Search

[EN] Water distribution networks (WDNs) are vital for communities, facing threats like climate change and aging infrastructure. Optimizing WDNs for energy and water savings is challenging due to their complexity. In particular, pump scheduling stands out as a fundamental tool for optimizing both resources. Metaheuristics such as evolutionary algorithms (EAs) offer promising solutions, yet encounter limitations in robustness, parameterization, and applicability to real-sized networks. The encoding of decision variables significantly influences algorithm efficiency, an aspect frequently overlooked in the literature. This study addresses this gap by comparing solution representations for a multiobjective pump scheduling problem. By assessing metrics such as execution time, convergence, and diversity, it identifies effective representations. Embracing a multiobjective approach enhances comprehension and solution robustness. Through empirical validation across case studies, this research contributes insights for the more efficient optimization of WDNs, tackling critical challenges in water and energy management. The results demonstrate significant variations in the performance of different solution representations used in the literature. In conclusion, this study not only provides perspectives on effective pump scheduling strategies but also aims to guide future researchers in selecting the most suitable representation for optimization problems.

[EN] Pumping station (PS) designs in water networks basically contemplate technical and economic aspects. Technical aspects could be related to the number of pumps in PS and the operational modes of PS. Meanwhile, economic aspects could be related to all the costs that intervene in a PS design, such as investment, operational and maintenance costs. In general, water network designs are usually focused on optimizing operational costs or investment costs, However, some subjective technical aspects have not been approached, such as determining the most suitable pump model, the most suitable number of pumps and the complexity of control system operation in a PS design. Therefore, the present work aims to select the most suitable pump model and determine the prior-ities that technical and economic factors could have in a PS design by a multi-criteria analysis, such as an analytic hierarchy process (AHP). The proposed work will contemplate two main criteria, and every criterion will be integrated by sub-criteria to design a PS. In this way, technical factors (number of pumps and complexity of the operating system) and economic factors (investment, operational and maintenance costs) will be considered for a PS design. The proposed methodology consists of realizing surveys to a different group of experts that determines the importance of one criterion over each other criterion in a PS design through pairwise comparisons. Finally, this methodology will provide importance weight for the criteria and sub-criteria on the PS. Besides, this work will perform a rating of the considered alternatives of pump models in every case study, evaluating quantitatively every alternative with every criterion in the PS design. The main objective of this work will select the most adequate pump model according to the obtained rating, considering technical and economic aspects in every case study.

[EN] A problem for drainage systems managers is the increase in extreme rain events that are increasing in various parts of the world. Their occurrence produces hydraulic overload in the drainage system and consequently floods. Adapting the existing infrastructure to be able to receive extreme rains without generating consequences for cities' inhabitants has become a necessity. This research shows a new way to improve drainage systems with minimal investment costs, using for this purpose a novel methodology that considers the inclusion of hydraulic control elements in the network, the installation of storm tanks and the replacement of pipes. The presented methodology uses the Storm Water Management Model for the hydraulic analysis of the network and a modified Genetic Algorithm to optimize the network. In this algorithm, called the Pseudo-Genetic Algorithm, the coding of the chromosomes is integral and has been used in previous studies of hydraulic optimization. This work evaluates the cost of the required infrastructure and the damage caused by floods to find the optimal solution. The main conclusion of this study is that the inclusion of hydraulic controls can reduce the cost of network rehabilitation and decrease flood levels.

[EN] The control systems point to bring the pumping curve close to the set-point curve. That concept is essential for proper design of a pumping station. An adequate design is not only focused to select the total number of the pumps and select the type of control to use (flow or pressure), but also is im-portant to determine the optimal number of Fixed Speed Pumps (FSP) pumps and Variable Speed Pumps (VSP) pumps for each flow rate. This work will discuss the most common methods proce-dures for control systems on a design of pumping stations with a methodology that it is going to be proposed. This methodology consists on expressing the characteristics of the pumping curve and the set-point curve in a dimensionless form so that the methodology be standardized for any pump model and set-point curve. These formulations allow us to discuss how the characteristic of a pump and the set-point curve of the network influence to determine the optimal number of FSPs and VSPs in energy terms. In general, the objective of this work is to determine the most suitable total number of pumps in a pumping station design and determine the optimal pumping configuration in every flow rate, so the consumed energy be the minimum. Also, this methodology will develop an ex-pression to estimate the performance of a frequency inverter when a VSP operates at different ro-tational speeds. This work will be applied to different study cases and the obtained results allow us to question several usual procedures for pumping control system. In general, it can be concluded that the number of pumps of a pumping system cannot be inferred in a simple form without a deep analysis of a control system.

[EN] Filling and emptying processes are common maneuvers while operating, controlling and managing water pipeline systems. Currently, these operations are executed following recommendations from technical manuals and pipe manufacturers; however, these recommendations have a lack of understanding about the behavior of these processes. The application of mathematical models considering transient flows with entrapped air pockets is necessary because a rapid filling operation can cause pressure surges due to air pocket compressions, while an uncontrolled emptying operation can generate troughs of sub-atmospheric pressure caused by air pocket expansion. Depending on pipe and installation conditions, either situation can produce a rupture of pipe systems. Recently, reliable mathematical models have been developed by different researchers. This paper reviews and compares various mathematical models to simulate these processes. Water columns can be analyzed using a rigid water column model, an elastic water model, or 2D/3D CFD models; air-water interfaces using a piston-flow model or more complex models; air pockets through a polytropic model; and air valves using an isentropic nozzle flow or similar approaches. This work can be used as a starting point for planning filling and emptying operations in pressurized pipelines. Uncertainties of mathematical models of two-phases flow concerning to a non-variable friction factor, a polytropic coefficient, an air pocket sizes and an air valve behavior are identified.

[EN] Emptying pipelines can be critical in many water distribution networks because subatmospheric pressure troughs could cause considerable damage to the system due to the expansion of entrapped air. Researchers have given relatively little attention to emptying processes compared to filling processes. The intricacy of computations of this phenomenon makes it difficult to predict the behaviour during emptying, and there are only a few reliable models in the literature. In this work, a computational model for simulating the transient phenomena in single pipes is proposed, and was validated using experimental results. The proposed model is based on a rigid column to analyse water movement, the air¿water interface, and air pocket equations. Two practical cases were used to validate the model: (1) a single pipe with the upstream end closed, and (2) a single pipe with an air valve installed on the upstream end. The results show how the model accurately predicts the experimental data, including the pressure oscillation patterns and subatmospheric pressure troughs.

[EN] Efficient design and management of water distribution networks is critical for conservation of water resources and minimization of both energy requirements and maintenance costs. Several computational routines have been proposed for the optimization of operational parameters that govern such networks. In particular, multi-objective evolutionary algorithms have proven to be useful both properly describing a network and optimizing its performance. Despite these computational advances, practical implementation of multi-objective optimization algorithms for water networks is an abstruse subject for researchers and engineers, particularly since efficient coupling between multi-objective algorithms and the hydraulic network model is required. Further, even if the coupling is successfully implemented, selecting the proper set of multi-objective algorithms for a given network, and addressing the quality of the obtained results (i.e., the approximate Pareto frontier) introduces additional complexities that further hinder the practical application of these algorithms. Here, we present an open-source project that couples the EPANET hydraulic network model with the jMetal framework for multi-objective optimization, allowing flexible implementation and comparison of different metaheuristic optimization algorithms through statistical quality assessment. Advantages of this project are discussed by comparing the performance of different multi-objective algorithms (i.e., NSGA-II, SPEA2, SMPSO) on case study water pump networks available in the literature

[EN] The analysis of transient flow is necessary to design adequate protection systems that support the oscillations of pressure produced in the operation of motor elements and regulation. Air valves are generally used in pressurized water pipes to manage the air inside them. Under certain circumstances, they can be used as an indirect control mechanism of the hydraulic transient. Unfortunately, one of the major limitations is the reliability of information provided by manufacturers and vendors, which is why experimental trials are usually used to characterize such devices. The realization of these tests is not simple since they require an enormous volume of previously stored air to be used in such experiments. Additionally, the costs are expensive. Consequently, it is necessary to develop models that represent the behaviour of these devices. Although computational fluid dynamics (CFD) techniques cannot completely replace measurements, the amount of experimentation and the overall cost can be reduced significantly. This work approaches the characterization of air valves using CFD techniques, including some experimental tests to calibrate and validate the results. A mesh convergence analysis was made. The results show how the CFD models are an efficient alternative to represent the behavior of air valves during the entry and exit of air to the system, implying a better knowledge of the system to improve it.

[EN] The problem presented in this edition of the Battle of the Water Networks is to define district metering areas (DMAs) in a large network. The problem is addressed in two phases. First, the complexity of the network is simplified by dividing it into three operational areas. Second, an optimization algorithm defines DMAs, looking for the best feasible solution. A preliminary simulation of the network is made. From this, engineering judgment allows for defining an initial set of elements suitable to change. In the second stage, a heuristic algorithm is used to search for the best DMA definition by selecting the locations and settings of the pressure-reducing valves and isolation valves. The network is then divided into two categories: the main pipes and the distribution pipes. Only the distribution pipes can be closed. With these restrictions and those described in the problem, the algorithm looks for the best DMA definition based on both the pressure and demand distribution among all the DMAs.

[EN] The optimal sizing in water distribution networks (WDN) is of great interest because it allows the selection of alternative economical solutions that ensure design requirements at nodes (demands and pressure) and at lines (velocities). Among all the available design methodologies, this work analyzes those based on evolutionary algorithms (EAs). EAs are a combination of deterministic and random approaches, and the performance of the algorithm depends on the searching process. Each EA features specific parameters, and a proper calibration helps to reduce the randomness factor and improves the effectiveness of the search for minima. More specifically, the only common parameter to all techniques is the initial size of the random population (P). It is well known that population size should be large enough to guarantee the diversity of solutions and must grow with the number of decision variables. However, the larger the population size, the slower the convergence process. This work attempts to determine the population size that yields better solutions in less time. In order to get that, the work applies a method based on the concept of efficiency (E) of an algorithm. This efficiency relates the quality of the obtained solution with the computational effort that every EA requires to find the final design solution. This ratio E also represents an objective indicator to compare the performance of different algorithms applied to WDN optimization. The proposed methodology is applied to the pipe-sizing problem of three medium-sized benchmark networks, such as Hanoi, New York Tunnel and GoYang networks. Thus, from the currently available algorithms, this work includes evolutionary methodologies based on a Pseudo-Genetic Algorithm (PGA), Particle Swarm Optimization (PSO) and Harmony Search (HS). First, the different algorithm parameters for each network are calibrated. The values used for every EA are those that have been calculated in previous works. Secondly, specific par

[EN] This paper presents a methodology for optimizing the operations of water distribution networks. The methodology combines the use of best management practices with a pseudogenetic algorithm, and has been applied to solve the problem of the battle of background leakage assessment for water networks. This problem involves more than 70,000 decision variables. To reduce this number, the problem was divided into three steps. First, a preliminary analysis was performed to define criteria for the replacement of pipes and pumps with a definition of potential subareas. Then, an optimization model was used to determine the pump schedule and pipe replacement. Finally, fine adjustments were performed including pump replacement, control pressure valve usage, and valve-setting definition. The main conclusion derived from this work is that a proper combination of optimization techniques and manual adjustments based on the use of engineering judgment is suitable to solve generic problems in water supply networks.

[EN] The Battle of the Water Networks II (BWN-II) is the latest of a series of competitions related to the design and operation of water distribution systems (WDSs) undertaken within the Water Distribution Systems Analysis (WDSA) Symposium series. The BWN-II problem specification involved a broadly defined design and operation problem for an existing network that has to be upgraded for increased future demands, and the addition of a new development area. The design decisions involved addition of new and parallel pipes, storage, operational controls for pumps and valves, and sizing of backup power supply. Design criteria involved hydraulic, water quality, reliability, and environmental performance measures. Fourteen teams participated in the Battle and presented their results at the 14th Water Distribution Systems Analysis conference in Adelaide, Australia, September 2012. This paper summarizes the approaches used by the participants and the results they obtained. Given the complexity of the BWN-II problem and the innovative methods required to deal with the multiobjective, high dimensional and computationally demanding nature of the problem, this paper represents a snap-shot of state of the art methods for the design and operation of water distribution systems. A general finding of this paper is that there is benefit in using a combination of heuristic engineering experience and sophisticated optimization algorithms when tackling complex real-world water distribution system design problems.