Search

Purpose: A hybrid pedicle screw system for minimally invasive spinal fixation was developed based on the uniplanar pedicle screw construct and a new intermediate screw. Its biomechanical performance was evaluated using finite element (FE) analysis., Methods: A T12-L2 FE model was established to simulate the L1 vertebral compression fracture with Magerl classification A1.2. Six fixation models were developed to simulate the posterior pedicle screw fracture fixation, which were divided into two subgroups with different construct configurations: (1) six-monoaxial/uniplanar/polyaxial pedicle screw constructs and (2) four-monoaxial/uniplanar/polyaxial pedicle screw constructs with the new intermediate screw. After model validation, flexion, extension, lateral bending, and axial rotation with 7.5 Nm moments and preloading of 500 N vertical compression were applied to the FE models to compare the biomechanical performances of the six fixation models with maximum von Mises stress, range of motion, and maximum displacement of the vertebra., Results: Under four loading scenarios, the maximum von Mises stresses were found to be at the roots of the upper or lower pedicle screws. In the cases of flexion, lateral bending, and axial rotation, the maximum von Mises stress of the uniplanar screw construct lay in between the monoaxial and polyaxial screw constructs in each subgroup. Considering lateral bending, the uniplanar screw construct enabled to lower the maximum von Mises stress than monoaxial and polyaxial pedicle screw constructs in each subgroup. Two subgroups showed comparable results of the maximum von Mises stress on the endplates, range of motion of T12-L1, and maximum displacement of T12 between the corresponding constructs with the new intermediate screw or not., Conclusions: The observations shown in this study verified that the hybrid uniplanar pedicle screw system exhibited comparable biomechanical performance as compared with other posterior short-segment constructs. The potential advantage of this new fixation system may provide researchers and clinical practitioners an alternative for minimally invasive spinal fixation with vertebral augmentation., Competing Interests: The authors declare that they have no conflicts of interest. The authors declare that they have a submitted Chinese patent named as “A hybrid uniplanar pedicle screw system for minimally invasive spinal fixation with the vertebral augmentation”., (Copyright © 2020 Jia Li et al.)

Objective: Tissue engineering of the larynx requires a complex, multiple tissue layer design. Additionally, spontaneous reinnervation of the larynx after recurrent laryngeal nerve (RLN) injury is often disorganized, resulting in subpar function. This study investigates use of tissue-engineered cartilage and motor endplate-expressing (MEE) tissue-engineered skeletal muscle implants for laryngeal reconstruction and the promotion of organized reinnervation after RLN injury., Methods: F344 rat primary muscle progenitor cells (MPCs) were isolated. Three-dimensional muscle constructs were created by encapsulating MPCs in type I oligomeric collagen under passive tension. Constructs were then cultured in differentiation medium (MPC control constructs) or induced to form motor endplates (MEE constructs) with neurotrophic agents. Three-dimensional cartilage constructs were created with adipose stem cells differentiated in chondrocyte medium. The muscle and cartilage constructs were implanted into surgically created myochondral defects in the F344 rat larynx with injured or intact (control) RLN. At 1-, 3-, and 6-month timepoints, videolaryngoscopy, electromyography (EMG), histology, and immunohistochemistry were used to assess outcomes., Results: At all timepoints, cartilage-muscle implants were well integrated into host tissue. Functionally, there was increased vocal fold adduction and EMG activity in nerve-injured rats treated with the MEE constructs when compared to those treated with the MPC control constructs. Motor endplate-expressing constructs had increased myofiber cross-sectional area compared to MPC control constructs., Conclusion: Although our laboratory previously demonstrated that muscle and cartilage constructs could be used separately for hemilaryngeal reconstruction, this study suggests combining them with the modification of MEEs rather than MPCs, resulting in improved muscle recovery after recurrent laryngeal nerve injury., Level of Evidence: NA Laryngoscope, 129:1293-1300, 2019., (© 2018 The American Laryngological, Rhinological and Otological Society, Inc.)

Study Design: Anatomic study using computed tomographic scans., Objective: The purpose of this paper was to determine the trajectory of pedicle screw insertions, in regard to posterior bony landmarks encountered during standard posterior exposure of the spine between the seventh cervical (C7) and the fifth thoracic (T5) vertebrae, when lateral fluoroscopic and radiographic guidance may be obstructed by the scapula and shoulders., Summary of Background Data: Only a few studies have evaluated the intraoperative sagittal trajectory of pedicle screw insertion., Materials and Methods: We assessed 64 participants of a health screening program using whole-spine computed tomographic scans. On the basis of 5 previously reported methods, we designed 3 freehand trajectories: lamina surface method (angle between the superior vertebral endplate and the surface of the lamina), spinous process method (angle between the superior vertebral endplate and a line connecting the tips of the index spinous process and the one cephalad to it), and facet tilt method (angle between the superior endplate and the superior facet tilt). We calculated each of the angles for the C7-T5 vertebrae and determined the most reliable method using coefficients of variation (CV) and intraobserver and interobserver reliability., Results: The lamina surface method had the smallest CVs for C7 and T1, and the mean angles were larger than 90 degrees (range, 94.7-102.4 degrees). The spinous process method had the smallest CVs between T2 and T5, and the mean angles were <90 degrees (range, 85.0-87.0 degrees). The intraobserver and interobserver reliabilities were good or excellent for both methods., Conclusions: The ideal sagittal trajectories for pedicle screw insertion are nearly orthogonal to the lamina surface or the line connecting the spinous processes, but were different for each of the vertebrae. The lamina surface method was the most reliable for C7 and T1, whereas the spinous process method was most reliable between T2 and T5., Level of Evidence: Level III.

Study Design: Pilot single-centre, stratified, prospective, randomized, double-blinded, parallel-group, controlled study., Objective: To determine whether vertebral end-plate perforation after lumbar discectomy causes annulus reparation and intervertebral disc volume restoration. To determine that after 6 months there would be no clinical differences between the control and study group., Summary of Background Data: Low back pain is the most common long-term complication after lumbar discectomy. It is mainly caused by intervertebral disc space loss, which promotes progressive degeneration. This is the first study to test the efficiency of a previously described method (vertebral end-plate perforation) that should advocate for annulus fibrosus reparation and disc space restoration., Methods: We selected 30 eligible patients according to inclusion and exclusion criteria and randomly assigned them to the control (no end-plate perforation) or study (end-plate perforation) group. Each patient was evaluated in 5 different periods, where data were collected [preoperative and 6-mo follow-up magnetic resonance imaging and functional outcome data: visual analogue scale (VAS) back, VAS legs, Oswestry disability index (ODI)]. Intervertebral space volume (ISV) and height (ISH) were measured form the magnetic resonance images. Statistical analysis was performed using paired t test and linear regression. P<0.05 was considered statistically significant., Results: We found no statistically significant difference between the control group and the study group concerning ISV (P=0.6808) and ISH (P=0.8981) 6 months after surgery. No statistically significant differences were found between ODI, VAS back, and VAS legs after 6 months between the 2 groups, however, there were statistically significant differences between these parameters in different time periods. Correlation between the volume of disc tissue removed and preoperative versus postoperative difference in ISV was statistically significant (P=0.0020)., Conclusions: The present study showed positive correlation between the volume of removed disc tissue and decrease in postoperative ISV and ISH. There were no statistically significant differences in ISV and ISH between the group with end-plate perforation and the control group 6 months after lumbar discectomy. Clinical outcome and disability were significantly improved in both groups 3 and 6 months after surgery.

Introduction: Motor endplate reinnervation is critical for restoring motor function of the denervated muscle. We developed a novel surgical technique called nerve-muscle-endplate band grafting (NMEG) for muscle reinnervation., Methods: Experimentally denervated sternomastoid muscle in the rat was reinnervated by transferring a NMEG from the ipsilateral sternohyoid muscle to the native motor zone (NMZ) of the target muscle. A NMEG pedicle contained a block of muscle (~ 6 × 6 × 3 mm), a nerve branch with axon terminals, and a motor endplate band with numerous neuromuscular junctions. At 3 months after surgery, maximal tetanic muscle force measurement, muscle mass and myofiber morphology, motoneurons, regenerated axons, and axon-endplate connections of the muscles were analyzed., Results: The mean force of the reinnervated muscles was 82% of the contralateral controls. The average weight of the treated muscles was 89% of the controls. The reinnervated muscles exhibited extensive axonal regeneration. Specifically, the mean count of the regenerated axons in the reinnervated muscles reached up to 76.8% of the controls. The majority (80%) of the denervated endplates in the target muscle regained motor innervation., Conclusions: The NMZ of the denervated muscle is an ideal site for NMEG implantation and for the development of new microsurgical and therapeutic strategies to achieve sufficient axonal regeneration, rapid endplate reinnervation, and optimal functional recovery. NMEG-NMZ technique may become a useful tool in the treatment of muscle paralysis caused by peripheral nerve injuries in certain clinical situations.

Background: This study was designed to determine the correlation between functional recovery and the extent of axonal regeneration after muscle reinnervation with our recently developed nerve-muscle-endplate band grafting (NMEG) technique in a rat model., Materials and Methods: The right experimentally paralyzed sternomastoid (SM) muscle by nerve transection was immediately reinnervated with an NMEG pedicle harvested from a neighboring sternohyoid muscle. The NMEG pedicle contained a muscle block (6 × 6 × 3 mm), a donor nerve branch with nerve terminals, and a motor endplate band. Three months after surgery, the tetanic force of the SM muscle was measured and the regenerated axons in the muscle were detected using neurofilament immunohistochemistry., Results: The results showed that the maximal tetanic force (a measure of muscle functional recovery) of the NMEG-reinnervated SM muscle reached up to 66.0% of the normal control. The wet weight of the reinnervated SM muscle (a measure of muscle mass recovery) was 87.2% of the control. The area fraction of the regenerating axons visualized with neurofilament staining within the NMEG-reinnervated SM muscle (a measure of muscle reinnervation) was 42.3%. A positive correlation was revealed between the extent of muscle reinnervation and maximal muscle force., Conclusions: Our newly developed NMEG technique results in satisfactory functional outcomes and nerve regeneration. Further improvement in the functional recovery after NMEG reinnervation could be achieved by refining the surgical procedure and creating an ideal environment that favors axon-endplate connections and accelerates axonal growth and sprouting., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Background: Because of poor functional outcomes of currently used reinnervation methods, we developed novel treatment strategy for the restoration of paralyzed muscles-the nerve-muscle-endplate band grafting (NMEG) technique. The graft was obtained from the sternohyoid muscle (donor) and implanted into the ipsilateral paralyzed sternomastoid (SM) muscle (recipient)., Methods: Rats were subjected to immediate or delayed (1 or 3 mo) reinnervation of the experimentally paralyzed SM muscles using the NMEG technique or the conventionally used nerve end-to-end anastomosis. The SM muscle at the opposite side served as a normal control., Results: NMEG produced better recovery of muscle force as compared with end-to-end anastomosis. A larger force produced by NMEG was most evident for small stimulation currents., Conclusions: The NMEG technique holds great potential for successful muscle reinnervation. We hypothesize that even better muscle reinnervation and functional recovery could be achieved with further improvement of the environment that favors axon-end plate connections and accelerates axonal growth and sprouting., (Copyright © 2013 Elsevier Inc. All rights reserved.)

Background: Using the rat facial nerve axotomy model, the authors recently showed that manual stimulation of denervated whiskerpad muscles reduced the posttransectional polyinnervation at the neuromuscular junctions and promoted full recovery of vibrissal whisking., Objective: Prompted by implications for rehabilitation therapy, the authors examined whether manual stimulation of denervated supra- and infrahyoid muscles would also improve recovery after unilateral lesion on the hypoglossal nerve., Methods: Adult rats underwent transection of the right hypoglossal nerve. Half of the animals received no postoperative treatment, and the other half were subjected to daily manual stimulation of the suprahyoid/sublingual region for 2 months. Recovery was assessed by measuring the angle of tongue-tip deviation from the midline, degree of collateral axonal branching at the lesion site (counts after retrograde labeling with 2 fluorescent dyes), synaptic input to the hypoglossal motoneurons using synaptophysin immunocytochemistry, tongue-muscles motor representation in the cerebral cortex after c-Fos immunocytochemistry, and portion of polyinnervated neuromuscular junctions., Results: In animals receiving manual stimulation, the tongue-tip deviation was 37.0 +/- 49.37 degrees , whereas values in control nonstimulated rats were significantly higher (50.1 +/- 9.01 degrees ; P < .05; mean +/- SD). Improved recovery was not associated with reduced collateral axonal branching; there were also no differences in tongue-muscles representation in the motor cortex. However, manual stimulation restored the total synaptic input to levels in intact animals and reduced the proportion of polyinnervated neuromuscular junctions compared with nonstimulated animals., Conclusion: The data show that manual stimulation of denervated muscles improves functional outcome following peripheral nerve injury. This suggests immediate potential for enhancing clinical rehabilitation strategies.

The motor nerve transplantation (MNT) technique is used to transfer an intact nerve into a denervated muscle by harvesting a neurovascular pedicle of muscle containing motor endplates from the motor endplate zone of a donor muscle and implanting it into a denervated muscle. Thirty-six adult New Zealand White rabbits underwent reinnervation of the left long peroneal (LP) muscle (fast twitch) with a motor nerve graft from the soleus muscle (slow twitch). The right LP muscle served as a control. Reinnervation was assessed using microstimulatory single-fiber electromyography (SFEMG), alterations in muscle fiber typing and grouping, and isometric response curves. Neurofilament antibody was used for axon staining. The neurofilament studies provided direct evidence of nerve growth from the motor nerve graft into the adjacent denervated muscle. Median motor endplate jitter was 13 microsec preoperatively, and 26 microsec at 2 months, 29.5 microsec at 4 months, and 14 microsec at 6 months postoperatively (p < 0.001). Isometric tetanic tension studies showed a progressive functional recovery in the reinnervated muscle over 6 months. There was no histological evidence of aberrant reinnervation from any source outside the nerve pedicle. Isometric twitch responses and adenosine triphosphatase studies confirmed the conversion of the reinnervated LP muscle to a slow-type muscle. Acetylcholinesterase studies confirmed the presence of functioning motor endplates beneath the insertion of the motor nerve graft. It is concluded that the MNT technique achieves motor reinnervation by growth of new nerve fibers across the pedicle graft into the recipient muscle.

Twenty-five Wistar rats and five dogs were used in this study. The common peroneal nerve connected with a segment of nerve graft was divided into fascicles or subfascicles and then inserted into the superficial muscular fibers of the lateral head of the gastrocnemius. The motor nerve supplying this muscle was deliberately cut away during the operation. Electrograms muscular strength, optic and electron-microscopic, and histochemical examinations were studied 2 to 12 months postoperatively. New motor end plates and good muscular activity of the neurotized lateral head of the denervated gastrocnemius were demonstrated. This experimental result is useful for clinical applications of the method.