Search

Having lower quantization resolution, has been introduced in the literature, as a solution to reduce the power consumption of massive MIMO and millimeter wave MIMO systems. In this paper, we analyze bit error rate (BER) performance of quantized uplink massive MIMO employing a few-bit resolution ADCs. Considering Zero-Forcing (ZF) detection, we derive a closed-form quantized signal-to-interference-plus-noise ratio (SINR) to achieve an analytical BER approximation for coarse quantized M-QAM massive MIMO systems, by using a linear quantization model. The proposed expression is a function of quantization resolution in bits. We further numerically investigate the effects of different quantization levels, from 1-bit to 4-bits, on the BER of three modulation types of QPSK, 16-QAM, and 64-QAM. Uniform and non-uniform quantizers are employed in our simulation. Monte Carlo simulation results reveal that our approximate formula gives a tight upper bound for the BER performance of $b$-bit resolution quantized systems using non-uniform quantizers, whereas the use of uniform quantizers cause a lower performance for the same systems. We also found a small BER performance degradation in coarse quantized systems, for example 2-3 bits QPSK and 3-4 bits 16-QAM, compared to the full-precision (unquantized) case. However, this performance degradation can be compensated by increasing the number of antennas at the BS., Comment: 9 pages, 7 figures, submitted to the IEEE Journals

Beam alignment for millimeter wave (mm Wave) vehicular communications is challenging due to the high mobility of vehicles. Recent studies have proposed some beam switching techniques at Road Side Unit (RSU) for vehicle to infrastructure (V2I) communications, employing initial position and speed information of vehicles, that are sent through Dedicated Short Range Communications (DSRC) to the RSU. However, inaccuracies of the provided information lead to beam misalignment. Some beam design parameters are suggested in the literature to combat this effect. But how these parameters should be tuned? Here, we evaluate the effect of all these parameters, and propose a beam design efficiency metric to perform beam alignment in the presence of the estimation errors, and to improve the performance by choosing the right design parameters., Comment: 6 pages, 7 figures, accepted to be published in iccke 2017

Massive multiple-input multiple-output (MIMO) is a promising technology for next generation wireless communication systems (5G). In this technology, Base Station (BS) is equipped with a large number of antennas. Employing high resolution analog-to-digital converters (ADCs) for all antennas may cause high costs and high power consumption for the BS. By performing numerical results, we evaluate the use of low-resolution ADCs for uplink massive MIMO by analyzing Bit Error Rate (BER) performance for different detection techniques (MMSE, ZF) and different modulations (QPSK, 16-QAM) to find an optimal quantization resolution. Our results reveal that the BER performance of uplink massive MIMO systems with a few-bit resolution ADCs is comparable to the case of having full precision ADCs. We found that the optimum choice of quantization level (number of bits in ADCs) depends on the modulation technique and the number of antennas at the BS., Comment: 4 pages, 9 figures; accepted for publication in iccke 2017