Search

The turbulent ionosphere causes phase shifts to incoming radio waves on a broad range of temporal and spatial scales. When an interferometer is not sufficiently calibrated for the direction-dependent ionospheric effects, the time-varying phase shifts can cause the signal to decorrelate. The ionosphere's influence over various spatiotemporal scales introduces a baseline-dependent effect on the interferometric array. We study the impact of baseline-dependent decorrelation on high-redshift observations with the Low Frequency Array (LOFAR). Datasets with a range of ionospheric corruptions are simulated using a thin-screen ionosphere model, and calibrated using the state-of-the-art LOFAR Epoch of Reionisation pipeline. For the first time ever, we show the ionospheric impact on various stages of the calibration process including an analysis of the transfer of gain errors from longer to shorter baselines using realistic end-to-end simulations. We find that direction-dependent calibration for source subtraction leaves excess power of up to two orders of magnitude above the thermal noise at the largest spectral scales in the cylindrically averaged auto-power spectrum under normal ionospheric conditions. However, we demonstrate that this excess power can be removed through Gaussian process regression, leaving no excess power above the ten per cent level for a $5~$km diffractive scale. We conclude that ionospheric errors, in the absence of interactions with other aggravating effects, do not constitute a dominant component in the excess power observed in LOFAR Epoch of Reionisation observations of the North Celestial Pole. Future work should therefore focus on less spectrally smooth effects, such as beam modelling errors., Comment: 22 pages, 20 figures. Accepted for publication in Monthly Notices of the Royal Astronomical Society (MNRAS)

Current radio interferometers output multi-petabyte-scale volumes of data per year making the storage, transfer, and processing of this data a sizeable challenge. This challenge is expected to grow with the next-generation telescopes such as the Square Kilometre Array. Lossy compression of interferometric data post-correlation can abate this challenge. However, since high-redshift 21-cm studies impose strict precision requirements, the impact of such lossy data compression on the 21-cm signal power spectrum statistic should be understood. We apply Dysco visibility compression, a technique to normalize and quantize specifically designed for radio interferometric data. We establish the level of the compression noise in the power spectrum in comparison to the thermal noise as well as its coherency behavior. Finally, for optimal compression results, we compare the compression noise obtained from different compression settings to a nominal 21-cm signal power. From a single night of observation, we find that the noise introduced due to the compression is more than five orders of magnitude lower than the thermal noise level in the power spectrum. The noise does not affect calibration. The compression noise shows no correlation with the sky signal and has no measurable coherent component. The level of compression error in the power spectrum ultimately depends on the compression settings. Dysco visibility compression is found to be of insignificant concern for 21-cm power spectrum studies. Hence, data volumes can be safely reduced by factors of $\sim 4$ and with insignificant bias to the final power spectrum. Data from SKA-low will likely be compressible by the same factor as LOFAR, owing to the similarities of the two instruments. The same technique can be used to compress data from other telescopes, but a small adjustment of the compression parameters might be required., Comment: 12 pages, 9 figures, and 3 tables; submitted to Astronomy and Astrophysics (A&A)

One of the main obstacles preventing the detection of the redshifted 21-cm signal from neutral hydrogen in the early Universe is the astrophysical foreground emission, which is several orders of magnitude brighter than the signal. The foregrounds, due to their smooth spectra, are expected to predominantly occupy a region in the cylindrical power spectrum known as the foreground wedge. However, the conventional equations describing the extent of the foreground wedge are derived under a flat-sky approximation. This assumption breaks down for tracking wide-field instruments, thus rendering these equations inapplicable in these situations. In this paper, we derive equations for the full sky foreground wedge and show that the foregrounds can potentially extend far beyond what the conventional equations suggest. We also derive the equations that describe a specific bright source in the cylindrical power spectrum space. The validity of both sets of equations is tested against numerical simulations. Many current and upcoming interferometers (e.g., LOFAR, NenuFAR, MWA, SKA) are wide-field phase-tracking instruments. These equations give us new insights into the nature of foreground contamination in the cylindrical power spectra estimated using wide-field instruments. Additionally, they allow us to accurately associate features in the power spectrum to foregrounds or instrumental effects. The equations are also important for correctly selecting the "EoR window" for foreground avoidance analyses, and for planning 21-cm observations. In future analyses, it is recommended to use these updated horizon lines to indicate the foreground wedge in the cylindrical power spectrum accurately. The new equations for generating the updated wedge lines are made available in a Python library, pslines., Comment: 21 pages, 13 figures, and 2 tables; submitted to Astronomy and Astrophysics (A&A)

The redshifted 21 cm signal from neutral hydrogen is a direct probe of the physics of the early universe and has been an important science driver of many present and upcoming radio interferometers. In this study we use a single night of observations with the New Extension in Nan\c{c}ay Upgrading LOFAR (NenuFAR) to place upper limits on the 21 cm power spectrum from cosmic dawn at a redshift of $z$ = 20.3. NenuFAR is a new low-frequency radio interferometer, operating in the 10-85 MHz frequency range, currently under construction at the Nan\c{c}ay Radio Observatory in France. It is a phased array instrument with a very dense uv coverage at short baselines, making it one of the most sensitive instruments for 21 cm cosmology analyses at these frequencies. Our analysis adopts the foreground subtraction approach, in which sky sources are modeled and subtracted through calibration and residual foregrounds are subsequently removed using Gaussian process regression. The final power spectra are constructed from the gridded residual data cubes in the uv plane. Signal injection tests are performed at each step of the analysis pipeline, the relevant pipeline settings are optimized to ensure minimal signal loss, and any signal suppression is accounted for through a bias correction on our final upper limits. We obtain a best 2$\sigma$ upper limit of $2.4\times 10^7$ $\text{mK}^{2}$ at $z$ = 20.3 and $k$ = 0.041 $h\,\text{cMpc}^{-1}$. We see a strong excess power in the data, making our upper limits two orders of magnitude higher than the thermal noise limit. We investigate the origin and nature of this excess power and discuss further improvements to the analysis pipeline that can potentially mitigate it and consequently allow us to reach thermal noise sensitivity when multiple nights of observations are processed in the future., Comment: 27 pages, 21 figures, and 6 tables; accepted for publication in Astronomy and Astrophysics (A&A); language edits implemented; typos corrected

Measurement of the redshifted 21-cm signal of neutral hydrogen from the Cosmic Dawn (CD) and Epoch of Reionisation (EoR) promises to unveil a wealth of information about the astrophysical processes during the first billion years of evolution of the universe. The AARTFAAC Cosmic Explorer (ACE) utilises the AARTFAAC wide-field imager of LOFAR to measure the power spectrum of the intensity fluctuations of the redshifted 21-cm signal from the CD at z~18. The RFI from various sources contaminates the observed data and it is crucial to exclude the RFI-affected data in the analysis for reliable detection. In this work, we investigate the impact of non-ground-based transient RFI using cross-power spectra and cross-coherence metrics to assess the correlation of RFI over time and investigate the level of impact of transient RFI on the ACE 21-cm power spectrum estimation. We detected moving sky-based transient RFI sources that cross the field of view within a few minutes and appear to be mainly from aeroplane communication beacons at the location of the LOFAR core in the 72-75 MHz band, by inspecting filtered images. This transient RFI is mostly uncorrelated over time and is only expected to dominate over the thermal noise for an extremely deep integration time of 3000 hours or more with a hypothetical instrument that is sky temperature dominated at 75 MHz. We find no visible correlation over different k-modes in Fourier space in the presence of noise for realistic thermal noise scenarios. We conclude that the sky-based transient RFI from aeroplanes, satellites and meteorites at present does not pose a significant concern for the ACE analyses at the current level of sensitivity and after integrating over the available 500 hours of observed data. However, it is crucial to mitigate or filter such transient RFI for more sensitive experiments aiming for significantly deeper integration., Comment: 13 pages, 9 figures, and 3 tables; accepted for publication in Astronomy and Astrophysics (A&A)

We present a new method, called "forced-spectrum fitting", for physically-based spectral modelling of radio sources during deconvolution. This improves upon current common deconvolution fitting methods, which often produce inaccurate spectra. Our method uses any pre-existing spectral index map to assign spectral indices to each model component cleaned during the multi-frequency deconvolution of WSClean, where the pre-determined spectrum is fitted. The component magnitude is evaluated by performing a modified weighted linear least-squares fit. We test this method on a simulated LOFAR-HBA observation of the 3C196 QSO and a real LOFAR-HBA observation of the 4C+55.16 FRI galaxy. We compare the results from the forced-spectrum fitting with traditional joined-channel deconvolution using polynomial fitting. Because no prior spectral information was available for 4C+55.16, we demonstrate a method for extracting spectral indices in the observed frequency band using "clustering". The models generated by the forced-spectrum fitting are used to improve the calibration of the datasets. The final residuals are comparable to existing multi-frequency deconvolution methods, but the output model agrees with the provided spectral index map, embedding correct spectral information. While forced-spectrum fitting does not solve the determination of the spectral information itself, it enables the construction of accurate multi-frequency models that can be used for wide-band calibration and subtraction., Comment: 17 pages, 9 figures, 5 tables. Accepted for publication in MNRAS

Detecting the 21-cm signal from the Epoch of Reionisation (EoR) is challenging due to the strong astrophysical foregrounds, ionospheric effects, radio frequency interference and instrumental effects. Understanding and calibrating these effects are crucial for the detection. In this work, we introduce a newly developed direction-dependent (DD) calibration algorithm DDECAL and compare its performance with an existing algorithm, SAGECAL, in the context of the LOFAR-EoR 21-cm power spectrum experiment. In our data set, the North Celestial Pole (NCP) and its flanking fields were observed simultaneously. We analyse the NCP and one of its flanking fields. The NCP field is calibrated by the standard pipeline, using SAGECAL with an extensive sky model and 122 directions, and the flanking field is calibrated by DDECAL and SAGECAL with a simpler sky model and 22 directions. Additionally, two strategies are used for subtracting Cassiopeia A and Cygnus A. The results show that DDECAL performs better at subtracting sources in the primary beam region due to the application of a beam model, while SAGECAL performs better at subtracting Cassiopeia A and Cygnus A. This indicates that including a beam model during DD calibration significantly improves the performance. The benefit is obvious in the primary beam region. We also compare the 21-cm power spectra on two different fields. The results show that the flanking field produces better upper limits compared to the NCP in this particular observation. Despite the minor differences between DDECAL and SAGECAL due to the beam application, we find that the two algorithms yield comparable 21-cm power spectra on the LOFAR-EoR data after foreground removal. Hence, the current LOFAR-EoR 21-cm power spectrum limits are not likely to depend on the DD calibration method., Comment: 28 pages, 14 figures, accepted for publication in A&A