Search

This paper verified the possibility of applying chitosan and/or ferulic acid or polycaprolactone (PCL)-based coatings to polydimethylsiloxane/neodymium–iron–boron (PDMS/NdFeB) composites using the spin-coating method. The surface modification of magnetic composites by biofunctional layers allows for the preparation of materials for biomedical applications. Biofunctional layered magnetic composites were obtained in three steps. The spin-coating method with various parameters (time and spin speed) was used to apply different substances to the surface of the composites. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to analyze the thickness and surface topography. The contact angle of the obtained surfaces was tested. Increasing spin speed and increasing process time for the same speed resulted in decreasing the composite's thickness. The linear and surface roughness for the prepared coatings were approximately 0.2 μm and 0.01 μm, respectively, which are desirable values in the context of biocompatibility. The contact angle test results showed that both the addition of chitosan and PCL to PDMS have reduced the contact angle θ from 105° for non-coated composite to θ~59–88° depending on the coating. The performed modifications gave promising results mainly due to making the surface hydrophilic, which is a desirable feature of projected biomaterials. [ABSTRACT FROM AUTHOR]

Background: Microbial biofilms, as a hallmark of cystic fibrosis (CF) lung disease and other chronic infections, remain a desirable target for antimicrobial therapy. These biopolymer-based viscoelastic structures protect pathogenic organisms from immune responses and antibiotics. Consequently, treatments directed at disrupting biofilms represent a promising strategy for combating biofilm-associated infections. In CF patients, the viscoelasticity of biofilms is determined mainly by their polymicrobial nature and species-specific traits, such as Pseudomonas aeruginosa filamentous (Pf) bacteriophages. Therefore, we examined the impact of microbicidal ceragenins (CSAs) supported by mucolytic agents–DNase I and poly-aspartic acid (pASP), on the viability and viscoelasticity of mono- and bispecies biofilms formed by Pf-positive and Pf-negative P. aeruginosa strains co-cultured with Staphylococcus aureus or Candida albicans. Methods: The in vitro antimicrobial activity of ceragenins against P. aeruginosa in mono- and dual-species cultures was assessed by determining minimum inhibitory concentration (MIC) and minimum bactericidal/fungicidal concentration (MBC/MFC). Inhibition of P. aeruginosa mono- and dual-species biofilms formation by ceragenins alone and in combination with DNase I or poly-aspartic acid (pASP) was estimated by the crystal violet assay. Additionally, the viability of the biofilms was measured by colony-forming unit (CFU) counting. Finally, the biofilms' viscoelastic properties characterized by shear storage (G') and loss moduli (G"), were analyzed with a rotational rheometer. Results: Our results demonstrated that ceragenin CSA-13 inhibits biofilm formation and increases its fluidity regardless of the Pf-profile and species composition; however, the Pf-positive biofilms are characterized by elevated viscosity and elasticity parameters. Conclusion: Due to its microbicidal and viscoelasticity-modifying properties, CSA-13 displays therapeutic potential in biofilm-associated infections, especially when combined with mucolytic agents. [ABSTRACT FROM AUTHOR]

Purpose: To create and investigate artificial mucin-based saliva substitutes with properties similar to natural saliva.Materials and Methods: Natural saliva and six saliva preparations were tested. Saliva substitutes were made using phosphate buffered saline (PBS) prepared in deionised water or plasma-treated water (PBSPT) with addition of porcine gastric mucin and guar gum or poloxamer 407. A wide range of properties were characterised: physicochemical (changes of pH, conductivity and surface tension over time: 1, 24, 96, 168 h after mixing ingredients), rheological (viscosity and viscoelasticity), tribological (coefficient of friction for titanium alloy Ti-6Al-7Nb kinematic couple) and corrosive (open circuit potential, corrosion potential, polarisation resistance).Results: Saliva preparations based only on mucin had pH, viscosity, coefficient of friction and corrosion parameters similar to those of natural saliva. Guar gum increased the values of viscosity, viscoelasticity and the coefficient of friction. Similar results were obtained for poloxamer 407, whereas it decreased the surface tension of tested preparations. Plasma-treated PBS enhanced the corrosion resistance of saliva substitutes with guar gum and poloxamer 407.Conclusion: Among the tested compositions, saliva substitutes based only on mucin were found to have parameters similar to human whole saliva. Mucin saliva preparations may have wide applicability for patients with e.g. xerostomia or patients using a metal prosthesis. [ABSTRACT FROM AUTHOR]

Corrosion processes of metallic biomaterials in the oral cavity pose a significant limitation to the life and reliable functioning of dental materials. In this article, the influence of environment bacteria Desulfotomaculum nigrificans sulfate reducing bacteria on the corrosion processes of 316LV steel was assessed. After 14 and 28 days of contact of the material with the bacterial environment, the surfaces of the tested biomaterial were observed by means of confocal scanning laser microscopy, and their chemical composition was studied using X-Ray Photoelectron Spectrometry and a scanning transmission electron microscopy. Corrosive changes, the presence of sulfur (with atomic concentration of 0.5%) on the surface of the biomaterial and the presence of a thin oxide layer (thickness of ∼20 nm) under the surface of the steel were observed. This corrosion layer with significant size reduction of grains was characterized by an increased amount of oxygen (18% mas., p < 0.001) in comparison to untreated 316LV steel (where oxygen concentration − 10% mas.). Image analysis conducted using APHELION software indicated that corrosion pits took up ∼2.8% of the total tested surface. The greatest number of corrosion pits had a surface area within the range of 100-200 μm2. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 222-229, 2017. [ABSTRACT FROM AUTHOR]

The desorption electrospray ionization-mass spectrometry imaging (DESI-MSI) is known as a fast and convenient MS-based method for lipid imaging in various biological materials. Here, we applied this technique to visualize lipid distribution in a vascular graft removed from a patient's body. This is a good example of the DESI system capabilities toward imaging of interaction between artificial material and living tissues. Detailed analysis allowed for visualization of the spatial distribution of selected lipids in this implanted, artificial material. Not only DESI-MSI allowed visualization of lipid distribution in the investigated material but also enabled identification of the detected molecular species using MS/MS. Here, this technique was successfully used to evaluate the saturation and spatial distribution of endogenous lipids in the artificial vascular graft. Unambiguous identification of the lipids was done with the aid of fragmentation procedure. We also showed that various lipids localize preferably in graft material or internal plaque existing inside the graft. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 192-196, 2016. [ABSTRACT FROM AUTHOR]

The present paper describes the results of tests on the influence of human saliva and its substitutes on tribological characteristics of implant materials on the example of the Ti-6Al-4V (a-Ti) titanium alloy. The saliva substitutes were prepared on the basis of pyrophosphates and mucins dissolved in saline buffer. The results of the presented tribological tests show that the values of the parameters under research varied from each other, while much similarity was observed between the evaluated level of wear characteristics after the friction process in the human saliva environment and that in the environment of one of the mucins tested. The microscopic observations of surfaces of the a-Ti samples after friction revealed varied forms of tribological wear. Infrared microspectroscopy studies of surfaces of the a-Ti samples after friction revealed the presence of secondary lubricating films based on mucin found in the artificial saliva solutions. [ABSTRACT FROM AUTHOR]

Background: Magnetic nanoparticles (MNPs) are characterized by unique physicochemical and biological properties that allow their employment as highly biocompatible drug carriers. Gelsolin (GSN) is a multifunctional actin-binding protein involved in cytoskeleton remodeling and free circulating actin sequestering. It was reported that a gelsolin derived phosphoinositide binding domain GSN 160–169, (PBP10 peptide) coupled with rhodamine B, exerts strong bactericidal activity. Results: In this study, we synthesized a new antibacterial and antifungal nanosystem composed of MNPs and a PBP10 peptide attached to the surface. The physicochemical properties of these nanosystems were analyzed by spectroscopy, calorimetry, electron microscopy, and X-ray studies. Using luminescence based techniques and a standard killing assay against representative strains of Gram-positive (Staphylococcus aureus MRSA Xen 30) and Gram-negative (Pseudomonas aeruginosa Xen 5) bacteria and against fungal cells (Candida spp.) we demonstrated that magnetic nanoparticles significantly enhance the effect of PBP10 peptides through a membrane-based mode of action, involving attachment and interaction with cell wall components, disruption of microbial membrane and increased uptake of peptide. Our results also indicate that treatment of both planktonic and biofilm forms of pathogens by PBP10-based nanosystems is more effective than therapy with either of these agents alone. Conclusions: The results show that magnetic nanoparticles enhance the antimicrobial activity of the phosphoinositide-binding domain of gelsolin, modulate its mode of action and strengthen the idea of its employment for developing the new treatment methods of infections. [ABSTRACT FROM AUTHOR]