80 results on '"Morici L."'
Search Results
2. Frequency response analysis of a toroidal field coil of the divertor tokamak test facility
- Author
-
Messina, G., Lopes, R.C., Zito, P., Morici, L., Di Zenobio, A., and Ramogida, G.
- Published
- 2023
- Full Text
- View/download PDF
3. Superconducting Cables Characterization with an electrical method
- Author
-
Morici, L., De Bella, E. Tamburo, and Messina, G.
- Subjects
Condensed Matter - Superconductivity - Abstract
AC losses in High Temperature Superconductor tapes (HTS) are an important design parameter for large scale power applications. The electrical method is often used for losses measurements on SC tapes and, when the results are to be compared to computed estimations, simple theoretical models like the Norris Brandt are typically used. Electromagnetic dynamic effects are not usually taken into account by the simpler models, but their presence may corrupt the measured data. In this paper, a preliminary study on a conventional copper bar sample has been done to evaluate the effect of the skin currents on the specimen losses measures obtained from the electrical method. The measurement procedure has afterward been applied to a SC YBCO tape (Superpower SCS4050AP), obtaining circuit configuration dependent results. Because the SC losses must obviously be measurement circuit independent, a systematic error due to the skin currents must be playing a role. The skin current induced error is always there and, in order to apply the electrical method for losses estimation, the only possibility is its minimization. The best choice for the measurement circuit to be adopted, in order to minimize the skin current undesired contribution, will finally be proposed., Comment: 12 pages, 11 figures
- Published
- 2018
4. The DEMO magnet system – Status and future challenges
- Author
-
Corato, V., Vorpahl, C., Sedlak, K., Anvar, V.A., Bennet, J., Biancolini, M.E., Bonne, F., Bonifetto, R., Boso, D.P., Brighenti, A., Bruzzone, P., Celentano, G., della Corte, A., De Marzi, G., D'Auria, V., Demattè, F., Dembkowska, A., Dicuonzo, O., Zignani, C. Fiamozzi, Fietz, W.H., Frittitta, C., Giannini, L., Giorgetti, F., Guarino, R., Heller, R., Hoa, C., Huguet, M., Jiolat, G., Kumar, M., Lacroix, B., Lewandowska, M., Misiara, N., Morici, L., Muzzi, L., Nickel, D.S., Nicollet, S., Nijhuis, A., Nunio, F., Portafaix, C., Sarasola, X., Savoldi, L., Tiseanu, I., Tomassetti, G., Torre, A., Turtù, S., Uglietti, D., Vallcorba, R., Weiss, K.-P., Wesche, R., Wolf, M.J., Yagotintsev, K., Zani, L., Zanino, R., and Zappatore, A.
- Published
- 2022
- Full Text
- View/download PDF
5. Progress in the design of the superconducting magnets for the EU DEMO
- Author
-
Corato, V., Bagni, T., Biancolini, M.E., Bonifetto, R., Bruzzone, P., Bykovsky, N., Ciazynski, D., Coleman, M., della Corte, A., Dembkowska, A., Di Zenobio, A., Eisterer, M., Fietz, W.H., Fischer, D.X., Gaio, E., Giannini, L., Giorgetti, F., Heller, R., Ivashov, I., Lacroix, B., Lewandowska, M., Maistrello, A., Morici, L., Muzzi, L., Nijhuis, A., Nunio, F., Panin, A., Sarasola, X., Savoldi, L., Sedlak, K., Stepanov, B., Tomassetti, G., Torre, A., Turtù, S., Uglietti, D., Vallcorba, R., Weiss, K.-P., Wesche, R., Wolf, M.J., Yagotintsev, K., Zani, L., and Zanino, R.
- Published
- 2018
- Full Text
- View/download PDF
6. Mucosal Vaccines for Biodefense
- Author
-
Mantis, N. J., Morici, L. A., Roy, C. J., and Kozlowski, Pamela A., editor
- Published
- 2012
- Full Text
- View/download PDF
7. Primary Quench Detection Analysis for the EU-DEMO Toroidal Field Coils
- Author
-
Morici, L., Messina, G., and De Marzi, G.
- Abstract
To protect the Toroidal Field Coils (TFC) of the EU DEMO tokamak, in case it will be realized with low temperature superconducting (LTS) materials, a reliable and fast quench detection system (QDS) is required. Although these TFC coils are operated in static mode, voltages across their winding pack (WP) will be generated during machine operation due to the presence of dynamic magnetic fields. Two sources of magnetic coupling, responsible for noisy signals on the quench detection circuitry in a Fast Plasma Disruption scenario, are here considered and analyzed. Due to the high electromagnetic noise environment, the co-wound (CW) technology must be adopted for the quench sensors and an aligned and twisted layout (CWA&T) is necessary due to the magnetic interaction with the superconductor (SC) strand helicity. The poloidal component of the plasma current is responsible for a noisy signal on the CW and a strategy for signal compensation will be suggested and the contribution evaluated numerically. The signal induced on a SC cable due to the helicity can be compensated adopting a CWA&T configuration. The twist pitch length (TP) of the CWA&T is a critical parameter for a proper noise compensation. Since it is challenging to obtain a reliable TP length from a numerical simulation, we here propose an experimental approach to assess the proper TP length. There is not a constraint on the TP length from the poloidal plasma current induced signal and we can conclude that a single TP, optimized for helicity compensation, will be sufficient.
- Published
- 2024
- Full Text
- View/download PDF
8. Space Flight Alters Bacterial Gene Expression and Virulence and Reveals a Role for Global Regulator Hfq
- Author
-
Wilson, J. W., Ott, C. M., zu Bentrup, K. Höner, Ramamurthy, R., Quick, L., Porwollik, S., Cheng, P., McClelland, M., Tsaprailis, G., Radabaugh, T., Hunt, A., Fernandez, D., Richter, E., Shah, M., Kilcoyne, M., Joshi, L., Nelman-Gonzalez, M., Hing, S., Parra, M., Dumars, P., Norwood, K., Bober, R., Devich, J., Ruggles, A., Goulart, C., Rupert, M., Stodieck, L., Stafford, P., Catella, L., Schurr, M. J., Buchanan, K., Morici, L., McCracken, J., Allen, P., Baker-Coleman, C., Hammond, T., Vogel, J., Nelson, R., Pierson, D. L., Stefanyshyn-Piper, H. M., and Nickerson, C. A.
- Published
- 2007
- Full Text
- View/download PDF
9. Space flight alters bacterial gene expression and virulence and reveals a role for global regulator Hfq
- Author
-
Wilsona, J.W., Ott, C.M., zu Bentrup, K. Honer, Ramamurthy, R., Quick, L., Porwollik, S., Cheng, P., McClelland, M., Tsaprailis, G., Radabaugh, T., Hunt, A., Fernandez, D., Richter, E., Shah, M., Kilcoyne, M., Joshi, L., Nelman-Gonzalez, M., Hing, S., Parra, M., Dumars, P., Norwood, K., Bober, R., Devich, J., Ruggles, A., Goulart, C., Rupert, M., Stodieck, L., Stafford, P., Catella, L., Schurr, M.J., Buchanan, K., Morici, L., McCracken, J., Allen, P., Baker-Coleman, C., Hammond, T., Vogel, J., Nelson, R., Pierson, D.L., Stefanyshyn-Piper, H.M., and Nickerson, C.A.
- Subjects
Space flight -- Influence ,Gene expression -- Research ,Virulence (Microbiology) -- Evaluation ,Microgravity -- Influence ,Salmonella -- Genetic aspects ,Science and technology - Abstract
A comprehensive analysis of both the molecular genetic and phenotypic responses of any organism to the space flight environment has never been accomplished because of significant technological and logistical hurdles. Moreover, the effects of space flight on microbial pathogenicity and associated infectious disease risks have not been studied. The bacterial pathogen Salmonella typhimurium was grown aboard Space Shuttle mission STS-115 and compared with identical ground control cultures. Global microarray and proteomic analyses revealed that 167 transcripts and 73 proteins changed expression with the conserved RNA-binding protein Hfq identified as a likely global regulator involved in the response to this environment. Hfq involvement was confirmed with a ground-based microgravity culture model. Space flight samples exhibited enhanced virulence in a murine infection model and extracellular matrix accumulation consistent with a biofilm. Strategies to target Hfq and related regulators could potentially decrease infectious disease risks during space flight missions and provide novel therapeutic options on Earth. microgravity | Space Shuttle | low shear modeled microgravity | rotating wall vessel | Salmonella
- Published
- 2007
10. Mucosal Vaccines for Biodefense
- Author
-
Mantis, N. J., primary, Morici, L. A., additional, and Roy, C. J., additional
- Published
- 2011
- Full Text
- View/download PDF
11. Effect Of Spaceflight On Microbial Gene Expression And Virulence: Preliminary Results From Microbe Payload Flown On-Board STS-115
- Author
-
Wilson, J. W, HonerzuBentrup, K, Schurr, M. J, Buchanan, K, Morici, L, Hammond, T, Allen, P, Baker, C, Ott, C. M, Nelman-Gonzalez M, Schurr, J. R, Pierson, D. L, Stodieck, L, Hing, S, Parra, M, Dumars, P, Stefanyshyn-Piper, H. M, and Nickerson, C. A
- Subjects
Aerospace Medicine - Abstract
Human presence in space, whether permanent or temporary, is accompanied by the presence of microbes. However, the extent of microbial changes in response to spaceflight conditions and the corresponding changes to infectious disease risk is unclear. Previous studies have indicated that spaceflight weakens the immune system in humans and animals. In addition, preflight and in-flight monitoring of the International Space Station (ISS) and other spacecraft indicates the presence of opportunistic pathogens and the potential of obligate pathogens. Altered antibiotic resistance of microbes in flight has also been shown. As astronauts and cosmonauts live for longer periods in a closed environment, especially one using recycled water and air, there is an increased risk to crewmembers of infectious disease events occurring in-flight. Therefore, understanding how the space environment affects microorganisms and their disease potential is critically important for spaceflight missions and requires further study. The goal of this flight experiment, operationally called MICROBE, is to utilize three model microbial pathogens, Salmonella typhimurium, Pseudomonas aeruginosa, and Candida albicans to examine the global effects of spaceflight on microbial gene expression and virulence attributes. Specifically, the aims are (1) to perform microarray-mediated gene expression profiling of S. typhimurium, P. aeruginosa, and C. albicans, in response to spaceflight in comparison to ground controls and (2) to determine the effect of spaceflight on the virulence potential of these microorganisms immediately following their return from spaceflight using murine models. The model microorganisms were selected as they have been isolated from preflight or in-flight monitoring, represent different degrees of pathogenic behavior, are well characterized, and have sequenced genomes with available microarrays. In particular, extensive studies of S. typhimurium by the Principal Investigator, Dr. Nickerson, using ground-based analog systems demonstrate important changes in the genotypic, phenotypic, and virulence characteristics of this pathogen resulting from exposure to a flight-like environment (i.e. modeled microgravity).
- Published
- 2007
12. DTT - Divertor Tokamak Test facility - Interim Design Report
- Author
-
Affinito, L., Almaviva, S., Anemona, A., Angelone, M., Apicella, M. L., Appi, A., Apruzzese, G., Artaserse, G., Barone, G., Baruzzo, M., Batistoni, P., Bombarda, F., Boncagni, L., Buratti, P., Caiffi, B., Caneve, L., Caponero, M., Cardinali, A., Ceccuzzi, S., Centioli, C., Claps, G., Cocilovo, V., Colangeli, A., Colao, F., Contessa, G. M., Corato, V., Cordella, F., Crisanti, F., Cucchiaro, A., D’arcangelo, O., Della Corte, A., Luca, R., Di Pace, L., Di Zenobio, A., Dose, G., Fiamozzi Zignani, C., Flammini, D., Fonnesu, N., Frattolillo, A., Gabellieri, L., Galatola, G., Giannini, L., Giovannozzi, E., Grieco, M. T., Guardati, M., Iafrati, M., Iovinella, I., Lampasi, A., Lanchi, C., Lazic, V., Liuzza, D., Maddaluno, G., Magagnino, S., Mancini, A., Marocco, D., Martelli, E., Mazzitelli, G., Mazzotta, C., Messina, G., Monti, C., Morici, L., Moro, F., Muzzi, L., Pacella, D., Pillon, M., Piron, C., Pizzuto, A., Pollastrone, F., Polli, G. M., Pospodarczyk, M., Ramogida, G., Ravera, G. L., Righetti, R., Roccella, S., Romanelli, G., Romano, A., Romano, R., Rydzy, A., Sandri, S., Starace, F., Tuccillo, A. A., Tudisco, O., Turtù, S., Vellucci, M., Villari, R., Viola, B., Vitale, V., Vlad, G., Zerbini, M., Zito, P., Zoboli, L., Zonca, F., Alessi, E., Baiocchi, B., Bin, W., Bruschi, A., Causa, F., Cremona, A., Fanale, F., Farina, D., Figini, L., Garavaglia, S., Granucci, G., Lontano, M., Moro, A., Muraro, A., Nowak, S., Perelli, E., Ricci, D., Schmuck, S., Sozzi, C., Tardocchi, M., Uccello, A., William, B., Albanese, R., Ambrosino, R., Ariola, M., Castaldo, A., Coccorese, D., Coccorese, V., Magistris, M., Tommasi, G., Di Gironimo, G., Fresa, R., Grazioso, S., Loschiavo, V. P., Martone, R., Marzullo, D., Mattei, M., Mele, A., Mozzillo, R., Orsitto, F. P., Pironti, A., Rubinacci, G., Tarallo, A., Ventre, S., Villone, F., ROBERTO BONIFETTO, Maggiora, Riccardo, DANIELE MILANESIO, Giuseppe Francesco Nallo, Laura Savoldi, Fabio SUBBA, Zanino, Roberto, ANDREA ZAPPATORE, Agostinetti, P., Agostini, M., Barbisan, M., Bolzonella, T., Carraro, L., Castaldo, C., Cavazzana, R., Masi, G., Fassina, A., Ferro, A., Franz, P., Giacomelli, L., Giudicotti, L., Gnesotto, F., Gobbin, M., Innocente, P., Luchetta, A., Manduchi, G., Marrelli, L., Martin, P., Martines, E., Moressa, M., Pasqualotto, R., Peruzzo, S., Piron, L., Puiatti, M. E., Scarin, P., Sonato, P., Spizzo, G., Spolaore, M., Terranova, D., Valisa, M., Vallar, M., Vianello, N., Vincenzi, P., Zaniol, B., Zuin, M., Calabrò, G., Lombroni, R., Minucci, S., Gorini, G., Nocente, M., Santis, A., Maggiacomo, L., Mariano, G., Osipenko, M., Ripani, M., Murtas, F., and Luis, R.
- Subjects
Nuclear fusion ,Nuclear fusion, Divertor Tokamak Test ,Divertor Tokamak Test - Published
- 2019
13. Advance in the conceptual design of the European DEMO magnet system
- Author
-
Sedlak, K, primary, Anvar, V A, additional, Bagrets, N, additional, Biancolini, M E, additional, Bonifetto, R, additional, Bonne, F, additional, Boso, D, additional, Brighenti, A, additional, Bruzzone, P, additional, Celentano, G, additional, Chiappa, A, additional, D’Auria, V, additional, Dan, M, additional, Decool, P, additional, della Corte, A, additional, Dembkowska, A, additional, Dicuonzo, O, additional, Duran, I, additional, Eisterer, M, additional, Ferro, A, additional, Fiamozzi Zignani, C, additional, Fietz, W H, additional, Frittitta, C, additional, Gaio, E, additional, Giannini, L, additional, Giorgetti, F, additional, Gömöry, F, additional, Granados, X, additional, Guarino, R, additional, Heller, R, additional, Hoa, C, additional, Ivashov, I, additional, Jiolat, G, additional, Jirsa, M, additional, Jose, B, additional, Kembleton, R, additional, Kumar, M, additional, Lacroix, B, additional, Le Coz, Q, additional, Lewandowska, M, additional, Maistrello, A, additional, Misiara, N, additional, Morici, L, additional, Muzzi, L, additional, Nicollet, S, additional, Nijhuis, A, additional, Nunio, F, additional, Portafaix, C, additional, Romanelli, G, additional, Sarasola, X, additional, Savoldi, L, additional, Stepanov, B, additional, Tiseanu, I, additional, Tomassetti, G, additional, Torre, A, additional, Turtù, S, additional, Uglietti, D, additional, Vallcorba, R, additional, Viererbl, L, additional, Vojenciak, M, additional, Vorpahl, C, additional, Weiss, K-P, additional, Wesche, R, additional, Wolf, M J, additional, Zani, L, additional, Zanino, R, additional, Zappatore, A, additional, and Corato, V, additional
- Published
- 2020
- Full Text
- View/download PDF
14. Novel multi-component vaccine approaches for Burkholderia pseudomallei
- Author
-
Morici, L, primary, Torres, A G, additional, and Titball, R W, additional
- Published
- 2019
- Full Text
- View/download PDF
15. Magnetic characterization of [formula omitted]
- Author
-
Gaudio, S., de Marzi, G., Angrisani Armenio, A., Celentano, G., Morici, L., della Corte, A., Gambardella, U., Jiang, J., Hellstrom, E.E., Weiss, J.D., and Larbalestier, D.C.
- Published
- 2010
- Full Text
- View/download PDF
16. REBCO Coils System for Axial Flux Electrical Machines Application: Manufacturing and Testing
- Author
-
Messina, G., primary, Morici, L., additional, Celentano, G., additional, Marchetti, M., additional, and Della Corte, A., additional
- Published
- 2016
- Full Text
- View/download PDF
17. AC Loss Measurements of a Trapezoidal Shaped HTS Coil Using an Electrical Method
- Author
-
Messina, G., primary, Morici, L., additional, Besi Vetrella, U., additional, Celentano, G., additional, Marchetti, M., additional, Viola, R., additional, and Sabatino, P., additional
- Published
- 2014
- Full Text
- View/download PDF
18. AC Transport Current Losses in HTS Coils for Axial Flux Electrical Machines Applications
- Author
-
Messina, G., primary, Morici, L., additional, Besi Vetrella, U., additional, Celentano, G., additional, Marchetti, M., additional, Sabatino, P., additional, and Viola, R., additional
- Published
- 2014
- Full Text
- View/download PDF
19. HTS Coils Fabrication From Commercial 2G YBCO Tapes: Measurements and Simulation
- Author
-
Besi Vetrella, U., primary, Celentano, G., additional, Marchetti, M., additional, Messina, G., additional, Morici, L., additional, Sabatino, P., additional, Viola, R., additional, and della Corte, A., additional
- Published
- 2014
- Full Text
- View/download PDF
20. Modeling and measurements of circular and trapezoidal shape HTS coils for electrical machines applications
- Author
-
Messina, G, primary, Morici, L, additional, Vetrella, U Besi, additional, Celentano, G, additional, Marchetti, M, additional, Viola, R, additional, and Sabatino, P, additional
- Published
- 2014
- Full Text
- View/download PDF
21. Percorsi personali e di reclusione
- Author
-
Corsi, Giancarlo, La Palombara, A., Besio, C., and Morici, L.
- Subjects
Detenzione ,criminalità ,diritto - Published
- 2002
22. Strain sensitivity and superconducting properties of Nb3Sn from first principles calculations
- Author
-
De Marzi, G, primary, Morici, L, additional, Muzzi, L, additional, della Corte, A, additional, and Buongiorno Nardelli, M, additional
- Published
- 2013
- Full Text
- View/download PDF
23. A New European Production Line for CIC Conductors
- Author
-
della Corte, Antonio, primary, Affinito, L., additional, Besi Vetrella, U., additional, Chiarelli, S., additional, Di Zenobio, A., additional, Morici, L., additional, Muzzi, L., additional, Polli, G. M., additional, Reccia, L., additional, Turtu, S., additional, Bragagni, A., additional, Scoccini, G., additional, Seri, M., additional, Valori, D., additional, Quagliata, F., additional, Roveta, G., additional, and Roveta, M., additional
- Published
- 2012
- Full Text
- View/download PDF
24. Magnetic characterization of Ba(Fe0.9Co0.1)2As2
- Author
-
Gaudio, S., primary, de Marzi, G., additional, Angrisani Armenio, A., additional, Celentano, G., additional, Morici, L., additional, della Corte, A., additional, Gambardella, U., additional, Jiang, J., additional, Hellstrom, E.E., additional, Weiss, J.D., additional, and Larbalestier, D.C., additional
- Published
- 2010
- Full Text
- View/download PDF
25. Coherent laser sensor for robotic applications
- Author
-
Bartolini, Luciano, primary, Bordone, Andrea, additional, Businaro, L., additional, Ferri De Collibus, Mario, additional, Fornetti, Giorgio G., additional, Morici, L., additional, and Poggi, Claudio, additional
- Published
- 1998
- Full Text
- View/download PDF
26. Strain sensitivity and superconducting properties of Nb3Sn from first principles calculations.
- Author
-
De Marzi, G., Morici, L., Muzzi, L., della Corte, A., and Nardelli, M. Buongiorno
- Published
- 2013
- Full Text
- View/download PDF
27. Coherent laser sensor for robotic applications.
- Author
-
Bartolini, Luciano, Bordone, Andrea, Businaro, L., Ferri De Collibus, Mario, Fornetti, Giorgio G., Morici, L., and Poggi, Claudio
- Published
- 1998
- Full Text
- View/download PDF
28. Hyperlipidemia and reproductive failure in captive-reared alligators: vitamin E, vitamin A, plasma lipids, fatty acids, and steroid hormones
- Author
-
Lance, V. A., Morici, L. A., Elsey, R. M., Lund, E. D., and Place, A. R.
- Published
- 2001
- Full Text
- View/download PDF
29. Eddy currents active screening in permanent magnet NMR scanner
- Author
-
Morici, L., Tossici, L., DE LUCA, Francesco, and Maraviglia, Bruno
- Published
- 1988
30. Spin-Rotation Interaction and relaxation in molecular solids
- Author
-
DE LUCA, Francesco, Maraviglia, Bruno, Morici, L., and Nuccetelli, C.
- Published
- 1986
31. Role of spin-rotation relaxation in solid CH4-Kr mixtures
- Author
-
de Luca, F., primary, Maraviglia, B., additional, Morici, L., additional, and Nuccetelli, C., additional
- Published
- 1985
- Full Text
- View/download PDF
32. Role of spin-rotation relaxation in solid CH 4-Kr mixtures
- Author
-
de Luca, F., Maraviglia, B., Morici, L., and Nuccetelli, C.
- Published
- 1985
- Full Text
- View/download PDF
33. Design optimization for the quench protection of DTT's superconducting toroidal field magnets
- Author
-
L. Morici, Carmelo Riccardo Lopes, Pietro Zito, Giordano Tomassetti, Guido Ala, Gaetano Zizzo, Giuseppe Messina, Chiarasole Fiamozzi Zignani, Alessandro Lampasi, Lopes C.R., Zito P., Fiamozzi Zignani C., Messina G., Morici L., Tomassetti G., Lampasi A., Ala G., Zizzo G., Lopes, C. R., Zito, P., Fiamozzi Zignani, C., Messina, G., Morici, L., Tomassetti, G., Lampasi, A., Ala, G., and Zizzo, G.
- Subjects
Linear discharge ,Tokamak ,Materials science ,Mechanical Engineering ,Nuclear engineering ,Divertor ,Quench protection ,FDU ,Superconducting magnet ,law.invention ,Settore ING-IND/33 - Sistemi Elettrici Per L'Energia ,Settore ING-IND/31 - Elettrotecnica ,Dump resistor ,Nuclear Energy and Engineering ,Physics::Plasma Physics ,law ,Electromagnetic coil ,Magnet ,Power electronics ,Superconducting magnets ,General Materials Science ,Resistor ,DTT ,Civil and Structural Engineering ,Voltage - Abstract
The paper is focused on the optimal design of Fast Discharge Unit (FDU) for the quench protection of the Toroidal Field (TF) magnets of the Divertor Tokamak Test facility (DTT), an experimental facility under construction in ENEA Frascati Research Centre (Rome, Italy). The FDU is a safety key component that protects the superconducting magnets when a quench is detected through the fast extraction of the energy stored in the magnets by adding a discharge dump resistor (DR) in the TF magnets circuit. A comparison between a fixed DR and a switched variable DR has been implemented by changing resistor parameters and by using multiple current control of the power electronics components (IGCTs). The new configuration allows to reduce the maximum voltage and the thermal stresses both for superconducting magnets and for FDUs (Fast Discharge Units), so reducing the insulation level of all TF (Toroidal Field) coil circuits, including also the power supply, reducing the hotspot temperature on the TF coils and the specific energy through them. Another advantage of the proposed configuration is the reduction of the size of all electrical devices of TF coil circuits so achieving a more effective and reliable design, also decreasing the overall costs.
- Published
- 2021
- Full Text
- View/download PDF
34. Transient Electrical Behaviour of the TF Superconducting Coils of Divertor Tokamak Test Facility During a Fast Discharge
- Author
-
Giuseppe Messina, Carmelo Riccardo Lopes, Pietro Zito, Aldo Di Zenobio, Chiarasole Fiamozzi Zignani, Alessandro Lampasi, Luigi Morici, Giuseppe Ramogida, Giordano Tomassetti, Guido Ala, Gaetano Zizzo, Messina G., Lopes C.R., Zito P., Zenobio A.D., Fiamozzi Zignani C., Lampasi A., Morici L., Ramogida G., Tomassetti G., Ala G., and Zizzo G.
- Subjects
Fast Discharge ,Circuit faults ,FDU ,Condensed Matter Physics ,Ground fault conditions ,Central Solenoid Model Coil (CSMC) ,Electronic, Optical and Magnetic Materials ,Settore ING-IND/33 - Sistemi Elettrici Per L'Energia ,Transient analysis ,Settore ING-IND/31 - Elettrotecnica ,Insulation ,Integrated circuit modeling ,Discharges (electric) ,Toroidal Field Model Coil (TFMC) ,Superconducting magnets ,Electrical and Electronic Engineering ,Voltage distribution ,Inductance ,DTT ,Electromagnetic modelling - Abstract
The paper is focused on the electromagnetic analysis of the Toroidal Field (TF) superconducting coils of the Divertor Tokamak Test facility (DTT) when electrical transients occur in the TF coils system: for example, during the operations of the Fast Discharge Units (FDUs) and considering also, the simultaneous occurrence of a fault condition. During the FDU intervention, a transient voltage excitation lasting few microseconds occurs at the TF coil terminals and it electrically stresses the insulations of TF coils itsef. To investigate the voltage distribution across, inside and between different Double Pancakes (DPs) of each TF coil, a lumped parameters circuital model has been developed and implemented in Ansys Simplorer simulation environment. This model includes both the detailed sub-model of each TF coil and FDU. The transient analyses have been carried out for two different scenarios: a reference one and a failure scenario, considering three different fault resistance values and also two different values of the resistance connecting the TF case to ground. In order to verify the correct sizing of the coil insulation and the TF case-to-ground resistance value inserted in the circuit of each TF coil, the voltages of each TF coil (terminal-to-terminal, terminal-to-ground, across of adjacent DPs and so) were computed in the time domain (in the range of milliseconds) for both scenarios. An overview of calculations and simulation results is presented and discussed, pointing out a high sensitivity of fault conditions and of overvoltage values and addressing mitigation strategies.
- Published
- 2022
35. Primary Quench Detection Analysis for DTT Central Solenoid and Poloidal Field Coils
- Author
-
L. Morici, C. Fiamozzi Zignani, G. Messina, Morici, L., Fiamozzi Zignani, C., and Messina, G.
- Subjects
signal detection ,signal to noise ratio ,Superconducting magnets ,Electrical and Electronic Engineering ,Condensed Matter Physics ,tokamak ,Electronic, Optical and Magnetic Materials - Abstract
The Central Solenoid (CS) and the Poloidal Field (PF) coils of the DTT tokamak (Divertor Tokamak Test facility, currently being built in the site of ENEA C.R. Frascati - Italy) are operated in dynamic mode and, even in normal operation, the self and mutual voltages induced across each coil are of the order of magnitude of ≈100 V. In DTT, these coils will be realized with superconducting materials and, as a consequence, a reliable and fast quench detection system is required in order to protect the magnets. Being the quench signals 4 orders of magnitude smaller than the operating voltages, the cowound (CW) technology must be adopted for the quench sensors, the only degree of freedom being among a wiring configuration merely aligned with the coil winding (CWA) or aligned and twisted to the coil winding (CWA&TW). In this study, a model of the DTT poloidal magnetic system has been developed up to the details of the single windings (layer or pancake) of the various coils. CWA sensors have also been implemented in the model. Signals coming from the magnetic system and the CWA sensors during the Single Null plasma event have been simulated and compared. The analysis has been carried out up to the level of the elementary winding of each coil, using a lumped parameters circuital model. Finally, a simple theory has been developed aimed at the estimations of the improvements coming from the CWA&TW architecture.
- Published
- 2022
36. Advance in the conceptual design of the European DEMO magnet system
- Author
-
Ilia Ivashov, B. Jose, G. Jiolat, Andrea Chiappa, S. Nicollet, Lorenzo Giannini, Roberto Bonifetto, F. Giorgetti, Pierluigi Bruzzone, A. della Corte, R. Kembleton, P. Decool, C. Portafaix, Michael Eisterer, M. Dan, Rainer Wesche, L. Morici, Louis Zani, Giordano Tomassetti, B. Lacroix, V A Anvar, N. Misiara, Christian Vorpahl, Ortensia Dicuonzo, Boris Stepanov, Luigi Muzzi, Alberto Brighenti, Vincenzo D'Auria, Michael J. Wolf, Elena Gaio, Davide Uglietti, Francois Nunio, A. Maistrello, Xabier Sarasola, Alexandre Torre, F. Bonne, Ladislav Viererbl, Arend Nijhuis, Marco Evangelos Biancolini, Reinhard Heller, C. Fiamozzi Zignani, Milos Jirsa, C. Hoa, Aleksandra Dembkowska, Fedor Gömöry, I. Duran, Andrea Zappatore, A. Ferro, Monika Lewandowska, Ion Tiseanu, Q. Le Coz, Xavier Granados, R. Vallcorba, Simonetta Turtu, Roberto Zanino, Roberto Guarino, Gherardo Romanelli, V. Corato, Kamil Sedlak, Walter H. Fietz, Michal Vojenciak, G. Celentano, Daniela P. Boso, Nadezda Bagrets, Laura Savoldi, Maneesh Kumar, C. Frittitta, K.P. Weiss, Energy, Materials and Systems, European Commission, Swiss National Science Foundation, Sedlak, K., Anvar, V. A., Bagrets, N., Biancolini, M. E., Bonifetto, R., Bonne, F., Boso, D., Brighenti, A., Bruzzone, P., Celentano, G., Chiappa, A., D'Auria, V., Dan, M., Decool, P., Della Corte, A., Dembkowska, A., Dicuonzo, O., Duran, I., Eisterer, M., Ferro, A., Fiamozzi Zignani, C., Fietz, W. H., Frittitta, C., Gaio, E., Giannini, L., Giorgetti, F., Gomory, F., Granados, X., Guarino, R., Heller, R., Hoa, C., Ivashov, I., Jiolat, G., Jirsa, M., Jose, B., Kembleton, R., Kumar, M., Lacroix, B., Le Coz, Q., Lewandowska, M., Maistrello, A., Misiara, N., Morici, L., Muzzi, L., Nicollet, S., Nijhuis, A., Nunio, F., Portafaix, C., Romanelli, G., Sarasola, X., Savoldi, L., Stepanov, B., Tiseanu, I., Tomassetti, G., Torre, A., Turtu, S., Uglietti, D., Vallcorba, R., Viererbl, L., Vojenciak, M., Vorpahl, C., Weiss, K. -P., Wesche, R., Wolf, M. J., Zani, L., Zanino, R., Zappatore, A., and Corato, V.
- Subjects
conductor ,Materials science ,Hybrid coil ,Nuclear engineering ,Superconducting magnet ,7. Clean energy ,01 natural sciences ,Conceptual design ,Superconducting magnets ,0103 physical sciences ,Materials Chemistry ,Nuclear fusion ,cable ,Electrical and Electronic Engineering ,010306 general physics ,DEMO ,nuclear fusion ,010302 applied physics ,Settore ING-IND/14 ,Metals and Alloys ,22/2 OA procedure ,Fusion power ,Condensed Matter Physics ,CICC ,superconducting magnets, CICC ,Magnetic flux ,progress ,Electromagnetic coil ,Magnet ,Ceramics and Composites ,superconducting magnets - Abstract
Sedlak, K. et al., The European DEMO, i.e. the demonstration fusion power plant designed in the framework of the Roadmap to Fusion Electricity by the EUROfusion Consortium, is approaching the end of the pre-conceptual design phase, to be accomplished with a Gate Review in 2020, in which all DEMO subsystems will be reviewed by panels of independent experts. The latest 2018 DEMO baseline has major and minor radius of 9.1 m and 2.9 m, plasma current 17.9 MA, toroidal field on the plasma axis 5.2 T, and the peak field in the toroidal-field (TF) conductor 12.0 T. The 900 ton heavy TF coil is prepared in four low-temperature-superconductor (LTS) variants, some of them differing slightly, other significantly, from the ITER TF coil design. Two variants of the CS coils are investigated—a purely LTS one resembling the ITER CS, and a hybrid coil, in which the innermost layers made of HTS allow the designers either to increase the magnetic flux, and thus the duration of the fusion pulse, or to reduce the outer radius of the CS coil. An issue presently investigated by mechanical analyzes is the fatigue load. Two variants of the poloidal field coils are being investigated. The magnet and conductor design studies are accompanied by the experimental tests on both LTS and HTS prototype samples, covering a broad range of DC and AC tests. Testing of quench behavior of the 15 kA HTS cables, with size and layout relevant for the fusion magnets and cooled by forced flow helium, is in preparation., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This work was supported in part by the Swiss National Science Foundation (SNF) under contract number 200021_179134.
- Published
- 2020
- Full Text
- View/download PDF
37. Conceptual Design and Modeling of the Toroidal Field Coils Circuit of DTT
- Author
-
Giordano Tomassetti, L. Morici, Chiarasole Fiamozzi Zignani, Pietro Zito, Guido Ala, Gaetano Zizzo, Carmelo Riccardo Lopes, Alessandro Lampasi, Giuseppe Messina, Zito, P., Tomassetti, G., Messina, G., Morici, L., Zignani, C. F., Lampasi, A., Ala, G., Zizzo, G., Lopes, C. R., Fiamozzi Zignani C., and Lopes, C.R.
- Subjects
Tokamak ,Toroid ,Power station ,Computer science ,Nuclear engineering ,Divertor ,Toroidal Field Superconducting Magnets ,Crowbar Protection ,Superconducting magnet ,Fault (power engineering) ,Converter Transformer ,01 natural sciences ,010305 fluids & plasmas ,law.invention ,Settore ING-IND/33 - Sistemi Elettrici Per L'Energia ,Settore ING-IND/31 - Elettrotecnica ,AC/DC Converter ,Conceptual design ,law ,0103 physical sciences ,010306 general physics ,Voltage - Abstract
Italian Divertor Tokamak Test (DTT) facility is part of the general European programme on the fusion research. Its specific role is to cover the gap on the power exhaust for the future DEMOstration power plant (DEMO). This tokamak will be built and installed in Italy at Frascati ENEA laboratories. The paper describes the Toroidal Field (TF) coils circuit powered by a TF power supply that feeds in series 18 toroidal superconducting magnets and the development of three software models in order to validate the adopted technical solutions in term of maximum voltage and maximum current stress on each power device/component, due to both the operating and fault conditions, and across TF coils.
- Published
- 2020
38. HTS Axial flux permanent magnets electrical machine prototype: Design and test results
- Author
-
Edoardo Tamburo De Bella, L. Morici, Giuseppe Messina, Messina, G., Tamburo De Bella, E., and Morici, L.
- Subjects
Materials science ,permanent magnets (PMs) ,Stator ,Mechanical engineering ,Synchronous electrical machines ,Condensed Matter Physics ,01 natural sciences ,Field coil ,Electronic, Optical and Magnetic Materials ,law.invention ,law ,Electromagnetic coil ,axial flux configuration ,Behn-Eschenburg equivalent model ,high temperature superconductors (HTS) ,Magnet ,0103 physical sciences ,Torque ,Electrical and Electronic Engineering ,010306 general physics ,Synchronous motor ,Air gap (plumbing) ,Armature (electrical engineering) - Abstract
A prototype of high-temperature superconductors (HTS) Axial Flux Permanent Magnets, Synchronous Machine in a single-side configuration is presented. The stator and the rotor disc have the same outer diameter D out of 316 mm and its air gap is set at 5 mm. HTS coils placed on the stator disc and permanent magnets placed on the rotor disc have been used to assemble the Y-connected ironless armature concentrated winding and the field winding, respectively. Each phase of the armature winding is composed by two coils connected in series, although the ac power loss is the key problem: This might be less important for wind turbine applications interested by low armature frequency. Preliminary tests at the liquid nitrogen temperature on the prototype in generator and motor mode at different load conditions have been conducted in our laboratories: The characteristic curves (power, torque, efficiency, etc.) at different rotational speed are reported. A proper response at 77 K has been provided by the prototype so that HTS coils can be used to assemble armature windings for low-frequency applications. The test results show that the HTS permanent magnet machines in the axial flux configuration are more compact, efficient, and light weight than their conventional counterpart.
- Published
- 2019
39. REBCO Coils System for Axial Flux Electrical Machines Application: Manufacturing and Testing
- Author
-
L. Morici, Giuseppe Messina, A. della Corte, Marcello Marchetti, G. Celentano, Della Corte, A., Marchetti, M., Morici, L., Messina, G., and Celentano, G.
- Subjects
AC losses ,Materials science ,business.product_category ,concentrated winding ,Mechanical engineering ,02 engineering and technology ,01 natural sciences ,AC losse ,law.invention ,Nuclear magnetic resonance ,Axial Flux Electrical Machine ,law ,0103 physical sciences ,Waveform ,REBCO tape ,Electrical and Electronic Engineering ,010306 general physics ,Electrical impedance ,Armature (electrical engineering) ,Electric machine ,Superconductivity ,Electromotive force ,021001 nanoscience & nanotechnology ,Condensed Matter Physics ,Electronic, Optical and Magnetic Materials ,Amplitude ,Electromagnetic coil ,0210 nano-technology ,business - Abstract
A REBCO coil system for axial flux electrical machines applications is presented. Three couples of series-connected coils have been placed on a fiberglass disc and wired in star configuration to simulate a three-phase, ironless, and superconducting armature concentrated winding. REBCO-based commercial tape has been used to wind each of the six coils in double-pancake configuration around a fiberglass trapezoidal-shaped core. DC current-voltage curve and ac transport current losses plots of each coil have been obtained at liquid nitrogen temperature. Six copper coils having the same shape and geometric parameters of REBCO coils have been also manufactured to assemble a conventional armature concentrated winding. Laboratory testing on different armature windings has been conducted at different temperatures (77 K and 300 K) to measure the impedance (amplitude and phase) value, the back electromotive forces waveform, etc. The experimental results of both configurations (conventional and superconducting) are compared to study the feasibility of a superconducting armature winding prototype of an axial flux electric machine. © 2002-2011 IEEE.
- Published
- 2016
40. Modeling and measurements of circular and trapezoidal shape HTS coils for electrical machines applications
- Author
-
R. Viola, L Morici, P. Sabatino, G. Celentano, U. Besi Vetrella, G. Messina, M. Marchetti, Viola, R., Marchetti, M., Celentano, G., Vetrella, U. B., Morici, L., and Messina, G.
- Subjects
Superconductivity ,sc (superconductors) ,History ,Engineering ,business.industry ,Ic (critical current) ,Electrical engineering ,Mechanical engineering ,HTS (High Temperature Superconductors) ,HTS 2G (second generation HTS) ,AFPM (Axial Flux Permanent Magnets) ,Dissipation ,Finite element method ,Computer Science Applications ,Education ,Power (physics) ,c (superconductors) ,Cross section (physics) ,Electromagnetic coil ,Electric current ,business ,Type-II superconductor - Abstract
Axial Flux Electrical Machines (AFEM) with good power-to-weight and diameter-to-length ratio and high efficiency are very attractive for most industrial and power applications. Investigations with both theoretical and experimental methods of ac losses are important for a reliable prediction of dissipation mechanisms in AFEM. In this paper, simulated and measured results for both critical current (Ic) and transport current losses (P loss), obtained on HTS coils, are reported. To investigate shape effects, double pancake coils with variable turns and shapes have been manufacted. Commercial grade ReBa2Cu3O7-x (Re Y or rare earths, ReBCO) tape and epoxy resin has been used for coil winding. A magneto-static 2D finite element model (FEM) for the coils cross section, and a lumped model for AC losses estimations, have been implemented. The agreement among measured and simulated results are satisfactory. © Published under licence by IOP Publishing Ltd.
- Published
- 2014
41. Strain sensitivity and superconducting properties of Nb3Sn from first principles calculations
- Author
-
Luigi Muzzi, Marco Buongiorno Nardelli, Luigi Morici, Gianluca De Marzi, Antonio della Corte, Della Corte, A., Muzzi, L., Morici, L., and De Marzi, G.
- Subjects
Superconductivity ,Materials science ,Condensed matter physics ,Phonon ,media_common.quotation_subject ,Condensed Matter - Superconductivity ,FOS: Physical sciences ,Superconducting magnet ,Condensed Matter Physics ,Asymmetry ,Brillouin zone ,Superconductivity (cond-mat.supr-con) ,Condensed Matter::Materials Science ,Lattice (order) ,Condensed Matter::Superconductivity ,Ultimate tensile strength ,General Materials Science ,Density functional theory ,media_common - Abstract
Using calculations from first principles based on density functional theory we have studied the strain sensitivity of the high-field superconducting magnet A15 Nb3Sn. The Nb3Sn lattice cell was deformed in the same way as observed experimentally on multi-filamentary, technological wires subject to loads applied along their axes. The phonon dispersion curves and electronic band structures along different high-symmetry directions in the Brillouin zone were calculated, at different levels of applied strain, {\epsilon}, both on the compressive and the tensile side. Starting from the calculated averaged phonon frequencies and electron-phonon coupling, the superconducting characteristic critical temperature of the material, Tc, has been calculated by means of the Allen-Dynes modification of the McMillan formula. As a result, the characteristic bell-shaped Tc vs. {\epsilon} curve, with a maximum at zero intrinsic strain, and with a slight asymmetry between the tensile and compressive sides, has been obtained. These first-principle calculations thus show that the strain sensitivity of Nb3Sn has a microscopic and intrinsic origin, originating from shifts in the Nb3Sn critical surface. In addition, our computations show that variations of superconducting properties of this compound are correlated to stress-induced changes in both the phononic and electronic properties. Finally, the strain function describing the strain sensitivity of Nb3Sn has been extracted from the computed Tc({\epsilon}) curve, and compared to experimental data from multi-filamentary wires. Both curves show the expected bell-shaped behavior, but the strain sensitivity of the wire is enhanced with respect to the theoretical predictions of the bulk, perfectly binary and stoichiometric Nb3Sn. Understanding the origin of this difference might open potential pathways towards the improvement of the strain tolerance in such systems., Comment: 7 pages, 6 figures
- Published
- 2012
42. Promising LOX proteins for cartilage-targeting osteoarthritis therapy.
- Author
-
Morici L, Allémann E, Jordan O, and Nikolić I
- Subjects
- Humans, Animals, Lipoxygenase Inhibitors therapeutic use, Lipoxygenase Inhibitors pharmacology, Lipoxygenases metabolism, Protein-Lysine 6-Oxidase metabolism, Protein-Lysine 6-Oxidase antagonists & inhibitors, Osteoarthritis drug therapy, Osteoarthritis metabolism, Cartilage, Articular metabolism, Cartilage, Articular drug effects, Cartilage, Articular pathology
- Abstract
Osteoarthritis (OA) is the most affected joint disease worldwide, touching millions of people every year. It is caused by a progressive degeneration of articular cartilage, causing pain and limited mobility. Among the pathways involved in cartilage homeostasis, "LOX" proteins (referring to three distinct protein families, very often confused in the literature) play a prominent role. The lipoxygenase enzyme family is involved in the inflammatory process of OA by inducing the production of several pro-inflammatory leukotrienes. Lectin-like oxidized low-density lipoprotein family are receptors located at the surface of chondrocytes, which interact with their ligand, ox-LDL, activating several catabolic pathways involved in OA pathophysiology. Finally, lysyl oxidase and lysyl oxidase-like are enzymes expressed intracellularly (in chondrocytes' cytoplasm) involved in elastin biosynthesis and collagen cross-linking in cartilage extracellular matrix. EMA and FDA have not yet approved any drug targeting the LOX proteins. In particular, today lysyl oxidase-like 2 is considered as a new promising target for OA modifying therapy. This review clarifies the main roles of different LOX proteins involved in the progression of OA. Potential LOX inhibitoion strategies for drug development in advanced OA therapy, particularly for local intraarticular delivery, were listed and discussed for each target type. This review, therefore, proposes promising strategies for future drug development in OA treatment., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2025 The Authors. Published by Elsevier Ltd.. All rights reserved.)
- Published
- 2025
- Full Text
- View/download PDF
43. Cartilage-targeted drug nanocarriers for osteoarthritis therapy.
- Author
-
Morici L, Allémann E, Rodríguez-Nogales C, and Jordan O
- Subjects
- Humans, Animals, Injections, Intra-Articular, Osteoarthritis drug therapy, Cartilage, Articular drug effects, Cartilage, Articular metabolism, Drug Carriers chemistry, Drug Delivery Systems methods, Nanoparticles
- Abstract
Osteoarthritis (OA) is a joint disease common worldwide. Currently, no disease-modifying osteoarthritis drugs (DMOADs) have successfully passed clinical trials, often due to a lack of cartilage penetration. Thus, targeting the extracellular matrix (ECM) is a major priority. The design of cartilage-targeting drug delivery systems (DDSs) for intra-articular administration requires consideration of the physicochemical properties of articular cartilage, such as its porosity and negative fixed charge. Various positively charged biomaterials such as polyaminoacids, proteins, polymers, and lipids can be used as DDSs to enhance cartilage penetration. Cationic nanocarriers interact electrostatically with anionic glycosaminoglycans of the ECM, ensuring passive cartilage-targeting penetration and prolonged retention. Active targeting strategies involve DDSs surface decoration using antibodies or peptides with a strong affinity for collagen II and chondrocytes in the cartilage. This review presents all the relevant bio-physicochemical properties of healthy and OA cartilages, as well as state-of-the-art intra-articular cartilage-targeted DDSs, intending to better understand the recent advances in the application of cartilage-targeting delivery systems for OA therapy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)
- Published
- 2024
- Full Text
- View/download PDF
44. Cell Free Bacteriophage Synthesis from Engineered Strains Improves Yield.
- Author
-
Brooks R, Morici L, and Sandoval N
- Subjects
- Escherichia coli genetics, Escherichia coli metabolism, Bacteriophage T7 genetics, DNA Replication, Bacteriophages metabolism
- Abstract
Phage therapy to treat life-threatening drug-resistant infections has been hampered by technical challenges in phage production. Cell-free bacteriophage synthesis (CFBS) can overcome the limitations of standard phage production methods by manufacturing phage virions in vitro. CFBS mimics intracellular phage assembly using transcription/translation machinery (TXTL) harvested from bacterial lysates and combined with reagents to synthesize proteins encoded by a phage genomic DNA template. These systems may enable rapid phage production and engineering to accelerate phages from bench-to-bedside. TXTL harvested from wild type or commonly used bacterial strains was not optimized for bacteriophage production. Here, we demonstrate that TXTL from genetically modified E. coli BL21 can be used to enhance phage T7 yields in vitro by CFBS. Expression of 18 E. coli BL21 genes was manipulated by inducible CRISPR interference (CRISPRi) mediated by nuclease deficient Cas12a from F. novicida (d Fn Cas12a) to identify genes implicated in T7 propagation as positive or negative effectors. Genes shown to have a significant effect were overexpressed (positive effectors) or repressed (negative effectors) to modify the genetic background of TXTL harvested for CFBS. Phage T7 CFBS yields were improved by up to 10-fold in vitro through overexpression of translation initiation factor IF-3 ( infC ) and small RNAs OxyS and CyaR and by repression of RecC subunit exonuclease RecBCD. Continued improvement of CFBS will mitigate phage manufacturing bottlenecks and lower hurdles to widespread adoption of phage therapy.
- Published
- 2023
- Full Text
- View/download PDF
45. Microfluidic preparation of various perfluorocarbon nanodroplets: Characterization and determination of acoustic droplet vaporization (ADV) threshold.
- Author
-
Melich R, Bussat P, Morici L, Vivien A, Gaud E, Bettinger T, and Cherkaoui S
- Subjects
- Acoustics, Contrast Media, Microbubbles, Microfluidics, Volatilization, Fluorocarbons
- Abstract
Over the last two decades, liquid perfluorocarbon nanodroplets (PFC-NDs), also known as Phase Change Contrast Agents (PCCAs), that are capable of vaporizing into gaseous echogenic microbubbles via an external stimulus, have gained much attention for diagnostic and therapeutic applications. In the present work, a microfluidic platform is evaluated for the preparation of various size-controlled nanodroplets. Here, two major lines of investigations were carried out. The first was to define the microfluidic device settings for the preparation of nanodroplets depending on the nature of the encapsulating shell such as lipids, fluorinated surfactants and PLGA biopolymers as well as the liquid perfluorocarbon core (perfluoropentane, perfluorohexane). Specifically, the effect of the microfluidic system parameters, such as total flow rate and flow rate ratio on PFC-NDs attributes including size and uniformity was assessed. Secondly, a custom-made set-up, based on echogenicity signals from produced bubbles, was designed and successfully applied to determine the Acoustic Droplet Vaporization (ADV) threshold of PFC-NDs. Finally, the influence of various formulation parameters on the vaporization outcome was investigated depending on the PFC type and the encapsulating shell composition (soft versus hard shells). This study indicates the usefulness of this novel formulation platform enabling the rapid design and optimization of narrowly dispersed nanodroplets at a reliable yield and ultimately accelerate nanomedicines development., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)
- Published
- 2020
- Full Text
- View/download PDF
46. Microbial contamination in next generation sequencing: implications for sequence-based analysis of clinical samples.
- Author
-
Strong MJ, Xu G, Morici L, Splinter Bon-Durant S, Baddoo M, Lin Z, Fewell C, Taylor CM, and Flemington EK
- Subjects
- Humans, Databases, Nucleic Acid, Equipment Contamination, High-Throughput Nucleotide Sequencing, Infections diagnosis, Infections genetics
- Abstract
The high level of accuracy and sensitivity of next generation sequencing for quantifying genetic material across organismal boundaries gives it tremendous potential for pathogen discovery and diagnosis in human disease. Despite this promise, substantial bacterial contamination is routinely found in existing human-derived RNA-seq datasets that likely arises from environmental sources. This raises the need for stringent sequencing and analysis protocols for studies investigating sequence-based microbial signatures in clinical samples.
- Published
- 2014
- Full Text
- View/download PDF
47. The impact of nitric oxide toxicity on the evolution of the glutathione transferase superfamily: a proposal for an evolutionary driving force.
- Author
-
Bocedi A, Fabrini R, Farrotti A, Stella L, Ketterman AJ, Pedersen JZ, Allocati N, Lau PC, Grosse S, Eltis LD, Ruzzini A, Edwards TE, Morici L, Del Grosso E, Guidoni L, Bovi D, Lo Bello M, Federici G, Parker MW, Board PG, and Ricci G
- Subjects
- Animals, Bacteria enzymology, Bacteria genetics, Glutathione Transferase genetics, Glutathione Transferase metabolism, Humans, Nitric Oxide genetics, Nitric Oxide metabolism, Evolution, Molecular, Glutathione Transferase chemistry, Nitric Oxide chemistry
- Abstract
Glutathione transferases (GSTs) are protection enzymes capable of conjugating glutathione (GSH) to toxic compounds. During evolution an important catalytic cysteine residue involved in GSH activation was replaced by serine or, more recently, by tyrosine. The utility of these replacements represents an enigma because they yield no improvements in the affinity toward GSH or in its reactivity. Here we show that these changes better protect the cell from nitric oxide (NO) insults. In fact the dinitrosyl·diglutathionyl·iron complex (DNDGIC), which is formed spontaneously when NO enters the cell, is highly toxic when free in solution but completely harmless when bound to GSTs. By examining 42 different GSTs we discovered that only the more recently evolved Tyr-based GSTs display enough affinity for DNDGIC (KD < 10(-9) M) to sequester the complex efficiently. Ser-based GSTs and Cys-based GSTs show affinities 10(2)-10(4) times lower, not sufficient for this purpose. The NO sensitivity of bacteria that express only Cys-based GSTs could be related to the low or null affinity of their GSTs for DNDGIC. GSTs with the highest affinity (Tyr-based GSTs) are also over-represented in the perinuclear region of mammalian cells, possibly for nucleus protection. On the basis of these results we propose that GST evolution in higher organisms could be linked to the defense against NO.
- Published
- 2013
- Full Text
- View/download PDF
48. Flavonoid naringenin: a potential immunomodulator for Chlamydia trachomatis inflammation.
- Author
-
Yilma AN, Singh SR, Morici L, and Dennis VA
- Subjects
- Animals, Cell Line, Chlamydia trachomatis immunology, Flow Cytometry, Granulocyte-Macrophage Colony-Stimulating Factor metabolism, Interleukin-10 metabolism, Interleukin-1alpha metabolism, Interleukin-1beta metabolism, Interleukin-6 metabolism, Macrophages drug effects, Mice, Phosphorylation drug effects, Real-Time Polymerase Chain Reaction, Toll-Like Receptor 2 metabolism, Toll-Like Receptor 4 metabolism, Tumor Necrosis Factor-alpha metabolism, p38 Mitogen-Activated Protein Kinases metabolism, Anti-Inflammatory Agents pharmacology, Chlamydia Infections immunology, Chlamydia trachomatis pathogenicity, Flavanones pharmacology, Immunologic Factors pharmacology, Macrophages metabolism
- Abstract
Chlamydia trachomatis, the agent of bacterial sexually transmitted infections, can manifest itself as either acute cervicitis, pelvic inflammatory disease, or a chronic asymptomatic infection. Inflammation induced by C. trachomatis contributes greatly to the pathogenesis of disease. Here we evaluated the anti-inflammatory capacity of naringenin, a polyphenolic compound, to modulate inflammatory mediators produced by mouse J774 macrophages infected with live C. trachomatis. Infected macrophages produced a broad spectrum of inflammatory cytokines (GM-CSF, TNF, IL-1β, IL-1α, IL-6, IL-12p70, and IL-10) and chemokines (CCL4, CCL5, CXCL1, CXCL5, and CXCL10) which were downregulated by naringenin in a dose-dependent manner. Enhanced protein and mRNA gene transcript expressions of TLR2 and TLR4 in addition to the CD86 costimulatory molecule on infected macrophages were modulated by naringenin. Pathway-specific inhibition studies disclosed that p38 mitogen-activated-protein kinase (MAPK) is involved in the production of inflammatory mediators by infected macrophages. Notably, naringenin inhibited the ability of C. trachomatis to phosphorylate p38 in macrophages, suggesting a potential mechanism of its attenuation of concomitantly produced inflammatory mediators. Our data demonstrates that naringenin is an immunomodulator of inflammation triggered by C. trachomatis, which possibly may be mediated upstream by modulation of TLR2, TLR4, and CD86 receptors on infected macrophages and downstream via the p38 MAPK pathway.
- Published
- 2013
- Full Text
- View/download PDF
49. Nasal carriage of methicillin-resistant Staphylococcus aureus among students at a Louisiana medical university.
- Author
-
Bellows C, Smith A, Wheeler J, and Morici L
- Subjects
- Adult, Case-Control Studies, Female, Humans, Louisiana, Male, Universities, Carrier State microbiology, Methicillin-Resistant Staphylococcus aureus isolation & purification, Nasal Cavity microbiology, Students, Medical statistics & numerical data
- Published
- 2013
- Full Text
- View/download PDF
50. Erythrocyte glutathione transferase: a novel biomarker to check environmental pollution hazardous for humans.
- Author
-
Fabrini R, Bocedi A, Del Grosso E, Morici L, Federici G, Palleschi A, and Ricci G
- Subjects
- Adult, Biomarkers analysis, Biomarkers metabolism, Female, Glutathione Transferase analysis, Humans, Italy, Male, Middle Aged, Oxidation-Reduction, Rivers, Sex Factors, Environmental Pollution, Erythrocytes enzymology, Glutathione Transferase biosynthesis, Hazardous Substances toxicity
- Abstract
Glutathione transferase (GST) is an enzyme capable of protecting the body from a lot of toxic compounds. Previous studies demonstrated that the erythrocyte GST (e-GST) expression increases as the level of circulating toxins increases. Aim of the present study is to verify if e-GST may represent a biomarker able to signalize an environmental pollution hazardous for humans. The study involved about 500 healthy volunteers living in eight distinct areas at or near the Sacco river valley, a region of the Frosinone district (Lazio-Italy) well known for its environmental pollution. Subjects of six areas displayed increased levels of e-GST ranging from 18% to 44% compared to 400 volunteers living in the Rome hinterland. Higher levels of GSTs are present in the areas where the risk of pollution is higher (areas 7 and 8). Interestingly, women living in the Sacco valley display much higher expression of e-GST than men, possibly due to a greater time exposition to the environmental contamination. Possible oxidative alteration of GST activity has not been observed. In conclusion, e-GST may represent an early and sensitive bio-signal of dangerous pollution for humans., (Copyright © 2012 Elsevier Inc. All rights reserved.)
- Published
- 2012
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.