Search

The study presents an analysis specifically on the effect of tool traverse speed (one of the most influential process parameters of friction stir processing) on the microstructural evolution, micro...

In this paper, a composite material is developed through fused deposition model (FDM). The E – glass fibre is used impregnate in the polylactic acid (PLA) plastic as a composite. The material is developed as per the ASTM standard for mechanical testing. The layer thickness (mm), feed speed (mm/min) and the extruder temperature (°C) are the three main input process parameters used to develop the composite material. The samples developed are ensured to standard dimensions before investigation on mechanical testing. Fusion temperature and layer thickness are the two main input process parameters for making FDM samples. With a minimum layer (0.1 mm) and maximum extruder temperature (201 °C) the FDM processed sample found increased strength. Decrease in temperature cause weak bonding and lead to failure.

The large-scale generation of electric power using solar energy stimulates the development of novel technologies by researchers with ultimate resource qualities. Solar energy collectors are the significant part of Solar Energy Thermal Power Plant (STP), which can be operated at a particular feasible range for utilizing the solar resource with its intermittent inputs. The life span of solar thermal power plant can be increased by designing the controller with a closed loop. The proposed hybrid design of solar plant involves a controller with closed loop transferring the solar energy to the heat transfer liquid, namely therminol oil, which acts as a medium for transferring heat in Parabolic Trough Collector (PTC) having single-phase flow. The concentrators are the parabolic reflectors focusing the rays on the line with a focal point using tracking mechanism having one axis. Solar collectors are utilized in the power converting technique of solar thermal energy, which concentrates sunlight for preparing Rankine cycle heat of high temperature. The steam turbine is driven by the superheated vapor using Rankine cycle with the shaft of the steam turbine connected to the generator for producing electricity. The life span of the Solar Energy Thermal Power Plant is enhanced as proposed design for solar collectors uses therminol oil as the heat transfer liquid. The controller design is implemented using Predictive Function Control (PFC) or Static Feed Forward (SFF) control with Proportional Integral Controller (PI) which provides the best performance with the added advantage of direct heat storage in the thermal plant. The simulated results are obtained for the proposed design of collector with the rate of change of variation and cost function of manipulated parameters, which are constant for the proposed controller but vary drastically for the conventional PI controller.

The objective of the present work is to investigate theoretically the MHD convective flow and heat transfer of an incompressible viscous nanofluid past a porous vertical stretching sheet in the presence of variable stream condition due to solar radiation (incident radiation). The governing equations are derived using the usual boundary-layer and Boussinesq approximations and accounting for the presence of an applied magnetic field and incident radiation flux. The absorbed radiation acts as a distributed source which initiates buoyancy-driven flow and convection in the absorbed layer. The partial differential equations governing the problem under consideration are transformed by a special form of Lie symmetry group transformations viz. one-parameter group of transformation into a system of ordinary differential equations which are solved numerically using Runge Kutta Gill based shooting method. The conclusion is drawn that the flow field and temperature are significantly influenced by radiation, heat source and magnetic field.

The problem of laminar fluid flow, which results from the stretching of a vertical surface with variable stream conditions in a nanofluid due to solar energy, is investigated numerically. The model used for the nanofluid incorporates the effects of the Brownian motion and thermophoresis in the presence of thermal stratification. The symmetry groups admitted by the corresponding boundary value problem are obtained by using a special form of Lie group transformations, namely, the scaling group of transformations. An exact solution is obtained for the translation symmetrys, and the numerical solutions are obtained for the scaling symmetry. This solution depends on the Lewis number, the Brownian motion parameter, the thermal stratification parameter, and the thermophoretic parameter. The conclusion is drawn that the flow field, the temperature, and the nanoparticle volume fraction profiles are significantly influenced by these parameters. Nanofluids have been shown to increase the thermal conductivity and convective heat transfer performance of base liquids. Nanoparticles in the base fluids also offer the potential in improving the radiative properties of the liquids, leading to an increase in the efficiency of direct absorption solar collectors.

An analysis is presented to investigate the effects of thermophoresis variable viscosity on MHD mixed convective heat and mass transfer of a viscous, incompressible and electrically conducting fluid past a porous wedge in the presence of chemical reaction. The wall of the wedge is embedded in a uniform porous medium in order to allow for possible fluid wall suction or injection. The governing boundary layer equations are written into a dimensionless form by local non-similarity transformations. The transformed coupled nonlinear ordinary differential equations are solved numerically by using the R.K. Gill and shooting methods. Favorable comparison with previously published work is performed. Numerical results for the dimensionless velocity, temperature and concentration profiles are obtained and displayed graphically for pertinent parameters to show interesting aspects of the solution.