Search

OBJECTIVE: The physical and physical chemistry is able to influence the interaction of the scaffolds and bone substitutes with the body fluid and blood. The aim of the present investigation was to evaluate the wettability properties of an Mg-HA Chitosan-based Gel with blood vs. autologous platelet gel. MATERIALS AND METHODS: A total of 6 study groups were evaluated according to the Mg-HA Chitosan-based Gel thickness (1, 2 and 3 mm) and the fluids (blood vs. autologous platelet gel). The biomaterial wettability was conducted through the sessile drop technique. RESULTS: The study findings showed a significant difference in contact angles between the APL and blood groups (p<0.05). The MG-Ha Chitosan-based membrane thicknesses seem to produce no significant effects on contact angles measurement for all groups (p>0.05). CONCLUSIONS: In the present investigation, a similar MG/Ha gel membranes wettability was reported between APL and blood groups. In addition, a high hydrophilicity of MG/Ha gel membranes was reported with a potential advantage in terms of a more effective osteogenic capability in the clinical practice. [ABSTRACT FROM AUTHOR]

BACKGROUND: Horizontal atrophic ridges need a regenerative procedure for implant positioning and fixed rehabilitation. Cone Morse taper implants are characterized by the intimate fitting of the prosthetic interface with the absence of microgaps and micromovements of the interfaces. The aim of this case report was to evaluate the clinical outcome of Cone Morse implant design in split crest augmentation treatment. CASE REPORT: A female patient with partial edentulism of atrophic posterior maxilla was treated for split crest procedure and implant-supported rehabilitation. A full-thickness flap was elevated, and horizontal and vertical osteotomic lines were produced with piezoelectric device. A total of 4 Cone Morse Taper implants (Universal III, Implacil de Bortoli, Brasil) were positioned and the site was grafted with bone substitute and covered by a heterologous membrane. CONCLUSIONS: A complete healing of the surgical site was evident at the follow-up with no evidence of bone resorption. No radiolucency or inflammatory aspects of the treated site were evident in the radiographic control. Simultaneous Cone Morse implants positioning with split crest technique seems to be a promising treatment for posterior maxillary rehabilitation of atrophic edentulous ridges. [ABSTRACT FROM AUTHOR]

OBJECTIVE: It is suggested that hidradenitis suppurativa (HS) is more prevalent and causes greater morbidity in Black patients than in White. Clinical data are however lacking. PATIENTS AND METHODS: We therefore describe HS risk factors, disease severity and clinical phenotypes in the Blacks and Whites. Patients referred for HS between 1984 and 2019 at the Johns Hopkins Hospital were identified using the Pathology Data System (PDS). Clinical and sociodemographic characteristics were extracted and the van der Zee & Jemec HS clinical phenotypes were recovered. RESULTS: A total of 278 patients were identified. Ethnically, 108 (38.8%) were White, and 170 (61.2%) Black. The following HS phenotypes were found: Regular (n=193, 69.4%), scarring folliculitis (n=40, 1.4%), frictional furuncle (11.2%), conglobata (n=9, 3.2%), syndromic (n=3, 1.1%) and ectopic (n=2, 0.7%). No statistically significant ethnic differences in clinical presentation were found. Blacks however had more severe diseases than Whites (p= 0.024 for trend). With multivariate logistic regression analysis, we found that male sex, disease duration, and smoking were independent predictors of regular HS phenotype. Major limitations are the limited number of cases studied and the lack of data regarding response to therapies. CONCLUSIONS: Demographics and phenotypical presentation of HS patients do not seem to be associated with Black ethnicity. However, there is a significant trend for Blacks to present with more Hurley stage 2 and 3 disease compared to White patients. It is speculated that ethnic differences are epiphenomena to social factors, highlighting the broader importance of ethnicity. [ABSTRACT FROM AUTHOR]

OBJECTIVE: Zygomatic implant insertion surgery is a challenging operation. The primary aim of this pilot study was to assess the accuracy of EZgoma® "Inverted Support Technique" for the zygomatic implant-guided surgery. Secondly, any factors which may affect the surgical protocol results, such as implant-prosthetic virtual plan, surgical model matching, intra or post-operative complications, time rate between surgical procedure and prosthetic loading, zygomatic implant survival rate and implant success rate were analyzed. PATIENTS AND METHODS: A total of 20 zygomatic implants were placed in atrophic maxillae of 5 patients. The final position of zygomatic implants after surgery was compared with the pre-operative digitally planned position. The analyzed parameters were zygomatic implants apex and base mean linear distance and zygomatic implants axis mean angular deviation. RESULTS: The comparison was provided by a tridimensional imaging elaboration platform, provided by Geomagic, which allows the overlay of virtual plan STL data with post-operative control CT scan DICOM data. As a result, all the mean values regarding the 20 placed zygomatic implants respected the universally agreed values in guided zygomatic implant surgery: the mean linear distance of the implant platform and of the implant apex were 1.59 mm and 1.62 mm respectively, while the mean angular deviation of the implant axis was equal to 1.74°. One of the patients had mucositis as a post-operative complication. In one patient the anterior wall of the maxillary sinus fractured, and in one zygomatic implant primary stabilization was not achieved. No other complications occurred. CONCLUSIONS: As a conclusion, data obtained from this study suggested that guided zygomatic implant rehabilitation may represent a reliable, efficient, rapid, ergonomie, and safe surgical protocol, however further investigations are needed. [ABSTRACT FROM AUTHOR]

OBJECTIVE: To contribute toward the identification of population-based clinical and histopathological profile of oral squamous cell carcinoma (OSCC), this study was undertaken at the Regional Cancer Centre of Odisha (AHRCC), India. PATIENTS AND METHODS: This retrospective study included all patients diagnosed with OSCC registered at AHRCC, Odisha from 1st January 2015 to 31st December 2018. Demographic, clinical, and pathological data of each patient were retrieved from patient records. Patients with incomplete records were excluded. No postoperative treatment details were collected. RESULTS: The study included 851 cases of OSCC with the mean age of the population found to be 53.8±14.2 years. Male to female ratio was found to be 2.18:1. Gingivobuccal complex was the most common site of OSCC. While 679 patients were reported to undergo incision biopsy only 172 patients underwent excision biopsy in four years. Well differentiation (n=782) is the most common histological grading. The median clinical size of the tumour was 4 cm. Upon analyzing histological parameters in excision specimens lymphovascular and perineural invasion were seen in 38 and 26 cases, respectively. Cervical lymph node metastasis was seen in 42 cases out of 172 excision specimens (24%). 63.23% of cases presented with a depth of invasion between 5 to 10 mm. CONCLUSIONS: This is the largest comprehensive data from the regional cancer center of Odisha population which highlights the demographic, clinical, and histopathological data reported to date. [ABSTRACT FROM AUTHOR]

OBJECTIVE: Optical Coherence Tomography (OCT) is a non-invasive imaging technique that produces cross-sectional images through biological tissues, allowing three-dimensional reconstruction and analysis. Aim was to evaluate if OCT may discriminate among tissues with different bone density and composition, by measuring the depth of light penetration in porcine and rat bone samples. MATERIALS AND METHODS: Two carpal bone samples (2 cm length) were harvested from the porcine forelimb and fixed overnight in 3.7% buffered formal saline. Following fixation, one sample was decalcified in a 1:1 mixture of 8% hydrochloric acid and 8% formic acid solution for three days, with solution changes each day. Samples were imaged using an OCT microscope. Furthermore, the calvaria, ulnar, alveolar and basal bone of mandible of 6 male and 6 female rats were cleared of overlying soft tissues and scanned under OCT. The light penetration depth in each sample was measured using the software Image J, and Scattering Attenuation Microscopy. RESULTS: In the mineralized bone the average depth (µm) and standard deviation (SD) of light penetration were 790.1±18.05 and 410.4±21.7 for periosteal and endosteal surface, respectively, and 507.3±21.03 for cross-section surfaces, while it was 858.4±32.03 for periosteal surface, 1150±26.9 for endosteal, and 627.3±31.8 for cross-section bone surfaces in demineralized porcine bone. There was a significant difference (p<0.001) in depth of light penetration between normal and de-mineralized bone for all regions evaluated. No systematic significant difference in light penetration depth between-gender was found at any site evaluated, while there were variations between sites (p<0.001). The OCT detected differences in bone mineral and porosity among gender (p<0.0001) CONCLUSIONS: This study suggests that OCT may represent a valuable technique to estimate local variations in bone mineral content. [ABSTRACT FROM AUTHOR]

OBJECTIVE: The aim of this study was twofold: (1) to compare soft tissue measurements of the same distances obtained from 3D computed tomography reconstructions with 2D cephalometric radiograms, (2) to compare data from 3D measurements from direct anthropometry and 2D "norms" for the facial measurements. PATIENTS AND METHODS: A total of 40 Caucasian patients that had their CBCT scans for various dental and dentoskeletal reasons were enrolled in this study. All the patients had large field of view (from the forehead to the chin). The data were stored in DICOM format and imported into a software for 3D reconstructions. After 3D facial soft tissue model generation, the distances between 18 soft tissue points were measured. The 3D soft tissue analysis was performed, and the facial indices were calculated. The mean 3D values were compared with 2D measurements performed on lateral cephalograms and Arnett's and Farkas' norms. The measurements were statistically compared using Student's f-test. RESULTS: Assessments from 2D and 3D mea-surements showed no statistical difference except for the distance Pogonion (for both male and female) and Labial superius prominence (females) to the True Vertical Line in 2D /Plane in case of 3D measurements. There was a significant difference between all 3D measurements and Arnett's and anthropometric Farkas' "norms". The mean difference between Farkas' "norms" and 3D measurements was within 3 mm for 70% of measurements. CONCLUSIONS: According to the results, 3D soft tissue analysis allows for complete diagnostic determination. The 3D "norms" are to be verified on a greater sample. [ABSTRACT FROM AUTHOR]

OBJECTIVE: Treacher Collins syndrome (TCS) is a rare congenital disorder of craniofacial development. TCS occurs with an incidence of 1:50,000, and more than 60% of TCS cases have no previous family history and arise as the result of de novo mutations. The high rate of de novo mutations, together with the extreme variability in the degree to which individuals can be affected, makes the provision of genetic counseling extremely complicated. Consequently, every case of TCS is unique and needs to be assessed individually. Patients with TCS frequently undergo multiple reconstructive surgeries from birth through adulthood, which rarely are fully corrective in the long-term. The nascent field of regenerative medicine offers the promise to improve some of these treatments. In particular, structural fat grafting (SFG) seems to be a good strategy not only to restore the normal volume and contour of the face, but also to provide a source of adipose-derived stem cells (ADSCS) with a multilineage differentiation potential. In this work, we present genetical analyses of AD-SC affected by TCS. MATERIALS AND METHODS: ADSCs from were analyzed for their stemness properties and shared many characteristics with those of a healthy subject. Screening of the genome of the TCS patient using array-Comparative Genomic Hybridization allowed us to identify some chromosomal imbalances that are probably associated with TCS. RESULTS: We found that some alterations, involving the TIMELESS gene, were usually associated with embryonic stem cells. CONCLUSIONS: With the aim to improve the final results, we need to consider combining knowledge of genetic alterations and expression profiles as a fundamental step before starting with surgical procedures. [ABSTRACT FROM AUTHOR]

Human papillomavirus (HPV) is considered to be one of the viral infections associated with cancers and other diseases. HPV is detected asymptomatically in the oral mucosa. The presence of human papillomavirus in the oral mucosa appears to be closely associated with a series of benign and malign oral lesions. The aim of this paper is to report the Italian experience in applying translational protocols, using new technologies and multidisciplinary strategies in Human Papilloma virus detection and treatment. The “HPV board: a future without papilloma virus” project was born, promoted by CNEL (Italian Council of Economics and Labor) with the collaboration of numerous scientific societies to commonly approach to public knowledge of HPV-related oral lesions and their clinical management. The preliminary results are related to the assessment of the proof-of-concept of this new project. More in details, “HPV Board” is a project that plans the presence of a working group, made up of otolaryngologists, dentists, oral and maxillofacial surgeons, in close contact with gynecologists, oncologists and pediatricians; this working group manages to combine very transversal skills, in order to promote primary prevention projects, early diagnosis and adequate therapies. The “HPV BOARD” project will give the opportunity to increase the attention of patients and doctors on the early diagnosis of oncological diseases dependent on infection by the infectious agent HPV. In this panorama, dentists will have the role of “first sentinel” of public health because oral health is an indicator, too often overlooked, for the prevention of numerous diseases. [ABSTRACT FROM AUTHOR]

OBJECTIVE: Recently, Zirconia and polyaryletherketone (PEEK) have attracted increasing interest as reliable and safe materials in dental applications, mainly because of their good biomechanical characteristics. The aim of this study was to investigate the response to different loads by prosthetic frameworks for supported fixed partial dentures (FPDs), thus simulating osseointegrated implants. MATERIALS AND METHODS: The specimens were divided into two groups (n= 5 each). Group A: FDPs in zirconia-ceramic; Group B: FDPs in PEEK-composite. These 2 groups were subjected to vertical loads so to evaluate structural deformation; then, they have been analyzed by scanning electron microscopy (SEM) at different magnifications. RESULTS: In tested samples, different types of mechanical failures have been observed. In Zirconia-specimens, chipping is the main failure noticed in this study, mostly in distal margins of the structure. Also, peek-specimens show failure and fracture. CONCLUSIONS: Zirconia and PEEK could be considered both good materials, but several investigations are needed to use these materials as an alternative to metals for fixed partial dentures. [ABSTRACT FROM AUTHOR]

OBJECTIVE: Ascorbyl palmitate is a fat-soluble ester of vitamin C and is used as an antioxidant food additive. While literature reports that ascorbyl palmitate can prevent exacerbation of pain and improve the quality of life of patients suffering from pain, this is not yet supported by clinical trial data. Our study aimed to investigate the effectiveness of ascorbyl palmitate in managing trigeminal neuralgia. PATIENTS AND METHODS: This study was carried out in a single-centre clinical trial in which subjects suffering from trigeminal neuralgia (N=11) were included. All patients were on carbamazepine when first included and, after washout period, received Ascorbyl palmitate. Eligible patients had the most severe trigeminal neuralgia pain in the oral cavity or pain on touching trigger zones, aged 20 years or older, were capable of proper assessment of the severity of pain and their condition, and had experienced multiple episodes of intraoral pain for at least 3 months with a pain intensity of more than 4 points on the numerical rating scale. The Brief Pain Questionnaire was used to evaluate patient’s quality of life. RESULTS: A total of 11 patients were included with a mean age 55.36±10.67 years (7 males, 4 females). Most patients had compression by the superior cerebellar artery and vascular loops upon magnetic resonance examination. The mean numerical rating scale score for carbamazepine after one month was 7.9±0.56 (95% CI 7.49, 8.30). Similarly, for ascorbyl palmitate was 5.5±1.50 (95% CI 4.42, 6.57) (p<0.001). CONCLUSIONS: Ascorbyl palmitate can be used as an adjunct intervention in managing trigeminal neuralgia pain. According to the results, ascorbyl palmitate prevents frequent exacerbation of pain and improves patient quality of life. [ABSTRACT FROM AUTHOR]

OBJECTIVE: COVID-19 toes represent the main dermatological COVID-19 cutaneous manifestation in pediatric patients. Its diagnosis exposes the whole family to social stigma and this aspect was not previously evaluated. PATIENTS AND METHODS: This was a multicenter, case-control, observational study that compared the family impact of COVID-19 toes vs. psoriasis (PsO). We enrolled 46 pediatric patients (23 with psoriasis and 23 with COVID-19 toes, age and gender matched) and their parents/caregivers that had to fill the Dermatitis Family Impact (DFI) questionnaire. RESULTS: DFI index did not differ significantly between both subgroups (p=0.48), and in psoriatic patients did not correlate with both Psoriasis Area Severity Index (PASI) (p=0.59) and itchVAS (p=0.16). CONCLUSIONS: COVID-19 toes, a transitory dermatosis, exerted a similar impact/perturbation on family dynamics than PsO, a well-known stigmatizing, chronic inflammatory dermatosis. [ABSTRACT FROM AUTHOR]

OBJECTIVE: The aim of this study was to evaluate the impact of orthognathic surgery on the patients’ satisfaction and quality of life (QoL) in patients with dental skeletal dysmorphisms and Obstructive Sleep Apnea (OSA). SUBJECTS AND METHODS: Patients were grouped into two cohorts, patients with OSA (G1) and patients with dento-skeletal dysmorphisms (G2). SF-36 questionnaire was obtained from all subjects before interventions. A standardized follow-up protocol, including a second SF-36 questionnaire was planned as at least 6 months after surgery. The impact of surgery on satisfaction was evaluated by post-operative patient satisfaction-based survey. RESULTS: 61 patients were included as: 21 OSA (G1), 12 Class II (G2-a) and 28 Class III (G2-b) patients. The mean post-operative follow-up was 65.47±26.36 months. In the SF-36 results, when pre and post operative surveys were compared, the quality of life increased significantly for G1 in all items except for body pain. In G2, when pre and post operative surveys were compared, the quality of life increased significantly in items related to emotional well-being, health transition, role limitations due to emotional problems, while other parameters did not significantly change. When groups were compared, there was no difference among them except for physical functioning which was improved for OSA patients. According to the Rustemeyer results, overall post-operative satisfaction score was 84.92±14.72%. There was a significant difference for patient satisfaction considering facial aesthetics in both groups. For chewing function there was no difference for patient satisfaction in G1, but there was a significant difference in G2 patients. CONCLUSIONS: Orthognathic surgery seems to be beneficial in terms of patients’ satisfaction and patients’ satisfaction for both dental skeletal dysmorphism and OSA patients. [ABSTRACT FROM AUTHOR]

OBJECTIVE: The objective of the study was to evaluate the results and immediate postoperative complications following open reduction and internal fixation of mandibular fractures with or without postoperative maxillo-mandibular fixation MATERIALS AND METHODS: The study spanned over a period of 24 months, extending from October 2015 to October 2017. The study sample comprised 24 subjects between the age range of 18 to 65 years. They were randomly divided into two groups: Group A included subjects in whom open reduction and internal fixation was followed by maxilla-mandibular fixation for 15 days, and Group B subjects in whom only open reduction and internal fixation was done, followed by immediate mobilization. The outcomes evaluated were swelling, pain, simplified oral hygiene index and occlusion. The subjects were followed for all these outcomes on 1st, 7th and 15th days. The occlusion was assessed for 5 days. Any other intra/post-operative complications were additionally noted. RESULTS: There was no statistical difference between the groups for swelling, pain and occlusion. The patients with postoperative maxilla-mandibular fixation had poorer oral hygiene when compared to the other group (p<0.001). CONCLUSIONS: The use of maxilla-mandibular fixation post open reduction and internal fixation seems to offer no additional benefits to the patients. According to the results of the study, this traditional surgical dictum seems to be used by the surgeons due to the lack of any scientific evidence. However, further studies should be conducted to confirm this statement. [ABSTRACT FROM AUTHOR]

OBJECTIVE: Reconstruction after radical cancer surgery in terms of function and esthetics can be quite demanding. The aim of this study was to evaluate oral rehabilitation with autogenous flaps and dental implants for maxillofacial reconstruction in oncologic patients after implant insertions. MATERIALS AND METHODS: The study consisted of 19 patients diagnosed with either squamous cell carcinoma, fusocellular carcinoma, or mucoepidermoid carcinoma. The reconstruction of the maxillofacial defects was done with autogenous flaps (free fibular flap, antero-lateral thigh flap, radial forearm flap, or rotational pedicled temporal muscle flap). Implants were inserted on the average 32.03±19.51 months after reconstructive operations. A total of 82 implants were inserted. Mean follow-up after maxillo-facial surgery was 7.2 years (mean 86.56±22.04 months). Mean follow-up after implant insertions was 4.5 years (mean 54.6±21.82). Primary outcome was implant survival. Secondary outcome was evaluation of post-surgical complications. RESULTS: There were surgical revisions in seven patients after reconstructive surgery with flaps, mainly due to tumor relapse. Complications were seen in 11 patients. There was one implant failure. Overall implant survival rate was 98.8%. No relations were found between implant survival rate and gender, type of tumor, type of microvascular free flap, radiation therapy, chemotherapy, and prosthesis type. CONCLUSIONS: According to the results of this study, oral rehabilitation with dental implants inserted in free flaps for maxillofacial reconstruction after ablative oncologic surgery can be considered as a safe treatment modality with successful outcomes. [ABSTRACT FROM AUTHOR]

OBJECTIVE: This case report represents a solitary fibrous tumor, which is a very rare neoplasm in the parotid gland. CASE PRESENTATION: 80-year-old Caucasian female patient with palpable, immobile, painless, slow growing, semi-rigid-elastic neoplasm in the left parotid gland, that was existing for four months. There were no signs of inflammation and facial paralysis. The tumor was initially interpreted as a salivary gland neoplasm of uncertain origin. Fine needle aspiration was performed 2 times; however, the precise diagnosis was challenging. The tumor was excised, regional lymphadenectomy was performed. Morphological and immunophenotypical findings were consistent with solitary fibrous tumor of parotid gland. Currently, the patient is under regular follow-up period at 9 months with no evidence of metastasis or recurrence. CONCLUSIONS: Although very rare, solitary fibrous tumor (SFT) should be suspected in cases of slow growing, solid, well-defined nodules of the parotid gland. The SFT of the parotid gland are usually benign tumors, however there is a low risk of recurrency and malignant behavior with metastatic potential. Complete resection of the tumor should be performed since it is crucial for management without any recurrence. [ABSTRACT FROM AUTHOR]

OBJECTIVE: The aim of this retrospective case series report was to evaluate the results of oral rehabilitation with extra-sinus zygomatic implant surgery with a minimum follow-up of 7.5 years. PATIENTS AND METHODS: A total of 35 patients with 87 zygomatic implants were included. The mean follow-up period of the patients was 93 months. The zygomatic implant survival and complications were evaluated as criteria for success. RESULTS: There were no implant failures. Overall success rate without complications for zygomatic implant was 88.5%. Complications developed in 4 patients (1 cutaneous fistula and 3 mucositis). According to the results on an implant basis, patients with previously failed conventional implants had greater probability of complications. Patients with quad zygomatic implants had higher incidence of complications than those with two zygomatic implants. Fully threaded implant design was associated with higher incidence of mucositis than partially threaded design. No relation was found between implant success and smoking, prosthesis type, and antagonist dentition. When conducting the analysis using the patient as unit, only the antagonist dentition showed significant difference, the worst outcome being associated with the Toronto resin prosthesis. CONCLUSIONS: Zygomatic implants can be considered as a safe alternative to conventional implant insertions and bone grafting procedures in oral rehabilitation of patients with severely atrophic maxillary bone. [ABSTRACT FROM AUTHOR]

OBJECTIVE: Temporomandibular joint reconstructive surgery in a growing patient represents a challenging situation. Autogenous and alloplastic reconstructive options are being studied in literature; however, there are still some limitations. The objective of this case report is to evaluate a novel custom-made prosthetic system in a 12-year-old TMJ ankylosis patient. CASE PRESENTATION: The patient had complaints of temporomandibular joint ankylosis and hypoplasia. The patient had already been operated two times with autogenous grafts. Swelling and tumefaction were apparent on the right side of the face. Mouth opening was 1.5 centimeters, with limitations in lateral and protrusive movements of the jaws. Hypertonic muscles and pain upon palpation were registered. There were no signs of luxation, fracture, or traumatic avulsion. After examination, unilateral TMJ ankylosis was apparent on TC scans. Revision surgery was planned with the use of true plastic temporomandibular joint customized prosthesis. The patient underwent a TMJ reconstruction surgery using CADCAM custom-made patient specific prosthesis. The follow up period of this patient was 46 months and showed successful healing with no complications. CONCLUSIONS: Replacement of TMJ with custom made alloplastic material that is reported can be considered as a safe and useful option for growing young individuals in selected cases. [ABSTRACT FROM AUTHOR]

Many studies show that surgical hernia repair with the use of prosthetic meshes can result in pain, hernia recurrence, contraction and mesh rupture. Numerous experimental studies have been conducted to understand the effect of mesh stiffness, pore size and mesh patterns on mesh biocompatibility. The purpose of this mini review is to present an overview of the contracture, adhesion, tissue regrowth and histological response characteristics of permanent and absorbable mesh. Indeed, the mechanics of mesh-human tissue interaction is poorly understood in the literature. It has been shown that early integration of biological meshes is critical for sustained hernia repair. One of the emerging experimental approaches is to combine cell-based regenerative medicine with mesh materials. Studies in preclinical models show that the use of synthetic and biological meshes with autologous cell implantation improves the biocompatibility of biomaterials, promoting key tissue regeneration processes such as adhesion and vascularisation. [ABSTRACT FROM AUTHOR]

OBJECTIVE: A hernia of the abdominal wall is an opening of the muscles in the abdominal wall, which is frequently treated via the application of a surgical mesh. The purpose of this research is to study how human adipose-derived stem cells (hADSCs) interact with Phasix™ Mesh, a commercially available mesh for hernia repair. Studying how cells derived from the abdominal region behave with Phasix™ Mesh is crucial to improve the state of the art of current surgery and achieve effective tissue restoration. MATERIALS AND METHODS: hADSCs were seeded onto Phasix™ Mesh, a fully resorbable surgical mesh of poly (4-hydroxybutyric acid) (P4HB). Cell viability was assessed through MTT assay, and cell growth and adhesion were evaluated via multiple imaging techniques and gene imaging profiling. RESULTS: Results confirm that the nets support cells proliferation, extracellular matrix production and increasing of angiogenetic factor. CONCLUSIONS: Butyric acid-based nets are promising scaffolds for abdominal wall reconstruction. [ABSTRACT FROM AUTHOR]

Additive manufacturing (AM) has increasing applications in medicine in recent times. This technology has emerged in cardiovascular medicine as an intelligent system for the improvement of medical devices, the preparation of patient-specific models, and the prototyping of grafts. This review traces the research and development in the production of surgical guides and synthetic grafts for cardiac and vascular applications over the last few years. It also traces the recent widespread use of 3D-printed specific-patient models for cardiovascular surgical interventions. A current view of AM strategies, materials and solutions to improve cardiovascular patient outcomes is also provided. [ABSTRACT FROM AUTHOR]