Search

A compact, reconfigurable antenna supporting multiple wireless services with a minimum number of switches is found lacking in literature and the same became the focus and outcome of this work. It was achieved by designing a Th-Shaped frequency reconfigurable multi-band microstrip planar antenna, based on use of a single switch within the radiating structure of the antenna. Three frequency bands (i.e., 2007-2501 MHz, 3660-3983MHz and 9341-1046 MHz) can be operated with the switch in the ON switch state. In the OFF state of the switch, the antenna operates within the 2577-3280MHz and 9379-1033MHz Bands. The proposed antenna shows an acceptable input impedance match with Voltage Standing Wave Ratio (VSWR) less than 1.2. The peak radiation efficiency of the antenna is 82%. A reasonable gain is obtained from 1.22 to 3.31 dB within the operating bands is achieved. The proposed antenna supports UniversalMobile Telecommunication System (UMTS)-1920 to 2170 MHz, Worldwide Interoperability and Microwave Access (WiMAX)/Wireless Broadband/(Long Term Evolution) LTE2500-2500 to 2690 MHz, Fifth Generation (5G)-2500/3500 MHz, Wireless Fidelity (Wi-Fi)/Bluetooth-2400 to 2480 MHz, and Satellite communication applications in X-Band-8000 to 12000 MHz. The overall planar dimension of the proposed antenna is 40×20mm2. The antennawas designed, along with the parametric study, using Electromagnetic (EM) simulation tool. The antenna prototype is fabricated for experimental validation with the simulated results. The proposed antenna is low profile, tunable, lightweight, cheap to fabricate and highly efficient and hence is deemed suitable for use in modern wireless communication electronic devices. [ABSTRACT FROM AUTHOR]

Summary: A two‐port multiple‐input‐multiple‐output (MIMO) antenna system operating in the mm‐wave band for 5G applications is presented. The two elements of MIMO structure are separated from each other by 19 mm (1.9 λ) and excited by microstrip feed. The MIMO elements are circular patches with round cuts at the edges to improve impedance bandwidth. Quadrilateral slot in the ground plane is designed to improve the radiation characteristics of the radiating element having size 18 ×19× 0.8 mm3. The MIMO design is simulated through CST. The proposed antenna works in 27–29 GHz range, providing a potential bandwidth of 2 GHz. Furthermore a gain is improved from 8.2 to 8.75 dB and efficiency increase from 85% to 88% and high isolation of 64 dB is achieved by placing 4‐elements of metamaterial with size 4.5 × 18 mm2 in the middle of two circular monopole antennas. The metamaterial gives us a band stop response and act as decoupler and enhance the isolation to reduce mutual coupling. By analyzing the radiation characteristics of the proposed design, in term of reflection coefficient, surface currents, reduced mutual coupling, suitable gain, envelope correlation coefficient (ECC), diversity gain (DG) and radiation pattern, the recommended antenna can be considered a good candidate for 5G applications. [ABSTRACT FROM AUTHOR]

Abstract Background In this paper we are reporting one case of exsanguinating upper gastrointestinal tract (GIT) bleed requiring massive blood transfusion and immediate life saving surgery. Case presentation A 30 years old female, 12 weeks pregnant was referred to our hospital from the earth-quake affected area of Kashmir with history of upper abdominal pain, haematemesis and melaena for one week. After stabilizing the patient, upper gastro-intestinal endoscopy was performed. It revealed gastric ulcer just distal to the gastro-esophageal junction on the lesser curvature. Biopsy from the ulcer edge led to profuse spurting of the blood and patient went into state of shock. Immediate resuscitation led to rebleeding and recurrence of post haemorrahagic shock. Conclusion The patient was immediately explored and total gastrectectomy with splenectomy concluded as life saving procedure. A review of literature was conducted to make this report possible.

Technologies and services towards smart-vehicles and Intelligent-Transportation-Systems (ITS), continues to revolutionize many aspects of human life. This paper presents a detailed survey of current techniques and advancements in Automatic-Number-Plate-Recognition (ANPR) systems, with a comprehensive performance comparison of various real-time tested and simulated algorithms, including those involving computer vision (CV). ANPR technology has the ability to detect and recognize vehicles by their number-plates using recognition techniques. Even with the best algorithms, a successful ANPR system deployment may require additional hardware to maximize its accuracy. The number plate condition, non-standardized formats, complex scenes, camera quality, camera mount position, tolerance to distortion, motion-blur, contrast problems, reflections, processing and memory limitations, environmental conditions, indoor/outdoor or day/night shots, software-tools or other hardware-based constraint may undermine its performance. This inconsistency, challenging environments and other complexities make ANPR an interesting field for researchers. The Internet-of-Things is beginning to shape future of many industries and is paving new ways for ITS. ANPR can be well utilized by integrating with RFID-systems, GPS, Android platforms and other similar technologies. Deep-Learning techniques are widely utilized in CV field for better detection rates. This research aims to advance the state-of-knowledge in ITS (ANPR) built on CV algorithms; by citing relevant prior work, analyzing and presenting a survey of extraction, segmentation and recognition techniques whilst providing guidelines on future trends in this area. [ABSTRACT FROM AUTHOR]

A low-profile frequency reconfigurable monopole antenna operating in the microwave frequency band is presented in this paper. The proposed structure is printed on Flame Retardant-4 (FR-4) substrate having relative permittivity of 4.3 and tangent loss of 0.025. Four pin diode switches are inserted between radiating patches for switching the various operating modes of an antenna. The proposed antenna operates in five modes, covering nine different bands by operating at single bands of 5 and 3.5 GHz in Mode 1 and Mode 2, dual bands (i.e., 2.6 and 6.5 GHz, 2.1 and 5.6 GHz) in Mode 3 and 4 and triple bands in Mode 5 (i.e., 1.8, 4.8, and 6.4 GHz). The Voltage Standing Waves Ratio (VSWR) of the presented antenna is less than 1.5 for all the operating bands. The efficiency of the designed antenna is 84 % and gain ranges from 1.2 to 3.6 dBi, respectively, at corresponding resonant frequencies. The achieve bandwidths at respective frequencies ranges from 10.5 to 28%. The proposed structure is modeled in Computer Simulation Technology microwave studio (CST MWS) and the simulated results are experimentally validated. Due to its reasonably small size and support for multiple wireless standards, the proposed antenna can be used in modern handheld fifth generation (5G) devices as well as Internet of Things (IoT) enabled systems in smart cities. [ABSTRACT FROM AUTHOR]

Objective: To describe the pattern of mine blast limb injuries in civilian population of Kashmir, to evaluate the outcome of tissue sparing surgical intervention in these injuries and to determine the sensitivity of hand-held percutaneous Doppler for tissue viability., Design: Descriptive study., Place and Duration of Study: Combined Military Hospital, Muzaffarabad and Islamic International Medical College Hospitals at Rawalpindi/Islamabad from November 1997 to May 2005., Patients and Methods: One hundred and three patients who sustained mine blast injuries to upper or lower limbs, along side the line of control between the Indian-held Kashmir and Azad Kashmir, regardless of age and gender, were included in this study. Patients who already had amputation after injury at some other place were excluded. All patients were initially managed in emergency and had more than one surgical intervention. Transcutaneous Doppler was used to evaluate the vascularity of the remaining tissue. All patients were operated under spinal or general anaesthesia and had repeated debridements followed by skin cover by split skin graft, full thickness skin graft or rotational flaps. Every patient received at least 5 days course of antibiotics and tetanus prophylaxis. Postoperative rehabilitation and follow-up was conducted for at least 6 months after discharge from the hospital., Results: Mean age of victims in this study was 22 years. Out of 103 patients, 72 (69.9%) received initial wound care in the peripheral primary health care centre but were not amputated while 31 patients (30%) were just dressed and referred for further treatment at tertiary care hospitals. Eighty-five patients (82.5%), out of the total, had some sort of traumatic amputation at presentation due to the original injury. That included loss of limb below knee in 19 (18.45%) patients, at distal tibiofibular region in 13 (12.6%), mid tarsal amputations in 39(37.9%), and hemi foot amputation in 15 (14.6%) patients. Nine (8.7%) patients had losses of two or less than two toes, 1 (0.97%) patient had injury at mid palmer region, and 5 (4.9%) patients had 2 fingers traumatic amputation. Eighteen (17.5%) patients had soft tissue ( with or without bony injury) injury only without any actual traumatic amputation. Infection rate was 27% in patients who did not have wound care in the periphery. Those who had wound toilet in-the peripheral hospital had infection rate of 16%. Two patients developed fulminating multi-resistant progressive infection requiring below knee amputation., Conclusion: Conservative wound debridement and early skin coverage by different means and preserving maximum soft tissues and bone results in functionally and cosmetically better limb in victims of land mine.