macroscopic and microscopic analyses, we identify the interface between the fullerene electron transport layer and the tin oxide buffer layer at the origin of such delamination. Specifically, we find that the perovskite morphology and its roughness play a significant role in the microscopic adhesion of the top layers, as well as the film processing conditions, particularly the deposition temperature and the sputtering power. Our findings mandate the search for new interfacial linking strategies to enable mechanically strong perovskite-based solar cells, as required for commercialization.

Improving the perovskite/electron-transporting layer (ETL) interface is a crucial task to boost the performance of perovskite solar cells (PSCs).

Advanced functional materials 33(4), 2205557 (2023). doi:10.1002/adfm.202205557, Textured silicon wafers used in silicon solar cell manufacturing offer superior light trapping, which is a critical enabler for high-performance photovoltaics. A similar optical benefit can be obtained in monolithic perovskite/silicon tandem solar cells, enhancing the current output of the silicon bottom cell. Yet, such complex silicon surfaces may affect the structural and optoelectronic properties of the overlying perovskite films. Here, through extensive characterization based on optical and microstructural spectroscopy, it is found that the main effect of such substrate morphology lies in an altering of the photoluminescence response of the perovskite, which is associated with thickness variations of the perovskite, rather than lattice strain or compositional changes. With this understanding, the design of high-performance perovskite/silicon tandems is rationalized, yielding certified power conversion efficiencies of >28%., Published by Wiley-VCH, Weinheim

We applied an organic sensor for the detection and quantification of PbI2 released by perovskite solar cells. The molecule shows a fluorescence intensity enhancement in the presence of Pb2+ cations and is highly selective of the desired analyte.

Summary Stacking perovskite solar cells onto crystalline silicon bottom cells in a monolithic tandem configuration enables power-conversion efficiencies (PCEs) well above those of their single-junction counterparts. However, state-of-the-art wide-band-gap perovskite films suffer from phase stability issues. Here, we show how carbazole as an additive to the perovskite precursor solution can not only reduce nonradiative recombination losses but, perhaps more importantly, also can suppress phase segregation under exposure to moisture and light illumination. This enables a stabilized PCE of 28.6% (independently certified at 28.2%) for a monolithic perovskite/silicon tandem solar cell over ∼1 cm2 and 27.1% over 3.8 cm2, built from a textured silicon heterojunction solar cell. The modified tandem devices retain ∼93% of their performance over 43 days in a hot and humid outdoor environment of almost 100% relative humidity over 250 h under continuous 1-sun illumination and about 87% during a 85/85 damp-heat test for 500 h, demonstrating the improved phase stability.

Perovskite/silicon tandem solar cells are emerging as a high-efficiency and prospectively cost-effective solar technology with great promise for deployment at the utility scale. However, despite the remarkable performance progress reported lately, assuring sufficient device stability-particularly of the perovskite top cell-remains a challenge on the path to practical impact. In this work, we analyze the outdoor performance of encapsulated bifacial perovskite/silicon tandems, by carrying out field-testing in Saudi Arabia. Over a six month experiment, we find that the open circuit voltage retains its initial value, whereas the fill factor degrades, which is found to have two causes. A first degradation mechanism is linked with ion migration in the perovskite and is largely reversible overnight, though it does induce hysteretic behavior over time. A second, irreversible, mechanism is caused by corrosion of the silver metal top contact with the formation of silver iodide. These findings provide directions for the design of new and more stable perovskite/silicon tandems

Summary Stable and efficient perovskite/silicon tandem solar cells require defect passivation and suppression of light-induced phase segregation of the wide-band-gap perovskite. Here, we report how molecules containing both electron-rich and electron-poor moieties, such as phenformin hydrochloride (PhenHCl), can satisfy both requirements, independent of the perovskite’s surface chemical composition and its grain boundaries and interfaces. PhenHCl-passivated wide-band-gap (∼1.68 eV) perovskite p-i-n single-junction solar cells deliver an open-circuit voltage (VOC) ∼100 mV higher than control devices, resulting in power conversion efficiencies (PCEs) up to 20.5%. These devices do not show any VOC losses after more than 3,000 h of thermal stress at 85°C in a nitrogen ambient. Moreover, PhenHCl passivation improves the PCE of textured perovskite/silicon tandem solar cells from 25.4% to 27.4%. Our findings provide critical insights for improved passivation of metal halide perovskite surfaces and the fabrication of highly efficient and stable perovskite-based single-junction and tandem solar cells.

The performance of perovskite solar cells with inverted polarity (p-i-n) is still limited by recombination at their electron extraction interface, which also lowers the power conversion efficiency (PCE) of p-i-n perovskite-silicon tandem solar cells. A MgF x interlayer with thickness of ~1 nanometer at the perovskite/C 60 interface favorably adjusts the surface energy of the perovskite layer through thermal evaporation, which facilitates efficient electron extraction and displaces C 60 from the perovskite surface to mitigate nonradiative recombination. These effects enable a champion open-circuit voltage of 1.92 volts, an improved fill factor of 80.7%, and an independently certified stabilized PCE of 29.3% for a monolithic perovskite-silicon tandem solar cell ~1 square centimeter in area. The tandem retained ~95% of its initial performance after damp-heat testing (85°C at 85% relative humidity) for >1000 hours.

Perovskite/silicon tandem solar cells promise power conversion efficiencies beyond the Shockley–Queisser limit of single-junction devices; however, their actual outdoor performance is yet to be investigated. Here we fabricate 25% efficient two-terminal monolithic perovskite/silicon tandem solar cells and test them outdoors in a hot and sunny climate. We find that the temperature dependence of both the silicon and perovskite bandgaps—which follow opposing trends—shifts the devices away from current matching for two-terminal tandems that are optimized at standard test conditions. Consequently, we argue that the optimal perovskite bandgap energy at standard test conditions is

In this work, we report perovskite solar cells in the planar p–i–n configuration based on single-step, anti-solvent-free, low-temperature (70 °C) slot-die-coated methylammonium lead tri-iodide (MAP...

Metal halide perovskites have emerged in recent years as promising photovoltaic materials due to their excellent optical and electrical properties, enabling perovskite solar cells (PSCs) with certified power conversion efficiencies (PCEs) greater than 25%. Provided radiative recombination is the dominant recombination mechanism, photon recycling – the process of reabsorption (and re-emission) of photons that result from radiative recombination – can be utilized to further enhance the PCE toward the Shockley–Queisser (S-Q) theoretical limit. Geometrical optics can be exploited for the intentional trapping of such re-emitted photons within the device, to enhance the PCE. However, this scheme reaches its fundamental diffraction limits at the submicron scale. Therefore, introducing photonic nanostructures offer attractive solutions to manipulate and trap light at the nanoscale via light coupling into guided modes, as well as localized surface plasmon and surface plasmon polariton modes. This review focuses on light-trapping schemes for efficient photon recycling in PSCs. First, we summarize the working principles of photon recycling, which is followed by a review of essential requirements to make this process efficient. We then survey photon recycling in state-of-the-art PSCs and propose design strategies to invoke light-trapping to effectively exploit photon recycling in PSCs. Finally, we formulate a future outlook and discuss new research directions in the context of photon recycling.

Stacking solar cells with decreasing band gaps to form tandems presents the possibility of overcoming the single-junction Shockley-Queisser limit in photovoltaics. The rapid development of solution-processed perovskites has brought perovskite single-junction efficiencies >20%. However, this process has yet to enable monolithic integration with industry-relevant textured crystalline silicon solar cells. We report tandems that combine solution-processed micrometer-thick perovskite top cells with fully textured silicon heterojunction bottom cells. To overcome the charge-collection challenges in micrometer-thick perovskites, we enhanced threefold the depletion width at the bases of silicon pyramids. Moreover, by anchoring a self-limiting passivant (1-butanethiol) on the perovskite surfaces, we enhanced the diffusion length and further suppressed phase segregation. These combined enhancements enabled an independently certified power conversion efficiency of 25.7% for perovskite-silicon tandem solar cells. These devices exhibited negligible performance loss after a 400-hour thermal stability test at 85°C and also after 400 hours under maximum power point tracking at 40°C.

Crystalline silicon (c-Si) solar cells comprise more than 95% of the photovoltaics (PV) market. At wafer-scale, this technology is gradually reaching its practical power conversion efficiency (PCE) limit. Therefore, new performance-driven and scalable alternatives must be developed to further increase the cost-competitiveness of PV. Stacked PV absorbers with decreasing bandgaps in a tandem configuration utilize more efficiently the solar spectrum, and can thereby overcome the single-junction efficiency limit of conventional solar cells. Specifically, the monolithic, two-terminal tandem solar cell implementation promises a simple, yet high-performance technology with high market-relevance. Metal-halide perovskite absorbers have attracted broad interest in their application as the top cell of such a c-Si based tandem solar cell configuration. Practically, the perovskite and c-Si subcells need to be electronically coupled, where the interfacial structure should guarantee efficient charge recombination of majority carriers (collected from each subcell), without inducing minority-carrier recombination. In this article, we review the mechanism underlying efficient recombination junctions, and discuss available materials systems for perovskite-based tandems, as well as additional requirements such as efficient light coupling into the subcells, processing compatibility, scalability of materials and methods, and stability. We extend our discussion beyond c-Si to thin-film bottom cell technologies such as low-bandgap perovskites and chalcogenides. We conclude with an outlook on considerations for industrialization of such interfacial structures.

Co-evaporated perovskite solar cells have shown outstanding scalability, intrinsic stability, high efficiency and adaptability on rough surfaces. Here we present an optimal hybrid method to wide the co-evaporated MAPbI3's bandgap by a MABr treatment.

Perovskite/silicon tandem solar cells promise power conversion efficiencies (PCE) beyond the thermodynamic limit of single-junction devices. This potential has been unveiled via several champion devices, however, their actual outdoor performance is yet to be investigated. Here, we fabricate 25 %-efficient two-terminal (2T) monolithic perovskite/silicon tandem solar cells and test them outdoors to reveal the characteristics of these devices specifically in hot and sunny climates, which are the ideal locations to operate such efficient photovoltaic devices. In this article, we summarize our observation on the perovskite/silicon tandem solar cells under actual operational conditions and discuss the lessons we take from our interpretations.

Summary Mixed lead halide perovskite solar cells have been demonstrated to benefit tremendously from the addition of Cs+ and Rb+, but its root cause is yet to be understood. This hinders further improvement, and processing approaches remain largely empirical. We address the challenge by tracking the solidification of precursors in situ and linking the evolutions of different crystalline phases to the presence of Cs+ and Rb+. In their absence, the perovskite film is inherently unstable, segregating into MA-I- and FA-Br-rich phases. Adding either Cs+ or Rb+ is shown to alter the solidification process of the perovskite films. The optimal addition of both Cs+ and Rb+ drastically suppress phase segregation and promotes the spontaneous formation of the desired α phase. We propose that the synergistic effect is due to the collective benefits of Cs+ and Rb+ on the formation kinetics of the α phase and on the halide distribution throughout the film.

Summary High-performance passivating contact is a prerequisite for high-efficiency crystalline silicon (c-Si) solar cells. In this work, an electron-conductive, hole-blocking contact based on titanium nitride (TiN) deposited by reactive magnetron sputtering is presented. Quasi-metallic TiN combined with an ultrathin SiO2 passivation layer (SiO2/TiN) is demonstrated to be an effective electron-selective contact on c-Si, featuring a low-contact resistivity of 16.4 mΩ.cm2 and a tolerable recombination current parameter of ∼500 fA/cm2. By implementing the dual-function SiO2/TiN contact, which acts simultaneously as a surface passivating layer and metal electrode, an efficiency of 20% is achieved by an n-type c-Si solar cell with a simple structure. This work not only demonstrates a way to develop efficient n-type c-Si solar cells with dual-function metal nitride contacts at a low cost but also expands the pool of available carrier transport materials, from metal oxides to metal nitrides, for photovoltaic devices.

Bifacial monolithic perovskite/silicon tandem solar cells exploit albedo—the diffuse reflected light from the environment—to increase their performance above that of monofacial perovskite/silicon tandems. Here we report bifacial tandems with certified power conversion efficiencies >25% under monofacial AM1.5G 1 sun illumination that reach power-generation densities as high as ~26 mW cm–2 under outdoor testing. We investigated the perovskite bandgap required to attain optimized current matching under a variety of realistic illumination and albedo conditions. We then compared the properties of these bifacial tandems exposed to different albedos and provide energy yield calculations for two locations with different environmental conditions. Finally, we present a comparison of outdoor test fields of monofacial and bifacial perovskite/silicon tandems to demonstrate the added value of tandem bifaciality for locations with albedos of practical relevance. Bifacial solar cells can outperform monofacial cells by exploiting sunlight reflected off the ground surface. De Bastiani et al. show that bifacial perovskite/silicon tandem with an optimized bandgap can deliver a power density of 26 mW cm–2 and compare its performance to monofacial cells under outdoor conditions.

Translating the high power conversion efficiencies of single-junction perovskite solar cells in their classic, non-inverted (n-i-p) architecture to efficient monolithic n-i-p perovskite/silicon tandem solar cells with high current densities has been a persistent challenge due to the lack of low-temperature processable, chemically-insoluble contact materials with appropriate polarity and sufficient optical transparency. To address this, we developed sputtered amorphous niobium oxide (a-NbOx) with ligand-bridged C-60 as an efficient electron-selective contact, deposited on the textured-silicon bottom cell. For the sunward, hole-selective contact we implemented a stack of molecularly doped broadband transparent evaporated 2,2 ',7,7 '-tetra(N,N-di-p-tolyl)amino-9,9-spirobifluorene (spiro-TTB) and atomic layer deposited vanadium oxide, which further enhances the device quantum efficiency. Combining these contact materials with two-dimensional perovskite passivation on the micrometer-thick solution-processed perovskite top cell yields 27% efficient monolithic n-i-p perovskite/silicon tandem solar cells, which represents one of the highest power conversion efficiencies reported on pyramidal textured crystalline silicon bottom cells, and the highest with this polarity. The authors would like to thanks to Nini Wei for the TEM images; funding: the research reported in this publication was supported by funding from King Abdullah University of Science and Technology (KAUST) under award no. OSR-CARF/CCF-3079 and award no. IED OSR-2019-4208.

A coupled mechanical and electrical characterization method to monitor the correlation of organic photovoltaic (OPV) electrode resistance and cell performance upon tensile strain and to verify the cause of deterioration and the effect of OPV performance under tensile stress has been developed. Both a commercial OPV module and ethylene tetrafluoroethylene (ETFE) membrane-printed OPV electrode layers have been tested by applying the method. The encapsulation layer strength has been found to be the mechanical bottleneck of the tested commercial OPV module. The decrease in the transparent electrode conductance has been found to be responsible for cell degradation upon tensile strain, with the threshold tensile strain at approximately 2%. A test results comparison between ETFE- and polyethylene terephthalate (PET)-printed OPV layers demonstrated that ETFE-printed electrodes are less brittle and sensitive to tensile strain owing to the network pattern response of ETFE-printed electrodes. In addition, the adoption of Ag/poly(3,4-ethylenedioxythiophene) (PEDOT) layering can improve the tensile strain threshold to almost double to maintaining 80% of the initial normalized layer conductance through the advantage of its “bridging effect”. Collectively, our results provide valuable information and illustrate a promising future for architectural membrane printed OPV.

Cesium lead halide perovskite materials have attracted considerable attention for potential applications in lasers, light-emitting diodes, and photodetectors. Here, we provide the experimental and theoretical evidence for photon recycling in CsPbBr3 perovskite microwires. Using two-photon excitation, we recorded photoluminescence (PL) lifetimes and emission spectra as a function of the lateral distance between PL excitation and collection positions along the microwire, with separations exceeding 100 μm. At longer separations, the PL spectrum develops a red-shifted emission peak accompanied by an appearance of well-resolved rise times in the PL kinetics. We developed quantitative modeling that accounts for bimolecular recombination and photon recycling within the microwire waveguide and is sufficient to account for the observed decay modifications. It relies on a high radiative efficiency in CsPbBr3 perovskite microwires and provides crucial information about the potential impact of photon recycling and wa...

Although halide perovskite nanocrystals (NCs) are promising materials for optoelectronic devices, they suffer severely from chemical and phase instabilities. Moreover, the common capping ligands like oleic acid and oleylamine that encapsulate the NCs will form an insulating layer, precluding their utility in optoelectronic devices. To overcome these limitations, we develop a postsynthesis passivation process for CsPbI3 NCs by using a bidentate ligand, namely 2,2′-iminodibenzoic acid. Our passivated NCs exhibit narrow red photoluminescence with exceptional quantum yield (close to unity) and substantially improved stability. The passivated NCs enabled us to realize red light-emitting diodes (LEDs) with 5.02% external quantum efficiency and 748 cd/m2 luminance, surpassing by far LEDs made from the nonpassivated NCs.

S.Z. and F.H.I. contributed equally to this work. The authors thank the members of the KAUST Solar Center operations team for their technical help and support. This publication is based upon work supported by the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under award no. KAUST OSR-2018-CARF/CCF-3079, KAUST OSR-CRG RF/1/3383, KAUST OSR-CRG2018-3737, and IED OSR-2019-4208.

CsPb2Br5 is a ternary halogen-plumbate material with close characteristics to the well-reported halide perovskites. Owing to its unconventional two-dimensional structure, CsPb2Br5 is being looked at broadly for potential applications in optoelectronics. CsPb2Br5 investigations are currently limited to nanostructures and powder forms of the material, which present unclear and conflicting optical properties. In this study, we present the synthesis and characterization of CsPb2Br5 bulk single crystals, which enabled us to finally clarify the material's optical features. Our CsPb2Br5 crystal has a two-dimensional structure with Pb2Br5− layers spaced by Cs+ cations, and exhibits approximately 3.1 eV indirect band gap with no emission in the visible spectrum.

Zero-dimensional perovskite-related structures (0D-PRS) are a new frontier of perovskite-based materials. 0D-PRS, commonly synthesized in powder form, manifest distinctive optical properties such as strong photoluminescence (PL), narrow emission line width, and high exciton binding energy. These properties make 0D-PRS compelling for several types of optoelectronic applications, including phosphor screens and electroluminescent devices. However, it would not be possible to rationally design the chemistry and structure of these materials, without revealing the origins of their optical behavior, which is contradictory to the well-studied APbX3 perovskites. In this work, we synthesize single crystals of Cs4PbBr6 0D-PRS, and investigated the origins of their unique optical and electronic properties. The crystals exhibit a PL quantum yield higher than 40%, the highest reported for perovskite-based single crystals. Time-resolved and temperature dependent PL studies, supported by DFT calculations, and structural ...

The authors acknowledge the financial support of King Abdullah University of Science and Technology (KAUST).