Search

Interstitial oxygen embrittles titanium, particularly at cryogenic temperatures, which necessitates a stringent control of oxygen content in fabricating titanium and its alloys. Here, we propose a structural strategy, via grain refinement, to alleviate this problem. Compared to a coarse-grained counterpart that is extremely brittle at 77 K, the uniform elongation of an ultrafine-grained (UFG) microstructure (grain size ~ 2.0 µm) in Ti-0.3wt.%O is successfully increased by an order of magnitude, maintaining an ultrahigh yield strength inherent to the UFG microstructure. This unique strength-ductility synergy in UFG Ti-0.3wt.%O is achieved via the combined effects of diluted grain boundary segregation of oxygen that helps to improve the grain boundary cohesive energy and enhanced dislocation activities that contribute to the excellent strain hardening ability. The present strategy will not only boost the potential applications of high strength Ti-O alloys at low temperatures, but can also be applied to other alloy systems, where interstitial solution hardening results into an undesirable loss of ductility.

Individually, increasing the concentration of either oxygen or aluminum has a deleterious effect on the ductility of titanium alloys. For example, extremely small amounts of interstitial oxygen can severely deteriorate the tensile ductility of titanium, particularly at cryogenic temperatures. Likewise, substitutional aluminum will decrease the ductility of titanium at low-oxygen concentrations. Here, we demonstrate that, counter-intuitively, significant additions of both Al and O substantially improves both strength and ductility, with a 6-fold increase in ductility for a Ti-6Al-0.3 O alloy as compared to a Ti-0.3 O alloy. The Al and O solutes act together to increase and sustain a high strain-hardening rate by modifying the planar slip that predominates into a delocalized, three-dimensional dislocation pattern. The mechanism can be attributed to decreasing stacking fault energy by Al, modification of the "shuffle" mechanism of oxygen-dislocation interaction by the repulsive Al-O interaction in Ti, and micro-segregation of Al and O by the same cause.

One of the most potent examples of interstitial solute strengthening in metal alloys is the extreme sensitivity of titanium to small amounts of oxygen. Unfortunately, these small amounts of oxygen also lead to a markedly decreased ductility, which in turn drives the increased cost to purify titanium to avoid this oxygen poisoning effect. Here, we report a systematic study on the oxygen sensitivity of titanium that provides a clear mechanistic view of how oxygen impurities affect the mechanical properties of titanium. The increased slip planarity of Ti-O alloys is caused by an interstitial shuffling mechanism, which is sensitive to temperature, strain rate, and oxygen content and leads to the subsequent alteration of deformation twinning behavior. The insights from our experimental and computational work provide a rationale for the design of titanium alloys with increased tolerance to variations in interstitial content, with notable implications for more widespread use of titanium alloys.

Chemical short-range order (SRO) within a nominally single-phase solid solution is known to affect the mechanical properties of alloys. While SRO has been indirectly related to deformation, direct observation of the SRO domain structure, and its effects on deformation mechanisms at the nanoscale, has remained elusive. Here, we report the direct observation of SRO in relation to deformation using energy-filtered imaging in a transmission electron microscope (TEM). The diffraction contrast is enhanced by reducing the inelastically scattered electrons, revealing subnanometer SRO-enhanced domains. The destruction of these domains by dislocation planar slip is observed after ex situ and in situ TEM mechanical testing. These results confirm the impact of SRO in Ti-Al alloys on the scale of angstroms. The direct confirmation of SRO in relationship to dislocation plasticity in metals can provide insight into how the mechanical behavior of concentrated solid solutions by the material's thermal history.

Using ex-situ transmission electron microscopy and the recently developed nanoprobe diffraction (NPD) technique, we characterize a nanoindented solution treated gum metal. Lattice rotations are resolved at a 1.2 nm length-scale and shown to be continuous within the nanoindentation pit; further, it is shown that these can be accommodated by a reasonable number of geometrically necessary dislocations at a density of ∼1015/m2. We additionally provide direct evidence that dislocations within the nanoindent, rather than secondary phase nanoparticles, can serve as potent barriers to dislocation motion. We also demonstrate that plasticity in these alloys under nanoindentation can be accommodated solely by dislocation nucleation and propagation, with no competing deformation mechanisms present. Conventional transmission electron microscopy and “g•b” analysis reveal the presence of dislocations on 〈1¯11〉{110} slip systems and highly localized plastic deformation in the form of shear bands on {1¯1¯2} slip systems, similar to previously observed “giant faults”.

Protein Tyrosine Phosphatase 1B (PTP1B) is a negative regulator of leptin signaling whose disruption protects against diet-induced obesity in mice. We investigated whether structural characterization of human PTP1B variant proteins might reveal precise mechanisms to target for weight loss therapy. We selected 12 rare variants for functional characterization from exomes from 997 people with persistent thinness and 200,000 people from UK Biobank. Seven of 12 variants impaired PTP1B function by increasing leptin-stimulated STAT3 phosphorylation in cells. Using room-temperature X-ray crystallography, hydrogen-deuterium exchange mass spectrometry, and computational modeling, we determined that human variants modulate the 3-dimensional structure of PTP1B through distinct allosteric conduits that energetically link distal, highly ligandable structural regions to the active site. These studies inform the design of allosteric PTP1B inhibitors for the treatment of obesity., Competing Interests: Competing interests: ISF has consulted for a number of companies developing weight loss drugs including Eli Lilly, Novo Nordisk and Rhythm Pharmaceuticals. The other authors declare no competing interests.

The key characteristic (KCs) framework has been used previously to assess the carcinogenicity and cardiotoxicity of various chemical and pharmacological agents. Here, the 12 KCs of cardiotoxicity are used to evaluate the previously reported cardiotoxicity of phenanthrene (Phe), a tricyclic polycyclic aromatic hydrocarbon (PAH), and major component of fossil fuel-derived air pollution. Phe is a semi-volatile pollutant existing in both the gas phase and particle phase through adsorption onto or into particulate matter (PM). Phe can translocate across the airways and gastrointestinal tract into the systemic circulation, enabling body-wide effects. Our evaluation based on a comprehensive literature review, indicates Phe exhibits 11 of the 12 KCs for cardiotoxicity. These include adverse effects on cardiac electromechanical performance, the vasculature and endothelium, immunomodulation and oxidative stress, and neuronal and endocrine control. Environmental agents that have similarly damaging effects on the cardiovascular system are heavily regulated and monitored, yet globally there is no air quality regulation specific for PAHs like Phe. Environmental monitoring of Phe is not the international standard with benzo[a]pyrene being frequently used as a proxy despite the two PAH species exhibiting significant differences in sources, concentration variations and toxic effects. The evidence summarised in this evaluation highlights the need to move away from proxied PAH measurements and develop a monitoring network capable of measuring Phe concentration. It also stresses the need to raise awareness amongst the medical community of the potential cardiovascular impact of PAH exposure. This will allow the production of mitigation strategies and possibly the development of new policies for the protection of the societal groups most vulnerable to cardiovascular disease., Competing Interests: Declaration of Competing Interest Authors have no competing interests to declare., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

It has been known for decades that the application of pulsed direct current can significantly enhance the formability of metals. However, the detailed mechanisms of this effect have been difficult to separate from simple Joule heating. Here, we study the electroplastic deformation of Ti-Al (7 at.% Al), an alloy that is uniquely suited for uncoupling this behaviour because, contrary to most metals, it has inherently lower ductility at higher temperature. We find that during mechanical deformation, electropulsing enhances cross-slip, producing a wavy dislocation morphology, and enhances twinning, which is similar to what occurs during cryogenic deformation. As a consequence, dislocations are prevented from localizing into planar slip bands that would lead to the early failure of the alloy under tension. Our results demonstrate that this macroscopic electroplastic behaviour originates from defect-level microstructural reconfiguration that cannot be rationalized by simple Joule heating.

Antigen receptor assembly in lymphocytes involves stringently-regulated coordination of specific DNA rearrangement events across several large chromosomal domains. Previous studies indicate that transcription factors such as paired box 5 (PAX5), Yin Yang 1 (YY1), and CCCTC-binding factor (CTCF) play a role in regulating the accessibility of the antigen receptor loci to the V(D)J recombinase, which is required for these rearrangements. To gain clues about the role of CTCF binding at the murine immunoglobulin heavy chain (IgH) locus, we utilized a computational approach that identified 144 putative CTCF-binding sites within this locus. We found that these CTCF sites share a consensus motif distinct from other CTCF sites in the mouse genome. Additionally, we could divide these CTCF sites into three categories: intergenic sites remote from any coding element, upstream sites present within 8 kb of the V H -leader exon, and recombination signal sequence (RSS)-associated sites characteristically located at a fixed distance (∼18 bp) downstream of the RSS. We noted that the intergenic and upstream sites are located in the distal portion of the V H locus, whereas the RSS-associated sites are located in the D H -proximal region. Computational analysis indicated that the prevalence of CTCF-binding sites at the IgH locus is evolutionarily conserved. In all species analyzed, these sites exhibit a striking strand-orientation bias, with >98% of the murine sites being present in one orientation with respect to V H gene transcription. Electrophoretic mobility shift and enhancer-blocking assays and ChIP-chip analysis confirmed CTCF binding to these sites both in vitro and in vivo ., (© 2019 Ciccone et al.)

Introduction: This study was designed to evaluate the long-term prevalence of gingival recession after orthodontic tooth movements, focusing on the effects of mandibular incisor proclination and expansion of maxillary posterior teeth., Methods: Records of 205 patients (162 female, 43 male) were obtained from 2 private practice orthodontists. Using pretreatment (age, 14.0 ± 5.9 years) and posttreatment (age, 16.5 ± 6.0 years) lateral cephalograms and dental models, mandibular incisor proclination and maxillary arch widths were measured. Gingival recession was measured based on posttreatment and postretention (age, 32.3 ± 8.5 years) intraoral photographs and models. Associations between tooth movements and gingival recession were evaluated statistically., Results: Only 5.8% of teeth exhibited recession at the end of orthodontic treatment (only 0.6% had recession >1 mm). After retention, 41.7% of the teeth showed recession, but the severity was limited (only 7.0% >1 mm). There was no relationship between mandibular incisor proclination during treatment and posttreatment gingival recession. Incisors that finished treatment angulated (IMPA) at 95° or greater did not show significantly more recession than did those that finished less than 95°. There were weak positive correlations (r = 0.17-0.41) between maxillary arch width increases during treatment and posttreatment recession., Conclusions: Orthodontic treatment is not a major risk factor for the development of gingival recession. Although greater amounts of maxillary expansion during treatment increase the risks of posttreatment recession, the effects are minimal., (Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Primary cutaneous anaplastic large cell lymphoma (PCALCL) is a rare CD30 + lymphoproliferative disorder with excellent outcomes reported despite frequent cutaneous relapses. Limited information exists on the development of systemic lymphoma. The British Columbia Cancer Agency (BCCA) Lymphoid Cancer Database was searched to identify all adults diagnosed with PCALCL from 1993 to 2013. From 2005, the BCCA endorsed radiotherapy (RT) alone for limited stage with data failing to support chemotherapy. Forty-seven patients were identified with a male predominance (n = 31, 66%), median age of 64 years and predominantly limited stage (n = 40, 85%). Median follow-up was 8·4 years. The 5-year time to progression (TTP) was 58% (64% limited versus 29% advanced stage). The 5-year disease-specific survival (DSS) and overall survival was 86% and 75%, respectively. In an as-treated analysis, the 5-year DSS for limited stage patients was similar comparing RT to combined modality treatment or chemotherapy alone but the 5-year TTP favoured RT (82% vs. 33%, P = 0·004). The 5-year cumulative risk of developing systemic lymphoma was 14%. Our results confirm the favourable prognosis of PCALCL despite a high relapse rate. Limited stage patients treated with RT alone have excellent outcomes. There is a small risk of systemic lymphoma in PCALCL., (© 2016 John Wiley & Sons Ltd.)

Density-functional-theory calculations of twin-boundary energies in hexagonal close packed metals reveal anomalously low values for elemental Tc and Re, which can be lowered further by alloying with solutes that reduce the electron per atom ratio. The anomalous behavior is linked to atomic geometries in the interface similar to those observed in bulk tetrahedrally close packed phases. The results establish a link between twin-boundary energetics and the theory of bulk structural stability in transition metals that may prove useful in controlling mechanical behavior in alloy design.

The postembryonic development and caste differentiation patterns of lower termites have been described multiple times in a variety of different species. However, most of these studies focused on gross ontogeny, without carefully describing the maturation of any particular organ or organ system. The few studies that have attempted to correlate caste development and organ differentiation have produced somewhat inconsistent results, especially in the area of eye formation. Therefore, in order to help further elucidate the relationship between eye formation and postembryonic differentiation in lower termites, we studied eye development in the termite, Incisitermes minor (Hagen). Eye formation in I. minor began in the earliest larvae, with only an eye primordium. However, in all later larval stages, characteristic eye structures were observed and were shown to progressively differentiate through larval and nymphal stages. Curiously, pigmentation began with three to eight groups of cells in early larvae and the number of these pigmented groups increased along the developmental time course. Ultimately, a uniformly pigmented eye area was formed by the early nymphal stage. The overall eye area also gradually increased along with normal caste development, but the characteristic lenses seen in a prototypical insect compound eye did not completely form until after the final nymphal stage. Electrophysiological measurements provided clear evidence that eyes were indeed functional at all stages of development where pigment was present. Based upon this data, the eye development pattern in I. minor appeared to follow a divergent pathway from holometabolous insects and an intermediate pathway between typical hemimetabolous eye development and the heterochronic shift observed in other termite species.

Structural alloys are often strengthened through the addition of solute atoms. However, given that solute atoms interact weakly with the elastic fields of screw dislocations, it has long been accepted that solution hardening is only marginally effective in materials with mobile screw dislocations. By using transmission electron microscopy and nanomechanical characterization, we report that the intense hardening effect of dilute oxygen solutes in pure α-Ti is due to the interaction between oxygen and the core of screw dislocations that mainly glide on prismatic planes. First-principles calculations reveal that distortion of the interstitial sites at the screw dislocation core creates a very strong but short-range repulsion for oxygen that is consistent with experimental observations. These results establish a highly effective mechanism for strengthening by interstitial solutes., (Copyright © 2015, American Association for the Advancement of Science.)

Landfill functional stability provides a target that supports no environmental threat at the relevant point of exposure in the absence of active control systems. With respect to leachate management, this study investigates "gateway" indicators for functional stability in terms of the predictability of leachate characteristics, and thus potential threat to water quality posed by leachate emissions. Historical studies conducted on changes in municipal solid waste (MSW) leachate concentrations over time (longitudinal analysis) have concentrated on indicator compounds, primarily chemical oxygen demand (COD) and biochemical oxygen demand (BOD). However, validation of these studies using an expanded database and larger constituent sets has not been performed. This study evaluated leachate data using a mixed-effects regression model to determine the extent to which leachate constituent degradation can be predicted based on waste age or operational practices. The final dataset analyzed consisted of a total of 1402 samples from 101 MSW landfills. Results from the study indicated that all leachate constituents exhibit a decreasing trend with time in the post-closure period, with 16 of the 25 target analytes and aggregate classes exhibiting a statistically significant trend consistent with well-studied indicators such as BOD. Decreasing trends in BOD concentration after landfill closure can thus be considered representative of trends for many leachate constituents of concern., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Prostate cancer (PCa) is believed to metastasize through the blood/lymphatics systems; however, PCa may utilize the extensive innervation of the prostate for glandular egress. The interaction of PCa and its nerve fibers is observed in 80% of PCa and is termed perineural invasion (PNI). PCa cells have been observed traveling through the endoneurium of nerves, although the underlying mechanisms have not been elucidated. Voltage sensitive sodium channels (VSSC) are multimeric transmembrane protein complexes comprised of a pore-forming α subunit and one or two auxiliary beta (β) subunits with inherent cell adhesion molecule (CAM) functions. The beta-2 isoform (gene SCN2B) interacts with several neural CAMs, while interacting putatively with other prominent neural CAMs. Furthermore, beta-2 exhibits elevated mRNA and protein levels in highly metastatic and castrate-resistant PCa. When overexpressed in weakly aggressive LNCaP cells (2BECFP), beta-2 alters LNCaP cell morphology and enhances LNCaP cell metastasis associated behavior in vitro. We hypothesize that PCa cells use beta-2 as a CAM during PNI and subsequent PCa metastasis. The objective of this study was to determine the effect of beta-2 expression on PCa cell neurotropic metastasis associated behavior. We overexpressed beta-2 as a fusion protein with enhanced cyan fluorescence protein (ECFP) in weakly aggressive LNCaP cells and observed neurotropic effects utilizing our novel ex vivo organotypic spinal cord co-culture model, and performed functional assays with neural matrices and atomic force microscopy. With increased beta-2 expression, PCa cells display a trend of enhanced association with nerve axons. On laminin, a neural CAM, overexpression of beta-2 enhances PCa cell migration, invasion, and growth. 2BECFP cells exhibit marked binding affinity to laminin relative to LNECFP controls, and recombinant beta-2 ectodomain elicits more binding events to laminin than BSA control. Functional overexpression of VSSC beta subunits in PCa may mediate PCa metastatic behavior through association with neural matrices.

In this paper we discuss the microstructure of lath martensitic steels and the mechanisms by which it controls cleavage fracture. The specific experimental example is a 9Ni (9 wt% Ni) steel annealed to have a large prior austenite grain size, then examined and tested in the as-quenched condition to produce a relatively coarse lath martensite. The microstructure is shown to approximate the recently identified 'classic' lath martensite structure: prior austenite grains are divided into packets, packets are subdivided into blocks, and blocks contain interleaved laths whose variants are the two Kurjumov-Sachs relations that share the same Bain axis of the transformation. When the steel is fractured in brittle cleavage, the laths in the block share {100} cleavage planes and cleave as a unit. However, cleavage cracks deflect or blunt at the boundaries between blocks with different Bain axes. It follows that, as predicted, the block size governs the effective grain size for cleavage.

Municipal solid waste landfills represent the dominant option for waste disposal in many parts of the world. While some countries have greatly reduced their reliance on landfills, there remain thousands of landfills that require aftercare. The development of cost-effective strategies for landfill aftercare is in society's interest to protect human health and the environment and to prevent the emergence of landfills with exhausted aftercare funding. The Evaluation of Post-Closure Care (EPCC) methodology is a performance-based approach in which landfill performance is assessed in four modules including leachate, gas, groundwater, and final cover. In the methodology, the objective is to evaluate landfill performance to determine when aftercare monitoring and maintenance can be reduced or possibly eliminated. This study presents an improved gas module for the methodology. While the original version of the module focused narrowly on regulatory requirements for control of methane migration, the improved gas module also considers best available control technology for landfill gas in terms of greenhouse gas emissions, air quality, and emissions of odoriferous compounds. The improved module emphasizes the reduction or elimination of fugitive methane by considering the methane oxidation capacity of the cover system. The module also allows for the installation of biologically active covers or other features designed to enhance methane oxidation. A methane emissions model, CALMIM, was used to assist with an assessment of the methane oxidation capacity of landfill covers., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Introduction: Three randomized trials have demonstrated that post-radical prostatectomy (RP) radiotherapy decreases biochemical relapse for those with adverse pathology. Our purpose was to describe the incidence of pathologic risk factors for recurrence in a contemporary series of patients treated with RP and to describe the use of post-RP radiotherapy., Methods: All incident prostate cancers diagnosed between January 2005 and December 2007 were identified from the tumour registry. Cases were then linked to radiotherapy records which included dose and modality (external beam radiotherapy and brachytherapy). The pathology reports in the tumour registry were reviewed for pathologic stage, grade and margin status., Results: We identified 9223 patients with prostate cancer. Overall, 36.3% of patients treated with RP had positive margins, and may have benefited from adjuvant radiotherapy. After RP, 332 (15%) patients had radiotherapy to the prostate bed; of these, only 25 (1.1%) received truly adjuvant radiotherapy (delivered within 6 months with a prostate-specific antigen of <0.2 ng/mL). Of the 2181 patients treated with RP, 270 (12%) were seen by a radiation oncologist within 6 months of RP. Of the 1015 patients (47%) with adverse RP pathology (positive margins, extracapsular extension or seminal vesicle invasion), 230 (23%) were seen by a radiation oncologist within 6 months of RP., Conclusion: Not all patients with adverse prostatectomy pathology were seen by a radiation oncologist post-prostatectomy, and very few received adjuvant radiotherapy despite almost half of them having risk factors for relapse.

After closure, municipal solid waste (MSW) landfills must be managed and controlled to avoid adverse effects on human health and the environment (HHE). Aftercare (or post-closure care) can be brought to an end when the authorities consider the landfill to no longer pose a threat to HHE. Different approaches have been suggested for long-term landfill management and evaluation of aftercare completion. In this paper, research on aftercare and its completion is analyzed and regulatory approaches for the completion of landfill aftercare are reviewed. Approaches to aftercare could be categorized as (i) target values, (ii) impact/risk assessment, and (iii) performance based. Comparison of these approaches illustrates that each has limitations and strengths. While target values are typically used as screening indicators to be complemented with site-specific assessments, impact/risk assessment approaches address the core issue about aftercare completion, but face large uncertainties and require a high level of expertise. A performance-based approach allows for the combination of target values and impact/risk assessments in a consistent evaluation framework with the aim of sequentially reducing aftercare intensity and, ultimately, leading to the completion of aftercare. At a regulatory level, simple qualitative criteria are typically used as the primary basis for defining completion of aftercare, most likely due to the complexity of developing rigorous evaluation methodologies. This paper argues that development of transparent and consistent regulatory procedures represents the basis for defining the desired state of a landfill at the end of aftercare and for reducing uncertainty about the intensity and duration of aftercare. In this context, recently presented technical guidelines and the ongoing debate with respect to their regulatory acceptance are a valuable step towards developing strategies for the cost-effective protection of HHE at closed MSW landfills. To assess the practicality of evaluation methodologies for aftercare, well-documented case studies including regulatory review and acceptance are needed., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Landfills have been the dominant alternative for disposal of solid waste and there are tens of thousands of closed landfills throughout the world that require a long-term management strategy. In contrast to approaches based on time or target values, this paper describes a performance-based methodology for evaluation of post-closure care (PCC). Using the methodology, critical components of PCC at a landfill, including leachate and gas management, groundwater monitoring and cover integrity, are considered to determine whether a landfill meets defined conditions for functional stability and can transition from regulated PCC to a post-regulatory custodial care program representing de minimus care activities only. The methodology is predicated on understanding the biological, chemical, and physical behavior of a landfill and the presence of sufficient data to verify expected trends in landfill behavior. If an evaluation suggests that a change can be made to PCC, the landfill owner must perform confirmation monitoring and then surveillance monitoring at a decreasing frequency to verify that the change is protective of human health and the environment. A hypothetical case study showed that using the methodology to evaluate site-specific PCC requirements could result in increased environmental protection at comparable cost by spending available funds where they are most needed., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Technologies for reducing the levels of tobacco product constituents that may contribute to unwanted health effects are desired. Target compounds include tobacco-specific nitrosamines (TSNAs), a class of compounds generated through the nitrosation of pyridine alkaloids during the curing and processing of tobacco. Studies have reported the TSNA N'-nitrosonornicotine (NNN) to be carcinogenic in laboratory animals. NNN is formed via the nitrosation of nornicotine, a secondary alkaloid produced through enzymatic N-demethylation of nicotine. Strategies to lower nornicotine levels in tobacco (Nicotiana tabacum L.) could lead to a corresponding decrease in NNN accumulation in cured leaves. The major nicotine demethylase gene of tobacco has recently been isolated. In this study, a large-scale field trial was conducted to evaluate transgenic lines of burley tobacco carrying an RNA interference (RNAi) construct designed to inhibit the expression of this gene. Selected transgenic lines exhibited a six-fold decrease in nornicotine content relative to untransformed controls. Analysis of cured leaves revealed a commensurate decrease in NNN and total TSNAs. The inhibition of nicotine demethylase activity is an effective means of decreasing significantly the level of a key defined animal carcinogen present in tobacco products.

A newly discovered group of alloys, called Gum Metals, approaches ideal strength in bulk form, exhibits significant plastic deformation prior to failure, and shows no indications of conventional-dislocation activity. Two conditions must be met for a material to exhibit this "ideal" behavior: (1) the stress required to trigger conventional-dislocation plasticity in the material must exceed its ideal strength, and (2) the material must be intrinsically ductile when stressed to ideal strength. Gum Metals satisfy both criteria, explaining their remarkable mechanical properties.

The magnitude of annual global emissions of methane from municipal solid waste landfills without landfill gas control systems implies that these landfills are significant contributors to the atmospheric load of greenhouse gases. There have been a number of field studies undertaken internationally to measure actual fluxes of methane and carbon dioxide from landfills, with a view to corroborating modelled predictions of the contribution of landfills to the global greenhouse gas budget. The vast majority of these studies have been undertaken in more temperate climates and in developed countries. This paper reports a study of landfill gas emissions from four large landfills located in the semi-arid interior of South Africa. A static accumulation chamber was used and measurements were made at each site over a period of two to three days. The results were analysed by three different methods, all of them leading to the same general conclusion that landfill gas emission rates were lower than expected. A common conclusion based on results from all four sites was that capping of landfills in semi-arid climates with low permeability covers would probably significantly retard the already low rate of waste degradation and thus gas generation. While this may be regarded as advantageous in the short term, it cannot be relied upon in perpetuity as clayey landfill covers will inevitably desiccate and crack in a semiarid environment. In addition, reasonable after-care periods for such landfills are likely to extend well beyond the currently stipulated 30-year period, and efforts to encourage energy recovery from landfills may be hampered because gas generation rates decrease as the waste dries out under conditions of minimal recharge from precipitation. A landfill cover that allows small amounts of percolation of rainfall into the waste may therefore in fact be beneficial in semiarid climates, although care would need to be taken to carefully regulate this infiltration.

We have calculated the phonon spectra of aluminum as a function of strain using density functional perturbation theory for <110>, <100>, and <111> uniaxial tension, as well as relaxed <112>[111] shear. In all four cases, phonon instabilities occur at points away from the center of the Brillouin zone and intrude before the material becomes unstable according to elastic stability criteria. This is the first time the ideal strength of a metal has been shown to be dictated by instabilities in the acoustic phonon spectra. We go on to describe the crystallography of the unstable modes, all of which are shear in character. This work further suggests that shear failure is an inherent property of aluminum even in an initially dislocation-free perfect crystal.

This paper presents findings from long-term monitoring studies performed at full-scale municipal solid waste landfill facilities with leachate recirculation. Data from two facilities at a landfill site in Delaware, USA were evaluated as part of this study: (1) Area A/B landfill cells; and (2) two test cells (one with leachate recirculation and one control cell). Data from Area A/B were compared with proposed waste stability criteria for leachate quality, landfill gas production, and landfill settlement. Data from the test cells were directly compared with each other. Overall, the trends at Area A/B pointed to the positive effects (i.e., more rapid waste degradation) that may be realized through increasing moisture availability in a landfill relative to the reported behavior of more traditionally operated (i.e., drier) landfills. Some significant behavioral differences between the two test cells were evident, including dissimilarities in total landfill gas production quantity and the extent of waste degradation observed in recovered time capsules. Differences in leachate quality were not as dramatic as anticipated, probably because the efficiency of the leachate recirculation system at distributing leachate throughout the waste body in the recirculation cell was low.

In situ transmission electron microscopy is an established experimental technique that permits direct observation of the dynamics and mechanisms of dislocation motion and deformation behavior. In this article, we detail the development of a novel specimen goniometer that allows real-time observations of the mechanical response of materials to indentation loads. The technology of the scanning tunneling microscope is adopted to allow nanometer-scale positioning of a sharp, conductive diamond tip onto the edge of an electron-transparent sample. This allows application of loads to nanometer-scale material volumes coupled with simultaneous imaging of the material's response. The emphasis in this report is qualitative and technique oriented, with particular attention given to sample geometry and other technical requirements. Examples of the deformation of aluminum and titanium carbide as well as the fracture of silicon will be presented.

The ideal shear strength of transition metal carbides and nitrides is calculated with the use of the ab initio pseudopotential density functional method. The microscopic mechanism that limits the ideal strength is studied using full atomic and structural relaxation and the results of electronic structure calculations. It is shown that plasticity in perfect crystals can be triggered by electronic instabilities at finite strains. Our study explicitly demonstrates that the ideal strength in these materials is limited by the elastic instability which is in turn initiated by electronic instabilities. The potential application of alloy hardening due to the onset of instabilities at different strains is also discussed.

Arabidopsis thaliana BAC T07M07 encoding the abscisic acid-insensitive 4 (ABI4) locus has been sequenced completely. It contains a 95,713-bp insert and 24 predicted genes. Most putative genes were confirmed by gel-based RNA profiling and a cluster of ABA-regulated genes was identified. One of the 24 genes, designated PP2C5, encodes a putative protein phosphatase 2C. The encoded protein was expressed in Escherichia coli, and its enzyme activity in vitro was confirmed.

A method for construction of bacterial artificial chromosome (BAC) contigs from a yeast artificial chromosome (YAC) physical map is described. An approximately 2 Mb contig, consisting of two large BAC contigs linked by a small YAC, has been assembled in the region around 80 cM of Arabidopsis thaliana chromosome 2. Clones from this contig will facilitate gene isolation in the region and can be used directly as substrates for DNA sequencing.

The genetic resolution of paternity disputes begins with an intricate detection of inherited traits and finishes with a statistical inference (the probability of paternity, W). Notwithstanding some initial fanfare, statistical inference is a necessary component of DNA-based paternity tests because band patterns may be rare but not yet unique, and even rare events in a vacuum are meaningless. The genetic match must be combined with other evidence for relevancy, thus a Bayesian approach is preferred when computing W. This paper reviews the standard model used to compute W and discusses the model's various properties and assumptions. The standard model is extended to include DNA systems in which alleles are operationally continuous due to measurement error. This extension avoids problems associated with 'matched/non-matched' binned decisions. After outlining the model assumptions for a single DNA system, particular attention is given to the product rule-the procedure of multiplying intermediate probabilities across genetic loci to form a combined W. An empirical alternative to the product rule is also assessed and correlated with standard procedures.

While a large portion of pharmaceutical stability data is known to follow an exponential model decay, linear modeling of this data for expiry estimation is the norm. Expiry predictions based on linear and exponential fits to stability data were made to estimate the bias due to the linear fitting. It was found that within the usual expiry limits on drug potency, the difference between the model fits is relatively trivial. In cases of loss of potency greater than 15%, small assay variability, or great disparity between the length of the study and the time of expiry prediction, however, there is a nontrivial difference in the predictions and the exponential model is preferable.

A method for rapid identification of bacterial cytokinins has been developed in which cultures are fed [(3)H]adenine, the cytokinins (including (3)H-labeled cytokinins) are isolated by immunoaffinity chromatography, and analyzed by HPLC with on-line scintillation counting. Analysis of Agrobacterium tumefaciens strains showed that some produced primarily trans-zeatin, whereas others produced primarily trans-zeatin riboside. Pseudomonas syringae pv savastanoi produced mixtures of trans-zeatin, dihydrozeatin, 1''-methyl-trans-zeatin riboside, and other unknown cytokinin-like substances. Corynebacterium fascians, produced cis-zeatin, isopentenyladenine and isopentenyladenosine. The technique is designed for qualitative rather than quantitative studies and allows ready identification of bacterial cytokinins. It may also have utility in the study of plant cytokinins if adequate incorporation of label into cytokinin precursor pools can be achieved.

The purpose of this study was to determine whether erroneous kVp meter readings, induced by plastic wrap, affected the actual kVp (output) of a dental X-ray machine. To evaluate the effect of plastic wrap on dental X-ray machine kVp meters, a radiation output device was used to measure output in mR/ma.s. An intraoral dental X-ray unit (S.S. White Model #90W) was used to make the exposures. First, the kVp meter was not covered with plastic wrap and output readings were recorded at various kVp settings with the milliamperage and time held constant. Secondly, the same kVp settings were selected before the plastic wrap was placed. Milliamperage and time were again held to the same constant. The X-ray console was then covered with plastic wrap prior to measuring the output for each kVp. The wrap possessed a static charge. This charge induced erroneous kVp meter readings. Out-put readings at the various induced kVp settings were then recorded. A kVp of 50 with no wrap present resulted in the same output as a kVp of 50 induced to read 40 or 60 kVp by the presence of wrap. Similar results were obtained at other kVp settings. This indicates that the plastic wrap influences only the kVp meter needle and not the actual kilovoltage of the X-ray machine. Dental X-ray machine operators should select kVp meter readings prior to placing plastic wrap and should not adjust initial settings if the meter is deflected later by the presence of wrap. The use of such a procedure will result in proper exposures, fewer retakes, and less patient radiation. If plastic wrap leads to consistent exposure errors, clinicians may wish to use a 0.5% sodium hypochlorite disinfectant as an alternative to the barrier technique.

The Naval Medical Research Institute currently conducts hyperbaric research in a Man-Rated Chamber Complex (MRCC) originally installed in 1977. Significant engineering alterations to the MRCC and rusting of some of its interior sections necessitated repainting, which was completed in 1988. Great care was taken in selecting an appropriate paint (polyamide epoxy) and in ensuring correct application and curing procedures. Only very low levels of hydrocarbons were found in the MRCC atmosphere before initial pressurization after painting and curing. After pressurization, however, significant chemical contamination was found. The primary contaminants were aromatic hydrocarbons: xylenes (which were a major component of both the primer and topcoat paint) and ethyl benzene. The role that pressure played in stimulating off-gassing from the paint is not clear; the off-gassing rate was observed to be similar over a large range in chamber pressures from 1.6 to 31.0 atm abs. Scrubbing the chamber atmosphere with the chemical absorbent Purafil was effective in removing the contaminants. Contamination has been observed to slowly decline with chamber use and is expected to continue to improve with time. However, this contamination experience emphasizes the need for a high precision gas analysis program at any diving facility to ensure the safety of the breathing gas and chamber atmosphere.

The expression of fos protein was examined in 30 cases of human osteosarcoma as formalin-fixed and paraffin-embedded tissue sections using two monoclonal antibodies and, for five cases, as frozen sections using 3 polyclonal antibodies. Nuclear antibody labeling intensities were determined either by visual scoring (3 pathologists) or by microdensitometry and included over 700 tumor, 350 normal and 150 benign tissue observations. Visual scores were shown to be linear with optical density with a correlation coefficient of 0.97. Analysis of the osteosarcoma cases at one antibody concentration revealed two groups: a minority (39%) with a low average visual score of 2 +/- 0.2 which was very similar to benign and normal tissues, and a majority (61%) with an average score of 3.1 +/- 0.3. The difference is highly significant (t-test), P less than or equal to 0.01. The results were supported by an analysis of partial immunotitration curves using a curve-fitting procedure which yielded estimates of FOSo (maximum relative fos protein concentration) which were ca. 150% increased for the majority tumor group compared to the minority group or benign or normal tissues. In previous studies of v-sis transformed cells, which exhibit ca. 300% over-expression of c-fos protein as observed here, antisense techniques were used to show that over-expression leads to increased growth and loss of contact inhibition. Thus the combined results suggest that steady state c-fos protein is significantly elevated in, and may contribute to, the aggressive growth properties of a majority of human osteosarcomas.