Search

Background: Bisphenol A (BPA) exposure has been associated with increased incidence of diabetes and obesity in adults. Objectives: To evaluate whether an association between BPA urinary levels and insulin resistance as well as adiponectin and resistin production and serum concentrations may occur in obese children. Methods: Clinical and biochemical features of 141 obese children were collected. Serum resistin and adiponectin were evaluated. Insulin resistance and urinary BPA levels were assessed. Moreover, the effect of BPA on adiponectin and resistin gene expression in adipocytes from eight normal weight prepubertal children was investigated by quantitative real-time RT-PCR (qPCR). Results: Direct association between BPA and homeostasis model assessment (r = 0.23; p: 0.0069) and a strong inverse association between BPA and adiponectin have been found (r = −0.48; p < 0.0001). In adipocytes, resistin expression was detected only after BPA treatment, while adiponectin expression resulted down-regulated after BPA exposure (p < 0.05 at both 10 and 100 nM BPA concentrations). Conclusions: We suggest the involvement of BPA in the development of insulin resistance in childhood obesity highlighting that urinary BPA levels are directly associated with insulin resistance regardless of BMI. This association may be explained, at least partly, by the findings that BPA affects resistin and adiponectin production in adipose tissue cultures.

A thionine-modified carbon paste electrode for catechol and Bisphenol A (BPA) detection is presented. Graphite powder was modified by adsorbing thionine as electrochemical mediator. The electrochemical response of the modified carbon paste electrode (CPE) was determined before electrode modification with tyrosinase. Then, tyrosinase was added in order to assemble a biosensor. Once established the best operative conditions, an interelectrode reproducibility around 7% was obtained and the resulting biosensor showed improved sensitivities and (S = 139.6±1.1 nA/*M for catechol and S = 85.4±1.5 nA/*M for BPA) in comparison with the biosensor constructed without thionine (S = 104.4±0.5 nA/*M for catechol and S = 51.1±0.6 nA/*Mfor BPA) and low detection limits (0.15*Mfor both the electrodes and analytes). Also the comparison with the results reported in the literature showed higher sensitivity and lower detection limit for our biosensor. Moreover the functioning of the thionine-tyrosinase CPE was validated following a biodegradation process of water polluted by BPA and comparing the time changes of BPA concentration inferred by the biosensor calibration curve and those determined by means of HPLC measurements

The degradation and mineralization of the nonionic surfactant octylphenol ethoxylate (OPEO), commercially known as Triton (TM) X-45, by the peroxymonosulfate (PMS)/UV-C process were investigated. Three different toxicity tests (Daphnia magna, Vibrio fischeri and Pseudokirchneriella subcapitata) as well as the Yeast Estrogen Screen (YES) bioassay were undertaken to evaluate the potential toxic and estrogenic effects of OPEO and its oxidation products. OPEO removal was very fast and complete after 7 min via PMS/UV-C treatment under the investigated reaction conditions (OPEO = 20 mg L-1 (47 mu M); TOC = 12 mg L-1; PMS = 2.5 mM; initial reaction pH = 6.5; applied UV-C dose = 21 Wh L-1). TOC removal also proceeded rapidly; a gradual decrease was observed resulting in an overall TOC removal of 84%. The toxic responses of PMS/UV-C treated OPEO solutions varied according to the test organism used in the bioassay. Daphnia magna was found to be most sensitive to aqueous OPEO, whereas Pseudokirchneriella subcapitata appeared to be the least sensitive one. Daphnia magna and Vibrio fischeri tests revealed that the inhibitory effect of OPEO decreased significantly during the course of treatment. On the other hand, PMS/UV-C oxidation products exhibited a high toxic effect towards Pseudokirchneriella subcapitata (around 60%). YES test results underlined the need for improving the PMS/UV-C treatment performance to remove the estrogenic activity of OPEO and its oxidation products.

Laccase from Rhus vernicifera was immobilized on a polypropylene membrane chemically modified with chromic acid. Ethylenediamine and glutaraldehyde were used as spacer and bifunctional coupling agent, respectively. Phenol was used as substrate. To know how the immobilization procedures affected the enzyme reaction rate the catalytic behavior of soluble and insoluble laccase was studied under isothermal conditions as a function of pH, temperature and substrate concentration. From these studies, two main singularities emerged: (i) the narrower pH–activity profile of the soluble enzyme in comparison to that of the insoluble counterpart and (ii) the increase in pH and thermal stability of the insoluble enzyme. The laccase catalytic behaviorwas also studied in a non-isothermal bioreactor as a function of substrate concentration and size of the applied transmembrane temperature difference. It was found that, under non-isothermal conditions and keeping constant the average temperature of the bioreactor, the enzyme reaction rate linearly increased with the increase of the temperature difference.

The bioremediation of waters polluted by Bisphenol A, taken as a model for endocrine disruptors, has been pursued by means of catalytic membranes in bioreactors operating under isothermal and non-isothermal conditions. Laccase from Trametes versicolor was immobilized on nylon membranes grafted with Glycidyl Methacrylate and using Phenylendiamine as spacer. The behaviour of the catalytic membrane was studied as a function of BPA concentration. Affinities of immobilized laccase towards BPA were found to increase with average temperature and under nonisothermal conditions. Percentage increases of enzyme activity, proportional to the applied temperature differences, were found to decrease with the increase of BPA concentrations. Interestingly, the highest levels of BPA biodegradation occurred at the lowest concentrations, in other words those present in wastewaters given the small water solubility of this compound. The results are discussed in terms of the process of thermodialysis by considering the additional BPA fluxes towards the immobilized enzymes driven by the temperature gradients.

The behaviour of three different laccase-based graphite biosensors was studied in view of their use in agricultural or industrial waters polluted by phenolic compounds. Catechol was used as a substrate model. Laccase from Trametes versicolor was immobilized on one biosensor (type A electrode) by adsorption while, on the other two biosensor types, laccase was covalently bound through the carboxylic groups created on the graphite by means of treatment with an electric potential difference (type B electrode) or with nitric acid (type C electrode). In the latter two cases, hexamethylenediamine and glutaraldehyde were used as the spacer and the coupling agent, respectively. The extension of linear response range and the sensitivity and time stability of each biosensor type were investigated. The type C biosensor gave the best results and its electrochemical properties proved comparable to those reported by other authors.

The effect of the immobilization time on the activity of immobilized â-galactosidase from K. lactis was investigated. Six biocatalytic membranes, different only for the time of the enzyme immobilization, were obtained by using nylon membranes grafted with glycidyl methacrylate (GMA) and activated by hexamethylenediamine (HMDA) and glutaraldehyde (Glu), used as spacer and coupling agent, respectively. Comparison between the isothermal and nonisothermal yield of these biocatalytic membranes was carried out in the process of lactose hydrolysis in milk. All of the results, reported as a function of the immobilization time, have evidenced the influence of our variable parameter on the activity of the catalytic membranes. The membrane giving highest yield under isothermal and nonisothermal conditions was that obtained with 2 h of immobilization time. The industrial application of these membranes has been discussed in terms of percentage reduction of the production times.

A modified polyethersulphone graft membrane was loaded with antiproteases, with the aim of reducing the active protease blood concentration during hemodialysis in acute catabolic renal failure or cardiopulmonary bypass. As protease/antiprotease system, elastase and α 1 -antitrypsin were used. The concentration of active elastase in aqueous solutions decreased as function of contact time with the membrane, approaching saturation. A 40% loss of elastase activity was obtained at pH 7.4, which was not due to autolysis, which accounted for 5% of the loss. The highest reduction was achieved at pH 9.0 (25% higher than at pH 7.4). The saturation level of elastase decrease, calculated by means of the Einstein equation, was reached after more than 47 minutes. We speculate that a time reduction might be achieved either increasing the concentration of immobilized antiproteases, or increasing the rate of elastase movement across the membranes by hydraulic, osmotic, or temperature gradients. This technology can be applied to hemodialysis, and in extracorporeal blood circulation to promote elastase release.

A modified polyethersulphone graft membrane was loaded with antiproteases, with the aim of reducing the active protease blood concentration during hemodialysis in acute catabolic renal failure or cardiopulmonary bypass. As protease/antiprotease system, elastase and alpha1-antitrypsin were used. The concentration of active elastase in aqueous solutions decreased as function of contact time with the membrane, approaching saturation. A 40% loss of elastase activity was obtained at pH 7.4, which was not due to autolysis, which accounted for 5% of the loss. The highest reduction was achieved at pH 9.0 (25% higher than at pH 7.4). The saturation level of elastase decrease, calculated by means of the Einstein equation, was reached after more than 47 minutes. We speculate that a time reduction might be achieved either increasing the concentration of immobilized antiproteases, or increasing the rate of elastase movement across the membranes by hydraulic, osmotic, or temperature gradients. This technology can be applied to hemodialysis, and in extracorporeal blood circulation to promote elastase release.

A new hydrophobic and catalytic membrane was prepared by immobilizing Penicillin G acylase (PGA, EC.3.5.1.11) from E. coli on a nylon membrane, chemically grafted with butylmethacrylate (BMA). Hexamethyldiamine (HMDA) and glutaraldehyde (Glu) were used as a spacer and coupling agent, respectively. PGA was used for the enzymatic synthesis of cephalexin, using D(-)-phenylglycine methyl ester (PGME) and 7-amino-3-deacetoxycephalosporanic acid (7-ADCA) as substrates. Cephalexin production was studied in a bioreactor operating under non-isothermal conditions, and was found to linearly increase with the applied temperature gradient. A temperature difference of about 3 °C across the catalytic membrane resulted into a cephalexin synthesis increase of 100 % with a 50 % reduction of the production times. The efficiency of the system was also determined at various concentrations of the two substrates, by calculating the a* coefficients, which represent the percentage increase of enzyme activity when a unit temperature difference is applied across the catalytic membrane. An equation relating the percentage reduction of the production times to the percentage activity increases was also determined. The membrane was also physically characterized, by estimating its hydrophobicity through the values of the hydraulic and thermoosmotic permeability coefficients. The advantage of using non-isothermal bioreactors in biotechnological processes, including pharmaceutical applications, is also discussed