Search

Active noise control (ANC) systems employing adaptive filters suffer from stability issues in the presence of impulsive noise. New impulsive noise control algorithms based on filtered-x recursive least square (FxRLS) algorithm are presented. The FxRLS algorithm gives better convergence than the filtered-x least mean square (FxLMS) algorithm and its variants but lacks robustness in the presence of high impulsive noise. In order to improve the robustness of FxRLS algorithm for ANC of impulsive noise, two modifications are suggested. First proposed modification clips the reference and error signals while, the second modification incorporates energy of the error signal in the gain of FxRLS (MGFxRLS) algorithm. The results demonstrate improved stability and robustness of proposed modifications in the FxRLS algorithm. However, another limitation associated with the FxRLS algorithm is its computationally complex nature. In order to reduce the computational load, a hybrid algorithm based on proposed MGFxRLS and normalized step size FxLMS (NSS-FXLMS) is also developed in this paper. The proposed hybrid algorithm combines the stability of NSS-FxLMS algorithm with the fast convergence speed of the proposed MGFxRLS algorithm. The results of the proposed hybrid algorithm prove that its convergence speed is faster than that of NSS-FxLMS algorithm with computational complexity lesser than that of FxRLS algorithm. [ABSTRACT FROM AUTHOR]

[Display omitted] • A miniaturized compact chipless RFID tag of 39 × 40 mm2 with 22-bit data density is proposed in this work. • The 'U' and 'inverted U' slots are closely placed in special arrangement to avoid mutual coupling between the resonance response. • The 22-bit tag is capable to tag 222 = 4,194,304 objects. • The 22-bit data dense tag produces the overall RCS response in 1.7 GHz band. • The realized tag is low-cost, and readily available. One of the critical challenges in deploying radio frequency identification (RFID) is its cost of production. An approach to mitigate and be cost-effective is to design chipless, inexpensive electronic tags having a smaller size. Therefore, in this paper, a novel 22-bit passive chipless RFID tag with an enhanced radar cross-section (RCS) response is proposed. The tag design is loaded with 'U' and 'Inverted-U' shaped slots. The 'U' and 'Inverted-U' slots are etched on a metallic plate of size 39x40 mm2 for 22-bit data capacity and the tag can label 222 = 4,194,304 objects. The final tag design is optimized for Taconic TLX-0 and RT/duroid®5880 substrates. Each 'U' and 'Inverted-U' shaped loaded slot are of different lengths and thus yield resonance at a particular frequency. The presence of a dip corresponds to the '1′ bit and the '0′ bit is achieved in the data word by shortening the particular slot. A detuning correction scheme is proposed by placing the slots in a special arrangement. By opting for this approach not only the tag exhibits an improved RCS response but also, the effect of shorted slot representing '0′ on the neighboring dip is reduced. The proposed RFID tag can be deployed in tracking inventory, logistics, and low-cost business applications. [ABSTRACT FROM AUTHOR]

Public health and its related facilities are crucial for thriving cities and societies. The optimum utilization of health resources saves money and time, but above all, it saves precious lives. It has become even more evident in the present as the pandemic has overstretched the existing medical resources. Specific to patient appointment scheduling, the casual attitude of missing medical appointments (no-show-ups) may cause severe damage to a patient's health. In this paper, with the help of machine learning, we analyze six million plus patient appointment records to predict a patient's behaviors/characteristics by using ten different machine learning algorithms. For this purpose, we first extracted meaningful features from raw data using data cleaning. We applied Synthetic Minority Oversampling Technique (SMOTE), Adaptive Synthetic Sampling Method (Adasyn), and random undersampling (RUS) to balance our data. After balancing, we applied ten different machine learning algorithms, namely, random forest classifier, decision tree, logistic regression, XG Boost, gradient boosting, Adaboost Classifier, Naive Bayes, stochastic gradient descent, multilayer perceptron, and Support Vector Machine. We analyzed these results with the help of six different metrics, i.e., recall, accuracy, precision, F1-score, area under the curve, and mean square error. Our study has achieved 94% recall, 86% accuracy, 83% precision, 87% F1-score, 92% area under the curve, and 0.106 minimum mean square error. Effectiveness of presented data cleaning and feature selection is confirmed by better results in all training algorithms. Notably, recall is greater than 75%, accuracy is greater than 73%, F1-score is more significant than 75%, MSE is lesser than 0.26, and AUC is greater than 74%. The research shows that instead of individual features, combining different features helps make better predictions of a patient's appointment status. [ABSTRACT FROM AUTHOR]

The global orange industry constantly faces new technical challenges to meet consumer demands for quality fruits. Instead of traditional subjective fruit quality assessment methods, the interest in the horticulture industry has increased in objective, quantitative, and non-destructive assessment methods. Oranges have a thick peel which makes their non-destructive quality assessment challenging. This paper evaluates the potential of short-wave NIR spectroscopy and direct sweetness classification approach for Pakistani cultivars of orange, i.e., Red-Blood, Mosambi, and Succari. The correlation between quality indices, i.e., Brix, titratable acidity (TA), Brix: TA and BrimA (Brix minus acids), sensory assessment of the fruit, and short-wave NIR spectra, is analysed. Mix cultivar oranges are classified as sweet, mixed, and acidic based on short-wave NIR spectra. Short-wave NIR spectral data were obtained using the industry standard F-750 fruit quality meter (310–1100 nm). Reference Brix and TA measurements were taken using standard destructive testing methods. Reference taste labels i.e., sweet, mix, and acidic, were acquired through sensory evaluation of samples. For indirect fruit classification, partial least squares regression models were developed for Brix, TA, Brix: TA, and BrimA estimation with a correlation coefficient of 0.57, 0.73, 0.66, and 0.55, respectively, on independent test data. The ensemble classifier achieved 81.03% accuracy for three classes (sweet, mixed, and acidic) classification on independent test data for direct fruit classification. A good correlation between NIR spectra and sensory assessment is observed as compared to quality indices. A direct classification approach is more suitable for a machine-learning-based orange sweetness classification using NIR spectroscopy than the estimation of quality indices. [ABSTRACT FROM AUTHOR]

The non-linearity in medical image processing is a critical issue. Because the privacy of the medical image and loss of data is a major concern in recent years. Federated learning is a most advanced form of machine learning in which, rather than transmitting data to local server, a machine learning (ML) algorithm is installed to various devices to train on the information. The parameters from the separate modules will then be transferred to a master ML/ (deep learning) DL model for global training. The research of Image Quality Assessment (IQA) aims to simulate the process of human perception of image quality and construct an objective image quality model as consistent as possible with subjective assessment. The existing IQA methods can be roughly divided into traditional methods and deep learning methods. Traditional methods are knowledge-driven, using prior knowledge or assumptions about the human visual system (HVS) to heuristically design image quality index. Deep learning methods are data-driven, using a large amount of annotated data to learn the mapping from the image to its visual quality end-to-end. To effectively integrate traditional methods into deep networks and investigate the knowledge (model)-driven deep learning methods are the current mainstream trends in IQA research. In this paper, we take the contrary direction and improve traditional methods guided by the cue from deep learning methods. The main works include: 1. the employment of activation function ensure the nonlinear approximation ability of the neural network, here we first extend the two-stage framework widely used in the field of full-reference image quality assessment and propose a nonlinear two-stage framework. 2. Within this framework, we revisit the Edge Strength SIMlarity (ESSIM) algorithm that we previously published in IEEE Signal Processing Letters, and proposed the Nonlinear Edge Strength SIMlarity (NESSIM) algorithm. Experiments on public databases show that NESSIM can obtain good assessment results in traditional methods. • Improve traditional methods guided by the cue from deep learning methods. • Employment of activation function ensure the nonlinear approximation ability of the neural network. • Propose a nonlinear two-stage framework • Proposed the Nonlinear Edge Strength SIMlarity (NESSIM) algorithm. [ABSTRACT FROM AUTHOR]

• A new method for rice variety identification. • The classifier takes both spectral and time series information of each pixel. • Spectral unmixing model is used for labelling each pixel. • Radiometric indices are used to increase classification accuracy. • Experimental results have exhibited an overall accuracy of 98.6%. In the agriculture sector food productivity, security, and sustainability, imposed challenges on farmers, regulatory bodies, and policymakers due to increasing demand and depleting natural resources and environmental concerns. Rice crop holds a prominent place in Pakistan's agriculture sector, it is not only consumed locally but also exported to many countries including China. Gathering crop information such as variety maps, yield estimation, or etc. can help farmers, regulatory bodies, policymakers, and rice mills in decision-making. In Pakistan, crop information is collected through manual field surveys that require a lot of human labor, are costly, and are time-consuming. One cannot ignore human error and bias in the process. A new framework for pixel classification is proposed that uses both spectral and time-series data of Sentinal-2 satellite for mapping two rice varieties "Basmati" and "IRRI, grown in Pakistan. The data were collected from twelve rice fields (approx. 307 acres) of different geographical locations at 16-time instances to cover the complete rice-growing season (May–October) in 2019. A linear spectral unmixing model is used to determine sub-pixel information of water, soil, and vegetation content, which is used for labeling each pixel for supervised learning. The input to our classifier is a 16 × 15 image formed using 15 spectral features (12 spectral bands and 3 radiometric indices) of 16 carefully selected different time instances for each pixel. The output is a pixel-level classification (semantic segmentation) of each pixel into Basmati, IRRI, and others (soil, water, etc.). Experimental results have exhibited an excellent overall accuracy of 98.6% with the proposed approach. The Basmati rice obtained higher accuracy of 99.7% as compared to IRRI rice with an accuracy of 95.2%. [ABSTRACT FROM AUTHOR]