Search

The conformal surface coating of Ni-rich layered cathode materials is essential for mitigating their interfacial and subsequent structural degradation. The zirconia (ZrO2) coating effectively enhances the surface stability of the cathode owing to its excellent chemical durability; however, the insulating electrical conductivity of ZrO2 increases the electrode resistance and triggers efficiency decay. Here, we propose highly conductive oxygen-deficient black ZrO2−x as a charge-conductive coating material. The black ZrO2−x is uniformly coated onto the Ni-rich LiNi0.8Mn0.1Co0.1O2 (NMC) surface via a solvent-free mechanochemical shearing process. Benefiting from the black ZrO2−x coating layer, black ZrO2−x coated NMC shows improved cycling characteristics and better rate capability than both bare NMC and ZrO2 coated NMC. The enhanced electrochemical performance by the conformal coating of black ZrO2−x mainly results from enhanced charge transfer, reduced gas evolution, and mitigated microstructural cracking. Density functional theory calculations confirm that the defective structure of black ZrO2−x lowers the energy barrier for Li ion transfer, and strong hybridization between Zr in black ZrO2−x and O in NMC mitigates oxygen evolution. [ABSTRACT FROM AUTHOR]

Lithium–oxygen (Li–O2) batteries, recognized as candidates for the highest energy storage, face challenges of irreversibility and low efficiency due to insulating discharge products. Addressing these issues, our study explores innovative dual-atom catalysts (DACs) comprising non-precious metals, specifically atomically scaled nickel (Ni) and iron (Fe), positioned on defective mesopore sites of nitrogen-doped carbon nanotubes (NCNTs) to enhance battery performance. We successfully achieved the synthesis of both homogeneous (Fe–Fe-NCNTs and Ni–Ni-NCNTs) and heterogeneous (Ni–Fe-NCNTs and Fe–Ni-NCNTs) DACs on NCNTs, by varying the loading sequences and combination of Ni and Fe. Our findings demonstrate that Fe-first-loaded DACs, particularly heterogeneous Ni–Fe-NCNT variants, excelled in both NO2− mediation reactivity and catalytic activity, achieving a longer lifespan of 200 cycles and maintaining consistent ORR/OER overpotential. Insights into the mesoporous loading sites and reaction mechanisms of these DACs in Li–O2 cells were gained through density functional theory calculations. This research paves the way for replacing costly noble metal catalysts with tailored non-noble metal combinations, potentially revolutionizing Li–O2 cell technology and broadening applications in heterogeneous catalysis. [ABSTRACT FROM AUTHOR]

This study introduces a novel Sequence-to-Sequence (Seq2Seq) deep learning model for predicting lithium-ion batteries' remaining useful life. We address the challenge of extrapolating battery performance from high-rate to low-rate charging conditions, a significant limitation in previous studies. Experiments were also conducted on commercial cells using charge rates from 1C to 3C. Comparative analysis of fully connected neural networks, convolutional neural networks, and long short-term memory networks revealed their limitations in extrapolating to untrained conditions. Our Seq2Seq model overcomes these limitations, predicting charging profiles and discharge capacity for untrained, low-rate conditions using only high-rate charging data. The Seq2Seq model demonstrated superior performance with low error and high curve-fitting accuracy for 1C and 1.2C untrained data. Unlike traditional models, it predicts complete charging profiles (voltage, current, temperature) for subsequent cycles, offering a comprehensive view of battery degradation. This method significantly reduces battery life testing time while maintaining high prediction accuracy. The findings have important implications for lithium-ion battery development, potentially accelerating advancements in electric vehicle technology and energy storage. [ABSTRACT FROM AUTHOR]

Although all‐solid‐state batteries are suggested as a means to tackle the safety concerns associated with current Li‐ion batteries, there is presently a lack of comprehensive understanding regarding their thermal safety. In this context, critical factors contributing to the thermal runaway of thiophosphate solid electrolytes with charged Li1‐xNi0.8Co0.1Mn0.1O2 (NCM) under thermal and mechanical abuse conditions are demonstrated, considering parameters such as heating rate under thermal abuse conditions and the hybridization of S atom in structure. In particular, the thermal behavior of various solid electrolytes, including thiophosphates, thioantimonates, and halides, is investigated to clarify critical elements in Li6PS5Cl (LPSCl) contributing to its thermal instability when combined with charged NCM. Various ex situ analyses, along with density functional theory calculations, reveal a correlation between the hybridization of S atoms and the thermal instability of solid electrolytes, suggesting that sulfur acts as a key element triggering the thermal runaway of sulfide‐based solid electrolytes. [ABSTRACT FROM AUTHOR]

Graphite is used as an anode material in commercial lithium-ion batteries (LIBs) because of its stable cycling characteristics and high reversibility. However, during fast charging, the deposition of Li metal on the graphite electrode surface becomes problematic because the potential at which Li metal deposition occurs would be close to 0 V (vs. Li/Li+). In this study, we demonstrated an improvement in the fast-charging performance through the effective suppression of Li deposition on the anode surface during fast charging. This was achieved by introducing a metal phosphide nanodot coating layer onto artificial graphite particles. Through various analyses, including density functional theory (DFT) calculations, it was found that the cobalt phosphide(CoP) coating layer increased the concentration of PF6− anions in the inner Helmholtz layer (IHL), which in turn induced the formation of an anion-derived solid-electrolyte interface (SEI) layer. A CoP-artificial graphite (AG)/NCM 811 full cell exhibited a high capacity retention (88%) after 300 cycles, without any Li deposition. We also verified the impact of other types of metal phosphides on the fast-charging performance of LIBs. Our findings suggest that the rational design of the SEI layer is feasible through simple surface modifications that induce changes in the properties of the electric double layer. This provides a novel perspective for the design of materials suitable for the rapid charging of LIBs. [ABSTRACT FROM AUTHOR]

Lithium (Li) metal, with its unparalleled theoretical capacity and lowest electrochemical potential, is a promising anode material for rechargeable batteries. Yet, challenges such as dendrite formation, severe electrode volume change, and ongoing Li consumption impede its practical adoption. To address these challenges, a novel approach is introduced, harnessing the switchable electrical conductivity of a nanoporous current collector for Li metal anode. A vertically aligned Nickel‐catecholate (VANC) is directly grown on the copper foil as the nanoporous current collector, and the Li intercalation and de‐intercalation of VANC reversibly decrease and increase the electrical conductivity in the direction perpendicular to the electrode, respectively. The switchable conductivity induces uniform deposition and stripping of Li metal without forming dendrite and dead Li during the Li plating/stripping process and thus enables high coulombic efficiency of over 98% even after 200 cycles. This nanoporous structure with switchable conductivity will open up a new path for reliable lithium metal anode for rechargeable battery applications. [ABSTRACT FROM AUTHOR]

Lithium–sulfur batteries (LSBs) have drawn significant attention owing to their high theoretical discharge capacity and energy density. However, the dissolution of long‐chain polysulfides into the electrolyte during the charge and discharge process ("shuttle effect") results in fast capacity fading and inferior electrochemical performance. In this study, Mn2O3 with an ordered mesoporous structure (OM‐Mn2O3) was designed as a cathode host for LSBs via KIT‐6 hard templating, to effectively inhibit the polysulfide shuttle effect. OM‐Mn2O3 offers numerous pores to confine sulfur and tightly anchor the dissolved polysulfides through the combined effects of strong polar–polar interactions, polysulfides, and sulfur chain catenation. The OM‐Mn2O3/S composite electrode delivered a discharge capacity of 561 mA h g−1 after 250 cycles at 0.5 C owing to the excellent performance of OM‐Mn2O3. Furthermore, it retained a discharge capacity of 628 mA h g−1 even at a rate of 2 C, which was significantly higher than that of a pristine sulfur electrode (206 mA h g−1). These findings provide a prospective strategy for designing cathode materials for high‐performance LSBs. [ABSTRACT FROM AUTHOR]