Search

In the field of heterogeneous organic catalysis, molybdenum disulfide (MoS 2 ) is gaining increasing attention as a catalytically active material due to its low toxicity, earth abundance, and affordability. Interestingly, the catalytic properties of this metal-based material can be improved by several strategies. In this Perspective, through the analysis of some explicative examples, the main approaches used to prepare highly efficient MoS 2 -based catalysts in relevant organic reactions are summarized and critically discussed, namely: i) increment of the specific surface area, ii) generation of the metallic 1T phase, iii) introduction of vacancies, iv) preparation of nanostructured hybrids/composites, v) doping with transition metal ions, and vi) partial oxidation of MoS 2 . Finally, emerging trends in MoS 2 -based materials catalysis leading to a richer organic synthesis are presented., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

Controlling the deposition of spin-crossover (SCO) materials constitutes a crucial step for the integration of these bistable molecular systems in electronic devices. Moreover, the influence of functional surfaces, such as 2D materials, can be determinant on the properties of the deposited SCO film. In this work, ultrathin films of the SCO Hofmann-type coordination polymer [Fe(py) 2 {Pt(CN) 4 }] (py = pyridine) onto monolayers of 1T and 2H MoS 2 polytypes are grown. The resulting hybrid heterostructures are characterized by GIXRD, XAS, XPS, and EXAFS to get information on the structure and the specific interactions generated at the interface, as well as on the spin transition. The use of a layer-by-layer results in SCO/2D heterostructures, with crystalline and well-oriented [Fe(py) 2 {Pt(CN) 4 }]. Unlike with conventional Au or SiO 2 substrates, no intermediate self-assembled monolayer is required, thanks to the surface S atoms. Furthermore, it is observed that the higher presence of Fe 3+ in the 2H heterostructures hinders an effective spin transition for [Fe(py) 2 {Pt(CN) 4 }] films thinner than 8 nm. Remarkably, when using 1T MoS 2 , this transition is preserved in films as thin as 4 nm, due to the reducing character of this metallic substrate. These results highlight the active role that 2D materials play as substrates in hybrid molecular/2D heterostructures., (© 2023 The Authors. Small published by Wiley-VCH GmbH.)

2H-MoS 2 is an appealing semiconductor because of its Earth-abundant nature, cheapness, and low toxicity. This material has shown promising catalytic activity for various energy-related processes, but its use in catalysis for C-C bond forming reactions towards useful organic compounds is still largely unexplored. The lack of examples in organic synthesis is mainly due to the intrinsic difficulties of using bulk 2H-MoS 2 (e. g., low surface area), which implies the reliance on high catalytic loadings for obtaining acceptable yields. This makes the optimization process more expensive and tedious. Here, we report the development of a 2H-MoS 2 -mediated synthesis of valuable bis(indolyl)methane derivatives, using indoles and benzaldehydes as starting materials. Exploiting the Design of Experiments (DoE) method, we identified the critical parameters affecting the catalytic performance of commercial 2H-MoS 2 powder and optimized the reaction conditions. Lastly, we demonstrated that the catalytic system has versatility and good tolerance towards functional group variations of the reagents., (© 2023 The Authors. ChemSusChem published by Wiley-VCH GmbH.)

Transition metal chalcogenophosphates of general formula MPX 3 have attracted recent interest in the field of 2D materials due to the possibility of tuning their properties upon reaching the 2D limit. Several works address this challenge by dry mechanical exfoliation. However, only a few of them use a scalable approach. In this work, we apply a general chemical protocol to exfoliate MnPS 3 . The method employs in the first step chemical intercalation and liquid phase exfoliation and in the second step the addition of molecules used as capping agents on the inorganic layers. Therefore, molecules of different nature prompt the quality of the exfoliated material and its stabilization in an aqueous solution, opening the possibility of using these functionalized layers in several fields. Here we illustrate this possibility in electrochemistry. Thus, we show that when polyethylenimine is used as the capping agent, it is possible to reach a compromise between the stability of high quality MnPS 3 flakes in aqueous suspension and their optimum performance as an electrocatalytic system for HER activity.

In the past few years, the effect of strain on the optical and electronic properties of MoS 2 layers has attracted particular attention as it can improve the performance of optoelectronic and spintronic devices. Although several approaches have been explored, strain is typically externally applied on the two-dimensional material. In this work, we describe the preparation of a reversible 'self-strainable' system in which the strain is generated at the molecular level by one component of a MoS 2 -based composite material. Spin-crossover nanoparticles were covalently grafted onto functionalized layers of semiconducting MoS 2 to form a hybrid heterostructure. Their ability to switch between two spin states on applying an external stimulus (light irradiation or temperature change) serves to generate strain over the MoS 2 layer. A volume change accompanies this spin crossover, and the created strain induces a substantial and reversible change of the electrical and optical properties of the heterostructure., (© 2021. The Author(s), under exclusive licence to Springer Nature Limited.)

We present the covalent coating of chemically exfoliated molybdenum disulfide (MoS 2 ) based on the polymerization of functional acryl molecules. The method relies on the efficient diazonium anchoring reaction to provoke the in situ radical polymerization and covalent adhesion of functional coatings. In particular, we successfully implement hydrophobicity on the exfoliated MoS 2 in a direct, fast, and quantitative synthetic approach. The covalent functionalization is proved by multiple techniques including X-ray photoelectron spectroscopy and TGA-MS. This approach represents a simple and general protocol to reach dense and homogeneous functional coatings on 2D materials.

The preparation of 2D stacked layers combining flakes of different nature gives rise to countless numbers of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides, WS 2 /MoS 2 , has awakened great interest owing to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here, a suspension of negatively charged MoS 2 flakes is mixed with a methanolic solution of a cationic W 3 S 4 -core cluster, giving rise to a homogeneous distribution of the clusters over the layers. In a second step, a calcination of this molecular/2D heterostructure under N 2 leads to the formation of clean WS 2 /MoS 2 heterostructures, where the photoluminescence of both counterparts is quenched, proving an efficient interlayer coupling. Thus, this chemical method combines the advantages of a solution approach (simple, scalable, and low-cost) with the good quality interfaces reached by using more complicated traditional physical methods., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)